HUAWEI-ETHERNET-OPTICMODULE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

199

hwOpticsModuleInformationTable

table

.1.3.6.1.4.1.2011.5.14.6.1 · 1 row entry · 41 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsModuleInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsModuleInformationTable'

Indicates the optical module table of an Ethernet port. It is used for querying
the information about the optical module of an Ethernet port.
The index of this table is ifIndex.

hwOpticsModuleInformationEntry row .1.3.6.1.4.1.2011.5.14.6.1.1

Indicates the optical module table of an Ethernet port. It is used for querying
the information about the optical module of an Ethernet port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwOpticsMDIdentifier

Indicate the identifier of optical module.
Options:
1. unknown(1) -unknown the identifier of optical module
2. gbic(2) -the identifier of optical module is gbic
3. soldered…

Enumeration

Enumerated Values:

1	unknown
2	gbic
3	solderedToMotherboard
4	sfp
5	pin300XBI
6	xenpak
7	xfp
8	xff
9	xfpe
10	xpak
11	x2
12	dwdmSfp
13	qSfp
14	qSfpPlus
18	qSfp28
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.1

hwOpticsMDExtID

Indicate the extended type of optical module.
Options:
1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant
2. moddef1(2) -the extended type of opti…

Enumeration

Enumerated Values:

1	notSpecifiedOrNotCompliant
2	moddef1
3	moddef2
4	moddef3
5	bySerialIDOnly
6	moddef5
7	moddef6
8	moddef7
9	powerClass1
10	powerClass2
11	powerClass3
12	powerClass4
13	powerClass5
14	powerClass6
15	powerClass7
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.2

hwOpticsMDConnector

Indicate the type of optical module connector.
Options:
1. unknown(1) -unknown the type of optical module connector
2. sc(2) -the type of optical module connector is sc
3. copperConnec…

Enumeration

Enumerated Values:

1	unknown
2	sc
3	copperConnector1
4	copperConnector2
5	bnctnc
6	coaxialHeaders
7	fiberJack
8	lc
9	mtrj
10	mu
11	sg
12	opticalPigtail
13	hssdcii
14	copperPigtail
15	vendorSpecific
16	mpoParallelOptic
17	rj45
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.3

hwOpticsMDEncoding

Indicate the encoding mechanism.
Options:
1. unspecified(1) -the encoding mechanism is unspecified
2. encodingMethod8B10B(2) -the encoding mechanism is encodingMethod8B10B
3. encodingMethod4B5B(3) -the…

Enumeration

Enumerated Values:

1	unspecified
2	encodingMethod8B10B
3	encodingMethod4B5B
4	nrz
5	manchester
6	sONETScrambled
7	encodingMethod64B66B
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.4

hwOpticsMDBrNominal

Nominal bit rate.
Unit: 100 MBits/sec

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.5

hwOpticsMDLength9Micronkm

Indicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
The maximum value is 255, which means that the transceiver sup…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.6

hwOpticsMDLength9Micron

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.7

hwOpticsMDLength50Micron

Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km]
fiber.
The maximum value is 255, which means that the transce…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.8

hwOpticsMDLength62Micron5

Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km]
fiber.
The maximum value is 255, which means that the tran…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.9

hwOpticsMDLengthCopper

Indicate Link length supported for copper.
Unit: 1m

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.10

hwOpticsMDVendorName

Indicate the vendor name of a optical module.

OctetString

Constraints:
range: 0-17

.1.3.6.1.4.1.2011.5.14.6.1.1.11

hwOpticsMDVendorOUI

Indicate the vendor IEEE company ID of a optical module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.12

hwOpticsMDVendorPN

Indicate the part number of a optical module provided by vendor.

OctetString

Constraints:
range: 0-17

.1.3.6.1.4.1.2011.5.14.6.1.1.13

hwOpticsMDVendorRev

Indicate the revision level for part number provided by vendor.

OctetString

Constraints:
range: 0-5

.1.3.6.1.4.1.2011.5.14.6.1.1.14

hwOpticsMDWaveLength

The laser wavelength.
Unit: 1nm

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.15

hwOpticsMDCcBase

The check code for base ID fields(one byte).

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.16

hwOpticsMDOptions

Options:
1. rateSelect(1) -RATE_SELECT is implemented
2. txDisableAndTheSerialOutputDisabled(2) -TX_DISABLE is implemented and disables the serial output.
3. txFa…

Enumeration

Enumerated Values:

1	rateSelect
2	txDisableAndTheSerialOutputDisabled
3	txFault
4	signalLossAndInvertedFromStandard
5	signalLossAndAsDefined
6	tunabletransmittertechnology
7	rdt
65535	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.17

hwOpticsMDBrMax

The upper bit rate margin.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.18

hwOpticsMDBrMin

The lower bit rate margin.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.19

hwOpticsMDVendorSN

The serial number of a optical module provided by vendor.

OctetString

Constraints:
range: 0-17

.1.3.6.1.4.1.2011.5.14.6.1.1.20

hwOpticsMDDateCode

The date code of a optical module.

OctetString

Constraints:
range: 0-9

.1.3.6.1.4.1.2011.5.14.6.1.1.21

hwOpticsMDDiagnosticMonitoringType

Indicate the diagnostic monitoring type.
Options:
1. internallyCalibrated(1) -the diagnostic monitoring type is internallyCalibrated
2. externallyCalibrated(2) -the diagnostic monitoring type is externallyCalibrate…

Enumeration

Enumerated Values:

-1	invalid
1	internallyCalibrated
2	externallyCalibrated

.1.3.6.1.4.1.2011.5.14.6.1.1.22

hwOpticsMDEnhancedOptions

Indicate enhanced Options.
Options:
1. forAllMonitoredQuantities(1) -optional Alarm/warning flags implemented for all monitored quantities
2. txDisable(2) -optional Soft TX_DISABLE control and monitoring…

Enumeration

Enumerated Values:

-1	invalid
1	forAllMonitoredQuantities
2	txDisable
3	txFault
4	rxLOS
5	rateSelect

.1.3.6.1.4.1.2011.5.14.6.1.1.23

hwOpticsMDSFF8472Compliance

Indicate the SFF-8472 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8472V93(2) -includes functionality described in SFF-8472 Rev 9.3.
3. includesSFF8472V95(3) -includes f…

Enumeration

Enumerated Values:

1	undefined
2	includesSFF8472V93
3	includesSFF8472V95
4	includesSFF8472V102
5	includesSFF8472V104
6	includesSFF8472V110
7	tbd
8	includesSFF8472V113
9	includesSFF8472V114
10	includesSFF8472V120
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.24

hwOpticsMDCcExt

Check code for the Extended ID Fields.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.25

hwOpticsMDVendorSpecific

Vendor of Optical module specific information.

OctetString

Constraints:
range: 0-96

.1.3.6.1.4.1.2011.5.14.6.1.1.26

hwOpticsMDCLEICode

CLEI code supported by eSFP. Length is 10 bytes.

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.2011.5.14.6.1.1.27

hwOpticsMDInfoRemote

Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	remote

.1.3.6.1.4.1.2011.5.14.6.1.1.28

hwOpticsMDSFPPulsCableTech

Indicates the cable specification compliance.
Options:
1. passiveCable(1) -Passive Cable
2. activeCable(2) -Active Cable
2. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	passiveCable
2	activeCable

.1.3.6.1.4.1.2011.5.14.6.1.1.29

hwOpticsMDSFPRateId

Indicates the cable specification compliance.
Options:
1. sff8079(1) -Defined for SFF-8079 (4/2/1G Rate_Select & AS0/AS1)
2. sff8431RX(2) -Defined for SFF-8431 (8/4/2G Rx Rate_Select only)
3. sff8431TX(3) …

Enumeration

Enumerated Values:

-1	invalid
1	sff8079
2	sff8431RX
3	sff8431TX
4	sff8431RXTX
5	pcpi5RX
6	fcpi5RXTX
7	fcpi6RXTX
8	rate10G8GRXTX
255	invalid1

.1.3.6.1.4.1.2011.5.14.6.1.1.30

hwOpticsMDLength50MicronOM3

Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [2000MHz*km]
fiber.
The maximum value is 255, which means that the transc…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.31

hwOpticsDwdmClass

Extended identifier: WDM class.
Options:
1. noWdm(1) -no WDM
2. cwdm(2) -CWDM
3. dwdm(3) -DWDM
4. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	noWdm
2	cwdm
3	dwdm

.1.3.6.1.4.1.2011.5.14.6.1.1.32

hwOpticsDwdmPower

Extended identifier: Power level.
Options:
1. dwdmPowerLevel1(1) -The power is lower than 1W.
2. dwdmPowerLevel2(2) -The power is between 1W and 1.5W.
3. dwdmPowerLevel3(3) -The power is higher than 1.5W.
4. inval…

Enumeration

Enumerated Values:

-1	invalid
1	dwdmPowerLevel1
2	dwdmPowerLevel2
3	dwdmPowerLevel3

.1.3.6.1.4.1.2011.5.14.6.1.1.33

hwOpticsDwdmMaxTemperature

Max temperature.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001C

0.000001CSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.34

hwOpticsDwdmMinTemperature

Min temperature.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001C

0.000001CSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.35

hwOpticsDwdmMaxSupplyCurrent

Max supply current.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001A

0.000001ASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.36

hwOpticsDwdmChannelSpacing

Fibre channel spacing.
Options:
1. channelSpacing200G(1) -The fibre channel spacing is 200GHz.
2. channelSpacing100G(2) -The fibre channel spacing is 100GHZ.
3. channelSpacing50G(3) -The…

Enumeration

Enumerated Values:

-1	invalid
1	channelSpacing200G
2	channelSpacing100G
3	channelSpacing50G

.1.3.6.1.4.1.2011.5.14.6.1.1.37

hwOpticsDwdmNumberOfChannels

Number of channels.
Invalid value: -1, returned if the optical module is unavailable or not supported.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.38

hwOpticsDwdmWaveLength

Laser wavelength.
Invalid value: -1, returned if the optical module is unavailable or not supported.
Unit: 0.01nm

0.01nmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.1.1.39

hwOpticsModuleUserEeprom

Optics module user EEPROM information.

OctetString

Constraints:
range: 0-384

.1.3.6.1.4.1.2011.5.14.6.1.1.40

hwOpticsMDSFF8636Compliance

Indicate the SFF-8636 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8436V48OrEarlier(2) -includes functionality described in SFF-8436 Rev 4.8 or earlier.
3. inc…

Enumeration

Enumerated Values:

1	undefined
2	includesSFF8436V48OrEarlier
3	includesSFF8436V48OrEarlierEX
4	includesSFF8636V13OrEarlier
5	includesSFF8636V14
6	includesSFF8636V15
7	includesSFF8636V20
8	includesSFF8636V25To27
9	includesSFF8636V28OrLater
255	invalid

.1.3.6.1.4.1.2011.5.14.6.1.1.41

hwOpticsModuleTransceiverTable

table

.1.3.6.1.4.1.2011.5.14.6.2 · 1 row entry · 9 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsModuleTransceiverTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsModuleTransceiverTable'

This table used for querying the information about the optical transceiver of an Ethernet port.
The index of this table is ifindex.

hwOpticsModuleTransceiverEntry row .1.3.6.1.4.1.2011.5.14.6.2.1

This table used for querying the information about the optical transceiver of an Ethernet port.
The index of this entry is ifindex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwOpticsMDInfinibandComplianceCodes

Infiniband transceiver type.
Options:
1. sx(1) -infiniband transceiver type is sx
2. lx(2) -infiniband transceiver type is lx
3. copperActive(3) -infiniband transceiver type is copperActive
4. co…

Enumeration

Enumerated Values:

-1	invalid
1	sx
2	lx
3	copperActive
4	copperPassive

.1.3.6.1.4.1.2011.5.14.6.2.1.1

hwOpticsMDSONETcomplianceCodes

SONET transceiver type.
Options:
1. oC48LongReach(1) -SONET transceiver type is oC48LongReach
2. oC48IntermediateReach(2) -SONET transceiver type is oC48IntermediateReach
3. oC48Shor…

Enumeration

Enumerated Values:

-1	invalid
1	oC48LongReach
2	oC48IntermediateReach
3	oC48ShortReach
4	oC12SingleModeLongReach
5	oC12SingleModeIntermediateReach
6	oC12MultiModeShortReach
7	oC3SingleModeLongReach
8	oC3SingleModeIntermediateReach
9	oC3MultiModeShortReach

.1.3.6.1.4.1.2011.5.14.6.2.1.2

hwOpticsMDGEComplianceCodes

Ethernet transceiver type.
Options:
1. en1000BASET(1) -Ethernet transceiver type is 1000BASE-T
2. en1000BASECX(2) -Ethernet transceiver type is 1000BASE-CX
3. en1000BASELX(3) -Eth…

Enumeration

Enumerated Values:

-1	invalid
1	en1000BASET
2	en1000BASECX
3	en1000BASELX
4	en1000BASESX
5	enMULTILX
6	en100BASELX
7	en100BASEFX
8	en1000BASEBX
9	en1000BASEPX
10	en10GBASELRM
11	en10GBASELR
12	en10GBASESR
13	en100BASEBX
14	en10GBASEER
15	en1000BASEZX
16	en100GBASESR4
17	en100GBASELR4
18	en100GBASEER4
19	en100GBASESR10
255	invalid1

.1.3.6.1.4.1.2011.5.14.6.2.1.3

hwOpticsMDLinkLength

Fibre Channel link length.
Options:
1. veryLongDistance(1) -fibre channel link length is veryLongDistance
2. shortDistance(2) -fibre channel link length is shortDistance
3. intermediateDistance(3) -fibre c…

Enumeration

Enumerated Values:

-1	invalid
1	veryLongDistance
2	shortDistance
3	intermediateDistance
4	longDistance
5	mediumDistance

.1.3.6.1.4.1.2011.5.14.6.2.1.4

hwOpticsMDTransmitterTechnology

Fibre Channel transmitter technology.
Options:
1. longwaveLaser(1) -fibre channel transmitter technology is longwaveLaser
2. electricalInterenclosure(2) -fibre channel transmitter technology is electric…

Enumeration

Enumerated Values:

-1	invalid
1	longwaveLaser
2	electricalInterenclosure
3	shortwaveLaser

.1.3.6.1.4.1.2011.5.14.6.2.1.5

hwOpticsMDTransmissionMedia

Fibre Channel transmission media.
Options:
1. twinAxialPair(1) -fibre channel transmission media is twinAxialPair
2. shieldedTwistedPair(2) -fibre channel transmission media is shieldedTwistedPair
3. minia…

Enumeration

Enumerated Values:

-1	invalid
1	twinAxialPair
2	shieldedTwistedPair
3	miniatureCoax
4	videoCoax
5	multiMode62m5
6	multiMode50m
7	singleMode
8	multiMode50mOM3

.1.3.6.1.4.1.2011.5.14.6.2.1.6

hwOpticsMDSpeed

Fibre Channel speed.
Options:
1. speed400MBytesPerSec(1) -fibre channel speed is 400 MBits/s
2. speed200MBytesPerSec(2) -fibre channel speed is 200 MBits/s
3. speed100MBytesPerSec(3) -fibre channel speed is 1…

Enumeration

Enumerated Values:

-1	invalid
1	speed400MBytesPerSec
2	speed200MBytesPerSec
3	speed100MBytesPerSec
4	speed800MBytesPerSec
5	speed1200MBytesPerSec
6	speed1600MBytesPerSec
7	speed3200MBytesPerSec
8	speedExtended

.1.3.6.1.4.1.2011.5.14.6.2.1.7

hwOpticsMDTransceiverRemote

Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	remote

.1.3.6.1.4.1.2011.5.14.6.2.1.8

hwOpticsMDHuaweiPartNumber

Indicate the part number of a optical module provided by Huawei.

OctetString

Constraints:
range: 0-17

.1.3.6.1.4.1.2011.5.14.6.2.1.9

hw10GEOpticsModuleInformationTable

table

.1.3.6.1.4.1.2011.5.14.6.3 · 1 row entry · 80 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hw10GEOpticsModuleInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hw10GEOpticsModuleInformationTable'

Indicates the 10GE optical module information table of an Ethernet port.
It is used for querying the information about the 10GE optical module of
an Ethernet port.
The index of this table is ifindex.

hw10GEOpticsModuleInformationEntry row .1.3.6.1.4.1.2011.5.14.6.3.1

Indicates the 10GE optical module information table of an Ethernet port.
It is used for querying the information about the 10GE optical module of
an Ethernet port.
The index of this entry is ifindex.

Indexes

IF-MIBifIndex

Column Syntax OID

hw10GEOpticsMDIdentifier

Indicate the identifier of 10GE optical module.
Options:
1. unknown(0) -unknown identifier of 10GE optical module
2. gbic(1) -the identifier of 10GE opt…

Enumeration

Enumerated Values:

-1	invalid
0	unknown
1	gbic
2	solderedToMotherBoard
3	sfp
4	pin300XBI
5	xenpak
6	xfp
7	xff
8	xfep
9	xpak
10	x2

.1.3.6.1.4.1.2011.5.14.6.3.1.1

hw10GEOpticsMDExtCLEICode

Extended identifier: CLEI
Options:
1. nonExtCLEICode(0) -no CLEI code present in Table 02h
2. extCLEICode(1) -CLEI code present in Table 02h
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonExtCLEICode
1	extCLEICode

.1.3.6.1.4.1.2011.5.14.6.3.1.2

hw10GEOpticsMDExtTXRefClock

Extended identifier: TX Ref Clock
Options:
1. nonExtTXRefClock(0) -tx Ref Clock Input Not Required
2. extTXRefClock(1) -tx Ref Clock Input Required
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonExtTXRefClock
1	extTXRefClock

.1.3.6.1.4.1.2011.5.14.6.3.1.3

hw10GEOpticsMDExtCDRFunc

Extended identifier: CDR function
Options:
1. nonExtCDRFunc(0) -no CDR version of XFP
2. extCDRFunc(1) -module with CDR function
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonExtCDRFunc
1	extCDRFunc

.1.3.6.1.4.1.2011.5.14.6.3.1.4

hw10GEOpticsMDExtPowerLevel

Extended identifier: Power Level
Options:
1. extPowerLevel1(0) -power Level 1 Module (1.5 W max. power dissipation.)
2. extPowerLevel2(1) -power Level 2 Module (2.5W Max)
3. extPowerLevel3(2) -power Level 3 Module…

Enumeration

Enumerated Values:

-1	invalid
0	extPowerLevel1
1	extPowerLevel2
2	extPowerLevel3
3	extPowerLevel4

.1.3.6.1.4.1.2011.5.14.6.3.1.5

hw10GEOpticsMDConnector

Indicate the type of 10GE optical module connector.
Options:
1. unknown(0) -unknown the type of 10GE optical module connector
2. sc(1) -the type of 10GE optical module connector is s…

Enumeration

Enumerated Values:

-1	invalid
0	unknown
1	sc
2	style1Connector
3	style2Connector
4	bnctnc
5	channelCoaxial
6	fiberJack
7	lc
8	mtrj
9	mu
10	sg
11	opticalPigtail
20	hssdc
21	copperPigtail

.1.3.6.1.4.1.2011.5.14.6.3.1.6

hw10GEOpticsMDEthComplianceBaseEW

Indicate 10GBASE-EW support or not.
Options:
1. nonEthComplianceBaseEW(0) -not support 10GBASE-EW
2. ethComplianceBaseEW(1) -support 10GBASE-EW

Enumeration

Enumerated Values:

0	nonEthComplianceBaseEW
1	ethComplianceBaseEW

.1.3.6.1.4.1.2011.5.14.6.3.1.7

hw10GEOpticsMDEthComplianceBaseLW

Indicate 10GBASE-LW support or not.
Options:
1. nonEthComplianceBaseLW(0) -not support 10GBASE-LW
2. ethComplianceBaseLW(1) -support 10GBASE-LW

Enumeration

Enumerated Values:

0	nonEthComplianceBaseLW
1	ethComplianceBaseLW

.1.3.6.1.4.1.2011.5.14.6.3.1.8

hw10GEOpticsMDEthComplianceBaseSW

Indicate 10GBASE-SW support or not.
Options:
1. nonEthComplianceBaseSW(0) -not support 10GBASE-SW
2. ethComplianceBaseSW(1) -support 10GBASE-SW

Enumeration

Enumerated Values:

0	nonEthComplianceBaseSW
1	ethComplianceBaseSW

.1.3.6.1.4.1.2011.5.14.6.3.1.9

hw10GEOpticsMDEthComplianceBaseLRM

Indicate 10GBASE-LRM support or not.
Options:
1. nonEthComplianceBaseLRM(0) -not support 10GBASE-LRM
2. ethComplianceBaseLRM(1) -support 10GBASE-LRM

Enumeration

Enumerated Values:

0	nonEthComplianceBaseLRM
1	ethComplianceBaseLRM

.1.3.6.1.4.1.2011.5.14.6.3.1.10

hw10GEOpticsMDEthComplianceBaseER

Indicate 10GBASE-ER support or not.
Options:
1. nonEthComplianceBaseER(0) -not support 10GBASE-ER
2. ethComplianceBaseER(1) -support 10GBASE-ER

Enumeration

Enumerated Values:

0	nonEthComplianceBaseER
1	ethComplianceBaseER

.1.3.6.1.4.1.2011.5.14.6.3.1.11

hw10GEOpticsMDEthComplianceBaseLR

Indicate 10GBASE-LR support or not.
Options:
1. nonEthComplianceBaseLR(0) -not support 10GBASE-LR
2. ethComplianceBaseLR(1) -support 10GBASE-LR

Enumeration

Enumerated Values:

0	nonEthComplianceBaseLR
1	ethComplianceBaseLR

.1.3.6.1.4.1.2011.5.14.6.3.1.12

hw10GEOpticsMDEthComplianceBaseSR

Indicate 10GBASE-SR support or not.
Options:
1. nonEthComplianceBaseSR(0) -not support 10GBASE-SR
2. ethComplianceBaseSR(1) -support 10GBASE-SR

Enumeration

Enumerated Values:

0	nonEthComplianceBaseSR
1	ethComplianceBaseSR

.1.3.6.1.4.1.2011.5.14.6.3.1.13

hw10GEOpticsMDFibreCompliance

Indicate 10 Gigabit Fibre Channel Compliance type.
Options:
1. fibreComplianceInter1300FP(16) -intermediate Reach 1300 nm FP
2. fibreComplianceExtended1550(32) -extended reach 1550 nm
3. fibreComplianceSM1200(64) …

Enumeration

Enumerated Values:

-1	invalid
16	fibreComplianceInter1300FP
32	fibreComplianceExtended1550
64	fibreComplianceSM1200
128	fibreComplianceMX1200

.1.3.6.1.4.1.2011.5.14.6.3.1.14

hw10GEOpticsMDLowerSpeedLink

Indicate Lower Speed Links type.
Options:
1. lowerSpeedLinkOC48LR(2) -lower speed links type is OC48LR
2. lowerSpeedLinkOC48IR(4) -lower speed links type is OC48IR
3. lowerSpeedLinkOC48SR(8) -lower speed links t…

Enumeration

Enumerated Values:

-1	invalid
2	lowerSpeedLinkOC48LR
4	lowerSpeedLinkOC48IR
8	lowerSpeedLinkOC48SR
16	lowerSpeedLinkFCSMF
32	lowerSpeedLinkFCMMF
64	lowerSpeedLinkLXSMF
128	lowerSpeedLinkSXMMF

.1.3.6.1.4.1.2011.5.14.6.3.1.15

hw10GEOpticsMDSONETSDHCodesI64point5

Indicate SONET/SDH Codes I-64.5 support or not.
Options:
1. notSupport(0) -not Support I-64.5
2. support(1) -support I-64.5

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.16

hw10GEOpticsMDSONETSDHCodesI64point3

Indicate SONET/SDH Codes I-64.3 support or not.
Options:
1. notSupport(0) -not Support I-64.3
2. support(1) -support I-64.3

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.17

hw10GEOpticsMDSONETSDHCodesI64point2

Indicate SONET/SDH Codes I-64.2 support or not.
Options:
1. notSupport(0) -not Support I-64.2
2. support(1) -support I-64.2

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.18

hw10GEOpticsMDSONETSDHCodesI64point2r

Indicate SONET/SDH Codes I-64.2r support or not.
Options:
1. notSupport(0) -not support I-64.2r
2. support(1) -support I-64.2r

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.19

hw10GEOpticsMDSONETSDHCodesI64point1

Indicate SONET/SDH Codes I-64.1 support or not.
Options:
1. notSupport(0) -not support I-64.1
2. support(1) -support I-64.1

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.20

hw10GEOpticsMDSONETSDHCodesI64point1r

Indicate SONET/SDH Codes I-64.1r support or not.
Options:
1. notSupport(0) -not support I-64.1r
2. support(1) -support I-64.1r

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.21

hw10GEOpticsMDSONETSDHCodesS64point5b

Indicate SONET/SDH Codes S-64.5b support or not.
Options:
1. notSupport(0) -not support S-64.5b
2. support(1) -support S-64.5b

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.22

hw10GEOpticsMDSONETSDHCodesS64point5a

Indicate SONET/SDH Codes S-64.5a support or not.
Options:
1. notSupport(0) -not support S-64.5a
2. support(1) -support S-64.5a

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.23

hw10GEOpticsMDSONETSDHCodesS64point3b

Indicate SONET/SDH Codes S-64.3b support or not.
Options:
1. notSupport(0) -not support S-64.3b
2. support(1) -support S-64.3b

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.24

hw10GEOpticsMDSONETSDHCodesS64point3a

Indicate SONET/SDH Codes S-64.3a support or not.
Options:
1. notSupport(0) -not support S-64.3a
2. support(1) -support S-64.3a

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.25

hw10GEOpticsMDSONETSDHCodesS64point2b

Indicate SONET/SDH Codes S-64.2b support or not.
Options:
1. notSupport(0) -not support S-64.2b
2. support(1) -support S-64.2b

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.26

hw10GEOpticsMDSONETSDHCodesS64point2a

Indicate SONET/SDH Codes S-64.2a support or not.
Options:
1. notSupport(0) -not support S-64.2a
2. support(1) -support S-64.2a

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.27

hw10GEOpticsMDSONETSDHCodesS64point1

Indicate SONET/SDH Codes S-64.1 support or not.
Options:
1. notSupport(0) -not support S-64.1
2. support(1) -support S-64.1

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.28

hw10GEOpticsMDSONETSDHCodesG959P1L1

Indicate SONET/SDH Codes G.959.1 P1L1-2D2 support or not.
Options:
1. notSupport(0) -not support G.959.1 P1L1-2D2
2. support(1) -support G.959.1 P1L1-2D2

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.29

hw10GEOpticsMDSONETSDHCodesL64point3

Indicate SONET/SDH Codes L-64.3 support or not.
Options:
1. notSupport(0) -not support L-64.3
2. support(1) -support L-64.3

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.30

hw10GEOpticsMDSONETSDHCodesL64point2c

Indicate SONET/SDH Codes L-64.2c support or not.
Options:
1. notSupport(0) -not support L-64.2c
2. support(1) -support L-64.2c

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.31

hw10GEOpticsMDSONETSDHCodesL64point2b

Indicate SONET/SDH Codes L-64.2b support or not.
Options:
1. notSupport(0) -not support L-64.2b
2. support(1) -support L-64.2b

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.32

hw10GEOpticsMDSONETSDHCodesL64point2a

Indicate SONET/SDH Codes L-64.2a support or not.
Options:
1. notSupport(0) -not support L-64.2a
2. support(1) -support L-64.2a

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.33

hw10GEOpticsMDSONETSDHCodesL64point1

Indicate SONET/SDH Codes L-64.1 support or not.
Options:
1. notSupport(0) -not support L-64.1
2. support(1) -support L-64.1

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.34

hw10GEOpticsMDSONETSDHCodesV64point3

Indicate SONET/SDH Codes V-64.3 support or not.
Options:
1. notSupport(0) -not support V-64.3
2. support(1) -support V-64.3

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.35

hw10GEOpticsMDSONETSDHCodesV64point2b

Indicate SONET/SDH Codes V-64.2b support or not.
Options:
1. notSupport(0) -not support V-64.2b
2. support(1) -support V-64.2b

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.36

hw10GEOpticsMDSONETSDHCodesV64point2a

Indicate SONET/SDH Codes V-64.2a support or not.
Options:
1. notSupport(0) -not support V-64.2a
2. support(1) -support V-64.2a

Enumeration

Enumerated Values:

0	notSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.37

hw10GEOpticsMDEncodingRZ

Indicate encoding mechanism RZ support or not.
Options:
1. nonEncodingRZ(0) -not support RZ
2. encodingRZ(1) -support RZ

Enumeration

Enumerated Values:

0	nonEncodingRZ
1	encodingRZ

.1.3.6.1.4.1.2011.5.14.6.3.1.38

hw10GEOpticsMDEncodingNRZ

Indicate encoding mechanism NRZ support or not.
Options:
1. nonEncodingNRZ(0) -not support NRZ
2. encodingNRZ(1) -support NRZ

Enumeration

Enumerated Values:

0	nonEncodingNRZ
1	encodingNRZ

.1.3.6.1.4.1.2011.5.14.6.3.1.39

hw10GEOpticsMDEncodingSONET

Indicate encoding mechanism SONET support or not.
Options:
1. nonEncodingSONET(0) -not support SONET
2. encodingSONET(1) -support SONET

Enumeration

Enumerated Values:

0	nonEncodingSONET
1	encodingSONET

.1.3.6.1.4.1.2011.5.14.6.3.1.40

hw10GEOpticsMDEncoding8B10B

Indicate encoding mechanism 8B10B support or not.
Options:
1. nonEncoding8B10B(0) -not support 8B10B
2. encoding8B10B(1) -support 8B10B

Enumeration

Enumerated Values:

0	nonEncoding8B10B
1	encoding8B10B

.1.3.6.1.4.1.2011.5.14.6.3.1.41

hw10GEOpticsMDEncoding64B

Indicate encoding mechanism 64B/66B support or not.
Options:
1. nonEncoding64B(0) -not support 64B/66B
2. encoding64B(1) -support 64B/66B

Enumeration

Enumerated Values:

0	nonEncoding64B
1	encoding64B

.1.3.6.1.4.1.2011.5.14.6.3.1.42

hw10GEOpticsMDBrMin

Minimum bit rate.
Unit: 100 MBits/s

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.43

hw10GEOpticsMDBrMax

Maximum bit rate.
Unit: 100 MBits/s

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.44

hw10GEOpticsMDSupportLenSMF

Indicate the link length that is supported by the transceiver with the applicable standards
using Single-mode Fiber.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.45

hw10GEOpticsMDSupportLenE50um

Indicate the link length that is supported by the transceiver with the applicable standards
using 2000MHz*km (850nm) extended bandwidth 50 micron core multimode fiber.
Unit: 2m

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.46

hw10GEOpticsMDSupportLen50um

This value specifies the link length that is supported by the transceiver with the applicable
standards using 500MHz*km (850 and 1310nm) 50 micron core multimode fiber.
Unit: 1m

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.47

hw10GEOpticsMDSupportLen62p5um

This value specifies the link length that is supported by the transceiver with the applicable
standards using 200MHz*km (850 nm)/500 MHz*km (1310 nm) 62.5 micron core multimode fiber.
Unit: 1m

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.48

hw10GEOpticsMDSupportLenCopper

Indicate the minimum link length that is supported by the transceiver with copper cable.
Unit: 1m

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.49

hw10GEOpticsMDTransmitterSupport

Indicate the transmitter support tunable or not.
Options:
1. nonTunable(0) -transmitter not support tunable
2. tunable(1) -transmitter support tunable
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonTunable
1	tunable

.1.3.6.1.4.1.2011.5.14.6.3.1.50

hw10GEOpticsMDDetector

Indicate the Detector is enable or not.
Options:
1. nonDetector(0) -detector is disable
2. detector(1) -detector is enable
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonDetector
1	detector

.1.3.6.1.4.1.2011.5.14.6.3.1.51

hw10GEOpticsMDCooledTransmitterDevice

Indicate the Cooled transmitter is enable or not.
Options:
1. nonSupport(0) -cooled transmitter is disable
2. support(1) -cooled transmitter is enable
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.52

hw10GEOpticsMDWavelengthControl

Indicate the wavelength control support or not.
Options:
1. nonSupport(0) -wavelength control not support
2. support(1) -wavelength control support
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonSupport
1	support

.1.3.6.1.4.1.2011.5.14.6.3.1.53

hw10GEOpticsMDTransmitterTechnologySupport

Indicate the transmitter technology type.
Options:
1. vCSEL850(0) -the transmitter technology type is vCSEL850
2. vCSEL1310(1) -the transmitter technology type is vCSEL1310
3. vCSEL1550(2) -the transmitter tec…

Enumeration

Enumerated Values:

-1	invalid
0	vCSEL850
1	vCSEL1310
2	vCSEL1550
3	fP1310
4	dFB1310
5	dFB1550
6	eML1310
7	eML1550
8	cOPPER

.1.3.6.1.4.1.2011.5.14.6.3.1.54

hw10GEOpticsMDVendorName

Indicate the vendor name of a 10GE optical module.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2011.5.14.6.3.1.55

hw10GEOpticsMDSupportXFIMode

Indicate the XFI loopback mode support or not.
Options:
1. nonSupportXFIMode(0) -the XFI loopback mode not support
2. supportXFIMode(1) -the XFI loopback mode support
3. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
0	nonSupportXFIMode
1	supportXFIMode

.1.3.6.1.4.1.2011.5.14.6.3.1.56

hw10GEOpticsMDSupportLinesideMode

Indicate the Lineside loopback mode support or not.
Options:
1. nonSupportLinesideMode(0) -lineside loopback mode not support
2. supportLinesideMode(1) -lineside loopback mode support
3. invalid(-1) -invalid va…

Enumeration

Enumerated Values:

-1	invalid
0	nonSupportLinesideMode
1	supportLinesideMode

.1.3.6.1.4.1.2011.5.14.6.3.1.57

hw10GEOpticsMDMaxBitRateSupportedByCDR

Indicate which rate is supported by the CDR.
Options:
1. maxBitRateSupportedByCDR11p1(1) -CDR support for 11.1 Gb/s
2. maxBitRateSupportedByCDR10p7(3) -CDR support for 10.7 Gb/s
3. maxBitRateSupportedByCDR10p5(7) -C…

Enumeration

Enumerated Values:

-1	invalid
1	maxBitRateSupportedByCDR11p1
3	maxBitRateSupportedByCDR10p7
7	maxBitRateSupportedByCDR10p5
15	maxBitRateSupportedByCDR10p3
31	maxBitRateSupportedByCDR9p95

.1.3.6.1.4.1.2011.5.14.6.3.1.58

hw10GEOpticsMDVendorOUI

Indicate the vendor IEEE company ID of a 10GE optical module.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.59

hw10GEOpticsMDVendorPN

Indicate the part number of a 10GE optical module provided by vendor.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2011.5.14.6.3.1.60

hw10GEOpticsMDVendorRev

Indicate the revision level for part number provided by vendor.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2011.5.14.6.3.1.61

hw10GEOpticsMDWavelength

The laser wavelength.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.62

hw10GEOpticsMDWaveTolerance

The guaranteed +/- range of transmitter output wavelength under all normal operating conditions.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.63

hw10GEOpticsMDMaxCaseTemperature

Maximum Case Temperature in Degrees C.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.64

hw10GEOpticsMDCcbase

Cc_base.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.65

hw10GEOpticsMDMaxDissipation

Maximum Power Dissipation.
Max power is 8 bit value * 20 mW.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.66

hw10GEOpticsMDMaxDissipationPowerDownMode

Maximum Total Power Dissipation in Power Down Mode.
Max Power is 8 bit value * 10 mW.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.67

hw10GEOpticsMDMaximum5P0VSupply

Maximum current required by +5V Supply.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.68

hw10GEOpticsMDMaximum3P3VSupply

Maximum current required by +3.3V Supply.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.69

hw10GEOpticsMDMaximum1P8VSupply

Maximum current required by +1.8V Supply.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.70

hw10GEOpticsMDMaximum5P2VSupply

Maximum current required by -5.2V Supply.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.71

hw10GEOpticsMDVendorSN

The serial number of a 10GE optical module provided by vendor.

OctetString

Constraints:
range: 0-140

.1.3.6.1.4.1.2011.5.14.6.3.1.72

hw10GEOpticsMDDateCode

The date code of a 10GE optical module.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2011.5.14.6.3.1.73

hw10GEOpticsMDDiagnoMonitorPowerMeasure

Received power measurement type.
Options:
1. supportOMA(0) -OMA
2. supportAveragePower(1) -AveragePower

Enumeration

Enumerated Values:

0	supportOMA
1	supportAveragePower

.1.3.6.1.4.1.2011.5.14.6.3.1.74

hw10GEOpticsMDDiagnoMonitorTypeFECBER

Module Respond to FEC BER.
Options:
1. nonSupportBER(0) -no BER Support
2. supportBER(1) -BER Support

Enumeration

Enumerated Values:

0	nonSupportBER
1	supportBER

.1.3.6.1.4.1.2011.5.14.6.3.1.75

hw10GEOpticsMDEnhancedOptions

Indicate enhanced Options.
Options:
1. cmu(0) -enhanced options is cmu
2. rateSelect(2) -enhanced options is rateSelect
3. fec(4) -enhanced options is fec
4. vpsby(8) -enhanced options…

Enumeration

Enumerated Values:

-1	invalid
0	cmu
2	rateSelect
4	fec
8	vpsby
16	rxLOS
32	txFault
64	txDisable
128	alarmFLGIM

.1.3.6.1.4.1.2011.5.14.6.3.1.76

hw10GEOpticsMDAuxInputOne

Indicate which quantity is monitored by each auxiliary A/D channel one.
Options:
1. auxInputType1(0) -Auxiliary monitoring not implemented
2. auxInputType2(1) -APD Bias Voltage
3. auxInputType4(3) -TE…

Enumeration

Enumerated Values:

-1	invalid
0	auxInputType1
1	auxInputType2
3	auxInputType4
4	auxInputType5
5	auxInputType6
6	auxInputType7
7	auxInputType8
8	auxInputType9
9	auxInputType10
10	auxInputType11
13	auxInputType14
14	auxInputType15
15	auxInputType16

.1.3.6.1.4.1.2011.5.14.6.3.1.77

hw10GEOpticsMDAuxInputTwo

Indicate which quantity is monitored by each auxiliary A/D channel two.
Options:
1. auxInputType1(0) -Auxiliary monitoring not implemented
2. auxInputType2(1) -APD Bias Voltage
3. auxInputType4(3) -T…

Enumeration

Enumerated Values:

-1	invalid
0	auxInputType1
1	auxInputType2
3	auxInputType4
4	auxInputType5
5	auxInputType6
6	auxInputType7
7	auxInputType8
8	auxInputType9
9	auxInputType10
10	auxInputType11
13	auxInputType14
14	auxInputType15
15	auxInputType16

.1.3.6.1.4.1.2011.5.14.6.3.1.78

hw10GEOpticsMDCCEXT

CC_EXT

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.3.1.79

hw10GEOpticsMDVendorSpecific

Vendor of 10GE Optical module specific information.

OctetString

Constraints:
range: 0-140

.1.3.6.1.4.1.2011.5.14.6.3.1.80

hwOpticsDdmInformationTable

table

.1.3.6.1.4.1.2011.5.14.6.4 · 1 row entry · 9 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsDdmInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsDdmInformationTable'

Indicates the optical module diagnose information table of an Ethernet port. 
It is used for querying the diagnose information about the optical module of
an Ethernet port.
The index of this table is ifindex.

hwOpticsDdmInformationEntry row .1.3.6.1.4.1.2011.5.14.6.4.1

Indicates the optical module diagnose information table of an Ethernet port.
It is used for querying the diagnose information about the optical module of
an Ethernet port.
The index of this entry is ifindex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwOpticsTemperature

Temperature.
Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported.
Unit: 0.000001C

0.000001CSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.1

hwOpticsSupplyVoltage

Supply voltage.
Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported.
Unit: 0.000001V

0.000001VSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.2

hwOpticsTxBiasCurrent

Transmitted bias current.
Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported.
Unit: 0.000001mA

0.000001mASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.3

hwOpticsTxPower

Transmitted power.
Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported.
Unit: 0.000001dBm

0.000001dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.4

hwOpticsRxPower

Received power.
Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported.
Unit: 0.000001dBm

0.000001dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.5

hwOpticsMDDdmInfoRemote

Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	remote

.1.3.6.1.4.1.2011.5.14.6.4.1.6

hwOpticsLaserTemperature

Temperature of the optical laser.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001C

0.000001CSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.7

hwOpticsWaveLength

Wavelength of the optical laser.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.01nm

0.01nmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.8

hwOpticsTecCurrent

Current of the thermoelectric cooler on the optical module.
Invalid value: 2147483647, returned if the optical module is unavailable or not supported.
Unit: 0.000001A

0.000001ASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.14.6.4.1.9

hwOpticsPowerThresholdTable

table

.1.3.6.1.4.1.2011.5.14.6.5 · 1 row entry · 23 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsPowerThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsPowerThresholdTable'

Indicates the optical power threshold table of an Ethernet port.
It is used for querying, setting, and clearing the optical power threshold of an Ethernet port.
After the power threshold is set, the power threshold alarming function of the optical port is enabled.
When the optical power is lower than the lower threshold or higher than the upper threshold, an alarm is reported.
The index of this table is ifindex.

hwOpticsPowerThresholdEntry row .1.3.6.1.4.1.2011.5.14.6.5.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwOpticsPowerTxLowerThresholdValue

TX optical power lower limit threshold value.
Options:
1. -99000000..100000000 -valid range of optical power lower limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection t…

0.000001dBmInteger32r/w

Constraints:
range: -99000000-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.1

hwOpticsPowerThresholdSwitch

Optical power threshold value Switch.
Options:
1. on(1) -set optical power threshold value
2. off(2) -clear optical power threshold value
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.2

hwOpticsPowerTxUpperThresholdValue

TX optical power upper limit threshold value.
1. -99000000..100000000 -valid range of optical power upper limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold.…

0.000001dBmInteger32r/w

Constraints:
range: -99000000-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.3

hwOpticsPowerRxUpperThresholdValue

RX optical power upper limit threshold value.
1. -99000000..100000000 -valid range of optical power upper limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold.…

0.000001dBmInteger32r/w

Constraints:
range: -99000000-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.4

hwOpticsPowerRxLowerThresholdValue

RX optical power lower limit threshold value.
1. -99000000..100000000 -valid range of optical power lower limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold.…

0.000001dBmInteger32r/w

Constraints:
range: -99000000-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.5

hwOpticsTemperatureLowerThresholdValue

Optical temperature lower limit threshold value.
1. -99000000..300000000 -valid range of optical temperature lower limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection t…

0.000001CInteger32r/w

Constraints:
range: -99000000-300000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.6

hwOpticsTemperatureUpperThresholdValue

Optical temperature upper limit threshold value.
1. -99000000..300000000 -valid range of optical temperature upper limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection t…

0.000001CInteger32r/w

Constraints:
range: 2147483646-2147483647
range: -99000000-300000000

.1.3.6.1.4.1.2011.5.14.6.5.1.7

hwOpticsTemperatureThresholdSwitch

Optical temperature threshold value Switch.
Options:
1. on(1) -set optical temparature threshold value
2. off(2) -clear optical temperature threshold value
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.8

hwOpticsVoltageLowerThresholdValue

Optical voltage lower limit threshold value.
1. 0..100000000 -valid range of optical voltage lower limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001VInteger32r/w

Constraints:
range: 0-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.9

hwOpticsVoltageUpperThresholdValue

Optical voltage upper limit threshold value.
1. 0..100000000 -valid range of optical voltage upper limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001VInteger32r/w

Constraints:
range: 0-100000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.10

hwOpticsVoltageThresholdSwitch

Optical voltage threshold value Switch.
Options:
1. on(1) -set optical voltage threshold value
2. off(2) -clear optical voltage threshold value
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.11

hwOpticsCurrentLowerThresholdValue

Optical current lower limit threshold value.
1. 0..10000000 -valid range of optical current lower limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001AInteger32r/w

Constraints:
range: 0-10000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.12

hwOpticsCurrentUpperThresholdValue

Optical current upper limit threshold value.
1. 0..10000000 -valid range of optical current upper limit threshold value.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001AInteger32r/w

Constraints:
range: 0-10000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.13

hwOpticsCurrentThresholdSwitch

Optical current threshold value Switch.
Options:
1. on(1) -set optical current threshold value
2. off(2) -clear optical current threshold value
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.14

hwOpticsLaserTemperatureLowerThresholdValue

Lower optical laser temperature threshold.
1. -99000000..300000000 -valid range of the lower optical laser temperature threshold.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001CInteger32r/w

Constraints:
range: -99000000-300000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.15

hwOpticsLaserTemperatureUpperThresholdValue

Upper optical laser temperature threshold.
1. -99000000..300000000 -valid range of the upper optical laser temperature threshold.
2. 2147483646 -indication the optical module built-in alarm detection threshold…

0.000001CInteger32r/w

Constraints:
range: -99000000-300000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.16

hwOpticsLaserTemperatureThresholdSwitch

Switch of optical laser temperature thresholds.
Options:
1. on(1) -Set optical laser temperature thresholds.
2. off(2) -Clear optical laser temperature thresholds.
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.17

hwOpticsWaveLengthLowerThresholdValue

Lower optical laser wavelength threshold.
1. 100000..165600 -valid range of the lower optical laser wavelength threshold.
2. 2147483646 -indication the optical module built-in alarm detection threshold.
3. 214748364…

0.01nmInteger32r/w

Constraints:
range: 100000-165600
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.18

hwOpticsWaveLengthUpperThresholdValue

Upper optical laser wavelength threshold.
1. 100000..165600 -valid range of the upper optical laser wavelength threshold.
2. 2147483646 -indication the optical module built-in alarm detection threshold.
3. 214748364…

0.01nmInteger32r/w

Constraints:
range: 100000-165600
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.19

hwOpticsWaveLengthThresholdSwitch

Switch of optical laser wavelength thresholds.
Options:
1. on(1) -Set optical laser wavelength thresholds.
2. off(2) -Clear optical laser wavelength thresholds.
3. invalid(-1) -invalid value
Default: off(2)

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.20

hwOpticsTecCurrentLowerThresholdValue

Lower threshold for the thermoelectric cooler current.
1. -10000000-10000000 -valid range of the lower threshold for the thermoelectric cooler current.
2. 2147483646 -indication the optical module built-in alarm…

0.000001AInteger32r/w

Constraints:
range: -10000000-10000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.21

hwOpticsTecCurrentUpperThresholdValue

Upper threshold for the thermoelectric cooler current.
1. -10000000-10000000 -valid range of the upper threshold for the thermoelectric cooler current.
2. 2147483646 -indication the optical module built-in alarm…

0.000001AInteger32r/w

Constraints:
range: -10000000-10000000
range: 2147483646-2147483647

.1.3.6.1.4.1.2011.5.14.6.5.1.22

hwOpticsTecCurrentThresholdSwitch

Switch of thermoelectric cooler current thresholds.
Options:
1. on(1) -Set thermoelectric cooler current thresholds.
2. off(2) -Clear thermoelectric cooler current thresholds.
3. invalid(-1) -invalid value
De…

Enumerationr/w

Enumerated Values:

-1	invalid
1	on
2	off

.1.3.6.1.4.1.2011.5.14.6.5.1.23

hwOpticsSmartSFPExtModuleInformationTable

table

.1.3.6.1.4.1.2011.5.14.6.7 · 1 row entry · 16 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsSmartSFPExtModuleInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsSmartSFPExtModuleInformationTable'

Indicates the extended information table of a smart SFP optical module.
It is used for querying the extend information about a smart SFP optical module and setting loopback of a smart SFP optical module.
This operation can be performed on both local and remote optical modules.
When this operation is performed on a remote optical module, the hwOpticsSmartSFPExtModuleInfoRemote leaf is required.
The index of this table is ifIndex.

hwOpticsSmartSFPExtModuleInformationEntry row .1.3.6.1.4.1.2011.5.14.6.7.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwOpticsSmartSFPIdentifier

Indicates the type of a smart SFP optical module.
Options:
1. smartSFPI(1) -The optical module is a smart SFP I optical module
2. smartSFPII(2) -The optical module is a smart SFP II optical module…

Enumeration

Enumerated Values:

1	smartSFPI
2	smartSFPII
3	unknowType

.1.3.6.1.4.1.2011.5.14.6.7.1.1

hwOpticsSmartSFPProtocolVersion

Indicates the protocol version of a smart SFP optical module.
Range: -1, 0-255.
-1 is the invalid value.

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.5.14.6.7.1.2

hwOpticsSmartSFPSSFPEnhancedOption

Indicates the enhanced options of a smart SFP optical module.
Range: -1, 0-65535.
-1 is the invalid value.

Integer32

Constraints:
range: -1-65535

.1.3.6.1.4.1.2011.5.14.6.7.1.3

hwOpticsSmartSFPPassword

Indicates the password of a smart SFP optical module.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.14.6.7.1.4

hwOpticsSmartSFPRemoteControllable

Indicates whether the remote smart SFP optical module can control the local optical module.
Options:
1. disable(1) -disable, control command from remote optical module will be ignored
2. enable(2) -enable
3…

Enumeration

Enumerated Values:

-1	invalid
1	disable
2	enable

.1.3.6.1.4.1.2011.5.14.6.7.1.5

hwOpticsSmartSFPSubCarrierControl

Indicates sub-carrier control of a smart SFP optical module, that is,
whether the local smart SFP optical module can send signals to the remote optical module.
Options:
1. disable(1) -disable
2. enable(2) …

Enumeration

Enumerated Values:

-1	invalid
1	disable
2	enable

.1.3.6.1.4.1.2011.5.14.6.7.1.6

hwOpticsSmartSFPSubCarrierlinkStatus

Indicates the sub-carrier status of a smart SFP optical module.
Options:
1. down(1) -linked down
2. rxUp(2) -linked up in RX only
3. up(3) -linked up in both RX and TX direction
4. invalid(-1) …

Enumeration

Enumerated Values:

-1	invalid
1	down
2	rxUp
3	up

.1.3.6.1.4.1.2011.5.14.6.7.1.7

hwOpticsSmartSFPLocalLoopback

Indicates the loopback control of a local smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -local outward loop back
3. local(3) -local inward loop back
4. invalid(-1) -invalid val…

Enumerationr/w

Enumerated Values:

-1	invalid
1	noloop
2	remote
3	local

.1.3.6.1.4.1.2011.5.14.6.7.1.8

hwOpticsSmartSFPRemoteLoopback

Indicates the loopback control of a remote smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -remote outward loop back
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	noloop
2	remote

.1.3.6.1.4.1.2011.5.14.6.7.1.9

hwOpticsSmartSFPDyingGaspStatus

Indicates the dying-gasp status of a remote smart SFP optical module.
Options:
1. poweron(1) -remote normal power
2. poweroff(2) -remote Dying-Gasp asserted
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	poweron
2	poweroff

.1.3.6.1.4.1.2011.5.14.6.7.1.10

hwOpticsSmartSFPLocalRXOutputControl

Indicates the local output control of a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. disableRxLos(3) -disable when LOS asserted
4. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	disable
2	enable
3	disableRxLos

.1.3.6.1.4.1.2011.5.14.6.7.1.11

hwOpticsSmartSFPPilottoneControl

Indicates control of outputting attenuation signals by a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	disable
2	enable

.1.3.6.1.4.1.2011.5.14.6.7.1.12

hwOpticsSmartSFPPilottoneStatus

Indicates the carrier loopback detection status of a smart SFP optical module.
Options:
1. noSignal(1) -no signal
2. toneDetected(2) -tone detected
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	noSignal
2	toneDetected

.1.3.6.1.4.1.2011.5.14.6.7.1.13

hwOpticsSmartSFPLoopbackdeviceloss

Indicates the optical attenuation of a remote loopback device.
Range: -1, 0-25500.
-1 is the invalid value.
Unit: 0.01db

0.01dbInteger32

Constraints:
range: -1-25500

.1.3.6.1.4.1.2011.5.14.6.7.1.14

hwOpticsSmartSFPRoundtripfiberloss

Indicates the optical attenuation of an optical path.
Range: -1, 0-25500.
-1 is the invalid value.
Unit: 0.01db

0.01dbInteger32

Constraints:
range: -1-25500

.1.3.6.1.4.1.2011.5.14.6.7.1.15

hwOpticsSmartSFPExtModuleInfoRemote

Indicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	remote

.1.3.6.1.4.1.2011.5.14.6.7.1.16

hwOpticsSmartSFPConfigTable

table

.1.3.6.1.4.1.2011.5.14.6.8 · 1 row entry · 1 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsSmartSFPConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsSmartSFPConfigTable'

Indicates the configured parameter table of a smart SFP optical module.
It is used for querying and setting the configured parameters of a smart SFP optical module.
This table supports only the smart SFP 2 optical module.
The index of this table is ifIndex.

hwOpticsSmartSFPConfigEntry row .1.3.6.1.4.1.2011.5.14.6.8.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwOpticsSmartSFPIILoopOpticloss Indicates the optical attenuation of a remote loopback device. Unit: 0.01db. Range: -1, 0-25500. -1 is the invalid value. Default: 1400.	0.01dbInteger32r/w Constraints: `range: -1-25500`	`.1.3.6.1.4.1.2011.5.14.6.8.1.1`

hwOpticsModuleThresholdTable

table

.1.3.6.1.4.1.2011.5.14.6.9 · 1 row entry · 16 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsModuleThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsModuleThresholdTable'

It is used for querying the default value of optical power and parameter 
threshold of an Ethernet port.
The index of this table is ifindex.

hwOpticsModuleThresholdEntry row .1.3.6.1.4.1.2011.5.14.6.9.1

It is used for querying the default value of optical power and parameter
threshold of an Ethernet port.
The index of this entry is ifindex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwOpticsModuleThresholdTxLower TX optical power lower limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.1`
hwOpticsModuleThresholdTxUpper TX optical power upper limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.2`
hwOpticsModuleThresholdRxUpper RX optical power upper limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.3`
hwOpticsModuleThresholdRxLower RX optical power lower limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.4`
hwOpticsModuleThresholdTempLower Optical temperature lower limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001C	0.000001CSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.5`
hwOpticsModuleThresholdTempUpper Optical temperature upper limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001C	0.000001CSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.6`
hwOpticsModuleThresholdVoltageLower Optical voltage lower limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001V	0.000001VSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.7`
hwOpticsModuleThresholdVoltageUpper Optical voltage upper limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001V	0.000001VSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.8`
hwOpticsModuleThresholdCurrentLower Optical current lower limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001A	0.000001ASNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.9`
hwOpticsModuleThresholdCurrentUpper Optical current upper limit threshold value. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001A	0.000001ASNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.10`
hwOpticsModuleThresholdLaserTempLower Lower optical laser temperature threshold. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001C	0.000001CSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.11`
hwOpticsModuleThresholdLaserTempUpper Upper optical laser temperature threshold. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001C	0.000001CSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.12`
hwOpticsModuleThresholdWaveLengthLower Lower optical laser wavelength threshold. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.01nm	0.01nmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.13`
hwOpticsModuleThresholdWaveLengthUpper Upper optical laser wavelength threshold. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.01nm	0.01nmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.14`
hwOpticsModuleThresholdTecCurrentLower Lower threshold for the thermoelectric cooler current. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001A	0.000001ASNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.15`
hwOpticsModuleThresholdTecCurrentUpper Upper threshold for the thermoelectric cooler current. 1. 2147483647 -invalid value, an invalid value is returned if the threshold is not exist. Unit: 0.000001A	0.000001ASNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.9.1.16`

hwOpticsChannelDdmInformationTable

table

.1.3.6.1.4.1.2011.5.14.6.10 · 1 row entry · 4 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOpticsChannelDdmInformationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHERNET-OPTICMODULE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHERNET-OPTICMODULE-MIB::hwOpticsChannelDdmInformationTable'

It is used for querying the optical module channel Ddm Information of an Ethernet port.
The index of this table are ifIndex and hwOpticsModuleChannelIndex.

hwOpticsChannelDdmInformationEntry row .1.3.6.1.4.1.2011.5.14.6.10.1

It is used for querying the optical module channel Ddm Information of an Ethernet port.
The index of this table are ifindex and hwOpticsModuleChannelIndex.

Indexes

IF-MIBifIndex hwOpticsModuleChannelIndex

Column	Syntax	OID
hwOpticsModuleChannelIndex Optical module channel Index. 1~4 for 100G optical module.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.10.1.1`
hwOpticsModuleChannleTxBiasCurrent Transmitted bias current. Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported. Unit: 0.000001mA	0.000001mASNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.10.1.2`
hwOpticsModuleChannleTxPower Transmitted power. Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.10.1.3`
hwOpticsModuleChannleRxPower Received power. Invalid value: 2147483647, an invalid value is returned if the optical module is unavailable or is not supported. Unit: 0.000001dBm	0.000001dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.14.6.10.1.4`