HUAWEI-IPDSLAM-ACLV6-MIB Table View

Describes the configured ACLv6 groups in the system and basic information about each group,
such as the number of rules, steps, and descriptions. 
The index of this table is hwAclv6NumGroupAclNum. 
The hwAclv6NumGroupAclNum identifies an ACLv6 group.

hwAclv6NumGroupEntry row .1.3.6.1.4.1.2011.5.112.1.1.1

Describes the configured ACLv6 groups in the system and basic information about each group,
such as the number of rules, steps, and descriptions.
The index of this entry is hwAclv6NumGroupAclNum.
The hwAclv6NumGroupAcl…

Indexes

hwAclv6NumGroupAclNum

Column	Syntax	OID
hwAclv6NumGroupAclNum The index of this hwAclv6NumGroupTable. Uniquely identifies an ACLv6 group. Value range: 2000-3999,4294967295 The groups with indexes ranging from 2000 to 2999 are basic ACLv6 groups. When hwAclv6NumGro…	Unsigned32 Constraints: range: 2000-3999 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.5.112.1.1.1.1
hwAclv6NumGroupMatchOrder Indicates the priority order of an ACLv6 group. Options: 1. config(1) -the priority order of an ACLv6 group is configuration order 2. auto(2) -the priority order of an ACLv6 group is auto Currently, this leaf is rea…	Enumeration Enumerated Values: 1 config 2 auto	.1.3.6.1.4.1.2011.5.112.1.1.1.2
hwAclv6NumGroupSubitemNum Indicates the number of rules in an ACLv6 group. This leaf is read-only. The value increases by one when a rule is added to the ACLv6 group.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.112.1.1.1.3
hwAclv6NumGroupStep Indicates the step of adding rules to an ACLv6 group. Range: 1-20 When a rule is added and its ID is not specified, the ID of the rule is: step+last rule ID/step*step. If a user does not enter a value for hwAclv6NumGro…	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2011.5.112.1.1.1.4
hwAclv6NumGroupDescription Indicates the description of an ACLv6 group. It is used for users to identify different ACLv6 groups. Up to 127 characters are supported. If hwAclv6NumGroupDescription is not set, the description is null by default.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.5.112.1.1.1.5
hwAclv6NumGroupCountClear Used for clearing the software statistics of an ACLv6 group. Options: 1. cleared(1) -clear the software statistics of an ACLv6 group 2. nouse(2) -indicates no operation When this leaf is queried, the val…	Enumerationr/w Enumerated Values: 1 cleared 2 nouse	.1.3.6.1.4.1.2011.5.112.1.1.1.6
hwAclv6NumGroupRowStatus Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an ACLv6 group 3. destroy(6) -delete an ACLv6 group It is used for creati…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.112.1.1.1.7
hwAclv6NumGroupAclType indicates the type of the ACLv6 group. Options: 1. basicAclv6(2) -Indicates that the type of the ACLv6 group is basic. 2. advAclv6(3) -Indicates that the type of the ACLv6 group is advanced.	Enumerationr/w Enumerated Values: 2 basicAclv6 3 advAclv6	.1.3.6.1.4.1.2011.5.112.1.1.1.8
hwAclv6NumGroupAclNumAllocMethod indicates the method of allocating the ACLv6 group index automatically. Options: 1. minFreeId(1) -means to allocate the ACLv6 group index from the minimal free index. 2. maxFreeId(2) -means to allocate the ACLv6 group …	Enumerationr/w Enumerated Values: 1 minFreeId 2 maxFreeId	.1.3.6.1.4.1.2011.5.112.1.1.1.9

Describes the details about a basic ACLv6 rule in a basic ACLv6 group, 
including the source IP address, prefix length, and other attributes of the rule. 
          
The indexes of this table are hwAclv6BasicAclNum and hwAclv6BasicSubitem. 
hwAclv6BasicAclNum is the ID of a basic ACLv6 group. Make sure that the ID is already created in hwAclv6NumGroupTable.
hwAclv6BasicSubitem is the ID of a basic ACLv6 rule in the basic ACLv6 group.

hwAclv6BasicRuleEntry row .1.3.6.1.4.1.2011.5.112.1.2.1

Describes the details about a basic ACLv6 rule in a basic ACLv6 group,
including the source IP address, prefix length, and other attributes of the rule.

The indexes of this entry are hwAclv6BasicAclNum an…

Indexes

hwAclv6BasicAclNum hwAclv6BasicSubitem

Column	Syntax	OID
hwAclv6BasicAclNum Uniquely identifies a basic ACLv6 group. Range: 2000-2999 Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable.	Unsigned32 Constraints: range: 2000-2999	.1.3.6.1.4.1.2011.5.112.1.2.1.1
hwAclv6BasicSubitem Describes the ID of a basic ACLv6 rule in the basic ACLv6 group, uniquely identifying a basic ACLv6 rule. Range: 0-4294967295 In the create operation, if the value is 4294967295, the ID of a rule is gene…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.112.1.2.1.2
hwAclv6BasicAct Describes the action of a rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates that the data packets that meet the conditions are discarded	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2011.5.112.1.2.1.3
hwAclv6BasicSrcIpAddressType Describes the ip-address type of the rule. The value represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. This value must be used if the value of the corresponding …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.112.1.2.1.4
hwAclv6BasicSrcIpAddress Describes source IP address of the rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress text…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.112.1.2.1.5
hwAclv6BasicSrcIpAddressPrefixLength Describes source IP address prefix length of the rule. Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most signifi…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.2011.5.112.1.2.1.6
hwAclv6BasicTimeRangeName Describes the time range name of a rule. It is used when the effective time of a rule needs to be configured. If hwAclv6BasicTimeRangeName is not set, the rule is valid all the time by default.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.112.1.2.1.7
hwAclv6BasicEnable Describes whether the rule is valid. Options: 1. true(1) -the rule is valid 2. false(2) -the rule is invalid If the rule is associated with a time range parameter through hwAclv6BasicTimeRangeName and the current tim…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.112.1.2.1.8
hwAclv6BasicCount Describes the statistics of packets that match the rule.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.112.1.2.1.9
hwAclv6BasicCountClear Clears the statistics of packets that match the rule. Options: 1. cleared(1) -clear the statistics of packets that match the basic ACL rules 2. nouse(2) -indicates no operation When this leaf is queried…	Enumerationr/w Enumerated Values: 1 cleared 2 nouse	.1.3.6.1.4.1.2011.5.112.1.2.1.10
hwAclv6BasicPriority Describes the priority of a rule. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the rule with the highest priority prevails. …	Integer32r/w Constraints: range: 0-9	.1.3.6.1.4.1.2011.5.112.1.2.1.11
hwAclv6BasicRowStatus Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a basic ACLv6 rule 3. destroy(6) -delete a basic ACLv6 rule and clear the p…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.112.1.2.1.12

Describes the details about an advanced ACLv6 rule in an advanced ACLv6 group.
          
The indexes of this table are hwAclv6AdvancedAclNum and hwAclv6AdvancedSubitem. 
hwAclv6AdvancedAclNum is the ID of an advanced ACLv6 group. Make sure that the ID is already created in hwAclv6NumGroupTable. 
hwAclv6AdvancedSubitem is the ID of an advanced ACLv6 rule in the advance ACLv6 group.

hwAclv6AdvancedRuleEntry row .1.3.6.1.4.1.2011.5.112.1.3.1

Describes the details about an advanced ACLv6 rule in an advanced ACLv6 group.

The indexes of this entry are hwAclv6AdvancedAclNum and hwAclv6AdvancedSubitem.
hwAclv6AdvancedAclNum is the ID of an advanced…

Indexes

hwAclv6AdvancedAclNum hwAclv6AdvancedSubitem

Column	Syntax	OID
hwAclv6AdvancedAclNum Uniquely identifies an advanced ACLv6 group. Range: 3000-3999 Make sure that the ID of the ACLv6 group is already created in hwAclv6NumGroupTable.	Unsigned32 Constraints: range: 3000-3999	.1.3.6.1.4.1.2011.5.112.1.3.1.1
hwAclv6AdvancedSubitem Describes the ID of an advanced ACLv6 rule in an advanced ACLv6 group, uniquely identifying an advanced ACLv6 rule. Range: 0-4294967295 In the create operation, if the value is 4294967295, the ID of an a…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.112.1.3.1.2
hwAclv6AdvancedAct Describes the action of a rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates that the data packets that meet the conditions are discarded	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2011.5.112.1.3.1.3
hwAclv6AdvancedProtocol Describes the protocol of IP packets that matches an advanced ACLv6 rule. Range: 0-255 Default: 0 Common protocols: GRE tunneling(47) Internet Control Message Protocol6(58) Any IP protocol(0)…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.112.1.3.1.4
hwAclv6AdvancedSrcIpAddressType Describes the ip-address type of the rule. The value represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. This value must be used if the value of the corresponding …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.112.1.3.1.5
hwAclv6AdvancedSrcIpAddress Describes source IP address of the rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress text…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.112.1.3.1.6
hwAclv6AdvancedSrcIpAddressPrefixLength Describes source IP address prefix length of the rule. Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most signific…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.2011.5.112.1.3.1.7
hwAclv6AdvancedSrcOp Describes the operation types of comparing packet source ports when the type of hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-5 Options: 1. lt(1) -indicates '<' 2. eq(2) -indicates '=…	Enumerationr/w Enumerated Values: 1 lt 2 eq 3 gt 4 neq 5 range 255 invalid	.1.3.6.1.4.1.2011.5.112.1.3.1.8
hwAclv6AdvancedSrcPort1 Describes the operation value of port 1 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp when hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-65535 For examp…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.112.1.3.1.9
hwAclv6AdvancedSrcPort2 Describes the operation value of port 2 in the comparison operation types of the source port in hwAclv6AdvancedSrcOp when hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-65535 The operation value…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.112.1.3.1.10
hwAclv6AdvancedDestIpAddressType Destination IP address type of the advanced ACLv6 rule. A value that represents a type of Internet address. Options: 1. unknown(0) -An unknown address type. This value must be used if the value of the corresponding …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.112.1.3.1.11
hwAclv6AdvancedDestIpAddress Describes destination IP address of the advanced ACLv6 rule. Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.112.1.3.1.12
hwAclv6AdvancedDestIpAddressPrefixLength Describes destination IP address prefix length of the advanced ACLv6 rule. Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits fr…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.2011.5.112.1.3.1.13
hwAclv6AdvancedDestOp Describes destination port operation symbol of the advanced ACLv6 rule when the hwAclv6AdvancedProtocol is TCP or UDP. Options: 1. lt(1) -indicates '<' 2. eq(2) -indicates '=' …	Enumerationr/w Enumerated Values: 1 lt 2 eq 3 gt 4 neq 5 range 255 invalid	.1.3.6.1.4.1.2011.5.112.1.3.1.14
hwAclv6AdvancedDestPort1 Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp when hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-65535 For example, …	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.112.1.3.1.15
hwAclv6AdvancedDestPort2 Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclv6AdvancedDestOp when hwAclv6AdvancedProtocol is set to TCP or UDP. Range: 0-65535 The operation…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.112.1.3.1.16
hwAclv6AdvancedPrecedence Describes the priority field of data frames that an advanced ACLv6 rule needs to match. If the value is not specified for an advanced ACLv6 rule, the invalid value -1 is obtained in the query operation. …	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.5.112.1.3.1.17
hwAclv6AdvancedTos Describes the type of service (ToS) field of data frames that an advanced ACLv6 rule needs to match. Range: 0-15, -1 If the value is not specified for an advanced ACLv6 rule, the invalid value -1 is obta…	Integer32r/w Constraints: range: -1-15	.1.3.6.1.4.1.2011.5.112.1.3.1.18
hwAclv6AdvancedDscp Describes the differentiated services code point (DSCP) value of data frames that an advanced ACLv6 rule needs to match. Range: 0-63, -1 If the value is not specified for an advanced ACLv6 rule, the inv…	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.5.112.1.3.1.19
hwAclv6AdvancedTimeRangeName Describes the time range name of a rule. It is used when the effective time of a rule needs to be configured. If hwAclv6AdvancedTimeRangeName is not set, the rule is valid all the time by default.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.112.1.3.1.20
hwAclv6AdvancedIcmpv6Type Describes the ICMPv6 type when packets are filtered by ICMPv6 type and when hwAclv6AdvancedProtocol is set to ICMPv6. Range: 0-255, -1 If the value is not specified for an advanced ACLv6 rule, the invalid…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.112.1.3.1.21
hwAclv6AdvancedIcmpv6Code Describes ICMPv6 codes that the ICMPv6 packets are filtered both by ICMPv6 type and ICMP code when hwAclv6AdvancedProtocol is set to ICMPv6. Range: 0-255, -1 If the value is not specified for an advanced ACLv6 rule, th…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.112.1.3.1.22
hwAclv6AdvancedEnable Describes whether an advanced ACLv6 rule is valid. Options: 1. true(1) -indicates that an advanced ACLv6 rule is valid 2. false(2) -indicates that an advanced ACLv6 rule is invalid If the advanced ACLv6…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.112.1.3.1.23
hwAclv6AdvancedCount Describes the statistics of packets that match the rule.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.112.1.3.1.24
hwAclv6AdvancedCountClear Clears the statistics of packets that match the rule. Options: 1. cleared(1) -clear the statistics of packets that match the advanced ACLv6 rules 2. nouse(2) -indicates no operation When this leaf is qu…	Enumerationr/w Enumerated Values: 1 cleared 2 nouse	.1.3.6.1.4.1.2011.5.112.1.3.1.25
hwAclv6AdvancedPriority Describes the priority of a rule. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the rule with the highest priority prevails. …	Integer32r/w Constraints: range: 0-9	.1.3.6.1.4.1.2011.5.112.1.3.1.26
hwAclv6AdvancedRowStatus Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an advanced ACLv6 rule 3. destroy(6) -delete an advanced ACLv6 rule and cle…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.112.1.3.1.27