HUAWEI-PERFORMANCE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
15
prialarmTable
table
.1.3.6.1.4.1.2011.1.3.4.4.1
·
1 row entry
·
15 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk prialarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PERFORMANCE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PERFORMANCE-MIB::prialarmTable'
A list of alarm entries.
A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
An index that uniquely identifies an entry in the
alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. |
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.1 |
||||||||
|
The interval in seconds over which the data is
sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be s… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.2 |
||||||||
|
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. … |
RFC1213-MIBDisplayStringr/w | .1.3.6.1.4.1.2011.1.3.4.4.1.1.3 |
||||||||
|
The string which the alarm line described.
|
RFC1213-MIBDisplayStringr/w | .1.3.6.1.4.1.2011.1.3.4.4.1.1.4 |
||||||||
|
The method of sampling the selected variable and
calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directl… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.1.3.4.4.1.1.5 |
||||||||
|
The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample ty… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.6 |
||||||||
|
The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or r… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.1.3.4.4.1.1.7 |
||||||||
|
A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generat… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.8 |
||||||||
|
A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generat… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.9 |
||||||||
|
The index of the eventEntry that is
used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.10 |
||||||||
|
The index of the eventEntry that is
used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If ther… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.11 |
||||||||
|
The time alarm line exists. When the value
of prialarmStatType is during(2),set prialarmStatCycle to decide how long the alarm line exists. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.12 |
||||||||
|
It expresses alarm state type.To choose forever(1)
, the alarm line will exist forever. To choose during(2) , the alarm line will be deleted after the time setting for 'prialarmStatCycle'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.1.3.4.4.1.1.13 |
||||||||
|
The entity that configured this entry and is therefore
using the resources assigned to it. |
IF-MIBOwnerStringr/w Type Constraints: range: 0..255Description: This data type is used to model an administratively assigned name of the owner of a resource. This information is taken from the NVT ASCII character set. It is suggested that this name contain one or more of the follo… |
.1.3.6.1.4.1.2011.1.3.4.4.1.1.14 |
||||||||
|
The status of this alarm entry.
|
RMON-MIBEntryStatusr/w Type Values:
|
.1.3.6.1.4.1.2011.1.3.4.4.1.1.15 |
