HUAWEI-MPLSOAM-PS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
25

hwMplsPsTable

table
.1.3.6.1.4.1.2011.5.12.7.1.3.1 · 1 row entry · 19 columns
Open in standard view 
This table specifies per-protection-group MPLS PS 
capability and associated information.
hwMplsPsEntry entry .1.3.6.1.4.1.2011.5.12.7.1.3.1.1
An entry in this table is created by an LSR for every
protection group capable of supporting mpls ps.
Indexes
hwMplsPsIndex
Column Syntax OID
hwMplsPsIndex
This is a unique index for an entry in the mplspsEntry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.1
hwMplsPsType
The type of protection switch,can be 1:1,1+1,shared mesh,
packet 1+1,the default choice is 1:1.
In the 1+1 architecture type, a protection LSP is dedicated to
each working LSP with the working LSP bridged onto the
pro…
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.2
hwMplsPsWorkTunnName
The name of work-tunnel.
OctetStringr/w .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3
hwMplsPsWorkTunnId
Work-tunnel id(session-tunnel-id).
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.4
hwMplsPsProtectTunnName
The name of protect-tunnel.
OctetString .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.5
hwMplsPsProtectTunnId
Protect-tunnel id(session-tunnel-id).
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.6
hwMplsPsRevertiveMode
Revertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the
working LSP is repaired.And switching does not occur in a
non-revertive mode.
1: revertive;
2: n…
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.7
hwMplsPsWTR
Wait to Restore timer is only applicable for the revertive mode
and applies to a working LSP,It prevents reversion back to
select the working LSP until the Wait to Restore timer has
expired.The default value is 12 mi…
Integer32
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.8
hwMplsPsHoldOff
The time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm.
step is 100ms.maximum is 10s.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.9
hwMplsPsSwitchCondition
The current switch condition of the protection group.
1: clear,This command clears all of the externally
initiated switch commands listed below;
2: lockout of protection,Fix the selector position on the
working …
Integer32r/w
Constraints:
range: 1-9
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.10
hwMplsPsWorkTunnelState
The state of working tunnel state in one protection group,
whether it is in detection,
1: it is outof defect
2: it enters defect
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.11
hwMplsPsProtTunnelState
The state of protection tunnel state in one protection group,
whether it is in detection,
1: it is outof defect
2: it enters defect
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.12
hwMplsPsSwitchResult
Which tunnel is used to transfer the data stream.
1: working-tunnel
2: protection-tunnel
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.13
hwMplsPsCfgType
The type of protection switch which is configured.
1: 1:1
2: 1+1
3: shared mesh
4: packet 1:1
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.14
hwMplsPsCfgProtectTunnId
Protect-tunnel id(session-tunnel-id).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.15
hwMplsPsCfgRevertiveMode
Revertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the
working LSP is repaired.And switching does not occur in a
non-revertive mode.
1: revertive;
2: n…
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.16
hwMplsPsCfgWTR
Wait to Restore timer is only applicable for the revertive mode
and applies to a working LSP,It prevents reversion back to
select the working LSP until the Wait to Restore timer has
expired.The default value is 12 mi…
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.17
hwMplsPsCfgHoldOff
The time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm.
step is 100ms.maximum is 10s.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.18
hwMplsPsRowStatus
This variable is used to create, modify, and
delete a row in this table.
1: active
2: not in service
3: not ready
4: create and go
5: create and wait
6: destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.7.1.3.1.1.19

hwMplsVCPsTable

table
.1.3.6.1.4.1.2011.5.12.7.1.3.3 · 1 row entry · 6 columns
Open in standard view 
Description.
hwMplsVCPsEntry entry .1.3.6.1.4.1.2011.5.12.7.1.3.3.1
this table for these commands
1.mpls te protection tunnel XXX
2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x }
3. mpls te reserved-for-binding
Indexes
hwMplsVCPsIfIndex
Column Syntax OID
hwMplsVCPsIfIndex
Description.the index of working tunnel interface of Protection group
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.1
hwMplsVCPsTNLBinding
Description.it is used by command ' mpls te reserved-for-binding '
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.2
hwMplsTeReverseLspName
Description.it is used for command ' mpls te reverse-lsp lspname'
OctetStringr/w .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.3
hwMplsVcPsRowStatus
Description.
1: active;
2: notInservice;
3: notReady;
4: CreateAndGo;
5: CreateAndWait;
6: destroy;
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.4
hwMplsTeReverseLspLsrId
Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.5
hwMplsTeReverseLspTunnId
Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.12.7.1.3.3.1.6