HUAWEI-L2MULTICAST-MIB Table View

This table describes the configurations of IGMP snooping in a VLAN or a VSI.

hwL2mcCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.2.1.1

An entry is created for each active VLAN or VSI in the device
and deleted when the VLAN or VSI becomes inactive.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.1
hwL2mcVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.2
hwL2mcEnabled Whether IGMP snooping is enabled in a VLAN or a VSI: 1:enabled 2:disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.3
hwL2mcRouterAgingTime The aging time of an interface on a router. The value ranges from 1 to 1000, in seconds. The default value is 180, which router port is created by Igmp Query message. And when it is created by PIM hello messge, the defa…	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.4
hwL2mcMaxQueryRespTime The maximum response time. The value ranges from 1 to 25, in seconds. The default value is 10, in seconds.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.5
hwL2mcLastMemQueryInterval The last member query interval. The value ranges from 1 to 5, in seconds. The default value is 1, in seconds.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.6
hwL2mcQueryInterval The query interval. The value ranges from 1 to 65535, in seconds. The default value is 60, in seconds.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.7
hwL2mcRobustCount The robustness variable. The value ranges from 2 to 5. The default value is 2.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.8
hwL2mcCheckRouterAlert Whether to check the router-alert of a packet. The default value is false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.9
hwL2mcSendRouterAlert Whether to send the router-alert of a packet. The default value is true.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.10
hwL2mcIgmpVersion The version of the IGMP packets. The value ranges from 1 to 3. The default value is 2.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.11
hwL2mcFwdMode The forwarding mode: 1: IP 2: MAC The default value is 1.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.12
hwL2mcPromptLeaveEnable Whether the prompt leave is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.13
hwL2mcPromptLeaveAclNum Whether the prompt leave complies with the ACL rules. The ACL number can be set. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that no ACL number is set.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.14
hwL2mcRouterPortLearningEnable Whether interface learning is enabled or not in a VLAN: 1: enabled 2: disabled The default value is 1.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.15
hwL2mcReportSuppressEnable Whether the suppression of the IGMP Report message (proxy) is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.16
hwL2mcIgmpQuerierEnable Whether the querier is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.17
hwL2mcIgmpSsmMappingEnable Whether Ssm-Mapping is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.18
hwL2mcSsmAclNum That SSM complies with the ACL number. The ACL number ranges from 2000 to 2999. The default value is 0, indicating that no ACL number is set.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.19
hwL2mcProxyRouterProtocolPass Whether protocol packets are allowed to pass a router port when proxy is enabled. The default value is false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.20
hwL2mcAsmSsmFlag That restric study: 1: asm-ssm 2: asm-only 3: ssm-only The default value is 1.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.21
hwL2mcSrcLifeTime That source aging time: range from 60 to 1000 The default value is 210.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.22
hwL2mcPerformanceStatistics That performance statistic is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.23
hwL2mcQuerierElection That querier election is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Constraints: range: 0-31 Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.24
hwETrackEnable The host explicity track is enabled: 1: enabled 2: disabled The default value is 2.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.25
hwL2mcBackupQueryFwd That IGMP query forward : 1: Do not forward; 2: Forward without replace source MAC address; 3: Forward with replace source MAC address; The default value is 1.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.26
hwL2mcBackupReportFwd That IGMP report forward : 1: Do not forward; 2: Forward without replace source MAC address; 3: Forward with replace source MAC address; The default value is 1.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.27
hwL2mcQuerySuppress Whether supress IGMP query packet or time of suppress interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.28
hwL2mcRtLearnRingLinkage Whether responed to link state for SEP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.29
hwL2mcIgmpIpPolicyAclNum Whether the IGMP ip policy complies with the ACL rules. The ACL number can be set. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that no ACL number is set.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.30
hwL2mcIgmpSsmMappingPolicy The policy name of SSM mapping.	OctetStringr/w	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.31
hwL2mcRowStatus The row status.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4294967295 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.2.1.1.100

Table contains VLAN or VSI statistics information
for IGMP Snooping.

hwL2mcStatisticsEntry row .1.3.6.1.4.1.2011.5.25.181.1.3.1.1

An entry is created for each active VLAN or VSI in the device
and deleted when the VLAN or VSI becomes inactive.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcStatsVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Enumerated Values: 1 nonMapping 2 mapping Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.1
hwL2mcStatsVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Enumerated Values: 1 host 2 router	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.2
hwL2mcRecvIgmpV1ReportNum The number of IGMPv1 Report messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Enumerated Values: 1 port 2 static 3 both Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.3
hwL2mcRecvIgmpV2ReportNum The number of IGMPv2 Report messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.4
hwL2mcRecvIgmpV3ReportNum The number of IGMPv3 Report messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.5
hwL2mcRecvIgmpLeaveNum The number of IGMP Leave messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.6
hwL2mcRecvIgmpV1QueryNum The number of IGMPv1 Query messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.7
hwL2mcRecvIgmpV2QueryNum The number of IGMPv2 Query messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.8
hwL2mcRecvIgmpV3QueryNum The number of IGMPv3 Query messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.9
hwL2mcRecvPimHelloNum The number of PIM Hello messages received in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.10
hwL2mcSendQueryNum The number of IGMP Query messages (the source address is 0) in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.11
hwL2mcSendQuerySourceNum The number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.12
hwL2mcProxyGenQueryNum The number of Query messages sent by the proxy in a VLAN or a VSI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.13
hwL2mcProxyGroupQueryNum The number of Query messages sent by the proxy in a VLAN or a VSI to a specified group.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.14
hwL2mcProxyGroupSourceQueryNum The number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group.	SNMPv2-SMICounter32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.15
hwL2mcIgmpPacketClearStats Whether to clear the statistics of IGMP snooping. If the value is 1, it indicates that the statistics need to be cleared.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 ip 2 mac Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.181.1.3.1.1.30

Table contains l2 multicast forward information
for IGMP Snooping.

hwL2mcFwdEntry row .1.3.6.1.4.1.2011.5.25.181.1.4.1.1

An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
a forwarding table entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcFwdVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Enumerated Values: 1 host 2 router Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.1
hwL2mcFwdVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Enumerated Values: 1 port 2 static 3 both	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.2
hwL2mcFwdGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.3
hwL2mcFwdSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.4
hwL2mcFwdPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.5
hwL2mcFwdPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Constraints: range: 0-31 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.6
hwL2mcFwdPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.7
hwL2mcFwdPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.8
hwL2mcFwdPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.9
hwL2mcFwdVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.10
hwL2mcFwdAddressType The address type of an entry: 1: IP 2: MAC The default value is 1.	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.11
hwL2mcFwdHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.18
hwL2mcFwdHostFlag2 Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.19
hwL2mcFwdHostFlag3 The type of an interface created on a router: 1: Interface connected to the host 2: Router interface that replicates multicast data flows	Enumeration Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.20
hwL2mcFwdHostFlag4 Indicates (S, G) table created : 1: from port; 2: from static; 3: from both the default value is 1	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.1.1.21

Table contains l2 multicast forward information
for IGMP Snooping.

hwMldFwdEntry row .1.3.6.1.4.1.2011.5.25.181.1.4.2.1

An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
a forwarding table entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwMldFwdVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.1
hwMldFwdVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Enumerated Values: 1 include 2 exclude 3 invalid	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.2
hwMldFwdGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	IPV6-TCIpv6Address Enumerated Values: 1 static 2 dynamic 3 staticDynamic 4 invalid Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.3
hwMldFwdSourceAddress The source IP address of a multicast group.	IPV6-TCIpv6Address Enumerated Values: 1 nonMapping 2 mapping Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.4
hwMldFwdPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.5
hwMldFwdPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.6
hwMldFwdPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.7
hwMldFwdPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.8
hwMldFwdPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.9
hwMldFwdVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.10
hwMldFwdAddressType The address type of an entry: 1: IP 2: MAC The default value is 1.	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.11
hwMldFwdHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.12
hwMldFwdHostFlag2 Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping	Enumeration Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.13
hwMldFwdHostFlag3 The type of an interface created on a router: 1: Interface connected to the host 2: Router interface that replicates multicast data flows	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.14
hwMldFwdHostFlag4 Indicates (S, G) table created : 1: from port; 2: from static; 3: from both the default value is 1	Enumeration Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.4.2.1.15

Table contains l2 multicast group information
for IGMP Snooping.

hwL2mcGroupInfoEntry row .1.3.6.1.4.1.2011.5.25.181.1.5.1.1

An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
a forwarding table entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcGroupVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.1
hwL2mcGroupVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.2
hwL2mcGroupGroupAddress The IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.3
hwL2mcGroupSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.4
hwL2mcPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Constraints: range: 0-31 Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.5
hwL2mcGroupPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.6
hwL2mcGroupPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 4-32	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.7
hwL2mcGroupPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.8
hwL2mcGroupPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.9
hwL2mcGroupVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.10
hwL2mcSourceUpTime How long the source group exists in the forwarding entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.14
hwL2mcSourceExpires The timeout period of the source group in the forwarding entry, that is, the aging time of the source group.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.15
hwL2mcGroupUpTime How long the group exists in the forwarding entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.16
hwL2mcGroupExpires When the group expires in the forwarding entry, that is, the aging time of the source group.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.17
hwL2mcGroupFilterFlag The filtering mode: 1: include 2: exclude 3: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.18
hwL2mcGroupHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.19
hwL2mcGroupHostFlag2 Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping	Enumeration Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.20
hwL2mcGroupRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.5.1.1.100

Table contains l2 multicast static group information
for IGMP Snooping.

hwL2mcGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.6.1.1

An entry is created for each active VLAN or VSI in the device create a static group entry and delete when
a static group entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwGroupCfgPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Enumerated Values: 1 version1 2 version2 3 version3 4 versionAll	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1
hwGroupCfgPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.2
hwGroupCfgPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.3
hwGroupCfgPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.4
hwGroupCfgPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.5
hwGroupCfgVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.6
hwGroupCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.7
hwGroupCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Enumerated Values: 1 ssm 2 asm	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.8
hwGroupCfgGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.9
hwGroupCfgSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.10
hwGroupCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.6.1.1.100

This table contains the configuration of the source address list of SSM-Mapping.

hwL2mcSsmSourceEntry row .1.3.6.1.4.1.2011.5.25.181.1.7.1.1

An entry is created for each active VLAN or VSI in the device add an entry for SSM-Mapping.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcSsmSourceVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.1
hwL2mcSsmSourceVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Constraints: range: 0-16384	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.2
hwL2mcSsmGroupAddress The IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.3
hwL2mcSsmGroupLen The mask length of a multicast group.	Integer32 Constraints: range: 0-10000000	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.4
hwL2mcSsmSourceAddress The source address of SSM-Mapping, which serves as an index of this table.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.5
hwL2mcSsmSourceRowStatus The row status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-0 range: 2000-3999 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.7.1.1.100

In this table, you can query or configure a group policy to filter entries on a port.

hwL2mcPortGroupPolicyCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.8.1.1

An entry is created for each active VLAN or VSI in the device when a group policy added.

Indexes

No indexes recorded

Column	Syntax	OID
hwPortGroupPolicyPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 9: batch config qinq port ce VLAN ID 10: batch config dot1q te…	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.1
hwPortGroupPolicyPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.2
hwPortGroupPolicyPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.3
hwPortGroupPolicyPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.4
hwPortGroupPolicyPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Constraints: range: 1-100000	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.5
hwPortGroupPolicyVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.6
hwPortGroupPolicyVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.7
hwPortGroupPolicyVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.8
hwPortGroupPolicyAclNum The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.9
hwPortGroupPolicyIgmpVersion The IGMP version. The value ranges from 1 to 4. The default is 4, indicating that no version is specified.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.10
hwPortGroupPolicyRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.8.1.1.100

This table describes the configurations of a channel.

hwL2mcChnlCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.9.1.1

An entry of channel is created for each VLAN or VSI in the device create an channel.

Indexes

No indexes recorded

Column	Syntax	OID
hwChnlCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from…	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.9.1.1.1
hwChnlCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.	OctetString Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.9.1.1.2
hwChnlCfgChnlName The channel name.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.9.1.1.3
hwChnlCfgChnlType The channel type: 1: SSM 2: ASM	Enumerationr/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.181.1.9.1.1.9
hwChnlCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-16384 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.9.1.1.100

This table describes the configurations of IGMP snooping CAC in a VLAN or a VSI.

hwL2mcLimitEntry row .1.3.6.1.4.1.2011.5.25.181.1.10.1.1

An entry is created for each IGMP snooping CAC in a VLAN or a VSI.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcLimitVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global. The value ranges …	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.1
hwL2mcLimitVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.2
hwL2mcLimitChnlName The channel name.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.3
hwL2mcLimitMaxEntry The maximum number of forwarding entries. The value 0 indicates that the number is invalid.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.4
hwL2mcLimitEntryCnt The number of current forwarding entries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.5
hwL2mcLimitMaxBandWidth The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.6
hwL2mcLimitBandWidth The current bandwidth.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.7
hwL2mcLimitAcl The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.	Integer32r/w Constraints: range: 16-32	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.8
hwL2mcLimitCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.10.1.1.100

Description.

hwL2mcLimitGroupEntry row .1.3.6.1.4.1.2011.5.25.181.1.10.2.1

Description.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcLimitGroupIndex Description.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.10.2.1.1
hwL2mcLimitGroupStartAddr Description.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.10.2.1.2
hwL2mcLimitGroupEndAddr Description.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.10.2.1.3
hwL2mcLimitGroupBandwidth Description.	Unsigned32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.10.2.1.4

This table describes the configurations of IGMP snooping CAC on an interface.

hwL2mcPortLimitEntry row .1.3.6.1.4.1.2011.5.25.181.1.11.1.1

An entry is created for each IGMP snooping CAC on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
hwPortLimitVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.1
hwPortLimitVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.2
hwPortLimitPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 9: batch config qinq port ce VLAN ID 10: batch config dot1q termination port ce VLAN ID	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.3
hwPortLimitIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Constraints: range: 1-4294967295 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.4
hwPortLimitPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.5
hwPortLimitCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.6
hwPortLimitPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Enumerated Values: 1 static 2 dynamic 3 staticDynamic Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.7
hwPortLimitVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.8
hwPortLimitChnlName The channel name.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.9
hwPortLimitAcl The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.10
hwPortLimitMaxEntry The maximum number of forwarding entries. The value 0 indicates that the number is invalid.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.11
hwPortLimitEntryCnt The number of current forwarding entries.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.12
hwPortLimitMaxBandWidth The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.13
hwPortLimitBandWidth The current bandwidth.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.14
hwPortLimitCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4294967295 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.11.1.1.100

Table contains l2 multicast fast forward information for IGMP Snooping.

hwL2mcFastChnlCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.12.1.1

An entry is created for each IGMP snooping fast channel.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcFastChnlCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.1
hwL2mcFastChnlCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.2
hwL2mcFastChnlCfgGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.3
hwL2mcFastChnlCfgGroupLen The mask length of a multicast group address.	Integer32	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.4
hwL2mcFastChnlCfgSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.5
hwL2mcFastChnlCfgSourceLen The mask length of a multicast source address.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.6
hwL2mcFastChnlCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.12.1.1.100

Table contains l2 multicast router port information for IGMP Snooping.

hwL2mcRouterPortInfoEntry row .1.3.6.1.4.1.2011.5.25.181.1.13.1.1

An entry is created for each IGMP snooping router port on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcRouterPortVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-0 range: 8-32	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.1
hwL2mcRouterPortVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.2
hwL2mcRouterPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.3
hwL2mcRouterPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.4
hwL2mcRouterPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.5
hwL2mcRouterPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.6
hwL2mcRouterPortPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.7
hwL2mcRouterPortVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32 Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.8
hwL2mcRouterPortGroupUpTime How long the group exists in the forwarding entry.	SNMPv2-SMICounter32 Enumerated Values: 1 version1 2 version2 3 version3 4 versionAll Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.16
hwL2mcRouterPortGroupExpires The timeout period of the router port, that is, the aging time of the router port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.17
hwL2mcRouterPortGroupHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.13.1.1.19

Table contains l2 multicast configuration of router port for IGMP Snooping.

hwL2mcRouterPortCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.14.1.1

An entry is created for each IGMP snooping static router port on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcRouterPortCfgPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Constraints: range: 0-31 Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.1
hwL2mcRouterPortCfgPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Enumerated Values: 1 forward 2 discard Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.2
hwL2mcRouterPortCfgPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.3
hwL2mcRouterPortCfgPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.4
hwL2mcRouterPortCfgPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.5
hwL2mcRouterPortCfgVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.6
hwL2mcRouterPortCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.7
hwL2mcRouterPortCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.8
hwL2mcRouterPortCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.14.1.1.100

This table describes the group configurations of a channel.

hwL2mcChnlGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.15.1.1

An entry of channel is created for each VLAN or VSI in the device create an channel.

Indexes

No indexes recorded

Column	Syntax	OID
hwChnlGroupCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from…	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.1
hwChnlGroupCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.2
hwChnlCfgGroupChnlName The channel name.	OctetString Constraints: range: 1-4	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.3
hwChnlGroupCfgGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.4
hwChnlGroupCfgGroupLen The mask length of a multicast group.	Integer32	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.5
hwChnlGroupCfgSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.6
hwChnlGroupCfgSourceLen The mask length of a multicast source address.	Integer32	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.7
hwChnlGroupCfgPerBand The bandwidth of a multicast group.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.9
hwChnlGroupCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.15.1.1.100

In this table, you can query or configure a group policy to filter entries on a port.

hwL2mcGroupPolicyCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.16.1.1

An entry is created for each active VLAN or VSI in the device when a group policy added.

Indexes

No indexes recorded

Column	Syntax	OID
hwGroupPolicyVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.16.1.1.1
hwGroupPolicyVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.16.1.1.2
hwGroupPolicyAclNum The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.181.1.16.1.1.3
hwGroupPolicyIgmpVersion The IGMP version. The value ranges from 1 to 4. The default is 4, indicating that no version is specified.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.181.1.16.1.1.4
hwGroupPolicyRowStatus The row status.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4294967295 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.16.1.1.100

This table describes the configurations of deny unspecified group for each VLAN or VSI, or in global.

hwL2mcChnlDenyCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.17.1.1

An entry of channel deny is created for each VLAN or VSI in the device create an channel.

Indexes

No indexes recorded

Column	Syntax	OID
hwChnlDenyCfgVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from…	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 1-4	.1.3.6.1.4.1.2011.5.25.181.1.17.1.1.1
hwChnlDenyCfgVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.17.1.1.2
hwChnlDenyCfg Whether discard unspecified channel: 1: not discard 2: discard	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.181.1.17.1.1.3
hwChnlDenyCfgRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.17.1.1.100

This table describes the specific port statistic of QinQ table of protol.

hwL2mcQinQPortEntry row .1.3.6.1.4.1.2011.5.25.181.1.18.1.1

An entry of the specific port statistic of QinQ table of protol.

Indexes

No indexes recorded

Column	Syntax	OID
hwQinQPortVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from…	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.1
hwQinQPortVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.2
hwL2mcQinQPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.3
hwQinQPortGroupAddr The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.4
hwQinQPortSourceAddr The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.5
hwQinQPortPe The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.6
hwQinQPortCe The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.7
hwQinQPortTime The number of QinQ Port entry live time in second.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.20
hwQinQPortFlag The port flag: 1 static 2 dynamic 3 static and dynamic 4 invalid	Integer32	.1.3.6.1.4.1.2011.5.25.181.1.18.1.1.21

This table describes the host explicit tracking.

hwL2mcETrackingInfoEntry row .1.3.6.1.4.1.2011.5.25.181.1.19.1.1

An entry of the host explicit tracking.

Indexes

No indexes recorded

Column	Syntax	OID
hwETrackInfoSlotIndex The slot index, which is interface board number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.1
hwETrackInfoVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global. The value range…	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.2
hwETrackInfoVsiName The name of a VSI. If a VLAN is specified, the value is 32. If both hwETrackInfoVlanIndex and hwETrackInfoVsiName are invalid, the configuration is global.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.3
hwETrackInfoGroupAddr The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.4
hwETrackInfoSourceAddr The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.5
hwETrackInfoPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Enumerated Values: 1 ip 2 mac	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.6
hwETrackInfoPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Enumerated Values: 1 static 2 dynamic 3 staticDynamic 4 invalid Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.7
hwETrackInfoPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Enumerated Values: 1 nonMapping 2 mapping Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.8
hwETrackInfoPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Enumerated Values: 1 host 2 router Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.9
hwETrackInfoPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Enumerated Values: 1 port 2 static 3 both Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.10
hwETrackInfoVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.11
hwETrackInfoBoardNum The interface board number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.12
hwETrackInfoReportAddr The source IP address of a user.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.13
hwETrackInfoFlag The port filter mode: 1 include 2 exclude	Integer32	.1.3.6.1.4.1.2011.5.25.181.1.19.1.1.20

Table contains VLAN or VSI performance statistics information
for IGMP Snooping.

hwL2mcSourceGroupEntry row .1.3.6.1.4.1.2011.5.25.181.1.22.1.1

An entry is created for each active VLAN or VSI in the device
and deleted when the VLAN or VSI becomes inactive.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcSourceGroupVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.22.1.1.1
hwL2mcSourceGroupVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Enumerated Values: 1 include 2 exclude 3 invalid	.1.3.6.1.4.1.2011.5.25.181.1.22.1.1.2
hwL2mcSourceGroupGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.22.1.1.3
hwL2mcSourceGroupSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.22.1.1.4
hwL2mcSourceGroupStat the packet statistic of (S,G) group.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.181.1.22.1.1.10

Table contains l2 multicast forward information
for IGMP Snooping.

hwL2mcDTFwdEntry row .1.3.6.1.4.1.2011.5.25.181.1.23.1.1

An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
a forwarding table entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcDTFwdSlotIndex The slot index, which is interface board number.	SNMPv2-SMIInteger32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.1
hwL2mcDTFwdVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.2
hwL2mcDTFwdVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.3
hwL2mcDTFwdGroupAddress The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.4
hwL2mcDTFwdSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.5
hwL2mcDTFwdPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.6
hwL2mcDTFwdPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Enumerated Values: 1 static 2 dynamic 3 staticDynamic 4 invalid Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.7
hwL2mcDTFwdPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Enumerated Values: 1 nonMapping 2 mapping Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.8
hwL2mcDTFwdPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.9
hwL2mcDTFwdPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.10
hwL2mcDTFwdVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.11
hwL2mcDTFwdBoardNum The interface board number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.12
hwL2mcDTFwdAddressType The address type of an entry: 1: IP 2: MAC The default value is 1.	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.21
hwL2mcDTFwdHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.22
hwL2mcDTFwdHostFlag2 Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.23
hwL2mcDTFwdHostFlag3 The type of an interface created on a router: 1: Interface connected to the host 2: Router interface that replicates multicast data flows	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.24
hwL2mcDTFwdHostFlag4 Indicates (S, G) table created : 1: from port; 2: from static; 3: from both the default falue is 1	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.23.1.1.25

Table contains l2 multicast group information
for IGMP Snooping.

hwL2mcDTGroupInfoEntry row .1.3.6.1.4.1.2011.5.25.181.1.24.1.1

An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when
a forwarding table entry deleted.

Indexes

No indexes recorded

Column	Syntax	OID
hwL2mcDTGroupSlotIndex The slot index, which is interface board number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.1
hwL2mcDTGroupVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.2
hwL2mcDTGroupVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.3
hwL2mcDTGroupGroupAddress The IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.4
hwL2mcDTGroupSourceAddress The source IP address of a multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.5
hwL2mcDTGroupFilterFlag The filtering mode: 1: include 2: exclude 3: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.6
hwL2mcDTPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.7
hwL2mcDTGroupPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.8
hwL2mcDTGroupPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.9
hwL2mcDTGroupPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.10
hwL2mcDTGroupPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.11
hwL2mcDTGroupVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.12
hwL2mcDTGroupBoardNum The interface board number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.13
hwL2mcDTSourceUpTime How long the source group exists in the forwarding entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.21
hwL2mcDTSourceExpires The timeout period of the source group in the forwarding entry, that is, the aging time of the source group.	SNMPv2-SMICounter32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.22
hwL2mcDTGroupUpTime How long the group exists in the forwarding entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.23
hwL2mcDTGroupExpires When the group expires in the forwarding entry, that is, the aging time of the source group.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.24
hwL2mcDTGroupHostFlag1 The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.26
hwL2mcDTGroupHostFlag2 Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping	Enumeration	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.27
hwL2mcDTGroupRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.24.1.1.100

In this table, you can query or configure whether to disable receive multicast traffic on a port.

hwL2mcMulticastTrafficPolicyCfgEntry row .1.3.6.1.4.1.2011.5.25.181.1.25.1.1

An entry is created for each active VLAN or VSI in the device when disable receive multicast traffic on a port.

Indexes

No indexes recorded

Column	Syntax	OID
hwMulticastTrafficPolicyPortType The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface 6: Interface Board 7: Vlanif Port 11: Main-interface-bound-to-vsi	HWPortType Type Values: 1 invalid 2 pw 3 switchport 4 dot1q 5 termination 6 board 7 vlanPort 9 qinq-batch-config 10 dot1q-termination-batch-config 11 main-interface-bound-to-vsi	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.1
hwMulticastTrafficPolicyPortIfIndex The interface index. The value 0 indicates that the interface index is invalid.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.2
hwMulticastTrafficPolicyPortPeId The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.3
hwMulticastTrafficPolicyPortCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.4
hwMulticastTrafficPolicyPortEndCeId The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.5
hwMulticastTrafficPolicyPeerAddress The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.6
hwMulticastTrafficPolicyVcOrSiteId The VC ID or SITE ID of a PW interface.	Unsigned32	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.7
hwMulticastTrafficPolicyVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.8
hwMulticastTrafficPolicyEndVlanIndex The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.	Q-BRIDGE-MIBVlanIdOrAny Type Constraints: range: 1..4095	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.9
hwMulticastTrafficPolicyVsiName The name of a VSI. If a VLAN is specified, the value is 32.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.10
hwMulticastTrafficPolicyRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.181.1.25.1.1.100