HUAWEI-IF-EXT-MIB Table View

hwIFExtIndex is the unique identifier of the table. It is written when the table is created and cannot be modified later.
The table describes the extended attributes of an interface, such as the Layer 2/Layer 3 identifier and frame type of the interface.

hwIFExtEntry row .1.3.6.1.4.1.2011.5.25.41.1.1.1.1

Entries of private extended interface table.

Indexes

No indexes recorded

Column	Syntax	OID
hwIFExtIndex This object indicates the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.1
hwIFExtLayer This object indicates the Layer 2/Layer 3 switching flag of an interface. According to the switching command, note the following: When Layer2(1) is 1, the interface switches from Layer 3 mode to Layer 2 mode. When Layer…	Enumerationr/w Enumerated Values: 0 unsuppress 1 suppress	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.2
hwIFExtFrameType This object indicates the type of frames that a VLAN virtual interface receives. Frame formats include ethernetII(1), ethernetII(2), ethernet8022(3), and ethernet8023. The value for the ethernetII(1) format is 1. Curr…	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.3
hwIFExtFlowStatInterval This object indicates the interval for collecting traffic statistics for an interface. The value ranges from 0 to 600, in seconds. The default value is 300.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.4
hwIFExtFlushReceiveEnable Whether or not permit the port to take over FLUSHDUs. Once it is enabled, the port will take over SmartLink FlushDUs from related vlans so as to delete the MAC forwarding table in the local equipment.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.5
hwIFExtFlushVlanId The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6
hwIFExtFlushPasswd A 16-octet read-write value used to define the password for negotiation.	SnmpPasswdStringr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.7
hwIFExtFlowStatus This object indicates the traffic status of an interface.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.8
hwIFExtMtu This object indicates the MTU of an interface. The MTU value varies according to interface types. The default MTU value also varies. The MTU value can be modified.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.9
hwIFExtMacAddr This object indicates the MAC address of an interface.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.10
hwIFExtBlockPriority The blocked priority of the interface.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.11
hwIFExtMacShift The mac-shift state of the interface. 1:normal 2:monitor mac-shift	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.12
hwIFExtSuppressStatus This object indicates the suppression status of an interface. 0: The interface is not suppressed. 1: The interface is suppressed.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.13
hwIFExtPoisonReverse Whether or not enable Split-horizon forwarding	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.14
hwIFExtInputPktRate This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.15
hwIFExtInputHighPktRate This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.16
hwIFExtOutputPktRate This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.17
hwIFExtOutputHighPktRate This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.18
hwIFExtInputOctetRate This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Enumerated Values: 0 unsuppress 1 suppress Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.19
hwIFExtInputHighOctetRate This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.20
hwIFExtOutputOctetRate This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bit…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.21
hwIFExtOutputHighOctetRate This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bit…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.22
hwIFExtSwitchPortIndex Number of layer2 interface port, a unique value, for each port.It is recommended that values are assigned contiguously starting from 1. If the return value is -1, this interface is not a Layer 2 interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.23
hwIFExtSuppressStatusIPv6 The suppress state of the interface(IPv6). 0:unsuppress 1:suppress	Enumeration Enumerated Values: 0 timeslot0 1 timeslot1 2 timeslot2 3 timeslot3 4 timeslot4 5 timeslot5 6 timeslot6 7 timeslot7 8 timeslot8 9 timeslot9 10 timeslot10 11 timeslot11 12 timeslot12 13 timeslot13 14 timeslot14 15 timeslot15 16 timeslot16 17 timeslot17 18 timeslot18 19 timeslot19 20 timeslot20 21 timeslot21 22 timeslot22 23 timeslot23 24 timeslot24 25 timeslot25 26 timeslot26 27 timeslot27 28 timeslot28 29 timeslot29 30 timeslot30 31 timeslot31	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.24
hwIFExtInputPkts The total number of packets received on the interface. The counter value is 64 bits.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.25
hwIFExtOutputPkts The total number of packets transmitted out of the interface. The counter value is 64 bits.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.26
hwIFExtInputUnicastBitRate This object indicates the bit rate of the incoming unicast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.27
hwIFExtOutputUnicastBitRate This object indicates the bit rate of the outgoing unicast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.28
hwIFExtInputMulticastBitRate This object indicates the bit rate of the incoming multicast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.29
hwIFExtOutputMulticastBitRate This object indicates the bit rate of the outgoing multicast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.30
hwIFExtInputBroadcastBitRate This object indicates the bit rate of the incoming broadcast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.31
hwIFExtOutputBroadcastBitRate This object indicates the bit rate of the outgoing broadcast traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.32
hwIFExtInputUnicastPktRate This object indicates the rate of the incoming unicast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.33
hwIFExtOutputUnicastPktRate This object indicates the rate of the outgoing unicast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.34
hwIFExtInputMulticastPktRate This object indicates the rate of the incoming multicast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.35
hwIFExtOutputMulticastPktRate This object indicates the rate of the outgoing multicast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.36
hwIFExtInputBroadcastPktRate This object indicates the rate of the incoming broadcast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.37
hwIFExtOutputBroadcastPktRate This object indicates the rate of the outgoing broadcast packets on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.38
hwIFExtInputBitRate This object indicates the bit rate of the incoming traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.39
hwIFExtOutputBitRate This object indicates the bit rate of the outgoing traffic on an interface. The rate value is 64 bits.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.40
hwIFExtDampStatus This object indicates the physical suppression status of an interface. 0: The interface is not suppressed. 1: The interface is suppressed.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.41
hwIFExtPhyStatusUpTime This object indicates the accumulated time in seconds during which the physical status of the interface remains up after its creation.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.1.1.1.42

Interface extended table of private mib.

hwLinkModeChangeAutoCreateIfEntry row .1.3.6.1.4.1.2011.5.25.41.1.1.4.1

Entries of private extended interface table.

Indexes

No indexes recorded

Column	Syntax	OID
hwAutoIfIndex Index of extended table of interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.1.4.1.1
hwNewIfTimeslot The time slot of the TDM interface: timeslot0(0):The time slot 0 on the TDM interface, timeslot1(1):The time slot 1 on the TDM interface, timeslot2(2):The time slot 2 on the TDM interface, timeslot3(3):The time slot 3 o…	Bits	.1.3.6.1.4.1.2011.5.25.41.1.1.4.1.2

hwRemoteIfTable is a virtual access interface table.

hwRemoteIfEntry row .1.3.6.1.4.1.2011.5.25.41.1.1.6.1

Entries of private extended remote interface table.

Indexes

No indexes recorded

Column	Syntax	OID
hwRemoteIfIndex Index of extended table of remote interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.1
hwRemoteIfInOctets The total number of octets received on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.2
hwRemoteIfInPkts The total number of packets received on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.3
hwRemoteIfInUcastPkts Number of unicast packets received on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.4
hwRemoteIfInMulticastPkts Number of multicast packets received on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.5
hwRemoteIfInBroadcastPkts Number of broadcast packets received on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.6
hwRemoteIfInOctetRate This object indicates the octet rate of the incoming traffic on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.7
hwRemoteIfInPktRate This object indicates the rate of the incoming packets on an remote interface. The rate value is 64 bits.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.8
hwRemoteIfInErrorPkts Number of error packets received on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.9
hwRemoteIfInDiscardPkts Number of received packets discarded on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.10
hwRemoteIfOutOctets The total number of octets transmitted out of the interface.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.11
hwRemoteIfOutPkts The total number of packets transmitted out of the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.12
hwRemoteIfOutUcastPkts Number of unicast packets sent on an interface.	SNMPv2-SMICounter64 Enumerated Values: 1 assignedIp 2 dhcpIp 3 bootpIp 4 other 5 linklayer 6 random Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.13
hwRemoteIfOutMulticastPkts Number of multicast packets sent on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.14
hwRemoteIfOutBroadcastPkts Number of broadcast packets sent on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.15
hwRemoteIfOutOctetRate This object indicates the octet rate of the outgoing traffic on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.16
hwRemoteIfOutPktRate This object indicates the rate of the outgoing packets on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.17
hwRemoteIfOutErrorPkts Number of error packets sent on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.18
hwRemoteIfOutDiscardPkts Number of sent packets discarded on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.6.1.19

Interface Second Cycle Rate Table.

hwIFExtDualFlowRateEntry row .1.3.6.1.4.1.2011.5.25.41.1.1.7.1

An interface second cycle rate entry.

Indexes

No indexes recorded

Column	Syntax	OID
hwIFExtDualFlowIndex The index value that uniquely identifies the interface to which this entry is applicable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.1.7.1.1
hwIFExtDualFlowInputPktRate This object indicates the second rate of the incoming packets on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.7.1.2
hwIFExtDualFlowOutputPktRate This object indicates the second rate of the outgoing packets on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.7.1.3
hwIFExtDualFlowInputOctetRate This object indicates the second octet rate of the incoming traffic on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.7.1.4
hwIFExtDualFlowOutputOctetRate This object indicates the second octet rate of the outgoing traffic on an interface.	SNMPv2-SMICounter64 Enumerated Values: 1 unicast 2 anycast 3 broadcast Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.1.7.1.5

hwIfIpTable describes information about IP addresses configured for an interface. On an interface, one primary IP address and multiple secondary IP addresses can be configured. You can create, delete, and view information about the IP addresses of an interface.

hwIfIpEntry row .1.3.6.1.4.1.2011.5.25.41.1.2.1.1

Interface IP address configuration

Indexes

No indexes recorded

Column	Syntax	OID
hwIpAdEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Enumerated Values: 1 preferred 2 deprecated 3 invalid 4 inaccessible 5 unknown 6 tentative 7 duplicate 8 optimistic Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.1
hwIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.2
hwIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.3
hwIpAdEntBcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones br…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.4
hwIpAdEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.5
hwIpAdEntAddressType The flag indicates whether the IP address is primary IP address. One interface has only one primary IP address, but can have many sub IP address. So when add a primary IP address to an interface that has already a prima…	HwIpAddressTyper/w Type Values: 1 primary 2 sub	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.6
hwIfIpMethod Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an ad…	Enumerationr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.7
hwIpAdEntAddrStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.2.1.1.8

This table lists information about the unnumbered IP address of the interface that borrows an IP address from another interface.
You can create, delete, and view information about the borrowed IP address of an interface.

hwIfIpUnnumberedEntry row .1.3.6.1.4.1.2011.5.25.41.1.2.2.1

Interface IP address unnumbered configuration

Indexes

No indexes recorded

Column	Syntax	OID
hwUnnumberedIfIndex The index value of the unnumbered interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.2.2.1.1
hwLendIfIndex The index value of the lend interface.	IF-MIBInterfaceIndexr/w Enumerated Values: 1 ethTrunk 2 ipTrunk Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.2.2.1.11
hwLendIpAddr The IP address of the lend interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.2.1.12
hwLendIpAddrNetMask The IP address mask of the lend interface.	SNMPv2-SMIIpAddress Enumerated Values: -1 invalid 1 packetAll 2 sourceDesMac 3 packetUdp 4 packetTcp 5 sourceDesIp 6 sourceMacIpv6 7 sourceIpIpv6 8 sourceIp 9 desIp 10 sourceMac 11 desMac 12 sourcePort 13 desPort 14 sourceDesPort 15 fwdType 16 qos 17 labelNum 18 label 19 enhanced 20 l4 21 roundRobin 22 resilient 23 dynProfile Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.2.1.13
hwUnnumberedRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.2.2.1.51

This table contains addressing information relevant to the
entity's interfaces.

hwIfIpAddrEntry row .1.3.6.1.4.1.2011.5.25.41.1.2.3.1

Interface IP address configuration

Indexes

No indexes recorded

Column	Syntax	OID
hwIfIpAddrEntIfIndex The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB…	IF-MIBInterfaceIndex Enumerated Values: -1 invalid 1 masterBackup 2 normalMode 3 lacpMode 4 lacpCompatibleMode 5 portStandbyMode Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.1
hwIfIpAddrEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Enumerated Values: -1 invalid 1 generalMode 2 initialization 3 masterWorking 4 backupWorking Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.2
hwIfIpAddrEntType The type of address.	Enumeration Enumerated Values: -1 invalid 1 generalMode 2 autoRecover	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.3
hwIfIpAddrEntPrefix The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.	SNMPv2-SMIIpAddress Enumerated Values: -1 invalid 1 enabled 2 disabled Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.4
hwIfIpAddrEntOrigin Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an ad…	Enumeration Constraints: range: -1-180	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.5
hwIfIpAddrEntStatus The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).	Enumeration Enumerated Values: -1 invalid 1 fast 2 slow	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.6
hwIfIpAddrEntCreated The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Enumerated Values: -1 invalid 1 enabled 2 disabled Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.7
hwIfIpAddrEntLastChanged The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Constraints: range: -1-4094 Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.8
hwIfIpAddrEntBcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones br…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.9
hwIfIpAddrEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface.	Integer32 Enumerated Values: -1 invalid 1 enabled	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.10
hwIfIpAddrEntAddrType The flag indicates whether the IP address is primary IP address.	HwIpAddressType Enumerated Values: -1 invalid 1 reset 2 ready	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.11
hwIfIpAddrEntVpn The vpn name of ip address.The public address does not have any value.	OctetString	.1.3.6.1.4.1.2011.5.25.41.1.2.3.1.12

hwTrunkIfID uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk interface.

hwTrunkIfEntry row .1.3.6.1.4.1.2011.5.25.41.1.3.3.1

Entries of the trunk table.

Indexes

No indexes recorded

Column	Syntax	OID
hwTrunkIndex The value of this object identifies the index of a trunk interface. The currently supported value ranges from 0 to 511.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1
hwTrunkIfID The identification of the Trunk interface. It may identify Trunk and is an index of the interface.	SNMPv2-SMIInteger32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2
hwTrunkIfType The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3
hwTrunkIfIndex Index number of the Trunk interface, it is consistent with ifIndex of ifTable in IF-MIB.	IF-MIBInterfaceIndex Enumerated Values: -1 invalid 1 yes 2 no Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4
hwTrunkIfModel Participated model of interface load. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic.	Enumerationr/w Enumerated Values: -1 invalid 1 yes 2 no	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5
hwTrunkIfBandWidthAffectLinkNum The value of this object identifies the maximum number of trunk interfaces that can be created. By default, the maximum number of trunk interfaces that can be created is 32. This entry can be set only on a Layer 2 inter…	SNMPv2-SMIInteger32r/w Enumerated Values: 1 enable 2 disable Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6
hwTrunkIfMinLinkNum The value of this object identifies the minimum number of trunk interfaces that can be created. The currently supported value ranges from 1 to 32. By default, the minimum number of trunk interfaces that can be created i…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7
hwTrunkIfRowStatus Current operation status of the row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8
hwTrunkIfWorkingMode The value of this object identifies the working mode of an Eth-Trunk interface. 1: master/backup access mode 2: normal mode 3: static LACP mode 4: compatible LACP mode 5: backup interface mode	Enumerationr/w Enumerated Values: -1 invalid 1 yes 2 no	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9
hwTrunkIfWorkingState Current working state of backup-access trunk. 1: general mode working state 2: initialization 3: master working 4: backup working	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10
hwTrunkIfAutoRecover If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto-recover	Enumerationr/w Constraints: range: -1-30	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11
hwTrunkIfPreemptEnable This object indicates whether LACP priority preemption in static mode is enabled. By default, this function is not enabled.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12
hwTrunkIfPreemptDelay The value of this object identifies the delay for LACP priority preemption in static mode. You can set this object only after hwTrunkIfPreemptEnable is enabled. The value ranges from 10 to 180, in seconds. The default v…	Integer32r/w Constraints: range: 0-0 range: 3-90	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13
hwTrunkIfTimeoutReceive The value of this object identifies the timeout period for receiving LACPDUs on an interface in static LACP mode. The value can be: fast: specifies the timeout period for receiving packets to be 3s. slow: specifies the…	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14
hwTrunkIfFlushSendEnable Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send SmartLink FlushDUs so as to delete the re…	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15
hwTrunkIfFlushVlanId The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16
hwTrunkIfFlushPasswd A 16-octet read-create value used to define the password for negotiation.	SnmpPasswdStringr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17
hwTrunkIfForceSwitchEnable It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. However, if the master link is down, the oper…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18
hwTrunkIfStatReset Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk.	Enumerationr/w Enumerated Values: -1 invalid 1 trunkSelected 2 trunkDeselected 3 trunkIndep	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19
hwTrunkBandwidth Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20
hwTrunkIfArpSendSpeed Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21
hwTrunkIfLagSelectedPortStd This object indicates the port selection standard of LACP: based either on the port rate or on the port priority. By default, LACP selects ports based on the port priority. speed(1),priority(2). If LACP is not configur…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22
hwTrunkIfLagMaxActiveLinkNum The value of this object identifies the upper threshold of interfaces that can be selected by the Eth-Trunk in static mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23
hwTrunkETrunkPriority The priority of the E-Trunk.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24
hwTrunkETrunkSysID The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25
hwTrunkETrunkPriorityReset Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26
hwTrunkETrunkSysIDReset Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted.	Enumerationr/w Enumerated Values: -1 invalid 1 portSlave 2 portMaster	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27
hwTrunkLocalPrefMode Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1).	Enumerationr/w Constraints: range: -1-65535	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28
hwTrunkIfTrackVrrpVrid The VRID which the static mode Eth-trunk tracked to.	SNMPv2-SMIInteger32r/w Enumerated Values: -1 invalid 1 reset 2 ready Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29
hwTrunkIfTrackVrrpIfIndex The VRRP interface which the static mode Eth-trunk tracked to.	IF-MIBInterfaceIndexr/w Enumerated Values: 1 invalid 2 active 3 passive Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30
hwTrunkIfTrackVrrpReset Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is that the Eth-Trunk interface in static L…	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31
hwTrunkIfBackupPreemptEnable The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32
hwTrunkIfBackupPreemptDelay The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hw…	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33
hwTrunkIfCrcErrorSwitchEnable make trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is low	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.34
hwTrunkIfLagTimeOut The expired time(Unit is second) of the port to receive LACPDUS in the fast mode. The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in the fast mode. The default value is cust…	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.35
hwTrunkMemCount The count of Trunk member interfaces per Trunk.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.36

hwTrunkMemifIndex uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk members.

hwTrunkMemEntry row .1.3.6.1.4.1.2011.5.25.41.1.4.1.1

Trunk member attribute information

Indexes

No indexes recorded

Column	Syntax	OID
hwTrunkMemifIndex The value of this object identifies the index of a trunk member interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.1
hwTrunkValidEntry The value of this object identifies the valid flag in the trunk. If the trunk has member interfaces added, the return value is valid(1).	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.2
hwTrunkSelectStatus The value of this object identifies the status of a trunk. trunkSelected: A trunk member interface in this state can both forward data and receive LACPDUs from a remote device. trunkDeselected: A trunk member interface …	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.3
hwTrunkLacpStatus This object indicates the LACP status. enabled: An Eth-Trunk interface works in static LACP mode. disabled: An Eth-Trunk interface does not work in static LACP mode.	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.4
hwTrunkDeleteFlag Flag is set trunk_del_enable(1) or trunk_del_disable(2), according to operation.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.5
hwTrunkOperstatus Status of operation, indicates port status. There are trunk_up(1) and trunk_down(2). It expresses whether port is shutdown.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.6
hwTrunkIsDefaultLagRecv We don't sustain now, default value is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.7
hwTrunkPortWeight The value of this object identifies the weight of a trunk member interface. The default weight of a Trunk member interface is 1. The sum weight of all member interfaces of a trunk cannot exceed the maximum number of mem…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.8
hwTrunkPortStandby The value is backup of Trunk Port.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.9
hwTrunkRowStatus Current operation status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.10
hwTrunkPortMaster Master port of backup-access eth-trunk or not 1: port-slave 2: port-master	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.11
hwTrunkPortPriority The priority value assigned to this Trunk Port. This 16-bit value is read-write.	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.12
hwTrunkPortStatReset This object indicates resetting LACPDU statistics on an interface. This object applies only to Eth-Trunk interfaces in static LACP mode. For Eth-Trunk interfaces in other modes, the return value is fixed at -1.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.13
hwTrunkPortLacpMode The mode of port joining Lacp.	Enumerationr/w Enumerated Values: 1 reset 2 ready	.1.3.6.1.4.1.2011.5.25.41.1.4.1.1.14

This table describes attributes of Ethernet interfaces.

hwIfEtherStatEntry row .1.3.6.1.4.1.2011.5.25.41.1.6.1.1

Entry of Ethernet Interface Statistic Table

Indexes

No indexes recorded

Column	Syntax	OID
hwIfEtherStatIfIndex This object indicates the index of a Layer 2 interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.1
hwIfEtherStatInPkts64Octets This object indicates the number of received data packets each with a length less than or equal to 64 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5
hwIfEtherStatInPkts65to127Octets This object indicates the number of received data packets each with a length ranging from 65 bytes to 127 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6
hwIfEtherStatInPkts128to255Octets This object indicates the number of received data packets each with a length ranging from 128 bytes to 255 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7
hwIfEtherStatInPkts256to511Octets This object indicates the number of received data packets each with a length ranging from 256 bytes to 511 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8
hwIfEtherStatInPkts512to1023Octets This object indicates the number of received data packets each with a length ranging from 512 bytes to 1023 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9
hwIfEtherStatInPkts1024to1518Octets This object indicates the number of received data packets each with a length ranging from 1024 bytes to 1518 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10
hwIfEtherStatInJumboPkts This object indicates the number of received data packets each with a length greater than 1518 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.11
hwIfEtherStatInCRCPkts This object indicates the number of packets experiencing the CRC error check.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.12
hwIfEtherStatInLongPkts This object indicates the number of packets each with a length greater than the maximum length.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.13
hwIfEtherStatInJabberPkts This object indicates the number of packets each with a length greater than the maximum length and experiencing the CRC error check.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.14
hwIfEtherStatInFragmentPkts This object indicates the number of data packets each with a length shorter than 64 bytes and experiencing the CRC error check.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.15
hwIfEtherStatInUnderSizePkts This object indicates the number of data packets each with a length shorter than 64 bytes and without experiencing the CRC error check.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.16
hwIfEtherStatInOverRunPkts This object indicates the number of received data packets with FIFO overflow errors.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.17
hwIfEtherStatInPausePkts This object indicates the number of received control frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.18
hwIfEtherStatOutJumboPkts This object indicates the number of sent packets each with a length greater than 1518 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.19
hwIfEtherStatOutOverflowPkts This object indicates the number of sent data packets with FIFO overflow errors.	SNMPv2-SMICounter64 Enumerated Values: 1 reset 2 ready Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.20
hwIfEtherStatOutUnderRunPkts This object indicates the number of data packets with an empty FIFO.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.21
hwIfEtherStatOutPausePkts This object indicates the number of sent control frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.22
hwIfEthIfStatReset Reset the Statistic information Counter	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.23
hwIfEtherStatInDropEventPkts The number of received Packets discarded for GBP full or back pressure discard	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.24
hwIfEtherStatInAlignmentPkts This object indicates the number of received packets with error headers.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.25
hwIfEtherStatInSymbolPkts This object indicates the number of received unknown packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.26
hwIfEtherStatInIgnoredPkts The number of received MAC control frames which have unknown opecode	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.27
hwIfEtherStatInFramePkts The number of received frames whose actual length differs with 802.3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.28
hwIfEtherStatOutCollisionPkts The number of sended collision Frames(only happen in the 10/100M port with half duplex mode)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.29
hwIfEtherStatOutDeferredPkts The number of sended deferred but not collision Frames(only happen in the 10/100M port)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.30
hwIfEtherStatOutLateCollisionPkts The number of sended deferred and collision Frames(only happen in the 10/100M port)	SNMPv2-SMICounter64 Enumerated Values: 1 reset 2 ready Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.31
hwIfEtherStatOutExcessiveCollisionPkts The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.32
hwIfEtherStatOutBufferPurgationPkts The number of sent Frames which is purged from the buffer because of long time	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.1.1.33

This table describes attributes of SDH interfaces.

hwIfSdhStatEntry row .1.3.6.1.4.1.2011.5.25.41.1.6.2.1

Entry of Sdh/Sonet Interface Statistic Table

Indexes

No indexes recorded

Column	Syntax	OID
hwIfSdhStatIfIndex This object indicates the SDH interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.1
hwIfSdhStatInCRCPkts This object indicates the number of CRC errors in received packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.2
hwIfSdhStatInShortPkts This object indicates the number of received packets with the length less than the minimum length allowed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.3
hwIfSdhStatInLongPkts This object indicates the number of received packets with the length greater than the maximum length allowed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.4
hwIfSdhStatOutOverRunPkts This object indicates the number of sent packets with overflow errors.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.5
hwIfSdhStatOutUnderRunPkts This object indicates the number of sent packets with underrun errors.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.6
hwIfSdhIfStatReset Reset the Statistic information Counter	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.7
hwIfSdhStatInOverRunPkts The number of received Packets whose queue overflow	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.2.1.8

This table contains ATM interface attributes.

hwIfAtmStatEntry row .1.3.6.1.4.1.2011.5.25.41.1.6.3.1

Entry of Atm Interface Statistic Table

Indexes

No indexes recorded

Column	Syntax	OID
hwIfAtmStatIfIndex This object indicates the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.1
hwIfAtmStatInGoodCells This object indicates the number of received normal cells.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.2
hwIfAtmStatInIdleCells This object indicates the number of received idle cells.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.3
hwIfAtmStatInCorrectedCells This object indicates the number of received corrected cells.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.4
hwIfAtmStatInUncorrectedCells This object indicates the number of received cells that cannot be corrected.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.5
hwIfAtmStatOutGoodCells This object indicates the number of sent normal cells.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.6
hwIfAtmStatOutIdleCells This object indicates the number of sent idle cells.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.7
hwIfAtmIfStatReset This object indicates the resetting of the counter.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.6.3.1.8

Serial Interface Statistic Table for PPP/HDLC

hwIfPPPHDLCStatEntry row .1.3.6.1.4.1.2011.5.25.41.1.6.4.1

This table describes PPP or HDLC interface statistics.

Indexes

No indexes recorded

Column	Syntax	OID
hwIfPPPHDLCStatIfIndex This object indicates the serial interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.6.4.1.1
hwIfPPPHDLCStatInCRCPkts This object indicates the number of received data packets that experience a CRC check.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.4.1.2
hwIfPPPHDLCStatInShortPkts This object indicates the number of received data packets with each length less than the minimum length of 1 byte.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.4.1.3
hwIfPPPHDLCStatInLongPkts This object indicates the number of received data packets with each length greater than the maximum length of 2036 bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.4.1.4

Interface Statistic Table for IPv4/IPv6.

hwIfDualStackStatsEntry row .1.3.6.1.4.1.2011.5.25.41.1.6.5.1

An interface statistics entry containing objects for a particular interface and version of IPv4/IPv6.

Indexes

No indexes recorded

Column	Syntax	OID
hwIfDualStackStatsIPVersion The IP version of this row.	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.1
hwIfDualStackStatsIfIndex The index value that uniquely identifies the interface to which this entry is applicable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.2
hwIfDualStackStatsInReceives The total number of IPv4/IPv6 datagrams received, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.3
hwIfDualStackStatsInOctets The total number of octets in received IPv4/IPv6 datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.4
hwIfDualStackStatsOutTransmits The total number of IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.5
hwIfDualStackStatsOutOctets The total number of octets in IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.6
hwIfDualStatckStatsInUcastPkts The total number of IPv4/IPv6 unicast datagrams received, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.7
hwIfDualStatckStatsInUcastOctets The total number of octets received in IPv4/IPv6 unicast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.8
hwIfDualStatckStatsInMcastPkts The total number of IPv4/IPv6 multicast datagrams received, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.9
hwIfDualStatckStatsInMcastOctets The total number of octets received in IPv4/IPv6 multicast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.10
hwIfDualStatckStatsInBcastPkts The total number of IPv4/IPv6 broadcast datagrams received, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 1-100	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.11
hwIfDualStatckStatsInBcastOctets The total number of octets received in IPv4/IPv6 broadcast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.12
hwIfDualStatckStatsOutUcastPkts The total number of IPv4/IPv6 unicast datagrams transmitted, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 1-100	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.13
hwIfDualStatckStatsOutUcastOctets The total number of octets transmitted in IPv4/IPv6 unicast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.14
hwIfDualStatckStatsOutMcastPkts The total number of IPv4/IPv6 multicast datagrams transmitted, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.15
hwIfDualStatckStatsOutMcastOctets The total number of octets transmitted in IPv4/IPv6 multicast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.16
hwIfDualStatckStatsOutBcastPkts The total number of IPv4/IPv6 broadcast datagrams transmitted, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.17
hwIfDualStatckStatsOutBcastOctets The total number of octets transmitted in IPv4/IPv6 broadcast datagrams, including those received on the interface's sub-interfaces.	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.18
hwIfDualStackStatsInPktRate The rate of IPv4/IPv6 datagrams received, including those received on the interface's sub-interfaces.Unit:packets/s	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.19
hwIfDualStackStatsInOctetRate The rate of octets in received IPv4/IPv6 datagrams, including those received on the interface's sub-interfaces.Unit:octets/s	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.20
hwIfDualStackStatsOutPktRate The rate of IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces.Unit:packets/s.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.21
hwIfDualStackStatsOutOctetRate The rate of octets in IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces.Unit:octets/s.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.6.5.1.22

Alarm monitor table

hwIfMonitorThresholdEntry row .1.3.6.1.4.1.2011.5.25.41.1.7.1.1

Entry of alarm monitor table

Indexes

No indexes recorded

Column	Syntax	OID
hwIfMonitorIndex Index of alarm monitor table	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.1
hwIfMonitorCrcErrorStatistics Crc error statistics value	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.2
hwIfMonitorCrcErrorThreshold Crc error alarm threshold,default value is 3 and 0 is an invalid value	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.3
hwIfMonitorCrcErrorInterval Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.4
hwIfMonitorSdhErrorStatistics Sdh error statistics value only for B3	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.5
hwIfMonitorSdhErrorThreshold Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.6
hwIfMonitorSdhErrorInterval Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.7
hwIfMonitorInputRate Input rate percentage value	Integer32	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.8
hwIfMonitorInputRateThreshold Input rate alarm threshold,default value is 100	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.9
hwIfMonitorOutputRate Output rate percentage value	Integer32	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10
hwIfMonitorOutputRateThreshold Output rate alarm threshold,default value is 100	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.11
hwIfMonitorPauseFrameStatistics Pause frame statistics value	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.12
hwIfMonitorPauseFrameThreshold Pause frame alarm threshold,and 0 is an invalid value	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.13
hwIfMonitorPauseFrameInterval Pause frame alarm interval time(unit is second),and 0 is an invalid value	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.14
hwIfMonitorDelayValue Delay value	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.15
hwIfMonitorDelayThreshold Delay alarm threshold	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.16
hwIfMonitorJitterValue Jitter value	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.17
hwIfMonitorJitterThreshold Jitter alarm threshold	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.18
hwIfMonitorName Interface's name of alarm monitor table	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19
hwIfMonitorSdhB1ErrorStatistics Sdh B1 error statistics value	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.20
hwIfMonitorSdhB1ErrorThreshold Sdh B1 error alarm threshold,default value is 3	Integer32r/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.21
hwIfMonitorSdhB1ErrorInterval Sdh B1 error alarm interval time(unit is second),default value is 10s	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.22
hwIfMonitorSdhB2ErrorStatistics Sdh B2 error statistics value	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.23
hwIfMonitorSdhB2ErrorThreshold Sdh error B2 alarm threshold,default value is 3	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.24
hwIfMonitorSdhB2ErrorInterval Sdh B2 error alarm interval time(unit is second),default value is 10s	Integer32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.25
hwIfMonitorSymbolErrorStatistics Symbol error statistics value	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.26
hwIfMonitorSymbolErrorThreshold Symbol error alarm threshold,default value is 3	Unsigned32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.27
hwIfMonitorSymbolErrorInterval Symbol error alarm interval time(unit is second),default value is 10s	Integer32r/w Enumerated Values: 1 broadcastSuppression 2 multicastSuppression 3 unknownUnicastSuppression	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.28
hwIfMonitorAllStatistics All statistics value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.29
hwIfMonitorBadBytesErrorStatistics Description.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40
hwIfMonitorBadBytesErrorThreshold Description.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41
hwIfMonitorBadBytesErrorInterval Description.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42
hwIfMonitorTxPauseFrameStatistics TX pause frame statistics value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.43
hwIfMonitorTxPauseFrameHighThreshold TX pause frame high threshold, and 0 is an invalid value.	Unsigned32r/w	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.44
hwIfMonitorTxPauseFrameLowThreshold TX pause frame low threshold, and 0 is an invalid value.	Unsigned32r/w Enumerated Values: 1 pipe 2 uniform 3 shortpipe 4 egresspipe 5 egressshortpipe 6 egressShortpipeTrustInnerVlan8021p 7 egressShortpipeTrustIpDscp	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.45
hwIfMonitorTxPauseFrameInterval TX pause frame alarm interval time(unit is second), and 0 is an invalid value.	Integer32r/w Enumerated Values: 0 default 1 be 2 af1 3 af2 4 af3 5 af4 6 ef 7 cs6 8 cs7	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.46
hwIfMonitorPostFECErrorStatistics Post fec error corrected value.	SNMPv2-SMICounter64 Enumerated Values: 0 default 1 green 2 yellow 3 red Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.41.1.7.1.1.47

The interface bound to VRRP table.

hwAdminVrrpMemberIfEntry row .1.3.6.1.4.1.2011.5.25.41.1.9.2.1

Entries of the interface bound to VRRP table.

Indexes

hwIfName

Column	Syntax	OID
hwAdminVrrpMemberIfIndexobsolete The number of the interface.	IF-MIBInterfaceIndex Constraints: range: 1-47 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.9.2.1.1
hwAdminVrrpVridobsolete The administrator VRRP vrid.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.9.2.1.2
hwAdminVrrpIfIndexobsolete The administrator VRRP's configure interface index.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.9.2.1.3
hwAdminVrrpMemberIfFlowStatusobsolete Current flow status of interface. 1:up 2:down	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.9.2.1.4
hwAdminVrrpMemberIfRowStatusobsolete Current operation status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.9.2.1.5

Flux limit table

hwIfFluxLimitEntry row .1.3.6.1.4.1.2011.5.25.41.1.10.1.1

Entry of flux limit table

Indexes

No indexes recorded

Column	Syntax	OID
hwIfFluxIfIndex Interface Index, same as ifIndex.	IF-MIBInterfaceIndex Constraints: range: 1-64 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.1
hwIfFluxVlanId Vlan ID. 0 is the default value	Q-BRIDGE-MIBVlanIdOrNone Enumerated Values: 1 p2p 2 p2mp 3 l2subif 255 none Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.2
hwIfFluxDirection Limit direction: inbound (1) outbound (2)	HWDirectionTyper/w Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.3
hwIfFluxLimitType Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3).	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.4
hwIfFluxCir Committed Information Rate. Unit: kbps. software QoS: 8..155000 hardware QoS: 100..10000000	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.5
hwIfFluxCbs Committed Burst Size. Unit: byte software QoS: 1875..19375000 hardware QoS: 64..33554432	SNMPv2-SMIInteger32r/w Enumerated Values: 1 ve 8 imaGroup 11 tunnel 13 mpGroup 16 dslGroup Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.6
hwIfFluxRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Constraints: range: 1-2 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.10.1.1.7

The table describes the different service mode of interfaces.

hwIfDiffServEntry row .1.3.6.1.4.1.2011.5.25.41.1.11.1.1

Interface different service mode attribute configuration.

Indexes

No indexes recorded

Column	Syntax	OID
hwIfDiffServIndex The index of L2 interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.11.1.1.1
hwIfDiffServMode Different service mode of the interface binding to a VLL, default is uniform.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.11.1.1.2
hwIfDiffServServiceClass PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.11.1.1.3
hwIfDiffServColor Remarked color of packet in the ingress PE, the value must be green,yellow,red.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.11.1.1.4

This table describes interface index information obtained based on the interface name. Currently, this table supports only the query function.

hwIfQueryEntry row .1.3.6.1.4.1.2011.5.25.41.1.12.1.1

Entries of private interface name table.

Indexes

No indexes recorded

Column	Syntax	OID
hwIfName This object indicates an interface name.	OctetString	.1.3.6.1.4.1.2011.5.25.41.1.12.1.1.1
hwIfIndex The value of this object identifies the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.41.1.12.1.1.2

This table describes how to create, delete, and display logical interfaces and sub-interfaces.

hwLogicIfEntry row .1.3.6.1.4.1.2011.5.25.41.1.13.1.1

Logic interface table.

Indexes

No indexes recorded

Column	Syntax	OID
hwLogicIfIndex Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.1
hwLogicIfMainIndex Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.11
hwLogicIfType Indicates the interface type.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.12
hwLogicIfName Indicates the interface name. The interface name must be a name without blank spaces and Tab characters.	OctetStringr/w	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.13
hwLogicIfParaOne This object indicates the extension parameter of a logical interface. The default value is p2mp. For other interfaces, this object returns none after the get operation.	Enumerationr/w	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.14
hwLogicIfRowStatus Indicates the status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.41.1.13.1.1.51

Logic interface help table.

hwLogicIfHelpEntry row .1.3.6.1.4.1.2011.5.25.41.1.13.2.1

Logic interface help table.

Indexes

No indexes recorded

Column	Syntax	OID
hwLogicIfhelpType Indicates the types of logical interfaces that can be queried.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.1
hwLogicIfChassisNumber Indicates the ID of the chassis that supports the creation of the specified logical interface.	OctetString	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.2
hwLogicIfSlotNumber Indicates the ID of the slot that supports the creation of the specified logical interface.	OctetString	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.3
hwLogicIfCardNumber Indicates the number of the card that supports the creation of the specified logical interface.	OctetString	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.4
hwLogicIfMin Indicates the minimum port number of the specified logical interface.	SNMPv2-SMIInteger32 Enumerated Values: 1 reset 2 unreset Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.5
hwLogicIfMax Indicates the maximum port number of the specified logical interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.6
hwLogicIfTotal Indicates the maximum number of the specified logical interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.2.1.7

Logic interface dynamic help table.

hwLogicIfDynamicHelpEntry row .1.3.6.1.4.1.2011.5.25.41.1.13.3.1

Logic interface dynamic help table.

Indexes

No indexes recorded

Column	Syntax	OID
hwLogicDynamicIfhelpType Indicates the types of logical interfaces that can be queried.	Enumeration	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.1
hwLogicDynamicIfChassisNumber Indicates the ID of the chassis that that can be queried.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.2
hwLogicDynamicIfSlotNumber Indicates the ID of the slot that can be queried.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.3
hwLogicDynamicIfCardNumber Indicates the ID of the card that can be queried.	SNMPv2-SMIInteger32 Enumerated Values: 1 reset 2 unreset Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.4
hwLogicDynamicIfMin Indicates the minimum port number of the specified logical interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.5
hwLogicDynamicIfMax Indicates the maximum port number of the specified logical interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.6
hwLogicDynamicIfTotal Indicates the maximum number of the specified logical interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.41.1.13.3.1.7