HUAWEI-MPLS-TP-MIB

        This MIB is used for defining the HUAWEI private   
extended Transport Profile of Multiprotocol Label Switching (MPLS-TP) MIB
object. All MIB objects are used to describe private
managed objects and trap definitions for MPLS-TP.
    
Source file
HUAWEI-MPLS-TP-MIB
Last revised
Identity
hwMplsTpMib
Base OID
1.3.6.1.4.1.2011.5.25.305
Imported Objects
HUAWEI-MIB hwDatacomm
IF-MIB ifIndex ifName
MPLS-TC-STD-MIB MplsExtendedTunnelId MplsTunnelIndex MplsTunnelInstanceIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI BITS (no object page) Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-MPLS-TP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-MPLS-TP-MIB::hwMplsTpMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-TP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-TP-MIB::hwMplsTpMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (27)
.1.3.6.1.4.1.2011.5.25.305
.1.3.6.1.4.1.2011.5.25.305.1
.1.3.6.1.4.1.2011.5.25.305.1.1
.1.3.6.1.4.1.2011.5.25.305.1.1.1
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.1
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.2
Integer32
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.3
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.4
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.5
Integer32
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.6
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.7
Enumeration
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.8
Enumeration
.1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9
.1.3.6.1.4.1.2011.5.25.305.1.1.2
.1.3.6.1.4.1.2011.5.25.305.1.1.2.1
.1.3.6.1.4.1.2011.5.25.305.1.1.2.1.1
.1.3.6.1.4.1.2011.5.25.305.1.1.2.1.2
Enumeration
.1.3.6.1.4.1.2011.5.25.305.1.1.2.1.3
.1.3.6.1.4.1.2011.5.25.305.1.2
.1.3.6.1.4.1.2011.5.25.305.2
.1.3.6.1.4.1.2011.5.25.305.2.1
.1.3.6.1.4.1.2011.5.25.305.2.2
.1.3.6.1.4.1.2011.5.25.305.2.3
.1.3.6.1.4.1.2011.5.25.305.3
.1.3.6.1.4.1.2011.5.25.305.3.1
.1.3.6.1.4.1.2011.5.25.305.3.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.6.1.4.1.2011.5.25.305.3.1.1
Description.
Required groups
optional hwMplsTPGeneralGroup Indicate the atrributes of the TP tunnel.
Notifications / Traps (16)
NameOIDDescription
.1.3.6.1.4.1.2011.5.25.305.2.2.1
This notification is generated when a
mplsTpTunnelOperStatus object for one of the
configured tunnels is about to leave the down state
and transition into some other state (but not into
the notPresent state). This other state is
indicated by the included value of mplsTpTunnelOperStatus.
.1.3.6.1.4.1.2011.5.25.305.2.2.2
This notification is generated when a
mplsTpTunnelOperStatus object for one of the
configured tunnels is about to enter the down state
from some other state (but not from the notPresent
state). This other state is indicated by the
included value of mplsTpTunnelOperStatus.
.1.3.6.1.4.1.2011.5.25.305.2.2.3
This object is used to indicate that data switching from protection Lsp to Working Lsp.
.1.3.6.1.4.1.2011.5.25.305.2.2.4
This object is used to indicate that data switching from protection Lsp to Working Lsp.
.1.3.6.1.4.1.2011.5.25.305.2.3.1
This object indicates that the link recovers from a connectivity fault.
.1.3.6.1.4.1.2011.5.25.305.2.3.10
This object indicates the link receivs an unexpect MEG-ID defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.11
This object indicates that the link recovers from an Misconnection SEC defect .
.1.3.6.1.4.1.2011.5.25.305.2.3.12
This object indicates that the link receivs from an Misconnection SEC defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.2
This object is used to indicates the connectivity fault of the link.
.1.3.6.1.4.1.2011.5.25.305.2.3.3
This object indicates that the link recovers from a remote defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.4
This object is used to indicates the remote defect of the link.
.1.3.6.1.4.1.2011.5.25.305.2.3.5
This object indicates that the link recovers from an misconnection encap defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.6
This object indicates that the link receivs from an misconnection encap defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.7
This object indicates that the link recovers from an misconnection discription defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.8
This object indicates that the link receivs from an misconnection discription defect.
.1.3.6.1.4.1.2011.5.25.305.2.3.9
This object indicates that the link recovers from an unexpect MEG-ID defect.