HUAWEI-SUPERLAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
29

hwSuperLagTable

table
.1.3.6.1.4.1.2011.5.25.178.1.1 · 1 row entry · 21 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSuperLagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SUPERLAG-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SUPERLAG-MIB::hwSuperLagTable' 
The super LAG table.
hwSuperLagEntry row .1.3.6.1.4.1.2011.5.25.178.1.1.1
Super LAG entry.
Indexes
Column Syntax OID
hwSuperLagId
The ID of the super LAG, it is the index of the super LAG.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.1
hwSuperLagSystemId
The system ID of the super LAG, it is a physical address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.2
hwSuperLagPri
The priority of the super LAG. The default is 100.
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.3
hwSuperLagStatus
The status of the super LAG.
1:initialize
2:backup
3:master
Enumeration
Enumerated Values:
1initialize
2backup
3master
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.4
hwSuperLagStatusReason
The reason for the super LAG is in the current status.
pri(1):Priority calculation
timeout(2):Receiving timer timeout
bfdDown(3):BFD detected the control link between the PE and peer down
peerTimeout(4):Receiving time…
Enumeration
Enumerated Values:
1pri
2timeout
3bfdDown
4peerTimeout
5peerBfdDown
6allMemberDown
7init
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.5
hwSuperLagPeerIpAddr
The IP address of the peer super LAG.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.6
hwSuperLagSourceIpAddr
The source IP address of the super LAG.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.7
hwSuperLagReceiveFailTimeMultiple
The fail time of the super LAG for receiving packets. It is the multiple of sending period.
Integer32r/w
Constraints:
range: 3-50
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.8
hwSuperLagSendPeriod
The period for sending packets of the super LAG. The unit is 100ms
Integer32r/w
Constraints:
range: 5-100
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.9
hwSuperLagPacketReceive
The number of the received packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.10
hwSuperLagPacketSend
The number of the sending packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.11
hwSuperLagPacketRecDrop
The number of the droped packets when the packets are received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.12
hwSuperLagPacketSndDrop
The number of the droped packets when the packets are send out.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.13
hwSuperLagPeerSystemId
The system ID of peer super LAG,it is a physical address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.14
hwSuperLagPeerPri
The priority of the peer super LAG.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.15
hwSuperLagPeerReceiveFailTime
The fail time of the peer super LAG for receiving packets.The unit is 100ms
Integer32
Constraints:
range: 15-5000
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.16
hwSuperLagSecurityKeyType
The mode of the security key.
1:The simple encrypt mode;
2:The cipher encrypt mode.
Enumerationr/w
Enumerated Values:
1simple
2cipher
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.17
hwSuperLagSecurityKey
This is the security key. It is must be hex number and the most number is 16.
If hwSuperLagSecurityKeyType is simple, you can get the key.
If hwSuperLagSecurityKeyType is cipher, the system returns a random character st…
OctetStringr/w
Constraints:
range: 1-24
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.18
hwSuperLagBfdSessId
The ID of BFD session which is bind to a super LAG. When the status of the link is changed, BFD will notify super LAG.
Integer32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.19
hwSuperLagResetCounter
Reset hwSuperLagPacketReceive,hwSuperLagPacketSend,hwSuperLagPacketRecDrop,hwSuperLagPacketSndDrop.
Integer32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.20
hwSuperLagRowStatus
Current operation status of the row.Used to manage the creation and deletion of conceptual rows.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.178.1.1.1.50

hwSuperLagMemberTable

table
.1.3.6.1.4.1.2011.5.25.178.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSuperLagMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SUPERLAG-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SUPERLAG-MIB::hwSuperLagMemberTable' 
The member table of a super LAG.
hwSuperLagMemberEntry row .1.3.6.1.4.1.2011.5.25.178.1.2.1
Member Entry.
Indexes
Column Syntax OID
hwSuperLagMemberParentSuperLagId
The ID of the super LAG which the member is belonged to.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.1
hwSuperLagMemberType
The type of the member. Now is EthTrunk only.
1:EthTrunk
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.2
hwSuperLagMemberId
The ID of the member.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.3
hwSuperLagMemberStatus
The member status.
1:backup
2:master.
Enumeration
Enumerated Values:
1backup
2master
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.4
hwSuperLagMemberStatusReason
The reason for the member is in the current status.
forceBackup(1):The work mode of the member is force-backup
forceMaster(2):The work mode of the member is force-master
suplagInit(3):The work mode of the member is au…
Enumeration
Enumerated Values:
1forceBackup
2forceMaster
3suplagInit
4suplagBackup
5suplagMaster
6peerMemberDown
7peerMemberUp
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.5
hwSuperLagMemberWorkMode
The work mode of the member.
1:auto
2:forceBackup
3:forceMaster
Enumerationr/w
Enumerated Values:
1auto
2forceBackup
3forceMaster
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.6
hwSuperLagMemberLocaPhylLinkStatus
The local physical link status of the member.
1:up
2:down
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.7
hwSuperLagMemberRowStatus
Current operation status of the row.Used to manage the creation and deletion of conceptual rows.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.178.1.2.1.50