HUAWEI-L3VLAN-MIB Table View

This table contains the information of vlans 
encapsulated by the sub-interfaces.

hwSubIfVlanEntry row .1.3.6.1.4.1.2011.5.25.100.1.1.1

Provides the information of a sub-interface vlan entry.

Indexes

hwSubIfIndex hwSubIfVlanId

Column	Syntax	OID
hwSubIfIndex Interface index(es) of port(s) present on the device.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.100.1.1.1.1
hwSubIfVlanId This object specifies the vlan id encapsulated by the sub-interface.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2011.5.25.100.1.1.1.2
hwSubIfVlanType This object specifies the vlan type encapsulated by the sub-interface.	Enumerationr/w Enumerated Values: 2 dot1q	.1.3.6.1.4.1.2011.5.25.100.1.1.1.3
hwSubIfVlanStatus This object specifies the status of the sub-interface vlan table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.100.1.1.1.4

Per vid router statistics table includes the
number of packets that each vlan is received and sent.

hwVLANMibRoutertVlanCountEntry row .1.3.6.1.4.1.2011.5.25.100.1.2.1

Entry of vLANMibRoutertVlanCountTable

Indexes

hwVLANMibRouterPort hwVLANMibRouterVID

Column	Syntax	OID
hwVLANMibRouterPort Interface index(es) of trunk port(s) present on the device.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.100.1.2.1.1
hwVLANMibRouterVID The vlan id.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.100.1.2.1.2
hwVLANMibRouterVlanPacketTran The number of packets transmitted to vlan	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.100.1.2.1.3
hwVLANMibRouterVlanPacketSent Number of packets sent by vlan	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.100.1.2.1.4
hwVLANMibClearVidStatistics Setting the object to clear(1) will clear the counters of a row of the hwVLANMibRoutertVlanCountTable. When a clear action had been finished, or there is no clear action , the value of the object would be unavailable(0…	Enumerationr/w Enumerated Values: 0 unavailable 1 clear	.1.3.6.1.4.1.2011.5.25.100.1.2.1.5

This table contains the information of vlan and 8021P/DSCP/EtherType policy
encapsulated by the sub-interfaces.

hwSubIfVlanPolicyEntry row .1.3.6.1.4.1.2011.5.25.100.1.3.1

Provides the information of a sub-interface vlan policy entry.

Indexes

hwSubIfVlanPolicyIfIndex hwSubIfVlanPolicyVlanId

Column	Syntax	OID
hwSubIfVlanPolicyIfIndex Interface index(es) of port(s) present on the device.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.100.1.3.1.1
hwSubIfVlanPolicyVlanId This object specifies the vlan id encapsulated by the sub-interface. when the vlan id is zero it means to configure the interface as the untagged sub-interface, When configure vlan as a range, hwSubIfVlanPolicyVlanId i…	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.100.1.3.1.2
hwSubIfVlanPolicyIfType Indicates the sub-interface type as follows: dot1q(1): indicates vlan-type dot1q sub-interface. dot1qTerm(2): indicates dot1q termination sub-interface. stacking(3): indicates qinq stacking sub-interface. unta…	Enumerationr/w Enumerated Values: 1 dot1q 2 dot1qTerm 3 stacking 4 untagged	.1.3.6.1.4.1.2011.5.25.100.1.3.1.3
hwSubIfVlanPolicyVlanIdEnd When configure vlan as a range, hwSubIfVlanPolicyVlanId is the start vlan id and hwSubIfVlanPolicyVlanIdEnd is the end vlan id.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.100.1.3.1.4
hwSubIfVlanPolicyType Indicates the type of vlan policy as follows: 8021p(1): indicates IEEE 802.1P encapsulation. dscp(2): indicates Differentiated Services CodePoint. eth-type(3): indicates EtherType,For example PPPOE. default…	Enumerationr/w Enumerated Values: 1 type8021P 2 typeDSCP 3 typeEtherType 4 default	.1.3.6.1.4.1.2011.5.25.100.1.3.1.5
hwSubIfVlanPolicyValue Indicates the information of vlan policy as follows: Each octet within this value specifies a set of eight priorities. When the policy type is 8021p, the first octet specifying 8021p priority 0 through 7; When the polic…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.100.1.3.1.6
hwSubIfVlanPolicyGroupId Group-management id.	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.100.1.3.1.7
hwSubIfVlanPolicyRowStatus This object specifies the status of the sub-interface vlan table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.100.1.3.1.51

This table contains the information of vlans 
encapsulated by the main interfaces.

hwMainIfVlanEntry row .1.3.6.1.4.1.2011.5.25.100.1.4.1

Provides the information of a main interface vlan entry.

Indexes

hwMainIfIndex

Column	Syntax	OID
hwMainIfIndex Interface index(es) of port(s) present on the device.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.100.1.4.1.1
hwMainIfVlanId This object specifies the vlan id encapsulated by the main interface.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2011.5.25.100.1.4.1.2