HUAWEI-MFF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
22

hwMffVlanCfgTable

table
.1.3.6.1.4.1.2011.5.25.170.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMffVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFF-MIB::hwMffVlanCfgTable' 
The mff vlan configuration table.
hwMffVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.170.1.2.1
An entry in the mff vlan configuration table.
Indexes
Column Syntax OID
hwMffVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.170.1.2.1.1
hwMffStaticGatewayIpAddr
Whether to enable static mff on this vlan and configure gateway IP address .
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.2.1.2
hwMffGatewayDetect
Whether to enable gateway MAC address detection on this vlan.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.170.1.2.1.3
hwMffGatewayDetectInterval
Whether to modify the gateway MAC address detection interval on this vlan.
Integer32r/w
Constraints:
range: 30-17280
 .1.3.6.1.4.1.2011.5.25.170.1.2.1.4
hwMffVlanCfgRowStatus
The row status of the mff vlan configuration table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.170.1.2.1.100

hwMffNetworkPortTable

table
.1.3.6.1.4.1.2011.5.25.170.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMffNetworkPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFF-MIB::hwMffNetworkPortTable' 
The mff port configuration table.
hwMffNetworkPortEntry row .1.3.6.1.4.1.2011.5.25.170.1.3.1
An entry in the mff port configuration table.
Indexes
Column Syntax OID
hwMffPortIndex
The port index.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.170.1.3.1.1
hwMffNetworkPortRowStatus
The row status of the mff port configuration table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.170.1.3.1.100

hwMffServerCfgTable

table
.1.3.6.1.4.1.2011.5.25.170.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMffServerCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFF-MIB::hwMffServerCfgTable' 
The mff server IP configuration table.
hwMffServerCfgEntry row .1.3.6.1.4.1.2011.5.25.170.1.4.1
An entry in the mff server IP configuration table.
Indexes
Column Syntax OID
hwMffServerVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.170.1.4.1.1
hwMffIpIndex
Index: IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.4.1.2
hwMffServerIpRowStatus
The row status of the mff server IP configuration table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.170.1.4.1.100

hwMffUserGatewayTable

table
.1.3.6.1.4.1.2011.5.25.170.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMffUserGatewayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFF-MIB::hwMffUserGatewayTable' 
The mff users and gateways table.
hwMffUserGatewayEntry row .1.3.6.1.4.1.2011.5.25.170.1.5.1
An entry in the mff users and gateways table.
Indexes
Column Syntax OID
hwMffUserGatewayVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.170.1.5.1.1
hwMffUserIpIndex
Index: user's IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.5.1.2
hwMffGatewayIpIndex
Index: gateway's IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.5.1.3
hwMffUserMacAddr
User's MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.170.1.5.1.20
hwMffGatewayMacAddr
Gateway's MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.170.1.5.1.21

hwMffModUserTable

table
.1.3.6.1.4.1.2011.5.25.170.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMffModUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFF-MIB::hwMffModUserTable' 
Modify the mff users and gateways table.
hwMffModUserEntry row .1.3.6.1.4.1.2011.5.25.170.1.6.1
An entry to modify the mff users and gateways table.
Indexes
Column Syntax OID
hwMffModUserVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.1
hwMffModUserIpAddrIndex
Index: user's IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.2
hwMffModUserMacAddr
User's MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.3
hwMffModUserPort
The user's port index.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.4
hwMffModUserGatewayIp
Index: gateway's IP.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.5
hwMffModUserGatewayMacAddr
Gateway's MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.6
hwMffModUserRowStatus
The row status of modify the mff users and gateways table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.170.1.6.1.100