HUAWEI-EPONNNI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
85
.1.3.6.1.4.1.2011.6.119.1.1.1 · 1 row entry · 27 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEponnniCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-EPONNNI-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-EPONNNI-MIB::hwEponnniCfgTable'
The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset.
The index of this table is ifIndex.
hwEponnniCfgEntry row .1.3.6.1.4.1.2011.6.119.1.1.1.1
The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
Describes the laser mode,
Options:
1. auto(0) - EPON NNI laser auto
2. off(1) - EPON NNI laser off
3. on(2) - EPON NNI laser on
Enumerationr/w
Enumerated Values:
0auto
1off
2on
.1.3.6.1.4.1.2011.6.119.1.1.1.1.1
Reset the sub board of EPON.
Options:
1. reset(1) - Reset the sub board
Enumerationr/w
Enumerated Values:
1reset
.1.3.6.1.4.1.2011.6.119.1.1.1.1.2
Describes the port link status,
Options:
1. linkDown(1) - Can't receive optic signal
2. linkUp(2) - Received optic signal
Enumeration
Enumerated Values:
1linkDown
2linkUp
.1.3.6.1.4.1.2011.6.119.1.1.1.1.3
Describes the port register status,
Options:
1. registered(1) - The port is authenticated successfully
2. unregistered(2) - The port fails to be authenticated
Enumeration
Enumerated Values:
1registered
2unregistered
.1.3.6.1.4.1.2011.6.119.1.1.1.1.4
The port up stream speed.
Unit:Mbps
MbpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.1.1.1.5
The port down stream speed.
Unit:Mbps
MbpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.1.1.1.6
The MAC address of EPON chipset.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.6.119.1.1.1.1.7
The hardware version of EPON chipset.
OctetString .1.3.6.1.4.1.2011.6.119.1.1.1.1.8
The firmware version of EPON chipset.
OctetString .1.3.6.1.4.1.2011.6.119.1.1.1.1.9
The OAM version of EPON chipset.
OctetString .1.3.6.1.4.1.2011.6.119.1.1.1.1.10
Traffic Broadcast of Eponnni Port,0 is off, 13 is complete.
Traffic suppression ID definition:

NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
1 6 …
Integer32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.6.119.1.1.1.1.11
Traffic Multicast of Eponnni Port,0 is off, 13 is complete.
Traffic suppression ID definition:

NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
1 6 …
Integer32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.6.119.1.1.1.1.12
Traffic unicast of Eponnni Port,0 is off, 13 is complete.
Traffic suppression ID definition:

NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
1 …
Integer32r/w
Constraints:
range: 0-13
.1.3.6.1.4.1.2011.6.119.1.1.1.1.13
The MDU TX power. It ranges from -10000 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.1.1.1.14
The MDU RX power. It ranges from -10000 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.1.1.1.15
The MDU Temperature. It ranges from -10000 to 10000 units of 1/100 C.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.1.1.1.16
The MDU Laser Bias Electricity. It ranges from -10000 to 10000 units of 1/100 mA.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.1.1.1.17
The MDU Voltage. It ranges from -10000 to 10000 units of 1/100 mV.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.1.1.1.18
The password of the EPON ONU.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.2011.6.119.1.1.1.1.19
Indicates whether the optical port is shut down due to the continuous mode(rogue ONT).
Options:
1. yes(1) - Port is shut down due to the continuous mode
2. no(2) - Port is not shut down due to the continuous mode
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.2011.6.119.1.1.1.1.20
Describes the EPONNNI port TYPED protect state.
Options:
1. active(1) - Active state
2. standby(2) - Standby state
Enumeration
Enumerated Values:
1active
2standby
.1.3.6.1.4.1.2011.6.119.1.1.1.1.21
The loid of the EPON ONU.
OctetStringr/w
Constraints:
range: 0-24
.1.3.6.1.4.1.2011.6.119.1.1.1.1.22
The checkcode of the EPON ONU.
OctetStringr/w
Constraints:
range: 0-12
.1.3.6.1.4.1.2011.6.119.1.1.1.1.23
This object indicates the type of the optical transceiver.
Options:
1. unknown(1) - Unknow
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) - 10G EPON
5. gpon10g(5) - 10G GPON
6. wdmpon(6) - WDM PON
Enumeration
Enumerated Values:
-1invalid
1unknown
2gpon
3epon
4epon10g
5gpon10g
6wdmpon
7hybridpon
8gponepon
.1.3.6.1.4.1.2011.6.119.1.1.1.1.24
This object indicates the sub type of the optical transceiver.
Options:
1.unknown(1) - Unknow
2.classbplus(101) - CLASS B+
3.classcplus(102) - CLASS C+
4.classb(103) …
Enumeration
Enumerated Values:
-1invalid
1unknown
101classbplus
102classcplus
103classb
201px20
202px20plus
301pr30
302pr20
303prx30
304prx20
701classbplusandpx20plus
.1.3.6.1.4.1.2011.6.119.1.1.1.1.25
This object indicates the application scenario of the optical transceiver.
Options:
1.unknown(1) - Unknow
2.olt(2) - OLT
3.ont(3) - ONT, This enumeration is obsolete.
4.onu(4) - ONU
5.invalid(-1)…
Enumeration
Enumerated Values:
-1invalid
1unknown
2olt
3ont
4onu
.1.3.6.1.4.1.2011.6.119.1.1.1.1.26
This object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SFF 2x10
4. sfp(4) - SFP
5. xfp(5) -…
Enumeration
Enumerated Values:
-1invalid
1unknown
2sff2x5
3sff2x10
4sfp
5xfp
6lxfp
7bosaonboard
.1.3.6.1.4.1.2011.6.119.1.1.1.1.27
.1.3.6.1.4.1.2011.6.119.1.2.1 · 1 row entry · 37 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEponnniStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-EPONNNI-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-EPONNNI-MIB::hwEponnniStatisticsTable'
This table is used to query the statistics of the EPON port.
The index of this table is ifIndex.
hwEponnniStatisticsEntry row .1.3.6.1.4.1.2011.6.119.1.2.1.1
This table is used to query the statistics of the EPON port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
The PON port send OK frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.1
The PON received OK frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.2
The PON received FEC error frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.3
The PON received HEC error frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.4
The PON send PQ drop frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.5
The UNI send OK frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.6
The UNI received OK frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.7
The UNI received FEC error frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.8
The UNI send PQ drop frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.9
Clear the statistics of EPON NNI,
Options:
1. resetStat(1) - Clear the statistics
Enumerationr/w
Enumerated Values:
1resetStat
.1.3.6.1.4.1.2011.6.119.1.2.1.1.10
The UNI send OK Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.2.1.1.11
The UNI received OK Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.2.1.1.12
The PON received unicast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.13
The PON received multicast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.14
The PON received broadcast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.15
The PON received frames of 64 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.16
The PON received frames of 65~127 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.17
The PON received frames of 128~255 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.18
The PON received frames of 256~511 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.19
The PON received frames of 512~1023 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.20
The PON received frames of 1024~1518 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.21
The PON received frames of over 1518 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.22
The PON received under size frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.23
The PON received over size frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.24
The PON received crc error frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.25
The PON received discarded frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.26
The PON send unicast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.27
The PON send multicast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.28
The PON send broadcast frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.29
The PON send frames of 64 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.30
The PON send frames of 65~127 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.31
The PON send frames of 128~255 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.32
The PON send frames of 256~511 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.33
The PON send frames of 512~1023 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.34
The PON send frames of 1024~1518 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.35
The PON send frames of over 1518 bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.36
The PON received error frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.6.119.1.2.1.1.37
.1.3.6.1.4.1.2011.6.119.1.3.1 · 1 row entry · 10 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEponNniHistoryStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-EPONNNI-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-EPONNNI-MIB::hwEponNniHistoryStatsTable'
This table provides the performance statistics of the EPON port:
current 24-hour performance statistics, history 30 24-hour performance statistics,
current 15-minute performance statistics, and history 96 15-minute performance statistics.
The indexes of this table are ifIndex, hwEponStatsIntervalType, hwEponStatsIntervalNum.
hwEponNniHistoryStatsEntry row .1.3.6.1.4.1.2011.6.119.1.3.1.1
This table provides the performance statistics of the EPON port:
current 24-hour performance statistics, history 30 24-hour performance statistics,
current 15-minute performance statistics, and history 96 15-minute perf…
Column Syntax OID
Describes the type of EponNni History Statistic,
Options:
1. intervaltime15min(0) - The EponNNI History Statistic in 15 minutes
2. intervaltime24h(1) - The EponNNI History Statistic in 24 hours
3. everbefore(2) …
Enumeration
Enumerated Values:
0intervaltime15min
1intervaltime24h
2everbefore
.1.3.6.1.4.1.2011.6.119.1.3.1.1.1
The interval number of EponNni History Statistic.
When IntervalType is 15 minutes, IntervalNum is 0 - 96.
When IntervalType is 24 hours, IntervalNum is 0 - 30.
0 indicates the statistics in the current interval.
The gre…
Integer32
Constraints:
range: 0-96
.1.3.6.1.4.1.2011.6.119.1.3.1.1.2
Number of received MPCP frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.3
Number of received OAMPDU frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.4
Total number of received octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.5
Total number of received frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.6
Total number of transmited octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.7
Total number of transmited frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.6.119.1.3.1.1.8
Indicates the data statistic seconds in this period.
This leaf object is valid when IntervalNum is 0 (namely, the current
15 minutes and the current 24 hours).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.3.1.1.9
Whether the interval number is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2011.6.119.1.3.1.1.10
.1.3.6.1.4.1.2011.6.119.1.4.1 · 1 row entry · 11 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEponnniAlarmThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-EPONNNI-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-EPONNNI-MIB::hwEponnniAlarmThresholdTable'
The table EponNni optical module alarm threshold.This table is used to set
and query the low alarm threshold, the high alarm threshold of eponnni.
The index of this table is ifIndex.
hwEponnniAlarmThresholdEntry row .1.3.6.1.4.1.2011.6.119.1.4.1.1
The table EponNni optical module alarm threshold. This table is used to set
and query the low alarm threshold, the high alarm threshold of eponnni.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
The MDU Rx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.1
The MDU Rx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.2
The MDU Tx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.3
The MDU Tx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.4
The MDU Bias upper limit threshold. It ranges from 0 to 10000 units of mA.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.5
The MDU Bias lower limit threshold. It ranges from 0 to 10000 units of mA.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.6
The MDU Temperature upper limit threshold. It ranges from -9900 to 30000 units of 1/100 C.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.7
The MDU Temperature lower limit threshold. It ranges from -9900 to 30000 units of 1/100 C.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.8
The MDU Voltage upper limit threshold. It ranges from 0 to 10000 units of 1/100 V.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.9
The MDU Voltage lower limit threshold. It ranges from 0 to 10000 units of 1/100 V.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.6.119.1.4.1.1.10
Clear the MDU threshold.
Options:
1. invalid(0) - The MDU threshold clear state is invalid.
2. clear(1) - Clear the MDU threshold.
3. cleared(32767) - The MDU threshold is cleared.
Enumerationr/w
Enumerated Values:
0invalid
1clear
32767cleared
.1.3.6.1.4.1.2011.6.119.1.4.1.1.11