HUAWEI-IPDSLAM-PPPOE-MIB Table View

Used for starting or stopping the PPPoE dialup simulation service, and for 
querying the result of the simulated PPPoE dialup.
The index of this table is hwPPPoESmltObjIndex.

hwPPPoESmltAdminEntry row .1.3.6.1.4.1.2011.6.107.2.1

Used for starting or stopping the PPPoE dialup simulation service, and for
querying the result of the simulated PPPoE dialup.
The index of this entry is hwPPPoESmltObjIndex.

Indexes

hwPPPoESmltObjIndex

Column	Syntax	OID
hwPPPoESmltObjIndex Indicates the index of hwPPPoESmltAdminTable. This leaf means the dialup ID. Currently, only one user is supported. The maximum value of the index is 1. If you specify it to 4294967295, the system will automatically…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.107.2.1.1
hwPPPoESmltSrvFlowIndex Indicates the service port ID. Here, it refers to the ID of a service port that is already created on the current device. The service port ID on the NMS is larger than the service port ID on the host by 1.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.6.107.2.1.2
hwPPPoESmltUserName Indicates the user name.	OctetStringr/w Constraints: range: 1-65	.1.3.6.1.4.1.2011.6.107.2.1.3
hwPPPoESmltUserPassword Indicates the user password for authentication.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.107.2.1.4
hwPPPoESmltAuthMode Indicates the user authentication mode. Currently, the device supports two modes, Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(2) -Password Authentication Protocol mode	Enumerationr/w Enumerated Values: 1 chap 2 pap	.1.3.6.1.4.1.2011.6.107.2.1.5
hwPPPoESmltOverTime Indicates the test timeout time. It is an optional parameter. Unit: second Range: 5-60 Default: 5	Integer32r/w Constraints: range: 5-60	.1.3.6.1.4.1.2011.6.107.2.1.6
hwPPPoESmltCurrentPhase Indicates the current stage of the simulation. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP negotiation stage. In this stage, …	Enumeration Enumerated Values: 1 discovery 2 lcp 3 authentication 4 ncp 5 online 6 stop	.1.3.6.1.4.1.2011.6.107.2.1.7
hwPPPoESmltResult Indicates the simulation result. Options: 1. success(0) -indicates the PPPoE simulation is success 2. otherError(1) -indicates other errors 3. timeout(2) -indicates the PPPoE simulation tim…	Enumeration Enumerated Values: 0 success 1 otherError 2 timeout 3 paramNegoFail 4 authenticationFail 5 peerDownRequest 6 waitPADOTimeout 7 waitPADSTimeout 8 waitPPPTimeout 9 linkAbnormal	.1.3.6.1.4.1.2011.6.107.2.1.8
hwPPPoESmltStartTime Indicates the simulation start time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.107.2.1.9
hwPPPoESmltEndTime Indicates the simulation end time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.107.2.1.10
hwPPPoESmltUserSessionId Indicates the obtained session ID of the user. Range: 1-4294967295	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.107.2.1.11
hwPPPoESmltUserIp Indicates the obtained IP address of the user. Data type: IpAddress.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.107.2.1.12
hwPPPoESmltGatewayIp Indicates the obtained gateway IP address. Data type: IpAddress.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.107.2.1.13
hwPPPoESmltRowStatus Indicates the row status. It is used for starting or stopping the PPPoE dialup simulation service. Only options active(1), createAndGo(4), and destroy(6) are supported. To start the PPPoE dialup simulation service, yo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.107.2.1.14
hwPPPoESmltUserMac Indicates the user-side MAC address. It is an optional parameter. By default, it is bridge MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.107.2.1.15

Used for setting and querying the configuration information about a PPPoE client. 
The index of this table is hwPPPoEClientConfigName.

hwPPPoEClientConfigEntry row .1.3.6.1.4.1.2011.6.107.3.1

Used for setting and querying the configuration information about a PPPoE client.
The index of this entry is hwPPPoEClientConfigName.

Indexes

hwPPPoEClientConfigName

Column	Syntax	OID
hwPPPoEClientConfigName Indicates the identification of a PPPoE client.Range: 1-32 characters. The PPPoE client identification must be presented in the ASCII codes of the corresponding characters. For example, if the PPPoE client identificati…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.107.3.1.1
hwPPPoEClientConfigUserName Used for setting or querying the user name of PPPoE dialup. Range: 1-65 characters.	OctetStringr/w Constraints: range: 1-65	.1.3.6.1.4.1.2011.6.107.3.1.2
hwPPPoEClientConfigUserPassword Used for setting or querying the user password of PPPoE dialup. Range: 0-16 characters.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.107.3.1.3
hwPPPoEClientConfigAuthMode Used for setting or querying the authentication mode of a PPPoE client. Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(2) -Password Authentication Protocol mode Default: chap(1)	Enumerationr/w Enumerated Values: 1 chap 2 pap	.1.3.6.1.4.1.2011.6.107.3.1.4
hwPPPoEClientConfigVlanID Used for setting or querying the VLAN for the dialup of a PPPoE client. Range: 1-4093 Default: 1	Integer32r/w Constraints: range: 1-4093	.1.3.6.1.4.1.2011.6.107.3.1.5
hwPPPoEClientConfigEnableFlag Used for setting (enabling/disabling) or querying the status of the PPPoE dialup function. Options: 1. enable(1) -indicates the PPPoE dialup function is enabled 2. disable(2) -indicates the PPPoE dialup function is dis…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.107.3.1.6
hwPPPoEClientConfigIntervalTime Used for setting or querying the interval for sending the Echo-Request packet. Range: 1-65535 Unit: second Default: 20s	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.6.107.3.1.7
hwPPPoEClientConfigRetransmitTimes Indicates the count of retransmitting the Echo-Request packet at timeout. Range: 1-10 Default: 3	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.107.3.1.8
hwPPPoEClientConfigRowStatus Indicates the row status. It is used for setting, modifying, or deleting the identification of a PPPoE client. Options active(1), createAndGo(4), and destroy(6) are supported. To set the identification of a PPPoE clien…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.107.3.1.9

Used for setting and querying the information about the session of a PPPoE client. 
The index of this table is hwPPPoEClientConfigName. 
To serve as an index, the value of hwPPPoEClientConfigName must be already configured 
in hwPPPoEClientConfigTable.

hwPPPoEClientSessionEntry row .1.3.6.1.4.1.2011.6.107.4.1

Used for setting and querying the information about the session of a PPPoE client.
The index of this entry is hwPPPoEClientConfigName.
To serve as an index, the value of hwPPPoEClientConfigName must be already configu…

Indexes

hwPPPoEClientConfigName

Column	Syntax	OID
hwPPPoEClientSessionCurrentPhase Used for querying the current stage of a PPPoE session. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP negotiation stage. In this stage, …	Enumeration Enumerated Values: 1 discovery 2 lcp 3 authentication 4 ncp 5 online 6 disable 255 initialstate	.1.3.6.1.4.1.2011.6.107.4.1.1
hwPPPoEClientSessionId Used for querying the session ID obtained by a PPPoE client. When PPPoE dialup is not performed or the dialup fails, the session ID is an invalid value 4294967295.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.107.4.1.2
hwPPPoEClientSessionUserIp Used for querying the IP address of a PPPoE client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.107.4.1.3
hwPPPoEClientSessionUserMac Used for querying the MAC address of a PPPoE client.	OctetString Constraints: range: 17-17	.1.3.6.1.4.1.2011.6.107.4.1.4
hwPPPoEClientSessionGatewayIp Used for querying the IP address of the gateway to which a PPPoE client is connected.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.107.4.1.5
hwPPPoEClientSessionGatewayMac Used for querying the MAC address of the gateway to which a PPPoE client is connected.	OctetString Constraints: range: 17-17	.1.3.6.1.4.1.2011.6.107.4.1.6
hwPPPoEClientSessionStartTime Used for querying the dialup start time of a PPPoE client, in the unit of second. The time value indicates the seconds lapsed from the Greenwich time 1970-01-01 00:00:00 to the dialup starting.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.107.4.1.7
hwPPPoEClientSessionEndTime Used for querying the dialup end time of a PPPoE client, in the unit of second. The time value indicates the seconds lapsed from the Greenwich time 1970-01-01 00:00:00 to the dialup ending.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.107.4.1.8
hwPPPoEClientSessionDiagnostic Used for querying the information about a PPPoE dialup result. Options: 1. success(1) -indicates successful PPPoE dialup 2. otherError(2) -indicates other errors 3. timeout(3) -indicates di…	Enumeration Enumerated Values: 1 success 2 otherError 3 timeout 4 waitPADOTimeout 5 waitPADSTimeout 6 waitPPPTimeout 7 paramNegoFail 8 authenticationFail 9 peerDownRequest 10 linkAbnormal 256 initialstate	.1.3.6.1.4.1.2011.6.107.4.1.9

Used for querying the information about a PPPoE single-MAC user. 
The indexes of this table are ifIndex and hwPPPoESmacUserIndex.

hwPPPoESmacCurrentUserEntry row .1.3.6.1.4.1.2011.6.107.7.1

Used for querying the information about a PPPoE single-MAC user.
The indexes of this entry are ifIndex and hwPPPoESmacUserIndex.

Indexes

IF-MIBifIndex hwPPPoESmacUserIndex

Column	Syntax	OID
hwPPPoESmacUserIndex PPPoE SMAC user index.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.2011.6.107.7.1.1
hwPPPoESmacUserFlowId PPPoE user flow ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.107.7.1.2
hwPPPoESmacUserSessionId PPPoE session ID.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.107.7.1.3
hwPPPoESmacSessionUserMac PPPoE SMAC user MAC address.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2011.6.107.7.1.4
hwPPPoESmacVlanID PPPoE SMAC user VLAN.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2011.6.107.7.1.5