HUAWEI-MPLSLSR-EXT-MIB Table View

This table is used to configure or delete MPLS FEC Node.

hwMplsFecListEntry row .1.3.6.1.4.1.2011.5.25.182.1.50.1

An FEC node entry of FEC list table. It can be created, or deleted.
The indexes of this entry are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop.

Indexes

hwMplsFecNodeIpAddress hwMplsFecNodeInterface hwMplsFecNodeNextHop

Column	Syntax	OID
hwMplsFecNodeIpAddress This object indicates the IP address of the specified FEC node.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.50.1.2
hwMplsFecNodeInterface This object indicates the outgoing interface of the FEC node. You can get the correct interface index based on the ifIndex of ifTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.50.1.3
hwMplsFecNodeNextHop This object indicates the next hop of the FEC node.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.50.1.4
hwMplsFecListRowStatus This object indicates whether one entry of FEC list table is created or destroyed. The value of the object can be CreatAndGo or Destroy. If the value is set as CreatAndGo, and the entry is created in hwFecListTable, t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.182.1.50.1.51

This table is used to configure or delete the MPLS capability on the interface.

hwMplsInterfaceEntry row .1.3.6.1.4.1.2011.5.25.182.1.51.1

An entry of the MPLS interface table, used to display and configure features on the MPLS-supporting interface.
The index of this entry is hwMplsInterfaceIndex.

Indexes

hwMplsInterfaceIndex

Column	Syntax	OID
hwMplsInterfaceIndex This object indicates the interface index. You can get the correct interface index based on the ifIndex of ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.182.1.51.1.1
hwMplsMtu This object indicates the MPLS MTU of an interface. If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.182.1.51.1.11
hwMplsInterfaceRowStatus This object indicates whether one entry is created or deleted in hwMplsInterfaceTable. The value of the object can be CreatAndGo and Destroy. When the value is set as CreatAndGo, and the entry is created, the status o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.182.1.51.1.51

This table is used to configure or delete static LDP FRR entries on the interface.

hwLdpStaticFrrInterfaceEntry row .1.3.6.1.4.1.2011.5.25.182.1.52.1

This entry is used to display and configure the FRR-supporting interface.
The indexes of this entry are hwMplsInterfaceIndex and hwLdpStaticFrrPriority.

Indexes

hwMplsInterfaceIndex hwLdpStaticFrrPriority

Column	Syntax	OID
hwLdpStaticFrrPriority This object indicates the priority of a static FRR entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.182.1.52.1.1
hwLdpStaticFrrNextHop This object indicates the next hop of the static FRR.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.52.1.11
hwLdpStaticFrrIpPrefix This object indicates the IP prefix policy. The valid prefix length ranges from 1 to 169 characters. When the length is 0, it indicates that the policy is deleted. Range: 1-169	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.182.1.52.1.12
hwLdpStaticFrrInterfaceRowStatus This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable. The value of the object can be CreatAndGo or Destroy. When the value is set as CreatAndGo, and the entry is created, the s…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.182.1.52.1.51

This table specifies LDP virtual tunnel information.

hwLdpVirtualTunnelEntry row .1.3.6.1.4.1.2011.5.25.182.1.53.1

An entry of the virtual tunnel table, used to display the features associated with the virtual tunnel.
The index of this entry is hwLdpVirtualTunnelIndex.

Indexes

hwLdpVirtualTunnelIndex

Column	Syntax	OID
hwLdpVirtualTunnelIndex This object indicates the LDP virtual tunnel index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.53.1.1
hwLdpVirtualStatus The status of this LDP virtual tunnel. Options: 1. up(1) -indicates that the status of this LDP virtual tunnel is Up. 2. down(2) -indicates that the status of this LDP virtual tunnel is Down. 3. testing(3) -ind…	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.2011.5.25.182.1.53.1.2
hwLdpXcIndexArray This object indicates the xc index of the members of the LDP virtual tunnel.	OctetString	.1.3.6.1.4.1.2011.5.25.182.1.53.1.3
hwLdpOutSegmentIndexArray This object indicates the outsegment index of the members of the LDP virtual tunnel.	OctetString	.1.3.6.1.4.1.2011.5.25.182.1.53.1.4

This table is used to create or delete static LSP configurations.

hwMplsStaticLspEntry row .1.3.6.1.4.1.2011.5.25.182.1.55.1

The entry is used to show or configure static LSP.
The index of this entry is hwMplsStaticLspName.

Indexes

hwMplsStaticLspName

Column	Syntax	OID
hwMplsStaticLspName This object indicates the name of static LSP.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.182.1.55.1.1
hwMplsStaticLspType This object is used to identify the type of static LSP. Options: 1. ingress(1) -indicates that the type of the static LSP is ingress. 2. transit(2) -indicates that the type of the static LSP is t…	Enumerationr/w Enumerated Values: 1 ingress 2 transit 3 egress 4 ingressBindTunnel	.1.3.6.1.4.1.2011.5.25.182.1.55.1.11
hwMplsStaticLspInIntfIndex This object indicates the incoming-interface index.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.12
hwMplsStaticLspInLabel This object indicates the in-label.	MPLS-TC-STD-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.13
hwMplsStaticLspLsrId This object indicates the LSR ID of ingress static LSP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.55.1.14
hwMplsStaticLspTunnelID This object indicates the Tunnel ID of ingress static LSP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.15
hwMplsStaticLspNextHop This object indicates the nexthop of static LSP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.55.1.16
hwMplsStaticLspOutIntfIndex This object indicates the outgoing-interface index.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.17
hwMplsStaticLspOutLabel This object indicates the out-label.	MPLS-TC-STD-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.18
hwMplsStaticLspDestAddr This object indicates the destination.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.182.1.55.1.19
hwMplsStaticLspMaskLen This object indicates the mask length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.182.1.55.1.20
hwMplsStaticLspRowStatus This object indicates whether one entry is created or deleted in hwMplsStaticLspTable. The value of the object can be CreateAndGo or Destroy. When the value is set as CreateAndGo, and the entry is created, the status …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.182.1.55.1.51