HUAWEI-OSPFV3-MIB Table View

Information describing the configured  
parameters and cumulative statistics of the router's 
attached areas.

hwOspfv3AreaEntry row .1.3.6.1.4.1.2011.5.25.147.1.2.1

Information describing the configured
parameters and cumulative statistics of one of the
router's attached areas.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3AreaId A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.	HWOspfv3AreaIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.1
hwOspfv3AreaImportAsExtern Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which have Area-scope	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.2.1.2
hwOspfv3AreaSpfRuns The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.3
hwOspfv3AreaBdrRtrCount The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.4
hwOspfv3AreaAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.5
hwOspfv3AreaScopeLsaCount The total number of Area-Scope link state advertisements in this area's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.6
hwOspfv3AreaScopeLsaCksumSum The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state da…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.7
hwOspfv3AreaSummary The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate…	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.2.1.8
hwOspfv3AreaRowStatus This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.147.1.2.1.9
hwOspfv3AreaStubMetric The metric value advertised for the default route into Stub and NSSA areas.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.2011.5.25.147.1.2.1.10
hwOspfv3AreaNssaTranslatorRole Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.2.1.11
hwOspfv3AreaNssaTranslatorState Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA border router's ospfv3AreaNssaTranslatorRole has been set to …	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.2.1.12
hwOspfv3AreaNssaTranslatorStabInterval The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to perform its translation duties.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.13
hwOspfv3AreaNssaTranslatorEvents Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this counter can occur at re-initialization of the management sy…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.2.1.14

The OSPFv3 Process's AS-Scope Link State Database.

hwOspfv3AsLsdbEntry row .1.3.6.1.4.1.2011.5.25.147.1.3.1

A single AS-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. AS-Scope LSAs not recognized by the router may be stored in the database.	Unsigned32	.1.3.6.1.4.1.2011.5.25.147.1.3.1.1
hwOspfv3AsLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.3.1.2
hwOspfv3AsLsdbLsId The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.3.1.3
hwOspfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more rece…	HWOspfv3LsaSequenceTC	.1.3.6.1.4.1.2011.5.25.147.1.3.1.4
hwOspfv3AsLsdbAge This field is the age of the link state advertisement in seconds.	secondsHWOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.2011.5.25.147.1.3.1.5
hwOspfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The check…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.147.1.3.1.6
hwOspfv3AsLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.4.1.2011.5.25.147.1.3.1.7
hwOspfv3AsLsdbTypeKnown Indicates whether the LSA type is recognized by this Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.147.1.3.1.8

The OSPFv3 Process's Area-Scope Link State Database.

hwOspfv3AreaLsdbEntry row .1.3.6.1.4.1.2011.5.25.147.1.4.1

A single Area-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3AreaLsdbAreaId The 32-bit identifier of the Area from which the LSA was received.	HWOspfv3AreaIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.4.1.1
hwOspfv3AreaLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored in this database.	Unsigned32	.1.3.6.1.4.1.2011.5.25.147.1.4.1.2
hwOspfv3AreaLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.4.1.3
hwOspfv3AreaLsdbLsId The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.4.1.4
hwOspfv3AreaLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more rec…	HWOspfv3LsaSequenceTC	.1.3.6.1.4.1.2011.5.25.147.1.4.1.5
hwOspfv3AreaLsdbAge This field is the age of the link state advertisement in seconds.	secondsHWOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.2011.5.25.147.1.4.1.6
hwOspfv3AreaLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The check…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.147.1.4.1.7
hwOspfv3AreaLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.4.1.2011.5.25.147.1.4.1.8
hwOspfv3AreaLsdbTypeKnown Indicates whether the LSA type is recognized by this Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.147.1.4.1.9

The OSPFv3 Process's Link-Scope Link State Database.

hwOspfv3LinkLsdbEntry row .1.3.6.1.4.1.2011.5.25.147.1.5.1

A single Link-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3LinkLsdbIfIndex The identifier of the link from which the LSA was received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.5.1.1
hwOspfv3LinkLsdbIfInstId The identifier of the interface instance from which the LSA was received.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.5.1.2
hwOspfv3LinkLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Link-Scope LSAs unrecognized by the router are also stored in this database.	Unsigned32	.1.3.6.1.4.1.2011.5.25.147.1.5.1.3
hwOspfv3LinkLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.5.1.4
hwOspfv3LinkLsdbLsId The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addr…	HWOspfv3LsIdTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.5.1.5
hwOspfv3LinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more rece…	HWOspfv3LsaSequenceTC	.1.3.6.1.4.1.2011.5.25.147.1.5.1.6
hwOspfv3LinkLsdbAge This field is the age of the link state advertisement in seconds.	secondsHWOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.2011.5.25.147.1.5.1.7
hwOspfv3LinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The check…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.147.1.5.1.8
hwOspfv3LinkLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.4.1.2011.5.25.147.1.5.1.9
hwOspfv3LinkLsdbTypeKnown Indicates whether the LSA type is recognized by this Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.147.1.5.1.10

The OSPFv3 Interface Table describes the  
interfaces from the viewpoint of OSPFv3.

hwOspfv3IfEntry row .1.3.6.1.4.1.2011.5.25.147.1.6.1

The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.6.1.1
hwOspfv3IfInstId Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.6.1.2
hwOspfv3IfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.	HWOspfv3AreaIdTcr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.3
hwOspfv3IfType The OSPFv3 interface type.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.6.1.4
hwOspfv3IfAdminStatus The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.147.1.6.1.5
hwOspfv3IfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router o…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.6.1.6
hwOspfv3IfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	secondsHWOspfv3UpToRefreshIntervalTcr/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.6.1.7
hwOspfv3IfRetransInterval The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets.	secondsHWOspfv3UpToRefreshIntervalTcr/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.6.1.8
hwOspfv3IfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	secondsHWHelloRanger/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.25.147.1.6.1.9
hwOspfv3IfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same …	secondsHWOspfv3DeadIntRangeTcr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.25.147.1.6.1.10
hwOspfv3IfState The OSPFv3 Interface State.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.6.1.11
hwOspfv3IfDesignatedRouter The Router ID of the Designated Router.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.12
hwOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated Router.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.13
hwOspfv3IfEvents The number of times this OSPFv3 interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.14
hwOspfv3IfRowStatus This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.147.1.6.1.15
hwOspfv3IfMetricValue The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3ReferenceBandwidth object.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.25.147.1.6.1.16
hwOspfv3IfLinkScopeLsaCount The total number of Link-Scope link state advertisements in this link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.17
hwOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state da…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.18
hwOspfv3IfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.6.1.19
hwOspfv3IfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point to point and NBMA inte…	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.6.1.20

Information about this router's virtual 
interfaces.

hwOspfv3VirtIfEntry row .1.3.6.1.4.1.2011.5.25.147.1.7.1

Information about a single Virtual Interface.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3VirtIfAreaId The Transit Area that the Virtual Link traverses. By definition, this is not Area 0	HWOspfv3AreaIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.7.1.1
hwOspfv3VirtIfNeighbor The Router ID of the Virtual Neighbor.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.7.1.2
hwOspfv3VirtIfIndex The local interface index assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtual link and in the router's router-LSAs.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.7.1.3
hwOspfv3VirtIfInstId Specifies the interface instance ID to be used for the virtual interface. This ID has local link significance only.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.7.1.4
hwOspfv3VirtIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	secondsHWOspfv3UpToRefreshIntervalTcr/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.7.1.5
hwOspfv3VirtIfRetransInterval The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. T…	secondsHWOspfv3UpToRefreshIntervalTcr/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.7.1.6
hwOspfv3VirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.2011.5.25.147.1.7.1.7
hwOspfv3VirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual n…	secondsHWOspfv3DeadIntRangeTcr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.25.147.1.7.1.8
hwOspfv3VirtIfState OSPFv3 virtual interface states. The same encoding as the hwOspfv3IfTable is used.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.7.1.9
hwOspfv3VirtIfEvents The number of state changes or error events on this Virtual Link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.7.1.10
hwOspfv3VirtIfRowStatus This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.147.1.7.1.11
hwOspfv3VirtIfLinkScopeLsaCount The total number of Link-Scope link state advertisements in this virtual link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.7.1.12
hwOspfv3VirtIfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.7.1.13

A table of non-virtual neighbor information.

hwOspfv3NbrEntry row .1.3.6.1.4.1.2011.5.25.147.1.8.1

The information regarding a single neighbor.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3NbrIfIndex The local link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.8.1.1
hwOspfv3NbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.8.1.2
hwOspfv3NbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.8.1.3
hwOspfv3NbrAddressType The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.25.147.1.8.1.4
hwOspfv3NbrAddress The IPv6 address of the neighbor associated with the local link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.8.1.5
hwOspfv3NbrOptions A Bit Mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.147.1.8.1.6
hwOspfv3NbrPriority The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.8.1.7
hwOspfv3NbrState The State of the relationship with this Neighbor.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.8.1.8
hwOspfv3NbrEvents The number of times this neighbor relationship has changed state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.8.1.9
hwOspfv3NbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.8.1.10
hwOspfv3NbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.147.1.8.1.11
hwOspfv3NbrIfId The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.8.1.12
hwOspfv3NbrRestartHelperStatus Indicates whether the router is acting as a Graceful restart helper for the neighbor.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.8.1.13
hwOspfv3NbrRestartHelperAge Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsHWOspfv3UpToRefreshIntervalTc Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.8.1.14
hwOspfv3NbrRestartHelperExitRc Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. - none: No restart has yet been attempted. - inProgress: A restart attempt is currently underway. - completed: The last …	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.8.1.15

A table of configured, non-virtual neighbor 
information.

hwOspfv3CfgNbrEntry row .1.3.6.1.4.1.2011.5.25.147.1.9.1

The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3CfgNbrIfIndex The local link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.9.1.1
hwOspfv3CfgNbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.9.1.2
hwOspfv3CfgNbrRtrId A 32-bit integer uniquely identifying the static neighbor router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.9.1.3
hwOspfv3CfgNbrPriority The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.9.1.4
hwOspfv3CfgNbrRowStatus This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.147.1.9.1.5

A table of virtual neighbor information.

hwOspfv3VirtNbrEntry row .1.3.6.1.4.1.2011.5.25.147.1.10.1

Virtual neighbor information.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3VirtNbrArea The Transit Area Identifier.	HWOspfv3AreaIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.10.1.1
hwOspfv3VirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	HWOspfv3RouterIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.10.1.2
hwOspfv3VirtNbrIfIndex The local interface ID for the virtual link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.10.1.3
hwOspfv3VirtNbrIfInstId The interface instance for the virtual link over which the neighbor can be reached.	HWOspfv3IfInstIdTc Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.10.1.4
hwOspfv3VirtNbrAddressType The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.25.147.1.10.1.5
hwOspfv3VirtNbrAddress The IPv6 address advertised by this Virtual Neighbor. It must be a Global scope address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.10.1.6
hwOspfv3VirtNbrOptions A Bit Mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.147.1.10.1.7
hwOspfv3VirtNbrState The state of the Virtual Neighbor Relationship.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.10.1.8
hwOspfv3VirtNbrEvents The number of times this virtual link has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.10.1.9
hwOspfv3VirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.10.1.10
hwOspfv3VirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.147.1.10.1.11
hwOspfv3VirtNbrIfId The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.147.1.10.1.12
hwOspfv3VirtNbrRestartHelperStatus Indicates whether the router is acting as a Graceful restart helper for the neighbor.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.10.1.13
hwOspfv3VirtNbrRestartHelperAge Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsHWOspfv3UpToRefreshIntervalTc Type Constraints: range: 0..3600	.1.3.6.1.4.1.2011.5.25.147.1.10.1.14
hwOspfv3VirtNbrRestartHelperExitRc Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently u…	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.10.1.15

A range of IPv6 prefixes specified by a 
prefix/prefix length pair. Note that if 
ranges are configured such that one range 
subsumes another range the most specific 
match is the preferred one.

hwOspfv3AreaAggregateEntry row .1.3.6.1.4.1.2011.5.25.147.1.11.1

A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific match is
the preferred one.

Indexes

No indexes recorded

Column	Syntax	OID
hwOspfv3AreaAggregateAreaId The Area the Address Aggregate is to be found within.	HWOspfv3AreaIdTc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.147.1.11.1.1
hwOspfv3AreaAggregateAreaLsdbType The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Aggregate applies to.	Enumeration	.1.3.6.1.4.1.2011.5.25.147.1.11.1.2
hwOspfv3AreaAggregatePrefixType The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.25.147.1.11.1.4
hwOspfv3AreaAggregatePrefix The IPv6 Prefix.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.25.147.1.11.1.5
hwOspfv3AreaAggregatePrefixLength The length of the prefix (in bits). A prefix can not be shorter than 0 bits.	bitsUnsigned32	.1.3.6.1.4.1.2011.5.25.147.1.11.1.6
hwOspfv3AreaAggregateRowStatus This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.147.1.11.1.7
hwOspfv3AreaAggregateEffect Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching), or result in the prefix not being advertised at all outside the area.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.147.1.11.1.8