HUAWEI-EVPN-MIB

        This object indicates EVPN management information.
    
Source file
HUAWEI-EVPN-MIB
Last revised
Identity
hwEvpnMib
Base OID
1.3.6.1.4.1.2011.5.25.356.1
Imported Objects
HUAWEI-MIB hwDatacomm
INET-ADDRESS-MIB InetAddress
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-EVPN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-EVPN-MIB::hwEvpnMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-EVPN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-EVPN-MIB::hwEvpnMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (32)
.1.3.6.1.4.1.2011.5.25.356
.1.3.6.1.4.1.2011.5.25.356.1
.1.3.6.1.4.1.2011.5.25.356.1.1
.1.3.6.1.4.1.2011.5.25.356.1.1.1
.1.3.6.1.4.1.2011.5.25.356.1.1.1.1
.1.3.6.1.4.1.2011.5.25.356.1.1.1.1.1
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.1.1.1.1
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.1.1.1.2
.1.3.6.1.4.1.2011.5.25.356.1.1.2
.1.3.6.1.4.1.2011.5.25.356.1.1.3
.1.3.6.1.4.1.2011.5.25.356.1.1.3.1
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.10
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.11
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.12
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.13
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.14
.1.3.6.1.4.1.2011.5.25.356.1.1.3.15
.1.3.6.1.4.1.2011.5.25.356.1.1.3.16
.1.3.6.1.4.1.2011.5.25.356.1.1.3.17
.1.3.6.1.4.1.2011.5.25.356.1.1.3.18
.1.3.6.1.4.1.2011.5.25.356.1.1.3.19
.1.3.6.1.4.1.2011.5.25.356.1.1.3.2
.1.3.6.1.4.1.2011.5.25.356.1.1.3.3
Enumeration
.1.3.6.1.4.1.2011.5.25.356.1.1.3.4
OctetString
.1.3.6.1.4.1.2011.5.25.356.1.1.3.5
.1.3.6.1.4.1.2011.5.25.356.1.1.3.6
.1.3.6.1.4.1.2011.5.25.356.1.1.3.7
.1.3.6.1.4.1.2011.5.25.356.1.1.3.8
.1.3.6.1.4.1.2011.5.25.356.1.1.3.9
.1.3.6.1.4.1.2011.5.25.356.1.2
.1.3.6.1.4.1.2011.5.25.356.1.2.1
.1.3.6.1.4.1.2011.5.25.356.1.2.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. HUAWEI-MIBhuawei
  3. SNMPv2-TCrfc
  4. INET-ADDRESS-MIBrfc
  5. SNMPv2-CONFrfc
  6. HUAWEI-EVPN-MIBhuaweiselected
Conformance Groups (13)
This object indicates an EVPN instance group, which is used for a MAC duplication suppression alarm.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.1
This object indicates a MAC duplication suppression alarm group, which is used to prompt an alarm or clear the alarm.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.2
This object indicates an error configuration alarm group, which is used to prompt an alarm in EVPN E-Tree scenarios.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.3
This object indicates the minimum length of the ARG group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.4
This object indicates the minimum length of the ARG notification group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.5
This object indicates an EVPL instance state group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.6
This object indicates an EVPL instance state group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.7
This object indicates the route of EVPN instance discarding group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.8
This object indicates the route of EVPN instance discarding notification group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.9
This object indicates the ring-id and router-id of the ring-id conflict group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.10
This object indicates a ring-id conflict alarm group, which is used to prompt an alarm or clear the alarm.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.11
This object indicates a EVPN qualify BUM table res alarm group, which is used to prompt an alarm or clear the alarm.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.12
This object indicates the upper limit value of the EVPN qualify BUM resource group.
.1.3.6.1.4.1.2011.5.25.356.1.2.2.13
Compliance Statements (1)
Notifications / Traps (13)
NameOIDDescription
.1.3.6.1.4.1.2011.5.25.356.1.1.2.1
This object indicates that an EVPN instance name is used to report an alarm when a MAC address is suppressed in the EVPN instance.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.10
This object indicates that the number of EVPN qualify BUM resources reached the upper limit.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.11
This object indicates that the number of EVPN qualify BUM resources returned to normal.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.12
The SNMP alarm trap that is generated when an EVPL instance status change to down.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.13
The SNMP alarm trap that is generated when an EVPL instance status change to up.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.2
This object indicates that an EVPN instance name is used to clear an alarm when all MAC addresses are unsuppressed in the EVPN instance.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.3
This object indicates that an EVPN instance name is used to report an alarm for leaf attribute difference between AC interfaces bound to an EVPN instance in an EVPN E-Tree dual-homing scenario.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.4
This object indicates that the minimum length of the ARG is changed, split horizon function may fail temporarily.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.5
The SNMP trap that is generated when an EVPL instance status change to down.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.6
The SNMP trap that is generated when an EVPL instance status change to up.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.7
This object indicates that The EVPN instance discards newly learned MAC, MAC/IP, IMET, and Ethernet A-D per-EVI routes.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.8
This object indicates that the number of peers with the same ring-id exceeded the upper limit.
.1.3.6.1.4.1.2011.5.25.356.1.1.2.9
This object indicates that the number of peers with the same ring-id not exceeded the upper limit.