HUAWEI-IPPOOL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
32
Rows
32
Columns
312

hwIPPoolTable

table
.1.3.6.1.4.1.2011.6.8.1.1 · 1 row entry · 30 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolTable' 
hwIPPoolTable is used to configure information about an address pool.
hwIPPoolEntry row .1.3.6.1.4.1.2011.6.8.1.1.1
The configuration list of IP address pool, which is used to configure the relevant attributes of the IP address pool inside the device.
Indexes
Column Syntax OID
hwIPPoolIndex
This object indicates the unique index of the IP address pool.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.1.1.1
hwIPPoolName
IP address pool name, the service module guarantees the exclusiveness of the name.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.1.1.2
hwIPPoolRouterIPAddr
Gateway IP address.
By default, the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.3
hwIPPoolRouterIPMask
Gateway mask.
By default, the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.4
hwIPPoolPriDNSIPAddr
Primary DNS IP address.
By default, it is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.5
hwIPPoolSecDNSIPAddr
Second DNS IP address.
By default, it is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.6
hwIPPoolPriNBNSIPAddr
Primary Netbios IP address.
By default, it is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.7
hwIPPoolSecNBNSIPAddr
Second Netbios IP address.
By default, it is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.8
hwIPPoolIPAddrLease
IP address lease: 0~(1000*24*60-1)(m) unit: minute. It is allowed not to specify the lease during the adding. The default value is 3*24*60(m).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.9
hwIPPoolStatus
Row admin status, either Add or Delete.
Supports adding and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.1.1.10
hwIPPoolVPNInstance
IP VPN-instance name.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.1.1.11
hwIPPoolType
Value indicates the type of pool, 1-local, 2-relay, 3-server, 4-localRuiSlave.
Enumerationr/w
Enumerated Values:
1local
2relay
3server
4localRuiSlave
 .1.3.6.1.4.1.2011.6.8.1.1.1.12
hwIPPoolNetwork
Network ip address of a DHCP Server global pool.
To delete a configured network ip, please set
hwDHCPSGlobalPoolConfigUndoFlag to 1
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.13
hwIPPoolNetworkMask
Net mask of a DHCP Server global pool(network).
The SET operation to this object ought to be with
the SET of hwDHCPSGlobalPoolNetwork together, and
any SET operation alone to this object will be
regarded as an invalid o…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.14
hwIPPoolIPTotalNum
This object indicates the total number of IP addresses.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.15
hwIPPoolIPUsedNum
This object indicates the number of IP addresses in use.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.16
hwIPPoolIPConflictNum
This object indicates the number of conflicting IP addresses that are not in use.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.17
hwIPPoolIPExcludeNum
This object indicates the number of IP addresses that cannot be allocated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.18
hwIPPoolIPIdleNum
This object indicates the number of idle addresses.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.19
hwIPPoolIPUsedPercent
used percent.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.8.1.1.1.20
hwIPPoolDNSIPAddrString
String of DNS server ip addresses for DHCP clients.
Since mostly 8 ip addresses can be configured for a pool
totally, a string is defined to get or configure 8
ip addresses at a time
OctetStringr/w
Constraints:
range: 0-129
 .1.3.6.1.4.1.2011.6.8.1.1.1.21
hwIPPoolDNSIPAddrStringUndo
A DNS server ip address to be deleted. This object
is only for deleting a given ip address of DNS server.
OctetStringr/w
Constraints:
range: 0-129
 .1.3.6.1.4.1.2011.6.8.1.1.1.22
hwIPPoolNBNSIPAddrString
String of NetBIOS server ip addresses for DHCP
clients. Since mostly 8 ip addresses can be configured for
a pool totally, so a string is defined to get or
configure 8 ip addresses at a time
OctetStringr/w
Constraints:
range: 0-129
 .1.3.6.1.4.1.2011.6.8.1.1.1.23
hwIPPoolNBNSIPAddrStringUndo
A NetBIOS server ip address to delete. This
object is only for deleting a given ip address of NetBIOS
server
OctetStringr/w
Constraints:
range: 0-129
 .1.3.6.1.4.1.2011.6.8.1.1.1.24
hwIPPoolRouterUnnumberedIfName
unnumbered interface name.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.8.1.1.1.25
hwIPPoolConflictAutoRecycleInterval
The flag indicates whether funtion of conflict auto recycle is enabled.
Integer32r/w
Constraints:
range: 0-0
range: 30-1440
 .1.3.6.1.4.1.2011.6.8.1.1.1.26
hwIPPoolLowAddr
The lowest IP address in the pool.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.27
hwIPPoolHighAddr
The highest IP address in the pool.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.1.1.28
hwIPPoolReqNum
The number of the request packet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.29
hwIPPoolReqSucNum
The number of the effective request packet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.1.1.30

hwIPSectionTable

table
.1.3.6.1.4.1.2011.6.8.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPSectionTable' 
The configuration table of IP section.
hwIPSectionEntry row .1.3.6.1.4.1.2011.6.8.1.2.1
IPSection Entry.
IP section configuration table, used to manage the IP address of user.
There are at most eight address sections to each address pool. Its indexes are hwIPPoolIndex (from the external) and HwIPSectionI…
Indexes
Column Syntax OID
hwIPSectionIndex
This object indicates the address segment index.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.2.1.1
hwIPSectionDesc
IP section DESCRIPTION, which can be empty.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.2.1.2
hwIPSectionLowAddr
This object indicates the start IP address of the address pool.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.2.1.3
hwIPSectionHighAddr
This object indicates the end IP address in the address segment.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.2.1.4
hwIPSectionLength
This object indicates the address segment length.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.6.8.1.2.1.5
hwIPSectionUsedNum
This object indicates the number of IP addresses that have been allocated.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.6.8.1.2.1.6
hwIPSectionConflict
The number of conflict addresses.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.6.8.1.2.1.7
hwIPSectionInvalid
This object indicates the number of invalid IP addresses.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.6.8.1.2.1.8
hwIPSectionAvailableNum
This object indicates the number of idle addresses.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.6.8.1.2.1.9
hwIPSectionRowStatus
This object indicates the status of an address segment. Currently, the status of the address pool can be added (4) or deleted (6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.2.1.10

hwIPPoolExtTable

table
.1.3.6.1.4.1.2011.6.8.1.3 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolExtTable' 
Extend table of the local address pool.
When IP addresses are allocated by the built-in DHCP servers, you need to configure the lease and option.
hwIPPoolExtEntry row .1.3.6.1.4.1.2011.6.8.1.3.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPPoolAvailableStatus
Whether the address is prohibited.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.6.8.1.3.1.1
hwIPDhcpOptionId1
Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32r/w
Constraints:
range: 128-255
 .1.3.6.1.4.1.2011.6.8.1.3.1.2
hwIPDhcpOption1
Value of the option.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.8.1.3.1.3
hwIPDhcpOptionId2
Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32r/w
Constraints:
range: 128-255
 .1.3.6.1.4.1.2011.6.8.1.3.1.4
hwIPDhcpOption2
Value of the option.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.8.1.3.1.5
hwIPDhcpOptionId3
Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32r/w
Constraints:
range: 128-255
 .1.3.6.1.4.1.2011.6.8.1.3.1.6
hwIPDhcpOption3
Value of the option.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.8.1.3.1.7
hwIPDhcpOptionId4
Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32r/w
Constraints:
range: 128-255
 .1.3.6.1.4.1.2011.6.8.1.3.1.8
hwIPDhcpOption4
Value of the option.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.8.1.3.1.9
hwIPDnsSuffix
DNS suffix, a string of 0-50 characters.
If the value is 0, it indicates that the suffix is deleted.
OctetStringr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.8.1.3.1.10
hwIPDhcpSvrIPRsv
mode of IP addresses reserving. 1 indicates leasing management, 2 indicates MAC binding, and other values are invalid.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.3.1.11
hwIPPoolIpAddrRenewal
ip address renewal: 0~(1000*24*60-1)*60(s) unit: second. It is allowed not to specify the renewal during the adding. The default value is 129600(s)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.3.1.12
hwIPPoolIpAddrRebinding
ip address rebinding: 0~(1000*24*60-1)*60(s) unit: second. It is allowed not to specify the rebinding during the adding. The default value is 226800(s)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.3.1.13
hwIPPoolSIPAddr1
SIP Server IP address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.3.1.14
hwIPPoolSIPAddr2
SIP Server IP address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.3.1.15
hwIPPoolSIPName1
The name of SIP server. 0 indicates to delete the SIP server.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.8.1.3.1.16
hwIPPoolSIPName2
The name of SIP server. 0 indicates to delete the SIP server.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.8.1.3.1.17

hwIPAddressStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPAddressStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPAddressStatusTable' 
Address status table.
It supports the query and setting of status of the local address pool. 
It does not support the query and setting of status of the remote address pool for the following reasons:
 1. The status of the remote address pool cannot be set.
 2. The remote and local address pools map different status tables, with different indexes.
 3. The remote address pool is managed by the remote equipment, rather than the local equipment. The local equipment displays only the approximate status of the remote address pool.
hwIPAddressStatusEntry row .1.3.6.1.4.1.2011.6.8.1.4.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPAddress
IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.4.1.1
hwIPAddressStatus
Status of the address.
Enumerationr/w
Enumerated Values:
0idle
1occupied
2prohibitive
3conflictive
 .1.3.6.1.4.1.2011.6.8.1.4.1.2
hwPoolName
IP address pool name.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.4.1.3

hwDhcpSvrGroupTable

table
.1.3.6.1.4.1.2011.6.8.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpSvrGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDhcpSvrGroupTable' 
Configuration table of the DHCP server group.
To monitor the status of the remote DHCP server, you need to configure the local DHCP server.
You can configure a maximum of 4094 DHCP server groups.
Each server group consists of two DHCP servers. Select the server based on the server status.
hwDhcpSvrGroupEntry row .1.3.6.1.4.1.2011.6.8.1.5.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPPoolDhcpSvrGroupIndex
Index of a DHCP server group.
When you create an address pool, the equipment adds the hwIPPoolDhcpSvrGroupIndex entry by default and sends it to the NMS.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.5.1.1
hwIPPoolDhcpSvrGroupName
Name of the DHCP server group.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.5.1.2
hwIPDhcpSvrPriAddr
Primary IP address of the DHCP server group.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.5.1.3
hwIPDhcpSvrScdiAddr
Secondary IP address of the DHCP server group.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.5.1.4
hwIPDhcpSvrPriState
Status of the primary DHCP server.
Enumeration
Enumerated Values:
0stop
1use
 .1.3.6.1.4.1.2011.6.8.1.5.1.5
hwIPDhcpScdPriState
Status of the secondary DHCP server.
Enumeration
Enumerated Values:
0stop
1use
 .1.3.6.1.4.1.2011.6.8.1.5.1.6
hwIPDhcpSvrAutoRelease
Whether the server supports the Release packet.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.5.1.7
hwIPDhcpSvrRefCount
Number of times the server group is referenced.
Integer32
Constraints:
range: 0-16384
 .1.3.6.1.4.1.2011.6.8.1.5.1.8
hwIPDhcpSvrRowStatus
DHCP server row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.5.1.9
hwIPDhcpSvrPriVpnInstance
VPN instance of the primary DHCP server.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.5.1.10
hwIPDhcpSvrScdVpnInstance
VPN instance of the secondary DHCP server.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.5.1.11
hwIPDhcpSvrSouce
DHCP source interface address.
OctetStringr/w
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.6.8.1.5.1.12

hwRemotePoolTable

table
.1.3.6.1.4.1.2011.6.8.1.6 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRemotePoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwRemotePoolTable' 
Configuration table of the remote address pool.
The remote address pool must be configured on the local equipment in the following cases:
  Users obtain IP addresses through the built-in DHCP client and need to renew the addresses.
  The equipment needs to record the IP addresses to be renewed.
  The equipment needs to report the routes of the users.
hwRemotePoolEntry row .1.3.6.1.4.1.2011.6.8.1.6.1
DESCRIPTION.
Indexes
Column Syntax OID
hwRemoteIPPoolIndex
Index of an address pool.
When you create an address pool, the equipment adds the hwRemoteIPPoolIndex x entry by default and sends it the NMS.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.6.1.1
hwRemoteIPPoolName
Name of an address pool.
The service module ensures that the name is unique.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.6.1.2
hwRemoteIPPoolRouterIPAddr
IP address of the gateway.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.3
hwRemoteIPPoolRouterIPMask
IP address mask.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.4
hwRemoteIPPoolDhcpSvrGroupID
Name of the associated DHCP server group.
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.6.8.1.6.1.5
hwRemoteIPPoolAvailableStatus
Whether the address pool is locked, 0: locked, 1: not locked.
Enumerationr/w
Enumerated Values:
0locked
1unlocked
 .1.3.6.1.4.1.2011.6.8.1.6.1.6
hwRemoteIPPoolRowStatus
Row status of IP pool.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.6.1.7
hwRemoteIPPoolPriDNSIPAddress
IP address of the active DNS server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.8
hwRemoteIPPoolSecDNSIPAddress
IP address of the standby DNS server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.9
hwRemoteIPPoolPriNBNSIPAddress
IP address of the active NBNS server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.10
hwRemoteIPPoolSecNBNSIPAddress
IP address of the standby NBNS server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.6.1.11
hwRemoteIPPoolVPNInstance
IP VPN-instance name.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.6.1.12
hwRemoteIPPoolDhcpGroupName
DHCP server group name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.6.1.13
hwRemoteIPPoolLeaseManageEnable
Whether the address pool lease manage is enable, 0: diable, 1: enable.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.6.8.1.6.1.14
hwRemoteIPPoolWeight
The weight of this Remote IP pool.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.8.1.6.1.15
hwRemoteIPPoolIPTotalNum
This object indicates the total number of IP addresses of remote ip address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.6.1.16
hwRemoteIPPoolIPUsedNum
This object indicates the used number of IP addresses of remtoe ip address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.6.1.17

hwDhcpServerTable

table
.1.3.6.1.4.1.2011.6.8.1.8 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDhcpServerTable' 
DHCP server configuration table.
hwDhcpServerEntry row .1.3.6.1.4.1.2011.6.8.1.8.1
Description.
Indexes
Column Syntax OID
hwDhcpServerIndex
The index of DHCP server.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.8.1.1
hwIPPoolDhcpServerIP
The IP address of DHCP server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.8.1.2
hwIPPoolDhcpServerVRFName
The name of VPN instance for the master DHCP server.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.8.1.3
hwIPPoolDhcpServerState
The state of DHCP server.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.6.8.1.8.1.4
hwIPPoolDhcpServerSendDisvSpdNum
The send discovering speed number.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.8.1.8.1.5
hwIPPoolDhcpServerSendDisvSpdSec
The interval of discovery packets sent by DHCP server.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.8.1.6
hwIPPoolDhcpServerDeadCount
The threshold of no response packets from DHCP server, when the number count over the threshold, DHCP server is changed from up to down status.
The default value is 0.
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.8.1.8.1.7
hwIPPoolDhcpServerNakCount
The threshold of nak packets from DHCP server, when nak packets count over the threshold, DHCP server is changed from up to down status.
The default value is 10.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.8.1.8
hwIPPoolDhcpServerTimeout
The timeout interval for response packet,the time unit is second and default value is 25 seconds.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.6.8.1.8.1.9
hwIPPoolDhcpServerDeadTime
The interval of DHCP server automatically recover up status, the time unit is minute and default value is 3 minutes.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.8.1.8.1.10

hwIPPoolOptionTable

table
.1.3.6.1.4.1.2011.6.8.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolOptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolOptionTable' 
A table for configuring options to DHCP server pools,
include option code type and value and so on .
hwIPPoolOptionEntry row .1.3.6.1.4.1.2011.6.8.1.9.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPDhcpOptionId
Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32
Constraints:
range: 2-254
 .1.3.6.1.4.1.2011.6.8.1.9.1.1
hwIPDhcpOption
Value of the option.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.9.1.2
hwIPDhcpOptionRowStatus
This object is used to configuration new rows in this
table, modify existing rows, and to delete
existing rows.Only three actions are used: active(1),
createAndGo(4), destroy(6).
while configuration new option, you must…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.9.1.3

hwIPPoolGroupTable

table
.1.3.6.1.4.1.2011.6.8.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolGroupTable' 
Configuration table of the address Pool Group.
IP Pool Group support an aggregation of IP Pools. Many Ip Pools of different gateway can be referenced by IP Pool Group.
The max number of IP Pools referenced by an Ip Pool Group is 1024
hwIPPoolGroupEntry row .1.3.6.1.4.1.2011.6.8.1.10.1
The configuration list of IP address pool group, which is used to configure the relevant attributes of the IP address pool group inside the device.
Indexes
Column Syntax OID
hwIPPoolGroupName
Name of an IP Pool Group.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.10.1.1
hwIPPoolGroupVPNInstance
Vpn instance of an address Pool Group.
Vpn instance of All IP Pools must accord with the vpn instance of IP Pool Group.
Use string '--' to undo vpn instance in Pool Group.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.10.1.2
hwIPPoolGroupIncludeUndo
Whether dereference all IP Pools in Pool Group.
Only support dereference all IP Pools in this operation. If dereference Pool one by one is needed, please use IPPoolGroupExtTable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.10.1.3
hwIPPoolGroupRowStatus
Row status of IP Pool Group.
Support Active, CreateAndGo and Destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.10.1.4

hwIPPoolGroupExtTable

table
.1.3.6.1.4.1.2011.6.8.1.11 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolGroupExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolGroupExtTable' 
Configuration extension table of the address pool group.
The extension table can set the order of an IP pool in IP Pool Group.
The extension table can be used to dereference an IP pool in IP pool Group.
hwIPPoolGroupExtEntry row .1.3.6.1.4.1.2011.6.8.1.11.1
The configuration list of IP address pool group extension table.
Indexes
Column Syntax OID
hwIPPoolGroupExtIncludePoolName
The IP Pool referenced in IP Pool Group.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.11.1.1
hwIPPoolGroupExtIncludePoolMoveOrder
The order of IP Pool in IP Pool Group.
Specify the move order to adjust the order of the IP Pool in IP Pool Group.
Only supoort set operation.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2011.6.8.1.11.1.2
hwIPPoolGroupExtRowStatus
Row status of IP pool group extension.
Support CreateAndGo and Destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.11.1.3

hwIPPoolGroupDisplayTable

table
.1.3.6.1.4.1.2011.6.8.1.12 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolGroupDisplayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolGroupDisplayTable' 
Display table of the address pool group.
hwIPPoolGroupDisplayEntry row .1.3.6.1.4.1.2011.6.8.1.12.1
The configuration list of IP address pool display group table.
Indexes
Column Syntax OID
hwIPPoolGroupIncludePoolNum
This object indicates the number of address pools referenced in the address pool group.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.8.1.12.1.1
hwIPPoolGroupBoundByDomainNum
This object indicates the number of address pool groups referenced by domains.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.8.1.12.1.2
hwIPPoolGroupIPTotalNum
This object indicates the total number of addresses in the address pool group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.3
hwIPPoolGroupIPUsedNum
The Used number of IP in IP Pool Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.4
hwIPPoolGroupIPConflictedNum
The Conflicted number of IP in IP Pool Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.5
hwIPPoolGroupIPDisableNum
The Disable number of IP in IP Pool Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.6
hwIPPoolGroupIPDesignatedNum
The Designated number of IP in IP Pool Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.7
hwIPPoolGroupIPFreeNum
The Free number of IP in IP Pool Group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.12.1.8
hwIPPoolGroupIPUsedPercent
The Used Percent of IP in IP Pool Group.
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.8.1.12.1.9

hwIPPoolDomainSearchListTable

table
.1.3.6.1.4.1.2011.6.8.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolDomainSearchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolDomainSearchListTable' 
Set the domain search list which is uesed to fill content of DHCP packet option 119.
The option is passed from the DHCP Server to the DHCP Client to specify the domain 
search list used when resolving hostnames using DNS.
hwIPPoolDomainSearchListEntry row .1.3.6.1.4.1.2011.6.8.1.13.1
The configuration list of IP address pool DomainSearchList table.
Indexes
Column Syntax OID
hwIPPoolDomainSearchList
The domain search list which is used to fill content of DHCP packet option 119.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.13.1.1
hwIPPoolDomainSearchListRowStatus
Row status of IP pool DomainSearchList.
Support CreateAndGo and Destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.13.1.2

hwIPPoolOptionExtTable

table
.1.3.6.1.4.1.2011.6.8.1.14 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolOptionExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolOptionExtTable' 
A Ext table for configuring options to DHCP server pools,
include option code type and value and so on .
hwIPPoolOptionExtEntry row .1.3.6.1.4.1.2011.6.8.1.14.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPDhcpOptionSubId
Sub Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter, which needs to be defined and explained by the carrier.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.2011.6.8.1.14.1.1
hwIPDhcpOptionSubType
Value indicates the type of sub-option, 1-ip, 2-string.
Enumerationr/w
Enumerated Values:
1ip
2string
 .1.3.6.1.4.1.2011.6.8.1.14.1.2
hwIPDhcpOptionSubValue
Value of the sub-option.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.8.1.14.1.3
hwIPDhcpOptionSubRowStatus
This object is used to configuration new rows in this
table, modify existing rows, and to delete
existing rows.Only three actions are used: active(1),
createAndGo(4), destroy(6).
while configuration new suboption, you m…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.14.1.50

hwIPPoolReplyOptionTable

table
.1.3.6.1.4.1.2011.6.8.1.15 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolReplyOptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolReplyOptionTable' 
A table for configuring options which will be replied to client 
in according to specified option value of DHCP client request
hwIPPoolReplyOptionEntry row .1.3.6.1.4.1.2011.6.8.1.15.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPDhcpSpecOptionId
Option ID.
Option code from DHCP request of client.
Integer32
Constraints:
range: 60-60
 .1.3.6.1.4.1.2011.6.8.1.15.1.1
hwIPDhcpSpecOption
Option ID.
Option code from DHCP request of client.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.8.1.15.1.2
hwIPDhcpReplyOptionId
This object is used to configuration option code which is needed to
reply to client according to specified option value in DHCP request,
Option code, from 2 to 254, include 2 and 254, exclude
3,6,15,44,46,50-54,57-60…
Integer32
Constraints:
range: 2-254
 .1.3.6.1.4.1.2011.6.8.1.15.1.3
hwIPDhcpReplyOptionSubId
Sub Option ID.
When IP addresses are allocated by the built-in DHCP server, the option is a configuration parameter,
which needs to be defined and explained by the carrier.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.2011.6.8.1.15.1.4
hwIPDhcpReplyOptionSubType
Value indicates the type of sub-option, 1-ip, 2-string, 3-hex.
Enumerationr/w
Enumerated Values:
1ip
2string
3hex
 .1.3.6.1.4.1.2011.6.8.1.15.1.5
hwIPDhcpReplyOptionSub
Value of the sub-option.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.15.1.6
hwIPDhcpReplyOptionRowStatus
This object is used to configuration new rows in this
table, modify existing rows, and to delete
existing rows.Only three actions are used: active(1),
createAndGo(4), destroy(6).
while configuration new option, you must…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.15.1.50

hwIPv6PrefixTable

table
.1.3.6.1.4.1.2011.6.8.1.16 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6PrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6PrefixTable' 
The configuration table of IPv6 prefix pool.
hwIPv6PrefixEntry row .1.3.6.1.4.1.2011.6.8.1.16.1
The configuration list of IPv6 prefix pool.
Indexes
Column Syntax OID
hwIPv6PrefixIndex
The index of IPv6 prefix pool.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.16.1.1
hwIPv6PrefixName
The name of IPv6 prefix pool
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.16.1.2
hwIPv6PrefixType
The type of IPv6 prefix pool.
Enumerationr/w
Enumerated Values:
1local
2delegation
3remote
 .1.3.6.1.4.1.2011.6.8.1.16.1.3
hwIPv6Prefix
The prefix of IPv6 prefix pool. This node is valid only for local and delegation prefix pool.
IPV6-TCIpv6AddressPrefixr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.2011.6.8.1.16.1.4
hwIPv6PrefixLen
The prefix length of IPv6 prefix pool. Note that 0 is not a configurable value.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.8.1.16.1.5
hwIPv6PrefixDelegatingLen
The delegating prefix length of IPv6 prefix pool. Note that 0 is not a configurable value. This node is valid only for local and delegation prefix pool.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.8.1.16.1.6
hwIPv6PrefixAdvPreferredLifetime
The preferred lifetime(seconds) of IPv6 prefix pool.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.16.1.7
hwIPv6PrefixAdvValidLifetime
The valid lifetime(seconds) of the IPv6 prefix.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.16.1.8
hwIPv6PrefixAvailableStatus
The flag indicating whether the IPv6 prefix pool is locked.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.16.1.9
hwIPv6VPNInstance
The vpn instance name of the IPv6 prefix pool.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.16.1.10
hwIPv6PrefixReservedFlag
The reserved flag of the IPv6 prefix pool. 0-none reserved, 1-mac reserved, 2-mac plus lease reserved, 3-duid reserved, 4-duid plus lease reserved.
Enumerationr/w
Enumerated Values:
0noneReserved
1macReserved
2macPlusLeaseReserved
3duidReserved
4duidPlusLeaseReserved
 .1.3.6.1.4.1.2011.6.8.1.16.1.11
hwIPv6LinkAddress
The link address of the IPv6 remote prefix pool. This node is valid only for remote prefix pool.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.8.1.16.1.12
hwIPv6SlaacUnsharedFlag
The flag indicates whether prefix pool is used in unshared-mode. The node is valid only for delegation prefix pool.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.16.1.13
hwIPv6PrefixRowStatus
Row admin status. Support adding, modification and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.16.1.14
hwIPPoolPDUnshareOnly
The flag indicates whether the prefix pool only for DHCPv6 IA_PD. The node is valid only for delegation prefix pool.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.16.1.15

hwIPv6PoolTable

table
.1.3.6.1.4.1.2011.6.8.1.17 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6PoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6PoolTable' 
The configuration table of IPv6 address pool.
hwIPv6PoolEntry row .1.3.6.1.4.1.2011.6.8.1.17.1
The configuration list of IPv6 address pool.
Indexes
Column Syntax OID
hwIPv6PoolIndex
The index of IPv6 addres pool.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.17.1.1
hwIPv6PoolName
The name of IPv6 addres pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.17.1.2
hwIPv6PoolType
The type of IPv6 addres pool.
Enumerationr/w
Enumerated Values:
1local
2delegation
3relay
 .1.3.6.1.4.1.2011.6.8.1.17.1.3
hwIPv6PoolPrefixName
The prefix pool name of IPv6 addres pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.17.1.4
hwIPv6PoolDnsIPAddr
The DNS of IPv6 addres pool. The format to set value is : operator+space+primary DNS+space+secondary DNS. operator: 1-Add, 2-Delete.
OctetStringr/w
Constraints:
range: 1-81
 .1.3.6.1.4.1.2011.6.8.1.17.1.5
hwIPv6PoolDnsSearchList
The DNS search list of IPv6 addres pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.17.1.6
hwIPv6PoolPreference
The preference of IPv6 addres pool.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.8.1.17.1.7
hwIPv6PoolAvailableStatus
The flag indicating whether IPv6 address pool is locked.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.17.1.8
hwIPv6PoolRenewPercent
The renew time percent of IPv6 addres pool. When hwIPv6PoolRenewPercent is specified, you need also specify hwIPv6PoolRebindingPercent.
Integer32r/w
Constraints:
range: 10-99
 .1.3.6.1.4.1.2011.6.8.1.17.1.9
hwIPv6PoolRebindingPercent
The rebinding time percent of IPv6 addres pool. When hwIPv6PoolRebindingPercent is specified, you need also specify hwIPv6PoolRenewPercent.
Integer32r/w
Constraints:
range: 10-99
 .1.3.6.1.4.1.2011.6.8.1.17.1.10
hwIPv6PoolRapidCommitFlag
The flag indicating whether DHCPv6 rapid-commit is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.17.1.11
hwIPv6PoolUnicastOption
The flag indicating whether DHCPv6 server unicast option is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.17.1.12
hwIPv6PoolAFTRName
Configure the name of Address Family Transition Router.
OctetStringr/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.2011.6.8.1.17.1.13
hwIPv6PoolRowStatus
Row admin status. Support adding, modification and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.17.1.14

hwIPv6PoolStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.18 · 1 row entry · 23 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6PoolStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6PoolStatusTable' 
The configuration table of IPv6 address pool's usage.
hwIPv6PoolStatusEntry row .1.3.6.1.4.1.2011.6.8.1.18.1
The configuration list of IPv6 address pool's usage.
Indexes
Column Syntax OID
hwIPv6FreeAddressNum
This object indicates the number of idle addresses in the address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.1
hwIPv6UsedAddressNum
This object indicates the number of addresses in use in the address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.2
hwIPv6FreePrefixNum
This object indicates the number of idle prefixes in the address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.3
hwIPv6UsedPrefixNum
This object indicates the number of prefixes in use in the address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.4
hwIPv6AddressTotalNum
This object indicates the number of IPv6 addresses in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.5
hwIPv6AddressUsedNum
This object indicates the number of IPv6 addresses in use in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.6
hwIPv6AddressFreeNum
This object indicates the number of idle IPv6 addresses in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.7
hwIPv6AddressConflictNum
This object indicates the number of conflicting IPv6 addresses in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.8
hwIPv6AddressExcludeNum
This object indicates the number of IPv6 addresses that cannot be used in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.9
hwIPv6AddressUsedPercent
This object indicates the IPv6 address usage of the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.10
hwIPv6NDRAPrefixTotalNum
This object indicates the number of NDRA prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.11
hwIPv6NDRAPrefixUsedNum
This object indicates the number of NDRA prefixes in use in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.12
hwIPv6NDRAPrefixFreeNum
This object indicates the number of idle NDRA prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.13
hwIPv6NDRAPrefixConflictNum
This object indicates the number of conflicting NDRA prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.14
hwIPv6NDRAPrefixExcludeNum
This object indicates the number of NDRA prefixes that cannot be used in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.15
hwIPv6NDRAPrefixUsedPercent
This object indicates the IPv6 NDRA prefix usage of the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.16
hwIPv6PDPrefixTotalNum
This object indicates the number of PD prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.17
hwIPv6PDPrefixUsedNum
This object indicates the number of PD prefixes in use in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.18
hwIPv6PDPrefixFreeNum
This object indicates the number of idle PD prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.19
hwIPv6PDPrefixConflictNum
This object indicates the number of conflicting PD prefixes in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.20
hwIPv6PDPrefixExcludeNum
This object indicates the number of PD prefixes that cannot be used in the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.21
hwIPv6PDPrefixUsedPercent
This object indicates the IPv6 PD prefix usage of the IPv6 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.18.1.22
hwV6PoolName
IPv6 address pool name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.18.1.23

hwIPv6DuidBindPrefixTable

table
.1.3.6.1.4.1.2011.6.8.1.19 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6DuidBindPrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6DuidBindPrefixTable' 
The binding of client DUID and prefix.
hwIPv6DuidBindPrefixEntry row .1.3.6.1.4.1.2011.6.8.1.19.1
The binding of client's DUID and prefix.
Indexes
Column Syntax OID
hwIPv6ClientDuid
The client duid.
OctetStringr/w
Constraints:
range: 8-28
 .1.3.6.1.4.1.2011.6.8.1.19.1.1
hwIPv6BindPrefix
The binding prefix of client.
IPV6-TCIpv6AddressPrefixr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.2011.6.8.1.19.1.2
hwIPv6DuidBindPrefixRowStatus
Row admin status. Support adding and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.19.1.3

hwDhcpv6SvrGroupTable

table
.1.3.6.1.4.1.2011.6.8.1.20 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpv6SvrGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDhcpv6SvrGroupTable' 
The configuration table of the DHCPv6 server group.
hwDhcpv6SvrGroupEntry row .1.3.6.1.4.1.2011.6.8.1.20.1
The configuration list of DHCPv6 server group.
Indexes
Column Syntax OID
hwDhcpv6SvrGroupIndex
The index of DHCPv6 server group.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.20.1.1
hwDhcpv6SvrGroupName
The name of DHCPv6 server group.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.20.1.2
hwIPDhcpv6SvrAddr1
The primary DNS address.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.8.1.20.1.3
hwIPDhcpv6SvrAddr2
The seconday DNS address.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.8.1.20.1.4
hwIPDhcpv6PriSvrState
The status of primary DNS.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.6.8.1.20.1.5
hwIPDhcpv6ScdSvrState
The status of secondary DNS.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.6.8.1.20.1.6
hwIPDhcpv6SvrAutoRelease
The flag indicating whether server will automaticly send DHCPv6 release packet.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.20.1.7
hwIPDhcpv6SvrGroupRefCount
The referenced count of DHCPv6 server group.
Integer32
Constraints:
range: 0-16384
 .1.3.6.1.4.1.2011.6.8.1.20.1.8
hwDhcpv6SvrInterface1
The outer interface of primary DHCPv6 server.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.8.1.20.1.9
hwDhcpv6SvrInterface2
The outer interface of secondary DHCPv6 server.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.8.1.20.1.10
hwDhcpv6SvrAlgorithm
The algorithm of selecting DHCPv6 server.
Enumerationr/w
Enumerated Values:
1masterbackup
2loadingshare
3polling
 .1.3.6.1.4.1.2011.6.8.1.20.1.11
hwDhcpv6SvrWeight1
The weight of primary DHCPv6 server.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.8.1.20.1.12
hwDhcpv6SvrWeight2
The weight of secondary DHCPv6 server.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.8.1.20.1.13
hwIPDhcpv6Svr1VrfName
The vpn instance name of primary DHCPv6 server.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.20.1.14
hwIPDhcpv6Svr2VrfName
The vpn instance name of secondary DHCPv6 server.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.20.1.15
hwDhcpv6SvrGroupRowStatus
Row admin status. Support adding, modification and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.20.1.16
hwDhcpv6SvrSourceInterface
The interface name whose IP address is the source IP address carried in the packets sent to the server.
OctetStringr/w
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.6.8.1.20.1.17

hwIPv6RemotePoolTable

table
.1.3.6.1.4.1.2011.6.8.1.21 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6RemotePoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6RemotePoolTable' 
The configuration table of IPv6 remote address pool.
hwIPv6RemotePoolEntry row .1.3.6.1.4.1.2011.6.8.1.21.1
The configuration list of IPv6 remote address pool.
Indexes
Column Syntax OID
hwIPv6RemotePoolIndex
The index of remote address pool.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.21.1.1
hwIPv6RemotePoolName
The name of remote address pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.21.1.2
hwIPv6RemotePoolPrefixName
The prefix pool name of remote address pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.21.1.3
hwIPv6RemotePoolDhcpv6SvrGroupName
The DHCPv6 server group name of remote address pool.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.21.1.4
hwIPv6RemotePoolAvailableStatus
The flag indicating whether remote address pool is locked.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.21.1.5
hwIPv6RemotePoolExportHostRouteFlag
The flag indicating whether to export ipv6 host route.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.21.1.6
hwIPv6RemotePoolRowStatus
Row admin status. Support adding, modification and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.8.1.21.1.7
hwIPv6RemotePoolExportHostRouteIPv6Address
The flag indicating whether to export host's ipv6 address route .
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.21.1.8
hwIPv6RemotePoolExportHostRoutePDPrefix
The flag indicating whether to export host's pd prefix route.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.21.1.9
hwIPv6RemotePoolExportHostRouteNDPrefix
The flag indicating whether to export host's nd prefix route.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.6.8.1.21.1.10
hwIPv6RemotePoolWeight
The weight of this Remote IPv6 pool.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.8.1.21.1.11

hwDhcpv6ServerTable

table
.1.3.6.1.4.1.2011.6.8.1.23 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpv6ServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDhcpv6ServerTable' 
DHCPv6 server configuration table.
hwDhcpv6ServerEntry row .1.3.6.1.4.1.2011.6.8.1.23.1
The configuration of DHCPv6 server table.
Indexes
Column Syntax OID
hwDhcpv6SvrIndex
The index of DHCPv6 server.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.23.1.1
hwDhcpv6ServerIP
The IPv6 address of DHCPv6 server.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.8.1.23.1.2
hwDhcpv6ServerVRFName
The name of VPN instance for the DHCPv6 server.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.8.1.23.1.3
hwDhcpv6ServerIfIndex
The IfIndex of DHCPv6 server.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.23.1.4
hwDhcpv6ServerState
The state of DHCPv6 server.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.6.8.1.23.1.5
hwDhcpv6ServerSendSolicitSpeedNum
The speed of sending solicit packet.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.8.1.23.1.6
hwDhcpv6ServerSendSolicitSpeedSec
The interval of solicit packets sent by DHCPv6 server.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2011.6.8.1.23.1.7

hwIPV6AddressStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.24 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPV6AddressStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPV6AddressStatusTable' 
A table for configuring the status of ipv6 address which in ipv6 local preifx
hwIPV6AddressStatusEntry row .1.3.6.1.4.1.2011.6.8.1.24.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIPv6Address
Ipv6Address.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.6.8.1.24.1.1
hwIPv6AddressStatus
Ipv6Address status: idle(0) occupied(1) prohibitive(2) conflictive(3).
Status can set idle(0) when prohibitive(2) conflictive(3) reserved(7),set prohibitive(2) when idle(0).
Enumerationr/w
Enumerated Values:
0idle
1occupied
2prohibitive
3conflictive
4flex
5static
6radius
7reserved
 .1.3.6.1.4.1.2011.6.8.1.24.1.2
hwIPv6LocalPrefixName
Ipv6 Local prefix's name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.24.1.3

hwIPV6PrefixStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.25 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPV6PrefixStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPV6PrefixStatusTable' 
A table for configuring the status of ipv6 prefix which in ipv6 delegation preifx
hwIPV6PrefixStatusEntry row .1.3.6.1.4.1.2011.6.8.1.25.1
DESCRIPTION.
Indexes
Column Syntax OID
hwIpv6Prefix
Ipv6Prefix.
IPV6-TCIpv6AddressPrefix
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.2011.6.8.1.25.1.1
hwIpv6PrefixLen
Ipv6PrefixLength.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.8.1.25.1.2
hwIPv6PrefixStatus
Ipv6 Prefix status:idle(0) occupied(1) prohibitive(2) conflictive(3).
Status can set idle(0) when prohibitive(2) conflictive(3) reserved(7),set prohibitive(2) when idle(0).
Enumerationr/w
Enumerated Values:
0idle
1occupied
2prohibitive
3conflictive
4flex
5static
6radius
7reserved
8binded
 .1.3.6.1.4.1.2011.6.8.1.25.1.3
hwIPv6DelegationPrefixName
Ipv6 Delegation prefix's name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.8.1.25.1.4

hwCUIPPoolDynSubnetTable

table
.1.3.6.1.4.1.2011.6.8.1.28 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCUIPPoolDynSubnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwCUIPPoolDynSubnetTable' 
The IPv4 dynamic address pool list in the CU separation scenario.
hwCUIPPoolDynSubnetEntry row .1.3.6.1.4.1.2011.6.8.1.28.1
Dynamic address pool usage statistics.
Indexes
Column Syntax OID
hwCUIPNetWorkIndex
Network index.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.28.1.1
hwCUIPDynSubnetIndex
Subnet index.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.28.1.2
hwCUIPDynSubnetLowAddr
Low IP address of the subnet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.28.1.3
hwCUIPDynSubnetHighAddr
High IP address of the subnet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.28.1.4
hwCUIPDynSubnetUsedNum
Number of IP addresses of the subnet.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.28.1.5
hwCUIPDynSubnetConflict
Number of conflicting IP addresses of the subnet.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.28.1.6
hwCUIPDynSubnetUsedRatio
Subnet usage.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.2011.6.8.1.28.1.7
hwCUIPDynSubnetStatus
The status of this subnet.
Enumeration
Enumerated Values:
2used
3idle
4block
 .1.3.6.1.4.1.2011.6.8.1.28.1.8

hwCUIPv6PoolStatisticTable

table
.1.3.6.1.4.1.2011.6.8.1.29 · 1 row entry · 24 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCUIPv6PoolStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwCUIPv6PoolStatisticTable' 
IPv6 address pool usage statistics list in CU isolation scenario.
hwCUIPv6PoolStatisticEntry row .1.3.6.1.4.1.2011.6.8.1.29.1
Collect statistics about the usage of IPv6 address pools of UPs in the scenario of CU separation.
Indexes
Column Syntax OID
hwCUIPv6UpId
Id of ipv6 address pools.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.1
hwCUIpv6PoolNum
Number of IPv6 address pools configured.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.2
hwCUIpv6AddressIdleTotalNum
Number of idle IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.3
hwCUIpv6PrefixIdleTotalNum
Number of idle IPv6 prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.4
hwCUIpv6AddressUsedTotalNum
Number of in-use IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.5
hwCUIpv6PrefixUsedTotalNum
Number of in-use IPv6 prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.6
hwCUAllIPv6AddressTotalNum
Total number of IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.7
hwCUAllIPv6AddressUsedNum
Number of in-use IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.8
hwCUAllIPv6AddressIdleNum
Number of idle IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.9
hwCUAllIPv6ConflictAddressNum
Number of conflicting IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.10
hwCUAllIPv6ExcludeAddressNum
Number of disabled IPv6 addresses on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.11
hwCUAllIPv6AddressUsedPercent
IPv6 address usage on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.12
hwCUAllNDRAPrefixTotalNum
Total number of ND RA prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.13
hwCUAllNDRAPrefixUsedNum
Number of in-use ND RA prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.14
hwCUAllNDRAPrefixFreeNum
Number of idle ND RA prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.15
hwCUAllNDRAPrefixConflictNum
Number of conflicting ND RA prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.16
hwCUAllNDRAPrefixExcludeNum
Number of disabled ND RA prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.17
hwCUAllNDRAPrefixUsedPercent
ND RA prefix usage on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.18
hwCUAllPDPrefixTotalNum
Total number of PD prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.19
hwCUAllPDPrefixUsedNum
PD prefix usage on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.20
hwCUAllPDPrefixFreeNum
Number of idle PD prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.21
hwCUAllPDPrefixConflictNum
Number of conflicting PD prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.22
hwCUAllPDPrefixExcludeNum
Number of disabled PD prefixes on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.23
hwCUAllPDPrefixUsedPercent
PD prefix usage on the UP.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.29.1.24

hwCUIPPoolStatisticTable

table
.1.3.6.1.4.1.2011.6.8.1.30 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCUIPPoolStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwCUIPPoolStatisticTable' 
IPv4 address pool usage statistics list in CU isolation scenario.
hwCUIPPoolStatisticEntry row .1.3.6.1.4.1.2011.6.8.1.30.1
Collect statistics about the usage of IPv4 address pools of UPs in the scenario of CU separation.
Indexes
Column Syntax OID
hwIPPoolStatisticUpId
Id of ipv4 address pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.1
hwCUIPPoolNum
Number of IPv4 address pools configured.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.2
hwCUIPIdleTotalNum
Number of idle IPv4 addresses on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.3
hwCUIPUsedTotalNum
Number of in-use IPv4 addresses on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.4
hwCUIPConflictTotalNum
Number of conflicting IPv4 addresses on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.5
hwCUIPExcludeTotalNum
Number of disabled IPv4 addresses on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.6
hwCUIPTotalNum
Total number of IPv4 addresses on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.7
hwCUIPUsedPercent
IPv4 address usage on the UP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.30.1.8

hwIPPoolVpnStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.31 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPPoolVpnStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPPoolVpnStatusTable' 
IPv4 address pool usage statistics list of vpn.
hwIPPoolVpnStatusEntry row .1.3.6.1.4.1.2011.6.8.1.31.1
Collect statistics about the usage of IPv4 address pools of vpn.
Indexes
Column Syntax OID
hwIPv4PoolVPNInstance
VPN ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.1
hwIPPoolTotalNum
The total number of all IPv4 address pools of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.2
hwIPPoolIdleNum
The total number of free addresses in all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.3
hwIPPoolUsedNum
The total number of used addresses in all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.4
hwIPPoolConflictedNum
The total number of conflicting addresses in all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.5
hwIPPoolExcludeNum
The total number of addresses to be excluded from all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.6
hwIPPoolReservedNum
The total number of addresses to be reserved from all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.7
hwIPPoolStaticBindNum
The total number of addresses to be static binded from all IPv4 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.8
hwIPPoolVPNThreshold
The threshold of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.9
hwIPPoolUsedPercent
The used percent of addresses with the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.31.1.10

hwIPv6PoolVpnStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.32 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPv6PoolVpnStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwIPv6PoolVpnStatusTable' 
IPv6 address pool usage statistics list of vpn.
hwIPv6PoolVpnStatusEntry row .1.3.6.1.4.1.2011.6.8.1.32.1
Collect statistics about the usage of IPv6 address pools of vpn.
Indexes
Column Syntax OID
hwIPv6PoolVPNInstance
VPN ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.1
hwIPv6PoolTotalNum
The total number of all IPv6 address pools of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.2
hwIPv6PoolIdleNum
The total number of free addresses in all IPv6 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.3
hwIPv6PoolUsedNum
The total number of used addresses in all IPv6 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.4
hwIPv6PoolConflictedNum
The total number of conflicting addresses in all IPv6 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.5
hwIPv6PoolExcludeNum
The total number of addresses to be excluded from all IPv6 addresses of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.6
hwIPv6PoolVPNThreshold
The threshold of the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.7
hwIPv6PoolUsedPercent
The used percent of addresses with the vpn.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.8.1.32.1.8

hwDapPoolStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.33 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDapPoolStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDapPoolStatusTable' 
The table of dap-server ip pool status.
hwDapPoolStatusEntry row .1.3.6.1.4.1.2011.6.8.1.33.1
The entry of dap-server ip pool status.
Indexes
Column Syntax OID
hwDapPoolIndex
Index of address resource pool instance.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.33.1.1
hwDapPoolName
Name of the address resource pool instance.
OctetString
Constraints:
range: 0-36
 .1.3.6.1.4.1.2011.6.8.1.33.1.2
hwDapPoolStatusFlag
Address resource pool status.
Enumeration
Enumerated Values:
0unlocked
1locked
 .1.3.6.1.4.1.2011.6.8.1.33.1.3
hwDapPoolSubnetTotalNum
Total number of all subnet segments.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.33.1.4
hwDapPoolSubnetUsedNum
Total number of subnet segments in use.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.33.1.5
hwDapPoolSubnetIdleNum
Total number of free subnet segments.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.33.1.6
hwDapPoolSubnetBlockNum
Total number of blocked subnet segments.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.33.1.7
hwDapPoolSubnetUsedPercent
Utilization of subnet segments.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.33.1.8

hwDapSubnetStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.34 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDapSubnetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDapSubnetStatusTable' 
The table of dap-server ip pool subnet status.
hwDapSubnetStatusEntry row .1.3.6.1.4.1.2011.6.8.1.34.1
The entry of dap-server ip pool subnet status.
Indexes
Column Syntax OID
hwDapSubnetStatusFlag
Current status of the subnet segment.
Enumeration
Enumerated Values:
2used
3idle
4block
 .1.3.6.1.4.1.2011.6.8.1.34.1.1
hwDapSubnetClientName
Client name registered with the server.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.2011.6.8.1.34.1.2
hwDapSubnetMaskLength
Subnet segment mask length.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.34.1.3
hwDapSubnetIPTotalNum
Total addresses in subnet segment.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.34.1.4
hwDapSubnetStartIP
Initial IP of divisible subnet segment.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.34.1.5
hwDapSubnetStopIP
End IP of distributable subnet segment.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.8.1.34.1.6

hwDapV6PoolStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.35 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDapV6PoolStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDapV6PoolStatusTable' 
The table of dap-server ipv6 pool status.
hwDapV6PoolStatusEntry row .1.3.6.1.4.1.2011.6.8.1.35.1
The entry of dap-server ipv6 pool status.
Indexes
Column Syntax OID
hwDapV6PoolIndex
Index of address resource pool instance.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.6.8.1.35.1.1
hwDapV6PoolName
Name of the address resource pool instance.
OctetString
Constraints:
range: 0-36
 .1.3.6.1.4.1.2011.6.8.1.35.1.2
hwDapV6PoolStatusFlag
Address resource pool status.
Enumeration
Enumerated Values:
0unlocked
1locked
 .1.3.6.1.4.1.2011.6.8.1.35.1.3
hwDapV6PoolPrefixTotalNum
Total number of all prefixes.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.35.1.4
hwDapV6PoolPrefixUsedNum
Total prefixes used for status.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.35.1.5
hwDapV6PoolPrefixIdleNum
Total number of prefixes in idle state.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.35.1.6
hwDapV6PoolPrefixBlockNum
Total number of prefixes blocked.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.35.1.7
hwDapV6PoolPrefixUsedPercent
Prefix usage.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.35.1.8

hwDapV6PrefixStatusTable

table
.1.3.6.1.4.1.2011.6.8.1.36 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDapV6PrefixStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPPOOL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPPOOL-MIB::hwDapV6PrefixStatusTable' 
The table of dap-server ipv6 pool prefix status.
hwDapV6PrefixStatusEntry row .1.3.6.1.4.1.2011.6.8.1.36.1
The entry of dap-server ipv6 pool prefix status.
Indexes
Column Syntax OID
hwDapV6PrefixStatusFlag
Current status of the subnet segment.
Enumeration
Enumerated Values:
2used
3idle
4block
 .1.3.6.1.4.1.2011.6.8.1.36.1.1
hwDapV6PrefixClientName
Client name registered with the server.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.2011.6.8.1.36.1.2
hwDapV6PrefixMaskLength
Prefix mask length.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.6.8.1.36.1.3
hwDapV6PrefixIPv6Address
Prefix IPv6 address.
IPV6-TCIpv6AddressPrefix
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.2011.6.8.1.36.1.4