HUAWEI-ISIS-CONF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
168

hwIsisProcBaseTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.1 · 1 row entry · 48 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisProcBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisProcBaseTable' 
The set of commands of the Integrated IS-IS protocol existing on the system.
hwIsisProcBaseEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.1.1
Each row defines some commmands to a single process of the IS-IS protocol existing on the system.
These commands belong to the IS-IS process.
Indexes
Column Syntax OID
hwIsisProcIdIndex
The value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1
hwIsisProcVpnName
The value of this object identifies the name of the IPv4 VPN instance bound to the IS-IS process. The value ranges from 0 to 31.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2
hwIsisProcVpn6Nameobsolete
The value of this object identifies the name of the IPv6 VPN instance bound to the IS-IS process. The value ranges from 0 to 31.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3
hwIsisProcAreaAuthType
The value of this object identifies the type of IS-IS area authentication.
null (0): Area authentication is not configured.
md5 (1): The password is sent after being encrypted through MD5.
simple (2): The password is se…
Enumerationr/w
Enumerated Values:
0null
1md5
2simple
3keychain
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4
hwIsisProcAreaAuthPasswordName
This object indicates the password of IS-IS area authentication. The password is a string of characters.
If the IS-IS area authentication mode is simple, the password is a string of 0 to 16 characters.
If the IS-IS area…
OctetStringr/w
Constraints:
range: 0-392
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5
hwIsisProcAreaAuthPacketAuthMode
The value of this object identifies the packet authentication mode of IS-IS area authentication:
none (0): Authentication mode is not configured.
authenticateall (1): Encapsulates authentication information for both tra…
Enumerationr/w
Enumerated Values:
0none
1authenticateall
2allsendonly
3snppacketauthenticationavoid
4snppacketsendonly
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6
hwIsisProcAreaAuthCode
The value of this object identifies the code of area authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indicates IP authentication.
Enumerationr/w
Enumerated Values:
0none
10osi
133ip
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7
hwIsisProcDomainAuthType
The value of this object identifies the type of IS-IS router domain authentication.
null (0): Domain authentication is not configured.
md5 (1): The password is sent after being encrypted through MD5.
simple (2): The pas…
Enumerationr/w
Enumerated Values:
0null
1md5
2simple
3keychain
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8
hwIsisProcDomainAuthPasswordName
This object indicates the password of IS-IS routing domain authentication. The password is a string of characters.
If the IS-IS routing domain authentication mode is simple, the password is a string of 0 to 16 character…
OctetStringr/w
Constraints:
range: 0-392
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9
hwIsisProcDomainAuthPacketAuthMode
The value of this object identifies the packet authentication mode of IS-IS route domain authentication.
none (0): Authentication mode is not configured.
authenticateall (1): Encapsulates authentication information for …
Enumerationr/w
Enumerated Values:
0none
1authenticateall
2allsendonly
3snppacketauthenticationavoid
4snppacketsendonly
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10
hwIsisProcDomainAuthCode
The value of this object identifies the code of domain authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indicates IP authentication.
Enumerationr/w
Enumerated Values:
0none
10osi
133ip
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11
hwIsisProcLevel
The value of this object identifies the level of the IS-IS process.
level1 (1): indicates level 1.
level2 (2): indicates level 2.
level12 (3): indicates level 1-2.
By default, the level of an IS-IS process is level-1-2.
Enumerationr/w
Enumerated Values:
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12
hwIsisProcL1FlashFloodCount
The value of this object identifies the counter of level-1 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13
hwIsisProcL1FlashFloodInterval
The value of this object identifies the intervals for level-1 LSP flooding.
The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms.
millionsecondsInteger32r/w
Constraints:
range: 0-0
range: 10-50000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14
hwIsisProcL2FlashFloodCount
The value of this object identifies the counter of level-2 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15
hwIsisProcL2FlashFloodInterval
The value of this object identifies the intervals for level-2 LSP flooding.
The value ranges from 10 to 50000 in milliseconds. The default value is 10ms.
millionsecondsInteger32r/w
Constraints:
range: 0-0
range: 10-50000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16
hwIsisProcLogPeerChange
Generates a log when the status of the peer changes.
null (0): not configured
enabledwithouttopology (1): IPv4 topology
enabledwithtopology (2): IPv6 topology
Enumerationr/w
Enumerated Values:
0null
1enabledwithouttopology
2enabledwithtopology
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17
hwIsisProcTimerRefresh
The value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default value is 900s.
secondsInteger32r/w
Constraints:
range: 1-65534
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18
hwIsisProcTimerMaxAge
The value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The default value is 1200s.
secondsInteger32r/w
Constraints:
range: 2-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19
hwIsisProcL1TimerLspGenMaxInterval
The value of this object identifies the timer for the maximum delay of level-1 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s.
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20
hwIsisProcL1TimerLspGenInitInterval
The value of this object identifies the delay timer that initially triggers a level-1 LSP.
The value ranges from 0 to 60000, in milliseconds.
By default, the value is 0.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21
hwIsisProcL1TimerLspGenIncrInterval
The value of this object identifies the delay timer for generating two level-1 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22
hwIsisProcL2TimerLspGenMaxInterval
The value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s.
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23
hwIsisProcL2TimerLspGenInitInterval
The value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24
hwIsisProcL2TimerLspGenIncrInterval
The value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25
hwIsisProcTimerSPFMaxInterval
The value of this object identifies the maximum intervals for SPF calculation.
The value ranges from 1 to 120, in seconds. By default, the value is 5s.
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26
hwIsisProcTimerSPFInitInterval
The value of this object identifies the delay timer for initial SPF calculation.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 50ms.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27
hwIsisProcTimerSPFIncrInterval
The value of this object identifies the incremental delay timer for two SPF calculations.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 200ms.
millionsecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28
hwIsisProcCostStyle
Configures the cost type of the IS-IS process:
narrow (1): the narrow type
narrowcompatible (2): the narrow-compatible type
compatible (3): compatible type
wide (4): wide type
widecompatible (5): wide-compatible type
na…
Enumerationr/w
Enumerated Values:
1narrow
2narrowcompatible
3compatible
4wide
5widecompatible
6narrowcompatiblerelax
7compatiblerelax
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29
hwIsisProcDynamicName
Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters. When the length is 0, the configured IS-IS dynamic host name is deleted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30
hwIsisProcGREnabled
Whether to enable IS-IS GR.
true (1): enables IS-IS GR.
false (2): does not enable IS-IS GR.
By default, IS-IS GR is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31
hwIsisProcGRInterval
The value of this object identifies the maximum intervals for enabling GR.
The value ranges from 0 to 1800, in seconds. By default, the value is 300 seconds.
The value 0 indicates that GR is not configured.
secondsInteger32r/w
Constraints:
range: 0-0
range: 30-1800
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32
hwIsisProcGRSuppresSAEnabled
This object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started:
true (1): enables this function.
false (2): disables this function.
By default, IS-IS does not suppress …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33
hwIsisProcTEEnableLevel
Enables IS-IS TE.
none (0): does not enable IS-IS TE.
level1 (1): enables level-1 TE.
level2 (2): enables level-2 TE.
level12 (3): enables level-1-2 TE.
By default, IS-IS TE is disabled.
Enumerationr/w
Enumerated Values:
0none
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34
hwIsisProcBFDEnabled
Whether to enable BFD on each interface.
true (1): enables BFD on each interface.
false (2): does not enable BFD on each interface.
By default, BFD is disabled on each interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35
hwIsisProcBFDFrrBindEnabled
Enables BFD-FRR binding on each interface.
true (1): enables BFD-FRR binding on each interface.
false (2): does not enable BFD-FRR binding on each interface.
By default, BFD-FRR binding is disabled on each interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36
hwIsisProcBFDMinTxInterval
The value of this object identifies the minimum interval for sending BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37
hwIsisProcBFDMinRecvInteval
The value of this object identifies the minimum interval for receiving BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero.
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38
hwIsisProcBFDMultiplier
The value of this object identifies the local detection multiplier. The value ranges from 1 to 255.
If isis binding to vpn and ipv4-family not enable, The value is zero.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39
hwIsisProcIPv6EnableTopologyType
This objects indicates whether the IPv6 topology is enabled for the IS-IS process:
disable(0): disables the IPv6 topology of the IS-IS process.
standard(1): specifies the topology type as the standard mode.
ipv6(2): ena…
Enumerationr/w
Enumerated Values:
0disable
1standard
2ipv6
3compatible
4compatibleenablemtspf
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40
hwIsisProcRowStatus
This object supports settings of two values.
createAndGo(4): A row is created.
destroy(6): A row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41
hwIsisProcOptionalChecksumEnabled
Enables BFD-FRR binding on each interface.
true (1): enables optional checksum for CSNP,PSNP and IIH PDU.
false (2): disables optional checksum for CSNP,PSNP and IIH PDU.
By default, optional checksum is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.42
hwisisProcLsdbMaxLimit
This object is used to set the maximum limit number of IS-IS LSPs.
The value range is from 0 to 500000.
The default value 0 means no limit.
Unsigned32r/w
Constraints:
range: 0-500000
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.43
hwIsisProcLsdbUpperThreshold
This object is used to set the upper threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 80.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.44
hwIsisProcLsdbLowerThreshold
This object is used to set the lower threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 70.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.45
hwIsisProcLsdbTotal
This object is used to get the number of IS-IS LSPs.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.46
hwIsisProcAreaAuthKeychainName
This object indicates the keychain name of IS-IS area authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS area authentication keychain nam…
OctetStringr/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.47
hwIsisProcDomainAuthKeychainName
This object indicates the keychain name of IS-IS domain authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS domain authentication keychain…
OctetStringr/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.48

hwIsisNETTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisNETTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisNETTable' 
Set of network entities of process.
hwIsisNETEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.2.1
Each row means one network entity of the process.
Indexes
Column Syntax OID
hwIsisNETIndex
The value of this object identifies the NET index. It is a string of 8 to 20 bytes.
OctetString
Constraints:
range: 8-20
 .1.3.6.1.4.1.2011.5.25.24.2.1.2.1.1
hwIsisNETStatus
The value of this object identifies the status of the NET table.
createAndGo(4): A row is created.
destroy(6): A row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.2.1.2

hwIsisProcMTExtTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.3 · 1 row entry · 33 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisProcMTExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisProcMTExtTable' 
Set of commands of the integrated IS-IS protocol existing on the system, 
which are different for IP type and MT.
hwIsisProcMTExtEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.3.1
Each row defines some commands specific to a single process of the IS-IS protocol existing on the system.
These commands are different from ProcBaseTable for IP type and MT.
Indexes
Column Syntax OID
hwIsisIpTypeIndex
This object indicates the IP protocol type:
ipv4(1): indicates IPv4.
ipv6(2): indicates IPv6.
InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1
hwIsisMTIdIndex
The value of this object identifies the MT ID.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2
hwIsisMTName
This object indicates the name of the topology to be bound to an IS-IS process. The value is a string of 1 to 31 characters.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3
hwIsisProcDefRoutAdvType
This object is used to set the mode in which default routes are advertised:
null(0): indicates that default routes are not advertised.
always(1): indicates that default routes are always advertised.
matchdefault(2): If …
Enumerationr/w
Enumerated Values:
0null
1always
2matchdefault
3routepolicy
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4
hwIsisProcDefRoutAdvPolicyName
This object indicates the routing policy name.
The name is a string of 0 to 40 characters.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5
hwIsisProcDefRoutAdvCost
This object is used to set the cost of a default route.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6
hwIsisProcDefRoutAdvTag
This object is used to set the administrative tag of a default route.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7
hwIsisProcDefRoutAdvLevel
This object is used to set the level of a default route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the level of a default route is Level-2.
Enumerationr/w
Enumerated Values:
0null
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8
hwIsisProcDefRoutAdvAvoidLearnEnabled
This object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table:
true(1): indicates that an IS-IS process is prevented from learning default routes or adding …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9
hwIsisProcL1CircuitCost
Global level-1 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value is from 1 to 63.
Integer32r/w
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10
hwIsisProcL2CircuitCost
Global level-2 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value is from 1 to 63.
Integer32r/w
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11
hwIsisProcPrefValue
This object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15.
If isis binding to vpn and ip-family not enable, The value is zero.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12
hwIsisProcPrefPolicyName
This object indicates the name of the routing policy used for route filtering. The name is a string of 0 to 40 characters.
Zero-length means no configuration.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13
hwIsisProcMaxLoadBalance
This object is used to set the number of equal-cost routes.
The range and the default value depend on license.
If isis binding to vpn and ip-family not enable, The value is zero.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14
hwIsisProcL1CircuitDefaultTag
This object is used to set the default administrative tag of an IS-IS Level-1 route.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15
hwIsisProcL2CircuitDefaultTag
This object is used to set the default administrative tag of an IS-IS Level-2 route.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16
hwIsisProcBandWidthReference
This object is used to set the reference bandwidth.
Unsigned32r/w
Constraints:
range: 1-2147483648
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17
hwIsisProcAutoCostEnabled
This object indicates whether automatic interface cost calculation is enabled:
true(1): indicates that automatic interface cost calculation is enabled.
false(2): indicates that automatic interface cost calculation is di…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18
hwIsisProcSetOverLoad
This object indicates whether a device is enabled to notify its neighbors that its status is Overload:
disable (0): indicates that a device is disabled from notifying its neighbors that its status is Overload.
enable(1)…
Enumerationr/w
Enumerated Values:
0disable
1enable
2onstartup
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19
hwIsisProcSetOverLoadAllowRoute
This object indicates that the type of routes to be advertised when a device is in the Overload state:
null(0): indicates that no route type is specified.
external(1): indicates the imported external routes.
interlevel(…
Enumerationr/w
Enumerated Values:
0null
1external
2interlevel
3externalandinterlevel
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20
hwIsisProcOnStartInterval
The value of this object identifies the interval for waiting to clear the overload bit after the system is started.
The value ranges from 5 to 86400, in seconds. The default value is 600s.
secondsInteger32r/w
Constraints:
range: 0-0
range: 5-86400
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.21
hwIsisProcOnStartStartFromPeer
This object indicates the system ID of a neighbor.
OctetStringr/w
Constraints:
range: 0-0
range: 12-14
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22
hwIsisProcOnStartFromPeerInterval
The value of this object identifies the maximum interval for waiting to clear the
overload bit after the system is started and the neighbor relationship is established.
The value ranges of set is from 5 to 86400, in se…
secondsInteger32r/w
Constraints:
range: 0-0
range: 5-86400
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23
hwIsisProcOnStartWaitForBgpEnabled
This object indicates whether the function of waiting for BGP convergence is enabled:
true(1): indicates that the function of waiting for BGP convergence is enabled.
false(2): indicates that the function of waiting for …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24
hwIsisProcMTStatus
This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25
hwIsisProcL1RedistMaxLimit
This object is used to set the maximum limit number of IS-IS Level-1 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no limit.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.26
hwIsisProcL2RedistMaxLimit
This object is used to set the maximum limit number of IS-IS Level-2 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no limit.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27
hwIsisProcL1UpperRedistThreshold
This object is used to set the upper threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 80.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.28
hwIsisProcL2UpperRedistThreshold
This object is used to set the upper threshold value of level-2 import limit.
The value range is from 1 to 100.
The default means 80.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29
hwIsisProcL1LowerRedistThreshold
This object is used to set the lower threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 70.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.30
hwIsisProcL2LowerRedistThreshold
This object is used to set the lower threshold value of level-2 import limit.
The value range is from 1 to 100
The default means 70.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.31
hwIsisProcL1TotalRedist
This object is used to get the number of level-1 import routes.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.32
hwIsisProcL2TotalRedist
This object is used to get the number of level-2 import routes.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.33

hwIsisPrefixPriorityTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisPrefixPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisPrefixPriorityTable' 
Set of commands of priority-based convergence.
hwIsisPrefixPriorityEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.4.1
Entry of priority-based convergence, each entry means one priority-based command for IS-IS process.
Indexes
Column Syntax OID
hwIsisPrefixPriorityTypeIndex
This object indicates the preference of a route:
medium(1): indicates medium.
high(2): indicates high.
critical(3): indicates critical.
Enumeration
Enumerated Values:
1medium
2high
3critical
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.1
hwIsisPrefixPriorityL1PolicyType
This object indicates the type of a Level-1 route preference policy:
none(0): indicates that no policy type is specified.
prefix(1): indicates the IP prefix policy.
tag(2): indicates the administrative tag policy.
Enumerationr/w
Enumerated Values:
0none
1prefix
2tag
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.2
hwIsisPrefixPriorityL2PolicyType
This object indicates the type of a Level-2 route preference policy:
none(0): indicates that no policy type is specified.
prefix(1): indicates the IP prefix policy.
tag(2): indicates the administrative tag policy.
Enumerationr/w
Enumerated Values:
0none
1prefix
2tag
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.3
hwIsisPrefixPriorityL1IpPrefixName
This object indicates the name of a Level-1 IP prefix policy.
The name is a string of 0 to 169 characters.
Zero-length means no configuration.
OctetStringr/w
Constraints:
range: 0-169
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.4
hwIsisPrefixPriorityL2IpPrefixName
This object indicates the name of a Level-2 IP prefix policy.
The name is a string of 0 to 169 characters.
Zero-length means no configuration.
OctetStringr/w
Constraints:
range: 0-169
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.5
hwIsisPrefixPriorityL1TagValue
This object indicates the administrative tag of the Level-1 route preference.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.6
hwIsisPrefixPriorityL2TagValue
This object indicates the administrative tag of the Level-2 route preference.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.7

hwIsisSummaryTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.5 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisSummaryTable' 
Set of IP summary addresses to use.
hwIsisSummaryEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.5.1
Each entry contains one IP summary address.
Indexes
Column Syntax OID
hwIsisSummaryIPIndex
This object indicates the IP address of the summarized route.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.1
hwIsisSummaryMaskIndex
This object indicates the subnet mask of the summarized route.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.2
hwIsisSummaryAvoidFeedBackEnabled
This object indicates whether the function of avoiding learning the summarized routes through SPF calculation is enabled:
true(1): indicates that the function is enabled.
false(2): indicates that the function is disable…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.3
hwIsisSummaryGenNull0RouteEnabled
This object indicates whether the function of generating Null0 routes during route summarization is enabled:
true(1): indicates that the function is enabled.
false(2): indicates that the function is disabled.
By default…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.4
hwIsisSummaryLevel
This object indicates the level of the summarized route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
Enumerationr/w
Enumerated Values:
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.5
hwIsisSummaryTag
This object indicates the administrative tag of the summarized route.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.6
hwIsisSummaryStatus
This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.7

hwIsisImportRouteTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.6 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisImportRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisImportRouteTable' 
Set of import route command.
hwIsisImportRouteEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.6.1
Entry of import route command.
Indexes
Column Syntax OID
hwIsisImportProtocolIndex
This object indicates the routing protocol of the imported routes:
direct(1): indicates direct.
static(2): indicates static.
rip(3): indicates RIP.
ospf(4): indicates OSPF
isis(5): indicates IS-IS.
bgp(6): For VPN insta…
Enumeration
Enumerated Values:
1direct
2static
3rip
4ospf
5isis
6bgp
7ospfv3
8ripng
9bgpIbgp
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.1
hwIsisImportProcessIdIndex
Process ID of the route protocols. The range is from 1 to 65535.
If the protocol is direct, static or bgp, this value can only be 1.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.2
hwIsisImportInheritCostEnabled
This object indicates whether the original cost of the source route is inherited:
true(1): indicates that the original cost of the source route is inherited.
false(2): indicates that the original cost of the source rout…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.3
hwIsisImportCost
Cost of the imported routes.
If the costStyle of the process is wide or widecompatible,
the range of this value is from 0 to 4261412864,
else the range of this value is from 0 to 63. 0 means no configuration.
Unsigned32r/w
Constraints:
range: 0-4261412864
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.4
hwIsisImportCostType
This object indicates the cost type of the imported external route. This object does not apply to IPv6.
internal(1): indicates internal.
external(2): indicates external.
This node is invalid for IPv6. By default, the co…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.5
hwIsisImportLevel
This object indicates the local IS-IS level of the imported route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
Enumerationr/w
Enumerated Values:
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.6
hwIsisImportTag
This object indicates the administrative tag assigned to an imported route.
If this object is not configured, the value will be 0.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.7
hwIsisImportPolicyName
This object indicates the name of the routing policy used to import routes.
The name is a string of 0 to 40 characters.
The length 0 indicates that no name is configured for the routing policy used to import routes.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.8
hwIsisImportRouteStatus
This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.9

hwIsisRouteLeakTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisRouteLeakTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisRouteLeakTable' 
Set of route leak commands.
hwIsisRouteLeakEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.7.1
Entry of route leak commands.
Indexes
Column Syntax OID
hwIsisRouteLeakTypeIndex
This object indicates the index of the route leaking type:
level1intolevel2(1): indicates that Level-1 routes are leaked to Level-2.
level2intolevel1(2): indicates that Level-2 routes are leaked to Level-1.
Enumeration
Enumerated Values:
1level1intolevel2
2level2intolevel1
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.1
hwIsisRouteLeakTag
This object indicates the tag of route leaking.
If the tag is not configured, the reading value will be 0.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.2
hwIsisRouteLeakFilterPolicyType
This object indicates the type of the policy used for route leaking:
none(0): indicates that no policy type is specified.
basicAcl(1): indicates the number of a basic ACL.
aclName(2): indicates the ACL name.
ipPrefix(3)…
Enumerationr/w
Enumerated Values:
0none
1basicAcl
2aclName
3ipPrefix
4routePolicy
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.3
hwIsisRouteLeakFilterPolicyBasicAcl
The value of this object identifies the number of a basic ACL.
The value ranges from 2000 to 2999.
0 means no configuration, The range of this value is from 2000 to 2999.
Integer32r/w
Constraints:
range: 0-0
range: 2000-2999
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.4
hwIsisRouteLeakFilterPolicyPolicyName
The policy name of route leak. If policy type is aclName, the length of this value is from 1 to 32.
If policy type is ipPrefix
the length of this value is from 1 to 169.
If policy type is routePolicy, the length of t…
OctetStringr/w
Constraints:
range: 0-169
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.5
hwIsisRouteLeakStatus
This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.6

hwIsisFrrTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisFrrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisFrrTable' 
Set of Frr commands.
hwIsisFrrEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.8.1
Entry of frr commands for the specific MT of process.
Indexes
Column Syntax OID
hwIsisFrrPolicyName
The value of this object identifies the FRR policy name.
The value is a string of 1 to 40 characters. Value 0 indicates that the FRR policy is deleted.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.1
hwIsisFrrLoopFreeAltLevel
The value of this object identifies the level of the FRR LFA algorithm.
null(0): cancels the operation of the LFA algorithm.
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
Enumerationr/w
Enumerated Values:
0null
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.2
hwIsisFrrEnabled
The value of this object identifies the status of FRR:
enable(1): enables FRR.
disable(2): disables FRR.
By default, FRR is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.3

hwIsisIntfBaseTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.21 · 1 row entry · 41 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisIntfBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisIntfBaseTable' 
Set of commands on interface of the Integrated IS-IS protocol existing on the system.
hwIsisIntfBaseEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.21.1
Each row defines some commands to a single interface of the IS-IS protocol existing on the system.
Indexes
Column Syntax OID
hwIsisInterfaceIndex
The value of this object identifies the interface index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1
hwIsisEnableIPProtocol
The value of this object identifies the status of IPv4 IS-IS on an interface:
enable(1): enables IPv4 IS-IS.
disable(2): disables IPv4 IS-IS.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2
hwIsisEnableIPv6Protocol
The value of this object identifies the status of IPv6 IS-IS on an interface:
enable(1): enables IPv6 IS-IS.
disable(2): disables IPv6 IS-IS.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3
hwIsisCircLevel
The value of this object identifies the level of an interface:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the interface is at Level-1-2.
Enumerationr/w
Enumerated Values:
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4
hwIsisCircSimulation
The value of this object identifies whether the broadcast interface is simulated as a P2P interface:
enable(1): indicates that the broadcast interface is simulated as a P2P interface.
disable(2): indicates that the broa…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5
hwIsisCircL1HelloInterval
The value of this object identifies the interval for sending Level-1 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s.
secondsInteger32r/w
Constraints:
range: 3-255
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6
hwIsisCircL2HelloInterval
The value of this object identifies the interval for sending Level-2 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s.
secondsInteger32r/w
Constraints:
range: 3-255
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7
hwIsisCircL1HelloMultiplier
The value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1000. By default, the value is 3.
Integer32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8
hwIsisCircL2HelloMultiplier
The value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1000. By default, the value is 3.
Integer32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9
hwIsisCircL1AuthMode
The value of this object identifies the mode of authenticating Level-1 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that the password is encrypted through MD5 and th…
Enumerationr/w
Enumerated Values:
0null
1md5
2simple
3keychain
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10
hwIsisCircL1AuthText
The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the password is a string of 0 to 16 characte…
OctetStringr/w
Constraints:
range: 0-392
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11
hwIsisCircL1AuthSendOnly
The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
fals…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12
hwIsisCircL1AuthCode
The value of this object identifies the authentication code of Level-1 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
ip(133): indicates IP authentication.
Enumerationr/w
Enumerated Values:
0none
10osi
133ip
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13
hwIsisCircL2AuthMode
The value of this object identifies the mode of authenticating Level-2 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that password is encrypted through MD5 and then s…
Enumerationr/w
Enumerated Values:
0null
1md5
2simple
3keychain
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14
hwIsisCircL2AuthText
The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the password is a string of 0 to 16 characte…
OctetStringr/w
Constraints:
range: 0-392
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15
hwIsisCircL2AuthSendOnly
The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
fals…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16
hwIsisCircL2AuthCode
The value of this object identifies the authentication code of Level-2 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
ip(133): indicates IP authentication.
Enumerationr/w
Enumerated Values:
0none
10osi
133ip
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17
hwIsisCircLdpSync
The value of this object identifies the status of synchronization of IS-IS and LDP:
enable(1): enables synchronization of IS-IS and LDP.
disable(2): disables synchronization of IS-IS and LDP.
By default, synchronization…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18
hwIsisCircLdpSyncHoldDown
The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65535, in seconds. By default, the value is 10s. 0 means to stop Holddown tim…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19
hwIsisCircLdpHldMaxCost
The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65536, in seconds.
By default, the value is 10s. The value of 65536 mea…
Integer32r/w
Constraints:
range: -1-65536
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20
hwIsisCircSmallHello
The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field:
enable(1): indicates that IS-IS sends small Hello PDUs without the padding field.
disable(2): indicates that IS-IS does…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21
hwIsisCircIpIgnore
The value of this object identifies whether the segment in an IP address is checked:
enable(1): indicates that the segment in an IP address is not checked.
disable(2): indicates that the segment in an IP address is chec…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22
hwIsisCircSenseRpr
The value of this object identifies whether fast RPR loop detection is enabled:
enable(1): enables fast RPR loop detection.
disable(2): disables fast RPR loop detection.
By default, fast RPR loop detection is disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23
hwIsisCircPadHello
The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field:
enable(1): indicates that IS-IS sends standard Hello PDUs with the padding field.
disable(2): indicates that IS-IS does…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24
hwIsisCircLspRetransInterval
The value of this object identifies the interval for resending LSPs.
The value ranges from 1 to 300, in seconds. The default value is 5.
This object applies to only P2P interfaces.
secondsInteger32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25
hwIsisL1CsnpTimerValue
The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26
hwIsisL2CsnpTimerValue
The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27
hwIsisLspThrottleInterval
The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to 10000, in milliseconds.
By default, the value is 50.
milliseconds.Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28
hwIsisLspThrottleCount
The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000.
By default, it is 10.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29
hwIsisCircL1DisPriority
The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64.
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30
hwIsisCircL2DisPriority
The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64.
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31
hwIsisCircSilent
The value of this object identifies whether the status of an IS-IS interface is set to silent.
enable(1): indicates that the status of IS-IS interface is set to silent.
disable(2): indicates that the status of IS-IS int…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32
hwIsisCircMeshGroup
The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-group ID is not set.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33
hwIsisCircMeshBlock
The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be:
enable(1): enables the mesh block function.
disable(2): dis…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34
hwIsisCircDisName
The value of this object identifies the DIS name of an interface.
The configuration is applicable to only a broadcast interface. The value is a string of 0 to 64 characters.
Value 0 indicates that the DIS name is not …
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35
hwIsisCircPppNego
The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces:
none(0): indicates that the negotiation mode used to establish a neighbor relationship is not specified…
Enumerationr/w
Enumerated Values:
0none
1twoWay
2threeWay
3threeWayOnly
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36
hwIsisCircPppOsicpCheck
The value of this object identifies whether the OSICP check is required:
enable(1): enables the OSICP check.
disable(2): disables the OSICP check.
By default, the function is disabled.
This object applies to only P2P in…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37
hwIsisIntfRowStatus
The value of this object identifies the setting of two values:
createAndGo(4): creates one row.
destroy(6): deletes one row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38
hwIsisCircL1AuthKeychainName
The value of this object identifies the keychain name of Level-1 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that the authentication pas…
OctetStringr/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.39
hwIsisCircL2AuthKeychainName
The value of this object identifies the keychain name of Level-2 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that the authentication pas…
OctetStringr/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.40
hwIsisCircStrictSnpaCheckEnable
The value of this object identifies whether the snpa check of lsp and snp is required.
enable(1): enables the snpa check.
disable(2): disables the snpa check.
By default, the function is disabled.
This object applies to…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.41

hwIsisIntfExtTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.22 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisIntfExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisIntfExtTable' 
Set of some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type.
hwIsisIntfExtEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.22.1
Entry of Some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type.
Indexes
Column Syntax OID
hwIsisCircL1Cost
The value of this object identifies the Level-1 cost of an interface.
If the cost style is wide or widecompatible, the range of this value is from 0 to 16777215,
else the range of this value is from 0 to 63.
The value…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.1
hwIsisCircL2Cost
The value of this object identifies the Level-2 cost of an interface.
If the cost style is wide or widecompatible, the range of this value is from 0 to 16777215,
else the range of this value is from 0 to 63.
The value…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.2
hwIsisL1TagValue
The value of this object identifies the tag value of a Level-1 interface.
The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the set tag value is deleted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.3
hwIsisL2TagValue
The value of this object identifies the tag value of a Level-2 interface.
The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the set tag value is deleted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.4
hwIsisCircSuppReachablity
The value of this object identifies whether the advertisement of the interface address is suppressed:
Null(0): indicates that the interface address can be advertised.
level1(1): indicates that the advertisement of the L…
Enumerationr/w
Enumerated Values:
0null
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.5
hwIsisCircFrrBackup
The value of this object identifies whether an interface is enabled to become a backup interface in Loop Free Alternate (LFA) calculation.
Null(0): disables an interface from becoming a backup interface in LFA calculati…
Enumerationr/w
Enumerated Values:
0null
1level1
2level2
3level12
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.6
hwIsisCircMTRowStatus
This object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.7

hwIsisIntfBfdTable

table
.1.3.6.1.4.1.2011.5.25.24.2.1.23 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsisIntfBfdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ISIS-CONF-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ISIS-CONF-MIB::hwIsisIntfBfdTable' 
Set of BFD commands on interface of the Integrated IS-IS protocol existing on the system.
hwIsisIntfBfdEntry row .1.3.6.1.4.1.2011.5.25.24.2.1.23.1
Entry of BFD commands on interface of the Integrated IS-IS protocol existing on the system.
Indexes
Column Syntax OID
hwIsisCircBfdState
The value of this object identifies the BFD status:
enable(1): enables BFD.
disable(2): disables BFD.
static(3): configures static BFD.
block(4): blocks BFD on an interface.
By default, BFD is not enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
3static
4block
 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.1
hwIsisCircBfdMinTxInterval
The value of this object identifies the minimum interval for sending BFD packets.
The value range and default value of this object are determined by the license file.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.2
hwIsisCircBfdMinRxInterval
The value of this object identifies the minimum interval for sending BFD packets.
The value range and default value of this object are determined by the license file.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.3
hwIsisCircBfdMultiplier
The value of this object identifies the local BFD detection multiplier.
The value range and default value of this object are determined by the license file.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.4
hwIsisCircBfdFrrBinding
This object indicates that the BFD status is bound to IS-IS Auto FRR.
enable(1): indicates that BFD is bound to IS-IS Auto FRR.
disable(2): indicates that BFD is not bound to IS-IS Auto FRR.
By default, the BFD session …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.5