HUAWEI-LACP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
20

hwAggLinkTable

table
.1.3.6.1.4.1.2011.5.102.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAggLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LACP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LACP-MIB::hwAggLinkTable' 
Describes the configuration of static LAGs.
The index of this table is hwAggLinkNumber.
hwAggLinkEntry row .1.3.6.1.4.1.2011.5.102.1.1.1
Describes the configuration of static LAGs.
The index of this entry is hwAggLinkNumber.
Indexes
Column Syntax OID
hwAggLinkNumber
Indicates the index of each LAG. The index uniquely identifies a LAG and equals
the ifindex value of the master port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.102.1.1.1.1
hwAggLinkName
The name of an aggregation group
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.102.1.1.1.2
hwAggLinkMode
Type of aggregation. 1 => Manual
aggregation, no LACP 2 => Membership
specified by user, LACP is used to
validate 3 => Completely dynamic
aggregation detected by LACP
Options:
1. manual(1) -indicates the type of ag…
Enumerationr/w
Enumerated Values:
1manual
2static
3dynamic
 .1.3.6.1.4.1.2011.5.102.1.1.1.3
hwAggLinkPortList
List of ports in this AL, by bridge port number.
If the type is manual or static, you can update
this list to your hearts content. If, however,
the AL is dynamic, then the system will maintain it.
You are NOT permitt…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.102.1.1.1.4
hwAggLinkState
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.102.1.1.1.5
hwAggPortListSelectedPorts
A PortList of physical ports that have selected
to this aggregator, but which have not yet attached.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.102.1.1.1.6
hwAggPortListSamePartnerPorts
PortList of physical ports that the same Actor
SystemID and partner systemID as this aggregator,
but have differing actor and partner keys.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.102.1.1.1.7
hwAggLinkShareType
Indicates the load sharing type of links.
Options:
1. loadSharing(1) -indicates sharing the link load
2. nonLoadSharing(2) -indicates not sharing the link load
Enumeration
Enumerated Values:
1loadSharing
2nonLoadSharing
 .1.3.6.1.4.1.2011.5.102.1.1.1.8
hwAggLinkProtectType
Indicates the protection type of links.
Options:
1. backupProtect(1) -indicates the backup aggregation protection
2. nonBackupProtect(2) -indicates the non-backup aggregation protection
Enumeration
Enumerated Values:
1backupProtect
2nonBackupProtect
 .1.3.6.1.4.1.2011.5.102.1.1.1.9
hwAggLinkSelectPorts
Indicates the number of selected ports in the LAG.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.102.1.1.1.10
hwAggLinkUnselectPorts
Indicates the number of non-selected ports in the LAG. The non-selected ports include unselected ports and standby ports.
Integer32
Constraints:
range: 0-65535
range: 0-15
 .1.3.6.1.4.1.2011.5.102.1.1.1.11
hwAggLinkMasterPort
Indicates the ifindex of the master port in the LAG.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.102.1.1.1.12
hwAggLinkPreemptDelayTime
Indicates the value of preempt delay time. The unit is second.
Default:0
Integer32r/w
Constraints:
range: 0-180
 .1.3.6.1.4.1.2011.5.102.1.1.1.13

hwAggPortTable

table
.1.3.6.1.4.1.2011.5.102.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAggPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LACP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LACP-MIB::hwAggPortTable' 
Describes the configuration of the ports in static LAGs.
The index of this table is hwAggPortIndex.
hwAggPortEntry row .1.3.6.1.4.1.2011.5.102.1.2.1
Describes the configuration of the ports in static LAGs.
The index of this entry is hwAggPortIndex.
Indexes
Column Syntax OID
hwAggPortIndex
Indicates the index of the port in a LAG. The index uniquely identifies a port
in a LAG and equals the ifIndex value of the port.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.102.1.2.1.1
hwAggPortNotAttachedReason
Indicates why this port is selected for an aggregator
but not attached,-- 1 - all active ports are already
in-use for this aggregator.-- 2 - all aggregation
resources are already being used.-- 3 - the port's
configura…
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.2011.5.102.1.2.1.2
hwAggPortLacpState
Control lacp enable or disable
SNMPv2-TCTruthValuer/w
Constraints:
range: 0-15
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.102.1.2.1.3
hwAggPortNotAttachedString
Indicates why this
port is selected for an aggregator
but not attached
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.102.1.2.1.4
hwAggPortRole
Indicates the port role.
Options:
1. selected(1) -indicates the port is selected
2. unselected(2) -indicates the port is not selected
3. standby(3) -indicates the port is standby
Enumeration
Enumerated Values:
1selected
2unselected
3standby
 .1.3.6.1.4.1.2011.5.102.1.2.1.5
hwAggPortType
Indicates the port type.
Options:
1. mastPort(1) -indicates the port is a primary port
2. nonMastPort(2) -indicates the port is a secondary port
Enumeration
Enumerated Values:
1mastPort
2nonMastPort
 .1.3.6.1.4.1.2011.5.102.1.2.1.6
hwAggPortStatus
Indicates the port status.
Options:
1. forwarding(1) -indicates packets on the port can be forwarded
2. block(2) -indicates the port is blocked
Enumeration
Enumerated Values:
1forwarding
2block
 .1.3.6.1.4.1.2011.5.102.1.2.1.7