ation/alarm name: IP address conflict
2. Notification/alarm cause: A user IP address conflict occurs.
hwPoolGroupUsedIPReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.10
This object indicates the alarm generated when the address usage of the address pool group falls below 90% of the alarm threshold.
hwIPPoolConstantIndexFail
.1.3.6.1.4.1.2011.6.8.2.2.0.11
The constance index of ip pool recover failure.
hwIPv6PrefixConstantIndexFail
.1.3.6.1.4.1.2011.6.8.2.2.0.12
The constance index of ipv6 prefix pool recover failure.
hwIPv6PoolConstantIndexFail
.1.3.6.1.4.1.2011.6.8.2.2.0.13
The constance index of ipv6 pool recover failure.
hwUsedIPExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.14
The number of IP addresses in the IP pool is exhausted.
hwUsedIPExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.15
This object indicates that the number of IP addresses in use in an IP address pool falls below 90% of the total number of IP addresses in the address pool.
hwPoolGroupUsedIPExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.16
This object indicates the alarm generated when the addresses in an address pool group are exhausted.
hwPoolGroupUsedIPExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.17
This object indicates the alarm generated when the address usage of the address pool falls below 90%.
hwUsedIPv6AddressAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.18
This object indicates the alarm generated when the percentage of addresses in use to the total number of addresses in an IPv6 address pool exceeds the alarm threshold (80% by default).
hwUsedIPv6AddressAlarmResume
.1.3.6.1.4.1.2011.6.8.2.2.0.19
This object indicates the alarm generated when the IPv6 address usage falls below 90% of the alarm threshold.
hwUserIPLeaseAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.2
rap name: IP address lease alarm.
2 Notice/Trap generation cause: The user IP lease is over.
3 Repair suggestion:
Check whether to renew configuring BAS IP pool.
hwIPv6AddressExhaustAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.20
This object indicates the alarm generated when addresses in an IPv6 address pool are exhausted and no more IPv6 addresses can be allocated.
hwIPv6AddressExhaustAlarmResume
.1.3.6.1.4.1.2011.6.8.2.2.0.21
This object indicates the alarm generated when there are addresses in the IPv6 address pool available for allocation.
hwIPPoolDAPApplyUnsuccessful
.1.3.6.1.4.1.2011.6.8.2.2.0.22
t indicates that the BRAS applies to a RADIUS server for address segments in a dynamic address pool but fails.
The alarm is generated in the following scenarios:
1. The server fails to give a response.
2. The RADIUS server responds with a denial.
3. The RADIUS server responds that no addresses are assignable.
4. The addresses responded with by the RADIUS server are invalid.
5. The addresses responded with by the RADIUS server conflict with the addresses on the BRAS.
6. The address pool on the BRAS is full.
hwIPPoolDAPReleaseUnsuccessful
.1.3.6.1.4.1.2011.6.8.2.2.0.23
This object indicates that an address segment fails to be released (probably because the server does not exist).
hwIPPoolDAPSubnetFull
.1.3.6.1.4.1.2011.6.8.2.2.0.24
This object indicates that the number of address segments allocated to a dynamic address pool has reached 256.
hwIPPoolDAPDeviceSubnetFull
.1.3.6.1.4.1.2011.6.8.2.2.0.25
This object indicates that the number of address segments that are dynamically applies for has reached 4096.
hwUsedSubnetReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.26
The number of Subnets in the IP pool exceeds the threshold.
hwUsedSubnetThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.27
The number of Subnets in the IP pool is under the threshold.
hwPoolGroupUsedSubnetReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.28
The number of Subnets in the IP pool group exceeds the threshold.
hwPoolGroupUsedSubnetReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.29
The number of Subnets in the IP pool group is under the threshold.
hwAllocUserIPFailAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.3
This object indicates the alarm generated when IP address allocation fails.
hwUsedSubnetExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.30
The number of Subnets in the IP pool is exhausted.
hwUsedSubnetExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.31
The number of Subnets in the IP pool is under the exhaust.
hwPoolGroupUsedSubnetExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.32
The number of Subnets in the IP pool group is exhausted.
hwPoolGroupUsedSubnetExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.33
The number of Subnets in the IP pool group is under the exhaust.
hwIPPoolAutoBlocked
.1.3.6.1.4.1.2011.6.8.2.2.0.34
The address pool was automatically locked due to address allocation failures.
hwIPPoolAutoBlockedResume
.1.3.6.1.4.1.2011.6.8.2.2.0.35
The automatically locked address pool was unlocked.
hwDapServerIPPoolUsedSubnetReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.36
The number of Subnets in the IP pool exceeds the threshold.
hwDapServerIPPoolUsedSubnetReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.37
The number of Subnets in the IP pool is under the threshold.
hwDapServerIPPoolUsedSubnetExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.38
The number of Subnets in the IP pool is exhausted.
hwDapServerIPPoolUsedSubnetExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.39
The number of Subnets in the IP pool is under the exhaust.
hwDhcpServerDown
.1.3.6.1.4.1.2011.6.8.2.2.0.4
This object indicates the alarm generated when the DHCP server goes Down.
hwDapServerIPv6PoolUsedPrefixReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.40
The number of Prefix in the IP pool exceeds the threshold.
hwDapServerIPv6PoolUsedPrefixReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.41
The number of Prefix in the IP pool is under the threshold.
hwDapServerIPv6PoolUsedPrefixExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.42
The number of Prefix in the IP pool is exhausted.
hwDapServerIPv6PoolUsedPrefixExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.43
The number of Prefix in the IP pool is under the exhaust.
hwIPv6PoolDAPApplyUnsuccessful
.1.3.6.1.4.1.2011.6.8.2.2.0.44
Apply the prefix unsuccessful.
hwIPv6PoolDAPReleaseUnsuccessful
.1.3.6.1.4.1.2011.6.8.2.2.0.45
Release an prefix unsuccessful.
hwIPv6PoolDAPPrefixFull
.1.3.6.1.4.1.2011.6.8.2.2.0.46
The number of prefix dynamically allocated to the device reached the upper limit allowed by the dynamic prefix pool.
hwIPv6PoolDAPDevicePrefixFull
.1.3.6.1.4.1.2011.6.8.2.2.0.47
The number of prefix dynamically allocated to the device reached the maximum number allowed.
hwIPPoolIsolatedCauseMainboardReset
.1.3.6.1.4.1.2011.6.8.2.2.0.48
The master main control board restarted after the address pool was isolated.
hwVPNIPPoolUsageReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.49
The IP address usage of the vpn reached the threshold.
hwLocalIPPoolDifferWithServer
.1.3.6.1.4.1.2011.6.8.2.2.0.5
This object indicates the alarm generated when the address pool gateway allocated by the DHCP server is different from the one configured locally.
hwVPNIPPoolUsageReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.50
The IP address usage of the vpn fell below the threshold.
hwVPNIPv6PoolUsageReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.51
The IPv6 address usage of the vpn reached the threshold.
hwVPNIPv6PoolUsageReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.52
The IPv6 address usage of the vpn fell below the threshold.
hwCUPoolGroupUsedIPReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.53
of used IP addresses in the IP pool group exceeds the threshold.
Repair suggestion: Check the configuration of the IP address pool group.
hwCUPoolGroupUsedIPReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.54
The number of used IP addresses in the IP pool group is under the threshold.
hwCUPoolGroupUsedIPExhaust
.1.3.6.1.4.1.2011.6.8.2.2.0.55
The number of IP addresses in the IP pool group is exhausted.
hwCUPoolGroupUsedIPExhaustResume
.1.3.6.1.4.1.2011.6.8.2.2.0.56
The number of IP addresses in the IP pool group is under the exhaust.
hwDhcpv6ServerDown
.1.3.6.1.4.1.2011.6.8.2.2.0.57
This object indicates the alarm generated when the DHCPv6 server goes Down.
hwIPPoolDAPDeviceSubnetFullAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.58
The number of address segments dynamically allocated to the device reached the maximum number allowed.
hwIPPoolDAPDeviceSubnetFullAlarmResume
.1.3.6.1.4.1.2011.6.8.2.2.0.59
The number of address segments dynamically allocated to the device falls below 90% of the maximum number allowed.
hwUsedIPReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.6
t indicates that the usage of the IP address pool exceeds the upper alarm threshold.
Solution: Check configurations of the IP address pool.
hwIPv6PoolDAPDevicePrefixFullAlarm
.1.3.6.1.4.1.2011.6.8.2.2.0.60
The number of prefix dynamically allocated to the device reached the maximum number allowed.
hwIPv6PoolDAPDevicePrefixFullAlarmResume
.1.3.6.1.4.1.2011.6.8.2.2.0.61
The number of prefix dynamically allocated to the device falls below 90% of the maximum number allowed.
hwBasUnrImportRouteReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.62
The number of BRAS UNR VPN import route exceeded the maximum value.
hwBasUnrImportRouteReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.63
The number of BRAS UNR VPN import route fell below the maximum value.
hwUsedIPReachThresholdResume
.1.3.6.1.4.1.2011.6.8.2.2.0.7
This object indicates that the usage of the IP address pool falls below the lower alarm threshold.
hwUsedDeleteUnnumberedRouter
.1.3.6.1.4.1.2011.6.8.2.2.0.8
This object indicates the alarm generated when the gateway unnumbered interface bound in the address pool is deleted through board removal and reinstallation.
hwPoolGroupUsedIPReachThreshold
.1.3.6.1.4.1.2011.6.8.2.2.0.9
This object indicates the alarm generated when the address usage of the address pool group reaches the alarm threshold.
hwIppool 
hwIPPoolTable 
hwIPPoolEntry 
hwIPPoolIndex 
hwIpv6PoolNum 
hwUserIPConflictAlarm