HUAWEI-LACP-MIB
This mib module defines the Link Aggregation Control Protocol (LACP) MIB objects.
LACP is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard.
By using this protocol, the ports between devices are automatically aggregated, port
failure detection at layer 2 is performed, line aggregation protocol control is performed,
and protection switchover function is triggered.
- Source file
HUAWEI-LACP-MIB- Last revised
- Identity
hwLacpExt- Base OID
1.3.6.1.4.1.2011.5.102
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiMgmt |
| IEEE8023-LAG-MIB | dot3adAggPortPartnerOperKey dot3adAggPortPartnerOperPort dot3adAggPortPartnerOperSystemID LacpKey |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the huawei MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-LACP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-LACP-MIB::hwLacpExt'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LACP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LACP-MIB::hwLacpExt'
Objects (47)
Showing 47 of 47 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2011.5.102 |
||
.1.3.6.1.4.1.2011.5.102.1 |
||
.1.3.6.1.4.1.2011.5.102.1.1 |
||
.1.3.6.1.4.1.2011.5.102.1.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.2011.5.102.1.1.1.1 |
|
.1.3.6.1.4.1.2011.5.102.1.1.1.10 |
||
|
Integer32
|
.1.3.6.1.4.1.2011.5.102.1.1.1.11 |
|
.1.3.6.1.4.1.2011.5.102.1.1.1.12 |
||
|
Integer32
|
.1.3.6.1.4.1.2011.5.102.1.1.1.13 |
|
|
|
OctetString
|
.1.3.6.1.4.1.2011.5.102.1.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.1.1.3 |
.1.3.6.1.4.1.2011.5.102.1.1.1.4 |
||
|
|
.1.3.6.1.4.1.2011.5.102.1.1.1.5 |
|
.1.3.6.1.4.1.2011.5.102.1.1.1.6 |
||
.1.3.6.1.4.1.2011.5.102.1.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.1.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.1.1.9 |
|
.1.3.6.1.4.1.2011.5.102.1.2 |
||
.1.3.6.1.4.1.2011.5.102.1.2.1 |
||
.1.3.6.1.4.1.2011.5.102.1.2.1.1 |
||
.1.3.6.1.4.1.2011.5.102.1.2.1.2 |
||
.1.3.6.1.4.1.2011.5.102.1.2.1.3 |
||
.1.3.6.1.4.1.2011.5.102.1.2.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.2.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.2.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.2.1.7 |
|
.1.3.6.1.4.1.2011.5.102.1.3 |
||
|
|
Integer32
|
.1.3.6.1.4.1.2011.5.102.1.4 |
|
|
.1.3.6.1.4.1.2011.5.102.1.5 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.6 |
|
Enumeration
|
.1.3.6.1.4.1.2011.5.102.1.7 |
|
.1.3.6.1.4.1.2011.5.102.2 |
||
.1.3.6.1.4.1.2011.5.102.4 |
||
.1.3.6.1.4.1.2011.5.102.4.1 |
||
.1.3.6.1.4.1.2011.5.102.4.2 |
||
.1.3.6.1.4.1.2011.5.102.5 |
||
.1.3.6.1.4.1.2011.5.102.5.1 |
||
.1.3.6.1.4.1.2011.5.102.5.2 |
||
.1.3.6.1.4.1.2011.5.102.5.3 |
||
.1.3.6.1.4.1.2011.5.102.5.4 |
||
.1.3.6.1.4.1.2011.5.102.5.5 |
||
.1.3.6.1.4.1.2011.5.102.5.6 |
||
.1.3.6.1.4.1.2011.5.102.6 |
||
.1.3.6.1.4.1.2011.5.102.6.1 |
||
.1.3.6.1.4.1.2011.5.102.6.1.0 |
||
.1.3.6.1.4.1.2011.5.102.6.2 |
||
.1.3.6.1.4.1.2011.5.102.6.2.0 |
Dependencies (26) 6 direct · 20 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-ENTITY-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- HCNUM-TCrfc
- HUAWEI-MIBhuawei
- HUAWEI-TC-MIBhuawei
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- HUAWEI-DEVICE-MIBhuawei
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8023-LAG-MIBrfc
- HUAWEI-LACP-MIBhuaweiselected
Conformance Groups (2)
|
hwAggLinkName hwAggLinkMode hwAggLinkPortList hwAggLinkState hwAggPortListSelectedPorts hwAggPortListSamePartnerPorts hwAggLinkShareType hwAggLinkProtectType hwAggLinkSelectPorts hwAggLinkUnselectPorts hwAggLinkMasterPort hwAggPortNotAttachedReason hwAggPortLacpState hwAggPortNotAttachedString hwAggPortRole hwAggPortType hwAggPortStatus hwAggResourceAllocationValue hwAggShortPeriod hwAggLongPeriod
The collection of objects which are used to represent Lacp objects.
|
.1.3.6.1.4.1.2011.5.102.4.2.1
|
|
|
The collection of objects which are used to represent notifications.
|
.1.3.6.1.4.1.2011.5.102.4.2.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.2011.5.102.4.1.1The compliance statement for SNMP entities which implement
the Lacp MIB.
the Lacp MIB.
Required groups
| mandatory | hwLacpMibObjectGroup | |
| mandatory | hwLacpMibNotificationGroup |
Notifications / Traps (10)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.2011.5.102.2.1 |
This event will be triggered whenever an aggregation changes its speed.
|
|
.1.3.6.1.4.1.2011.5.102.2.4 |
This event will be triggered whenever any port in aggregator is made inactive
|
|
.1.3.6.1.4.1.2011.5.102.6.1.0.1 |
The SNMP trap that is generated when LACP link is faulty.
|
|
.1.3.6.1.4.1.2011.5.102.6.1.0.2 |
The SNMP trap that is generated when the port receives the LACP packet normally.
|
|
.1.3.6.1.4.1.2011.5.102.6.1.0.3 |
The SNMP trap that is generated when LACP up link switch over.
|
|
.1.3.6.1.4.1.2011.5.102.6.1.0.4 |
The SNMP trap that is generated when a port turns into
forwarding state from other state. |
|
.1.3.6.1.4.1.2011.5.102.6.1.0.5 |
The SNMP trap that is generated when a port turns into
discarding state from forwarding state. |
|
|
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex HUAWEI-DEVICE-MIBhwPortIndex IEEE8023-LAG-MIBdot3adAggPortPartnerOperSystemID IEEE8023-LAG-MIBdot3adAggPortPartnerOperPort IEEE8023-LAG-MIBdot3adAggPortPartnerOperKey hwLacpFiberConnectErrorOperSystemID hwLacpFiberConnectErrorOperPort hwLacpFiberConnectErrorOperKey
|
.1.3.6.1.4.1.2011.5.102.6.1.0.6 |
The SNMP trap that is generated when a fiber connect error occurs.
|
.1.3.6.1.4.1.2011.5.102.6.2.0.1 |
The SNMP trap that is generated when a port turns into
forwarding state from other state. |
|
.1.3.6.1.4.1.2011.5.102.6.2.0.2 |
The SNMP trap that is generated when a port turns into
discarding state from forwarding state. |