HUAWEI-NDEC-MIB Table View

The table containing the list of all
SA entries configured on NDEC by the operator.

hipsNDECSAListEntry row .1.3.6.1.4.1.2011.2.33.2.1.1

Each entry contains the attributes
associated with a single NDEC'S SA entry.

Indexes

hipsPeerIpAddr hipsProtocol hipsSPI

Column	Syntax	OID
hipsPeerIpAddr The peer IP address of this SA entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.33.2.1.1.1
hipsProtocol The Protocol of this SA entry.	Enumeration Enumerated Values: 50 ipsecEsp 51 ipsecAh	.1.3.6.1.4.1.2011.2.33.2.1.1.2
hipsSPI The SPI of this SA entry.	Unsigned32 Constraints: range: 256-4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.3
hipsEncAlgorithm The encrypt algorithm of this SA entry.	Enumeration Enumerated Values: 1 ealgNone 2 ealgDescbc 3 ealg3desCbc 4 ealgXBlf 5 ealgXCast 6 ealgXSkipjack 7 ealgXAes 8 ealgXQc5 9 ealgXNsa	.1.3.6.1.4.1.2011.2.33.2.1.1.4
hipsAuthAlgorithm The authentication algorithm of this SA entry.	Enumeration Enumerated Values: 1 aalgNone 2 aalgMd5Hmac 3 aalgSha1Hmac 4 aalgMd5Hmac96 5 aalgSha1Hmac96 6 aalgXRipeMd160Hmac96 7 aalgXMd5 8 aalgXSha1	.1.3.6.1.4.1.2011.2.33.2.1.1.5
hipsLocalIpAddr The local IP address of this SA entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.33.2.1.1.6
hipsSaLifeKBytes The lifetime of this SA entry in bytes.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.7
hipsSaLifeSecond The lifetime of this SA entry in seconds.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.8
hipsByCard The flag of this SA on NDEC or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.2.33.2.1.1.9
hipsNegotiateSaMode The type of key used by the IPSec Phase-2 Tunnel.	Enumeration Enumerated Values: 1 none 2 isakmp 3 manual	.1.3.6.1.4.1.2011.2.33.2.1.1.10
hipsExpBytes This object specifies the lifetime in bytes of the tunnels generated using this policy specification.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.11
hipsSoftBytes This object specifies the lifetime in bytes of the tunnels generated using this policy specification.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.12
hipsExpTimeout This object specifies the lifetime in seconds of the tunnels generated using this policy specification.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.13
hipsSoftTimeout This object specifies the lifetime in seconds of the tunnels generated using this policy specification.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.1.1.14

The table containing IKE SA entities
configured on NDEC by the operator.

hikeSAEntry row .1.3.6.1.4.1.2011.2.33.2.2.1

Each entry contains the attributes
associated with a single IKE SA entity.

Indexes

hikeConnId

Column	Syntax	OID
hikeConnId The identifier of IKE SA connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.2.33.2.2.1.1
hikePeerIpAddr The peer IP address of this IKE SA.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.33.2.2.1.2
hikeFlag The status of this IKE SA.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.2.1.3
hikePhase The phase of this IKE SA.	Enumeration Enumerated Values: 1 unkown 2 phase1 3 phase2	.1.3.6.1.4.1.2011.2.33.2.2.1.4
hikeDoi The domain of this IKE SA	Enumeration Enumerated Values: 1 unkown 2 ipsec	.1.3.6.1.4.1.2011.2.33.2.2.1.5
hikeClearSA Clear this IKE SA or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.2.33.2.2.1.6

List of all ISAKMP policy entries.

hipsIKEPolicyEntry row .1.3.6.1.4.1.2011.2.33.2.3.1

Each entry includes the properties of a ISAKMP Policy entry.

Indexes

hipsIsakmpPolPriority

Column	Syntax	OID
hipsIsakmpPolPriority ISAKMP Policy entry's priority.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.2.33.2.3.1.1
hipsIsakmpPolEncr The specified encryption transform. It is used by Internet Key Exchange(IKE) tunnels to protect the ISAKMP PDUs.	Enumeration Enumerated Values: 1 ikeEncryptNone 2 ikeEncryptDesCbc 3 ikeEncryptIdeaCbc 4 ikeEncryptBlowfishcbc 5 ikeEncryptRc5R16B64cbc 6 ikeEncrypt3DesCbc 7 ikeEncryptCastCbc	.1.3.6.1.4.1.2011.2.33.2.3.1.2
hipsIsakmpPolHash The specified hash transform. It is used by Internet Key Exchange(IKE) tunnels to protect the ISAKMP PDUs.	Enumeration Enumerated Values: 1 ikeHashNone 2 ikeHashMd5 3 ikeHashSha 4 ikeHashTiger	.1.3.6.1.4.1.2011.2.33.2.3.1.3
hipsIsakmpPolAuth The specified peer authentication method. The local entity would authenticate the peer using the method specified by this object when this policy entity is selected to negotiate with a peer.	Enumeration Enumerated Values: 1 ikeAuthPreNone 2 ikeAuthPreShared 3 ikeAuthDss 4 ikeAuthRsaSig 5 ikeAuthRsaEnc 6 ikeAuthRsaEncRev	.1.3.6.1.4.1.2011.2.33.2.3.1.4
hipsIsakmpPolGroup This object is used to specify the Oakley group which is used for Diffie Hellman exchange in the Main Mode. The local entity selects the group specified by this object to perform Diffie Hellman exchange with the peer wh…	Enumeration Enumerated Values: 1 none 2 dhGroup1 3 dhGroup2	.1.3.6.1.4.1.2011.2.33.2.3.1.5
hipsIsakmpPolLifetime This object indicates the lifetime of the IKE tunnels in seconds.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.3.1.6

The table includes the list of the member cryptomaps
of the cryptomap sets which are set on the specific entity.

hipsStaticCryptomapEntry row .1.3.6.1.4.1.2011.2.33.2.4.1

Each entry contains properites of a single static cryptomap entry.
The members of dynamic cryptomap sets, which may be linked with the
parent static cryptomap set, are not included in this table.

Indexes

hipsStaticCryptomapName hipsStaticCryptomapSN

Column	Syntax	OID
hipsStaticCryptomapName The name of the cryptomap entry in the cryptomap set. This is the first index component of this table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.1
hipsStaticCryptomapSN The sequence number of the cryptomap entry in the cryptomap set. This is the second index component of this table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.2.33.2.4.1.2
hipsStaticCryptomapNegMode Type of the cryptomap entry. This object may be an ISAKMP cryptomap or manual.	Enumeration Enumerated Values: 1 none 2 isakmp 3 manual	.1.3.6.1.4.1.2011.2.33.2.4.1.3
hipsStaticCryptomapMatchAddr The access list number entered by the operatoir while creating this cryptomap.	Integer32 Constraints: range: 1-100000	.1.3.6.1.4.1.2011.2.33.2.4.1.4
hipsStaticCryptomapPeerIpAddr The IP address of the current peer. Traffic protected by this cryptomap is protected by a tunnel terminating at the device whose IP address is the value of this object.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.33.2.4.1.5
hipsStaticCryptomapTransforName The transform associated with this cryptomap entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.6
hipsStaticCryptomapLifetime This object indicates the lifetime of the IPSec SA which is created using this IPSec policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.7
hipsStaticCryptomapLifesize This object identifies the lifesize of the IPSec SAs generated using this IPSec policy entry. Lifesize means maximum traffic in bytes that may be carried.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.8
hipsStaticCryptomapLocalIpAddr The value of this object is the local IP address of the IPSec SAs generated using this IPSec policy entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.33.2.4.1.9
hipsIfNameUsed This object indicates the name of the interface which uses this IPSec policy entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.10
hipsInAHSPI This object indicates the inbound AH SPI IPSec SAs generated using this IPSec policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.11
hipsInESPSPI This object indicates the inbound ESP SPI IPSec SAs generated using this IPSec policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.12
hipsOutAHSPI This object indicates the outbound AH SPI IPSec SAs generated using this IPSec policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.13
hipsOutESPSPI This object indicates the outbound ESP SPI IPSec SAs generated using this IPSec policy entry.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.4.1.14
hipsInAhHexKeyString This object indicates the inbound AH authentication key IPSec SAs generated using this IPSec policy entry. The AH authentication key is in hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.15
hipsInEspCipherHexKeyString This object indicates the inbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The ESP authentication key is hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.16
hipsInEspAuthenHexKeyString This object indicates the inbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The ESP authentication key is hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.17
hipsInAhStringKeyString This object indicates the inbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The key is in string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.18
hipsInEspStringKeyString This object indicates the inbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The key is in string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.19
hipsOutAhHexKeyString This object indicates the outbound AH authentication key IPSec SAs generated using this IPSec policy entry. The key is in hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.20
hipsOutEspCipherHexKeyString This object indicates the outbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The key is in hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.21
hipsOutEspAuthenHexKeyString This object indicates the outbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The key is in hex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.22
hipsOutAhStringKeyString This object indicates the outbound AH authentication key IPSec SAs generated using this IPSec policy entry. The key is in string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.23
hipsOutEspStringKeyString This object indicates the outbound ESP authentication key IPSec SAs generated using this IPSec policy entry. The key is in string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.4.1.24

Transform set table.

hipsTransformNameSetEntry row .1.3.6.1.4.1.2011.2.33.2.5.1

Each entry refers to properties of a transform.

Indexes

hipsTransformName

Column	Syntax	OID
hipsTransformName Name of the transform entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.5.1.1
hipsTransformMode Mode of the transform entry.	Enumeration Enumerated Values: 1 tunnel 2 transport	.1.3.6.1.4.1.2011.2.33.2.5.1.2
hipsTransformProtocol Transform protocol.	Enumeration Enumerated Values: 1 ipsecNone 2 ipsecAhNew 3 ipsecAhEspNew 4 ipsecAhEspOld 5 ipsecAhOld 6 ipsecEspNew 7 ipsecEspAhNew 8 ipsecEspAhOld 9 ipsecEspOld	.1.3.6.1.4.1.2011.2.33.2.5.1.3
hipsAH Algorithm of AH protocol.	Enumeration Enumerated Values: 1 aalgNone 2 aalgMd5Hmac 3 aalgSha1Hmac 4 aalgMd5Hmac96 5 aalgSha1Hmac96 6 aalgXRipeMd160Hmac96 7 aalgXMd5 8 aalgXSha1	.1.3.6.1.4.1.2011.2.33.2.5.1.4
hipsEespEn Encryption algorithm of ESP protocol.	Enumeration Enumerated Values: 1 ealgNone 2 ealgDescbc 3 ealg3desCbc 4 ealgXBlf 5 ealgXCast 6 ealgXSkipjack 7 ealgXAes 8 ealgXQc5	.1.3.6.1.4.1.2011.2.33.2.5.1.5
hipsEspAu Authentication algorithm of ESP protocol.	Enumeration Enumerated Values: 1 aalgNone 2 aalgMd5Hmac 3 aalgSha1Hmac 4 aalgMd5Hmac96 5 aalgSha1Hmac96 6 aalgXRipeMd160Hmac96 7 aalgXMd5 8 aalgXSha1	.1.3.6.1.4.1.2011.2.33.2.5.1.6
hipsIsCardTransform This object indicates the flag of the NDEC is used for IPSec SAs generated using this IPSec policy entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.2.33.2.5.1.7

Table of NDEC set.

hipsNDECInfoEntry row .1.3.6.1.4.1.2011.2.33.2.6.1

Properties of each NDEC.

Indexes

hipsCardSlot

Column	Syntax	OID
hipsCardSlot Slot number of NDEC .	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2011.2.33.2.6.1.1
hipsInPac Total packets of the NDEC recieved.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.2
hipsOutPac Total packets of the NDEC sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.3
hipsInByte Total bytes of the NDEC sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.4
hipsOutByte Total bytes of the NDEC sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.5
hipsDropPac Total packets of the NDEC dropped .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.6
hipsCardStatus State of the NDEC.	Enumeration Enumerated Values: 1 ecStateInvalid 2 ecStateReady 3 ecStateResetting 4 ecStateProgramUpdating 5 ecStateDisable	.1.3.6.1.4.1.2011.2.33.2.6.1.7
hipsCardHardVer Hardware version of the NDEC.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.6.1.8
hipsCardSoftVer Software version of the NDEC.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.6.1.9
hipsCardCPLDVer CPLD version of the NDEC.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.2.33.2.6.1.10
hipsCardOperate The version of the NDEC's CPLD. cardClearStatic(1): clear the statistics of the card cardReset(2): rest the card cardSynTime(3): synchoronize the clock of the card cardSysLogOn(4):turn on the log of the card cardSysLogO…	Enumerationr/w Enumerated Values: 1 cardClearStatic 2 cardReset 3 cardSynTime 4 cardSysLogOn 5 cardSysLogOff 6 cardSysLogClear	.1.3.6.1.4.1.2011.2.33.2.6.1.11
hipsDropPacInUnitTime Dropped packets in unit interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.33.2.6.1.12