HUAWEI-MIRROR-MIB Table View

The hwLocalObserveTable lists local mirror characters.

hwLocalObserveEntry row .1.3.6.1.4.1.2011.5.162.1.1.1.1

The hwLocalObserveEntry lists local mirror characters.

Indexes

hwLocalObservePort

Column	Syntax	OID
hwLocalObservePort Ifindex is the index of the observing port and is used to search the name of an observing port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.162.1.1.1.1.1
hwLocalObserveIndex Index of an observing port that identifies the observing port. Single chassis: (The index of a physical port corresponds to the slot number of a board. The observe index ranges from 1 to 32.One board s…	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.2011.5.162.1.1.1.1.2
hwLocalObserveWithLinkLayerHeader Same interworking attribute. 1: different interworking, mirroring packets at and above the IP layer. 0: same interworking, mirroring packets at and above Layer 2. Default value: 1.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.162.1.1.1.1.3
hwLocalObserveRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.1.1.1.4

The hwLocalPortMirrorTable lists local mirror characters.

hwLocalPortMirrorEntry row .1.3.6.1.4.1.2011.5.162.1.1.2.1

The hwLocalPortMirrorEntry lists local mirror characters.

Indexes

hwLocalMirrorPort

Column	Syntax	OID
hwLocalMirrorPort Ifindex of the mirroring port and is used to search the name of a mirroring port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.162.1.1.2.1.1
hwLocalMirrorBearing Mirroring direction: inbound, outbound, and in-out.1:inbound 2:outbound 3:in-out.	Enumerationr/w Enumerated Values: 1 inbound 2 outbound 3 inout	.1.3.6.1.4.1.2011.5.162.1.1.2.1.2
hwLocalCpuPacketFlag Indicates whether the packets sent to the CPU need to be mirrored. True: CPU packets are forwarded; False: CPU packets are not forwarded. You can configure this object only when the mirroring direction is 1 or 3. Def…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.162.1.1.2.1.3
hwLocalPortMirrorCar CAR (CIR) of mirrored packets, expressed in thousand bits per second. The default value is 0, which indicates that CAR is not performed.	KbpsInteger32r/w Constraints: range: 100-2500000 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.1.2.1.4
hwLocalPortMirrorRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.1.2.1.5

The hwLocalFlowMirrorTable lists local mirror characters.

hwLocalFlowMirrorEntry row .1.3.6.1.4.1.2011.5.162.1.1.3.1

The hwLocalFlowMirrorEntry lists local mirror characters.

Indexes

hwLocalBehaviorName

Column	Syntax	OID
hwLocalBehaviorName Traffic behavior view name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.1.3.1.1
hwLocalFlowMirrorEnable Indicates whether the flow mirroring is enabled. Disable indicates that flow mirroring is disabled; Enable indicates that flow mirroring is enabled. Default value: disable.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.162.1.1.3.1.2
hwLocalFlowMirrorCar CAR (CIR) of mirrored packets, expressed in thousand bits per second. The default value is 0, which indicates that CAR is not performed.	KbpsInteger32r/w Constraints: range: 100-2500000 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.1.3.1.3
hwLocalFlowMirrorRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.1.3.1.4

The hwLocalSlotMirrorTable lists local mirror characters.

hwLocalSlotMirrorEntry row .1.3.6.1.4.1.2011.5.162.1.1.4.1

The hwLocalFlowMirrorEntry lists local mirror characters.

Indexes

hwLocalSlotNo

Column	Syntax	OID
hwLocalSlotNo Slot number of a board.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.2011.5.162.1.1.4.1.1
hwSlotObserveIndex Indicates the index of the observing port.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.2011.5.162.1.1.4.1.2
hwLocalSlotMirrorRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.1.4.1.3

The hwPortMirrorInfoTable lists local and remote mirror characters.

hwPortMirrorInfoEntry row .1.3.6.1.4.1.2011.5.162.1.1.5.1

The hwPortMirrorInfoEntry lists local and remote mirror characters.

Indexes

hwMirrorPortIndex

Column	Syntax	OID
hwMirrorPortIndex Port index of the mirroring port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.162.1.1.5.1.1
hwMirrorType Mirroring type: local or remote1: local 2: remote.	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.2011.5.162.1.1.5.1.2
hwMirrorCar CAR (CIR) of mirrored packets, expressed in thousand bits per second	KbpsInteger32 Constraints: range: 100-2500000 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.1.5.1.3
hwMirrorClass Type: port/policy1: port 2: policy.	Enumeration Enumerated Values: 1 port 2 policy	.1.3.6.1.4.1.2011.5.162.1.1.5.1.4
hwMirrorBearing Mirroring direction: inbound(1), outbound(2), and in-out(3). When the direction is in-out, commands for both inbound and outbound configurations are required.	Enumeration Enumerated Values: 1 inbound 2 outbound 3 inout	.1.3.6.1.4.1.2011.5.162.1.1.5.1.5
hwMirrorCpuPacketFlag Indicates whether the packets sent to the CPU need to be mirrored. True: CPU packets are forwarded; False: CPU packets are not forwarded.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.162.1.1.5.1.6
hwMirrorWithLinkLayerHeader Same interworking attribute. 1: different interworking, mirroring packets at and above the IP layer. 0: same interworking, mirroring packets at and above Layer 2. Default value: 1.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.162.1.1.5.1.7
hwRemoteMirrorInstanceName mirror instance name. Max 31 characters.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.1.5.1.8

The hwRemoteObserveTable lists remote mirror characters.

hwRemoteObserveEntry row .1.3.6.1.4.1.2011.5.162.1.2.1.1

The hwLocalPortMirrorInfoEntry lists local mirror characters.

Indexes

hwRemoteObservePort

Column	Syntax	OID
hwRemoteObservePort Port ifindex of the observing port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.162.1.2.1.1.1
hwRemoteIdentifier Mirror Identifier.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.5.162.1.2.1.1.2
hwRemoteDescription Description of the observing port.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.2.1.1.3
hwRemoteObserveWithLinkLayerHeader Same interworking attribute. 1: different interworking, mirroring packets at and above the IP layer. 0: same interworking, mirroring packets at and above Layer 2. Default value: 1.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.162.1.2.1.1.4
hwRemoteObserveRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.2.1.1.5

The hwRemotePortMirrorTable lists remote mirror characters.

hwRemotePortMirrorEntry row .1.3.6.1.4.1.2011.5.162.1.2.2.1

The hwRemotePortMirrorTable lists local mirror characters.

Indexes

hwRemoteMirrorPort

Column	Syntax	OID
hwRemoteMirrorPort Port index of the mirroring port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.162.1.2.2.1.1
hwRemoteMirrorBearing Mirroring direction: inbound(1), outbound(2), and in-out(3). When the direction is in-out, commands for both inbound and outbound configurations are required.	Enumerationr/w Enumerated Values: 1 inbound 2 outbound 3 inout	.1.3.6.1.4.1.2011.5.162.1.2.2.1.2
hwRemoteCpuPacketFlag Indicates whether the packets sent to the CPU need to be mirrored. True: CPU packets are forwarded; False: CPU packets are not forwarded.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.162.1.2.2.1.3
hwPortMirrorInstanceName Name of the mirroring instance. It must already exist in the MIB table.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.2.2.1.4
hwRemotePortMirrorCar CAR (CIR) of mirrored packets, expressed in thousand bits per second by default, CAR is not performed for mirrored packets.	KbpsInteger32r/w Constraints: range: 100-2500000 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.2.2.1.5
hwRemotePortMirrorRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.2.2.1.6

The hwRemoteFlowMirrorTable lists remote mirror characters.

hwRemoteFlowMirrorEntry row .1.3.6.1.4.1.2011.5.162.1.2.3.1

The hwRemoteFlowMirrorEntry lists local mirror characters.

Indexes

hwRemoteBehaviorName

Column	Syntax	OID
hwRemoteBehaviorName Name of the traffic behavior.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.2.3.1.1
hwFlowMirrorInstanceName Name of the mirroring instance.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.2.3.1.2
hwRemoteFlowMirrorCar CAR (Committed Access Rate) setting of the mirror flow. The value indicates the CIR(Committed information rate) measured in kbps.	KbpsInteger32r/w Constraints: range: 100-2500000 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.2.3.1.3
hwRemoteFlowMirrorRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.2.3.1.4

The hwRemoteMirrorInstanceTable lists remote mirror characters.

hwRemoteMirrorInstanceEntry row .1.3.6.1.4.1.2011.5.162.1.2.4.1

The hwRemoteMirrorInstanceEntry lists mirror instance characters.

Indexes

hwMirrorInstanceName

Column	Syntax	OID
hwMirrorInstanceName Mirroring instance name. Max 31 characters	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.162.1.2.4.1.1
hwRemoteObservePortIp Remote mirror destination.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.162.1.2.4.1.2
hwRemoteMirrorIdentifier Mirror identifier.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.5.162.1.2.4.1.3
hwRemoteMirrorWithLinkLayerHeader Same interworking attribute. 1: different interworking, mirroring packets at and above the IP layer. 0: same interworking, mirroring packets at and above Layer 2. Default value: 1.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.162.1.2.4.1.4
hwMirrorFlowClass Type of mirrored flows. The value of 0 to 7 corresponds to <be,af1,af2,af3,af4,ef,cs6,cs7> respectively. be (0), af1 (1), af2 (2), af3 (3), af4 (4), ef (5), cs6 …	Enumerationr/w Enumerated Values: 0 be 1 af1 2 af2 3 af3 4 af4 5 ef 6 cs6 7 cs7	.1.3.6.1.4.1.2011.5.162.1.2.4.1.5
hwMirrorSliceSize Number of bytes of intercepted packets, expressed in bytes. The value of size ranges from 64 to 9600.	ByteInteger32r/w Constraints: range: 64-9600 range: 0-0	.1.3.6.1.4.1.2011.5.162.1.2.4.1.6
hwMirrorTunnelIndex Index of the tunnel that uniquely identifies the tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.162.1.2.4.1.7
hwMirrorTunnelType Type of the tunnel: 1: LSP tunnel 2: TE tunnel 3: GRE tunnel	Enumeration Enumerated Values: 1 lspTunnel 2 teTunnel 3 greTunnel	.1.3.6.1.4.1.2011.5.162.1.2.4.1.8
hwMirrorTunnelStatus status of tunnel 0:DOWN 1:UP	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.162.1.2.4.1.9
hwMirrorTunnelPolicy Tunnel policy name. Max 19 characters	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.162.1.2.4.1.10
hwMirrorInstanceRowStatus Row status. The value ranges from 1 to 6 but usually 4 and 6 are used. createAndGo[4] - create a row. destroy[6] -delete a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.162.1.2.4.1.11