HUAWEI-OSPFV2-MIB Table View

Information describes the configured parameters of the router's attached OSPF processes.

hwOspfv2ProcessEntry row .1.3.6.1.4.1.2011.5.25.155.3.1

Information describes the configured parameters of the router's attached OSPF processes.

Indexes

hwOspfv2ProcessIdIndex

Column	Syntax	OID
hwOspfv2ProcessIdIndex The process ID indicates the OSPF process number. The value ranges from 1 to 4294967295.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.3.1.1
hwOspfv2VpnName The name of VPN instance to which the process belongs. The process instance needs to be specified when the process is created, and then cannot be changed.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.155.3.1.2
hwOspfv2ConfigRouterId A 32-bit integer uniquely identifies the router in the Autonomous System. OSPF private router ID can be configured through this node. The default value is 0.0.0.0. If the value of this node is 0.0.0.0, it means that no…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.3.1.3
hwOspfv2ActualRouterId This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, the actual router ID should default to the value of one of the router's IP interface addres…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.3.1.4
hwOspfv2BandwidthReference The reference value that is used to calculate the link cost. If there is no explicit link cost, OSPF calculates the cost according to the bandwidth of the link (cost = reference value (M)/bandwidth).	Mbit/sSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.3.1.5
hwOspfv2Description The description of the OSPF process.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.155.3.1.6
hwOspfv2LsaArriveIntvl To avoid wasting network resources due to network changes, OSPF defines that the interval for receiving LSAs is 1 second. In a stable network, if the fast speed of route convergence is required, you can cancel the inter…	millionSecondInteger32r/w Constraints: range: -1-10000	.1.3.6.1.4.1.2011.5.25.155.3.1.7
hwOspfv2LsaArriveMaxIntvl This object indicates the maximum interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, b…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-120000	.1.3.6.1.4.1.2011.5.25.155.3.1.8
hwOspfv2LsaArriveStartIntvl This object indicates the initial interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is specified, you need also specify hwOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveHoldIntvl, bu…	millionSecondInteger32r/w Constraints: range: -1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.9
hwOspfv2LsaArriveHoldIntvl This object indicates the Holdtime interval of intelligent-timer for receiving OSPF LSAs. After an intelligent timer is enabled, the interval for receiving LSAs is as follows: The initial interval for receiving LSAs i…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.10
hwOspfv2LsaOrigIntvl To avoid wasting network source due to network changes, OSPF defines that the interval for updating LSAs is 5 seconds. In a stable network, if the speed of route convergence is required to be fast, you can cancel the i…	millionSecondInteger32r/w Constraints: range: -1-0	.1.3.6.1.4.1.2011.5.25.155.3.1.11
hwOspfv2LsaOrigMaxIntvl This object indicates the maximum interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specified, you need also specify hwOspfv2LsaOrigStartIntvl and hwOspfv2LsaOrigHoldIntvl, but you c…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-120000	.1.3.6.1.4.1.2011.5.25.155.3.1.12
hwOspfv2LsaOrigStartIntvl This object indicates the initial interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigHoldIntvl, but you ca…	millionSecondInteger32r/w Constraints: range: -1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.13
hwOspfv2LsaOrigHoldIntvl This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, the interval for updating LSAs is as follows: The initial interval for updating LSAs is s…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.14
hwOspfv2LsaOrigIntvlOtherType This object indicates the interval for updating LSAs, excluding OSPF router LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType and hwOspfv2LsaOrigIntvl cannot be specified together. Here -1 indicated that hwOspfv2Ls…	secondInteger32r/w Constraints: range: -1-10	.1.3.6.1.4.1.2011.5.25.155.3.1.15
hwOspfv2LsdbOverflowLimit The maximum number of external LSAs in OSPF LSDB. When this node is set to 0, it means that no limits exist.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.2011.5.25.155.3.1.16
hwOspfv2MaxLoadBalaNumber The maximum number of equal-cost routes to a destination in the routing table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.155.3.1.17
hwOspfv2AseRouteMaxNumber The maximum number of ASE routes that are supported by OSPF.	Integer32r/w Constraints: range: 100-5000000	.1.3.6.1.4.1.2011.5.25.155.3.1.18
hwOspfv2InterRouteMaxNumber The maximum number of inter-area routes that are supported by OSPF.	Integer32r/w Constraints: range: 100-1000000	.1.3.6.1.4.1.2011.5.25.155.3.1.19
hwOspfv2IntraRouteMaxNumber The maximum number of intra-area routes that are supported by OSPF.	Integer32r/w Constraints: range: 100-100000	.1.3.6.1.4.1.2011.5.25.155.3.1.20
hwOspfv2RetransLimitMaxNumber The maximum count of retransmission. The value is an integer that ranges from 2 to 255. When the retransmission limit is disabled, the value is set to 0.	Integer32r/w Constraints: range: 0-0 range: 2-255	.1.3.6.1.4.1.2011.5.25.155.3.1.21
hwOspfv2Rfc1583Compatibility It is used to enable the routing rule for compatible RFC 1583.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.3.1.22
hwOspfv2ShamHello It is used to enable the sham-hello feature of OSPF. After the feature is enabled, OSPF updates the timeout timer of the neighbor when receiving protocol packets of various types.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.3.1.23
hwOspfv2SpfSchIntvlUnit The value of the object identifies the interval unit for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalNumber. By default, this object is none, indicating that an intelli…	Enumerationr/w Enumerated Values: 1 second 2 millionSecond 3 none	.1.3.6.1.4.1.2011.5.25.155.3.1.24
hwOspfv2SpfSchIntvlNumber The value of the object identifies the interval for OSPF to calculate routes. This object must be specified together with hwOspfv2SpfSchIntervalUnit. By default, this object is -1, indicating that an intelligent timer…	Integer32r/w Constraints: range: -1-10000	.1.3.6.1.4.1.2011.5.25.155.3.1.25
hwOspfv2SpfSchMaxIntvl This object indicates the maximum interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchMaxIntvl is specified, you need also specify hwOspfv2SpfSchStartIntvl and hwOspfv2SpfSchHoldI…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-120000	.1.3.6.1.4.1.2011.5.25.155.3.1.26
hwOspfv2SpfSchStartIntvl This object indicates the initial interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchStartIntvl is specified, you need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchHoldI…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.27
hwOspfv2SpfSchHoldIntvl This object indicates the Holdtime interval of intelligent timer for OSPF to perform the SPF calculation. After an intelligent timer is enabled, the interval for the SPF calculation is as follows: The initial interval…	millionSecondInteger32r/w Constraints: range: -1--1 range: 1-60000	.1.3.6.1.4.1.2011.5.25.155.3.1.28
hwOspfv2OpaqueCapability It is used to enable opaque-LSAs capability. When the capability is enabled, then the OSPF process can generate opaque LSAs and process the opaque LSAs received from neighbors.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.3.1.29
hwOspfv2TrafficAdjustment It is used to enable IGP-shortcut feature. The value false means disable. Otherwise, the value true means enable. If you want to set this node to false, please check whether Local MT feature is disabled. When Local MT…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.3.1.30
hwOspfv2TrafficAdvertise It is used to enable IGP-shortcut and Forwarding Adjacency feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.3.1.31
hwOspfv2FlushTimer The value of the flush timer. When configuring or undoing OSPF process, flush self-originated LSAs first. If the timer expires, stop flushing LSAs, and then reset the process. This timer is one-off. When flushing is fi…	Integer32r/w Constraints: range: 0-40	.1.3.6.1.4.1.2011.5.25.155.3.1.32
hwOspfv2ProcessRowStatus This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new process. If the process is created successfully, the value of this node changes t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.155.3.1.33

Information describes the configured parameters of the router's attached OSPF areas.

hwOspfv2AreaEntry row .1.3.6.1.4.1.2011.5.25.155.4.1

Information describes the configured parameters of the router's attached OSPF areas.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex

Column	Syntax	OID
hwOspfv2AreaIdIndex A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.4.1.1
hwOspfv2AreaType Specify the type of area: nssa(1), stub(2), normal(3).	Enumerationr/w Enumerated Values: 1 nssa 2 stub 3 normal	.1.3.6.1.4.1.2011.5.25.155.4.1.2
hwOspfv2AreaNoSummary This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an ABR. This also prevents the ABR from transmitting Summary LSA (Type-3 LSA) to the NSSA or S…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.3
hwOspfv2AreaNssaFlushTimer The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If the timer expires, stop flushing LSAs, and then reset the area. This timer is one-off. When …	Integer32r/w Constraints: range: 0-40	.1.3.6.1.4.1.2011.5.25.155.4.1.4
hwOspfv2AreaNssaDefAdvertise This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it must originate Type-7 LSAs, while for ASBR router only if the route to 0.0.0.0 exists, it sh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.5
hwOspfv2AreaNssaNoImportRoute This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the external route cannot be advertised to the NSSA area.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.6
hwOspfv2AreaNssaTransAlways This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NSSA border router. When hwOspfAreaNssaTranslateAlways is set to true, Type-7 LSAs are always…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.7
hwOspfv2AreaNssaTransTimer This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable translator transition. If the area type is not NSSA, the default valu…	Integer32r/w Constraints: range: 0-120	.1.3.6.1.4.1.2011.5.25.155.4.1.8
hwOspfv2AreaNssaAllowFaZero When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LSAs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.9
hwOspfv2AreaNssaSuppressFa When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs into Type-5 LSAs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.10
hwOspfv2AreaNssaSetNBit When this node is set to true, N-bit should be set in the option when sending DD packets.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.155.4.1.11
hwOspfv2AreaDefCost This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777214. The default value is -1.	Integer32r/w Constraints: range: -1-16777214	.1.3.6.1.4.1.2011.5.25.155.4.1.12
hwOspfv2AreaDescription This node is used to specify the description of the area.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.155.4.1.13
hwOspfv2AreaFilterExpAcl This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that leave the area. It is inco…	Integer32r/w Constraints: range: 0-0 range: 2000-2999	.1.3.6.1.4.1.2011.5.25.155.4.1.14
hwOspfv2AreaFilterExpPrefix This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAc…	OctetStringr/w Constraints: range: 0-169	.1.3.6.1.4.1.2011.5.25.155.4.1.15
hwOspfv2AreaFilterExpPolicy This object indicates the name of the routing policy. The name is a string of 1 to 200 characters. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hw…	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.2011.5.25.155.4.1.16
hwOspfv2AreaFilterImpAcl This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configuration. The object is used to filter the Summary LSAs that enter the area. It is incompati…	Integer32r/w Constraints: range: 0-0 range: 2000-2999	.1.3.6.1.4.1.2011.5.25.155.4.1.17
hwOspfv2AreaFilterImpPrefix This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAc…	OctetStringr/w Constraints: range: 0-169	.1.3.6.1.4.1.2011.5.25.155.4.1.18
hwOspfv2AreaFilterImpPolicy This object indicates the name of the routing policy. The name is a string of 1 to 200 characters. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hw…	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.2011.5.25.155.4.1.19
hwOspfv2AreaAuthModeType The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher mode. hmd5(4): indicates the hmac-md5 cipher mode. keychain(5…	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5 4 hmd5 5 keychain 6 hmacSha256	.1.3.6.1.4.1.2011.5.25.155.4.1.20
hwOspfv2AreaAuthPasswordType Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain text authentication key on the node hwOspfAreaAuthText. When viewing the configuration file,…	Enumerationr/w Enumerated Values: 1 none 2 plainText 3 cipherText	.1.3.6.1.4.1.2011.5.25.155.4.1.21
hwOspfv2AreaAuthKeyId Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 to 255. The default value 0 means no configuration.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.155.4.1.22
hwOspfv2AreaAuthText In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 characters in cipher text. In MD5 or HMAC-MD5 or HMAC-SHA256 authentication, this object a…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.155.4.1.23
hwOspfv2AreaMplsTe The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected if it has more than one Top level TLV. stdDisable(…	Enumerationr/w Enumerated Values: 1 disable 2 stdEnable 3 stdDisable	.1.3.6.1.4.1.2011.5.25.155.4.1.24
hwOspfv2AreaAreaRowStatus This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new area. If the area is created successfully, the value of this node changes to acti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.155.4.1.25
hwOspfv2AreaFilterExpAclName This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilte…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.5.25.155.4.1.26
hwOspfv2AreaFilterImpAclName This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that enter the area. It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilte…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.5.25.155.4.1.27
hwOspfv2AreaAuthKeychName This object indicates the keychain name. It's a string of 1 to 47 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.155.4.1.28

Information describes the configured parameters of the router's attached OSPF networks.

hwOspfv2NetworkEntry row .1.3.6.1.4.1.2011.5.25.155.5.1

Information describes the configured parameters of the router's attached OSPF networks.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2NetworkIpAddrIndex hwOspfv2NetworkIpMaskIndex

Column	Syntax	OID
hwOspfv2NetworkIpAddrIndex Network IP address: specifies the address of the network segment where the interface resides.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.5.1.1
hwOspfv2NetworkIpMaskIndex Network IP mask: specifies the wildcard mask of an IP address, which is similar to the reversed form of the mask of an IP address. '1' represents that the corresponding bit in the IP address is ignored and '0' represent…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.5.1.2
hwOspfv2NetworkRowStatus This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new network. If the network is created successfully, the value of this node changes t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.155.5.1.3

This object indicates the configured parameters of the OSPF neighbors attached to the router.

hwOspfv2NeighborEntry row .1.3.6.1.4.1.2011.5.25.155.6.1

This object indicates the configured parameters of the OSPF neighbors attached to the router.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2SelfIfnetIndex hwOspfv2NbrIpAddrIndex

Column	Syntax	OID
hwOspfv2SelfIfnetIndex This object indicates the unique value for each interface.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.5.25.155.6.1.1
hwOspfv2NbrIpAddrIndex This object indicates the IP address of the OSPF neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.2
hwOspfv2SelfRouterId This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the router ID of itself.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.3
hwOspfv2SelfIfIpAddress This object indicates the IP address of the OSPF interface associated with this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.4
hwOspfv2SelfIfName The name of the OSPF interface associated with this neighbor.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.2011.5.25.155.6.1.5
hwOspfv2NbrIfDesignatedRouter This object indicates the IP address of the designated router that is obtained from the DD packets from this neighbor. By default, the value is '00000000'H.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.6
hwOspfv2NbrIfBackupDesignatedRouter This object indicates the IP address of the backup designated router which is obtained from the DD packets from this neighbor. By default, the value is '00000000'H.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.7
hwOspfv2NbrIfMtu This object indicates the size of the largest IP datagram that can be sent out the sending interface without fragmentation. It is obtained from the DD packets from this neighbor. By default, the value is 0. The MTU of …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.155.6.1.8
hwOspfv2NbrRouterId This object indicates the router ID of this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.6.1.9
hwOspfv2NbrState This object indicates the state of the relationship with this neighbor. By default, the state is down.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.2011.5.25.155.6.1.10
hwOspfv2NbrMode This object indicates whether this neighbor is master or slave through the DD negotiation.	Enumeration Enumerated Values: 1 master 2 slave	.1.3.6.1.4.1.2011.5.25.155.6.1.11
hwOspfv2NbrPriority This object indicates the priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. By …	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.155.6.1.12
hwOspfv2NbrUpTime This object indicates the time (in seconds) since the state of this neighbor has been full.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.6.1.13
hwOspfv2NbrAuthSequence This object indicates the unsigned 32-bit non-decreasing sequence number. Used to guard against replay attacks. By default, the value is 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.6.1.14
hwOspfv2NbrDeadTimeLeft This object indicates the period (in seconds) after which this neighbor is declared dead.	Unsigned32 Constraints: range: 0-235926000	.1.3.6.1.4.1.2011.5.25.155.6.1.15
hwOspfv2NbrGrStatus This object indicates whether the neighbor performs GR or functions as a GR helper. By default, the state is normal.	Enumeration Enumerated Values: 1 normal 2 doingGR 3 helper 4 notsupport	.1.3.6.1.4.1.2011.5.25.155.6.1.16

The Interface Table describes the interfaces from the viewpoint of OSPF.

hwOspfv2InterfaceEntry row .1.3.6.1.4.1.2011.5.25.155.7.1

Information describes the configured parameters of the OSPF interfaces.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2InterfaceIndex

Column	Syntax	OID
hwOspfv2InterfaceIndex A unique value for each interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.155.7.1.1
hwOspfv2InterfaceName The name of the OSPF interface.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.2011.5.25.155.7.1.2
hwOspfv2IntfAuthModeType The type of the OSPF interface authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher mode. hmd5(4): indicates the hmac-md5 cipher mode. keych…	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5 4 hmd5 5 keychain 6 hmacSha256 7 null	.1.3.6.1.4.1.2011.5.25.155.7.1.3

Information describes the configured parameters of the router's attached OSPF area vlink.

hwOspfv2VLinkEntry row .1.3.6.1.4.1.2011.5.25.155.8.1

Information describes the configured parameters of the router's attached OSPF areas.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2NbrIdIndex

Column	Syntax	OID
hwOspfv2NbrIdIndex A 32-bit integer uniquely identifies an virtual link peer.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.155.8.1.1
hwOspfv2VLinkAuthModeType The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3): indicates the md5 cipher mode. hmd5(4): indicates the hmac-md5 cipher mode. keychain(5…	Enumerationr/w Enumerated Values: 1 none 2 simple 3 md5 4 hmd5 5 keychain 6 hmacSha256 7 null	.1.3.6.1.4.1.2011.5.25.155.8.1.2

Information describes the statistics of the router's attached OSPF processes.

hwOspfv2ProcessStatisticEntry row .1.3.6.1.4.1.2011.5.25.155.33.1.1

Information describes the statistics of the router's attached OSPF processes.

Indexes

hwOspfv2ProcessIdIndex

Column	Syntax	OID
hwospfv2ProcessPeerNumber The peer number of OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.155.33.1.1.1
hwospfv2ProcessFullPeerNumber The value of this object identifies the number of neighbors in full state in the OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.155.33.1.1.2
hwospfv2ProcessPeerUpCount The value of this object identifies the number of neighbors in Up state in the OSPF process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.1.1.3
hwospfv2ProcessPeerDownCount The value of this object identifies the number of neighbors in Down state in the OSPF process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.1.1.4
hwospfv2ProcessSendLsaNumber The lsa send number of OSPF process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.1.1.5
hwospfv2ProcessReceiveLsaNumber The lsa receive number of OSPF process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.1.1.6

Information describes the statistics of the router's attached OSPF interfaces.

hwOspfv2InterfaceStatisticEntry row .1.3.6.1.4.1.2011.5.25.155.33.2.1

Information describes the statistics of the router's attached OSPF interfaces.

Indexes

hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2InterfaceIndex

Column	Syntax	OID
hwospfv2InterfacePeerUpCount The value of this object identifies the number of neighbors in Up state on the OSPF interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.2.1.1
hwospfv2InterfacePeerDownCount The value of this object identifies the number of neighbors in Down state on the OSPF interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.155.33.2.1.2