HUAWEI-ENT-VOICE-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
71

hwEntFxsPortConfigTable

table
.1.3.6.1.4.1.2011.5.25.252.1 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntFxsPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntFxsPortConfigTable' 
Indicates the attribute configuration table of fxs ports.
hwEntFxsPortConfigEntry row .1.3.6.1.4.1.2011.5.25.252.1.1
Indicates the attribute configuration entry of fxs ports.
Indexes
Column Syntax OID
hwEntFxsPortIndex
Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.1.1.1
hwEntFxsPortSendGain
Indicates the send gain the fxs port.
0: 5 dB
1: 4.5 dB
2: 4 dB
3: 3.5 dB
4: 3 dB
5: 2.5 dB
6: 2 dB
7: 1.5 dB
8: 1 dB
9: 0.5 dB
10: 0 dB
11: -0.5 dB
12: -1 dB
13: -1.5 dB
14: -2 dB
1…
Integer32r/w
Constraints:
range: 0-22
 .1.3.6.1.4.1.2011.5.25.252.1.1.2
hwEntFxsPortRecvGain
Indicates the receive gain the fxs port.
0: 0 dB
1: -0.5 dB
2: -1 dB
3: -1.5 dB
4: -2 dB
5: -2.5 dB
6: -3 dB
7: -3.5 dB
8: -4 dB
9: -4.5 dB
10: -5 dB
11: -5.5 dB
…
Integer32r/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.5.25.252.1.1.3
hwEntFxsPortDialMode
Indicates the dialing mode.
Options:
dtmfPulseBoth(1) -DTMF pulse both
dtmfOnly(2) -DTMF only
pulseOnly(3) -Pulse only
Default: dtmfPulseBoth(1)
Enumerationr/w
Enumerated Values:
1dtmfPulseBoth
2dtmfOnly
3pulseOnly
 .1.3.6.1.4.1.2011.5.25.252.1.1.4
hwEntFxsPortReversePoleEnable
Indicates whether to support the polarity-reversing pulse.
Options:
enable(1)
disable(2)
Default: enable(1)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.1.1.5
hwEntFxsPortReversePoleLevel
Indicates the level width of the polarity-reversing pulse.
Default: 100
Unit: ms
Step: 10 ms.
Integer32r/w
Constraints:
range: 20-1270
 .1.3.6.1.4.1.2011.5.25.252.1.1.6
hwEntFxsPortPolarityReverseMode
Indicates the polarity reversal mode.
Options:
hard(1) -Hard polarity reversal
soft(2) -Soft polarity reversal
Default: hard(1)
Enumerationr/w
Enumerated Values:
1hard
2soft
 .1.3.6.1.4.1.2011.5.25.252.1.1.7
hwEntFxsPortLineLock
Indicates whether to support lock port.
enable(1)
disable(2)
Default: enable(1)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.1.1.8
hwEntFxsPortNlpMode
Indicates the Nlp mode of the port.
normal(1) -Normal mode
ecGainAdjust(2) -Ec gain adjust mode
enhance(3) -Enhance mode
reduce(4) -Reduce mode
disable(5): -Close mode
Default: normal(1)
Enumerationr/w
Enumerated Values:
1normal
2ecGainAdjust
3enhance
4reduce
5disable
 .1.3.6.1.4.1.2011.5.25.252.1.1.9
hwEntFxsPortClipReversePole
Indicates whether to support the polarity-reversing pulse when Clip.
enable(1)
disable(2)
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.1.1.10
hwEntFxsPortImpedance
Indicates the port impedance of the board.
Each value corresponds to the required impedance in a specified scenario.
0: Bureau machine in China (200+680|| 100nf)
1: User machine in China (200+560|| 100nf)
2: 600-ohm …
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.25.252.1.1.11
hwEntFxsPortCurrent
Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value.
0: 16mA steady current
1: 20mA steady current
Default: 1
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.252.1.1.12
hwEntFxsPortHighLevel
Indicates the high power level width.
Default: 100
Unit: ms
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.5.25.252.1.1.13
hwEntFxsPortLowLevel
Indicates the low power level width.
Default: 300
Unit: ms
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.5.25.252.1.1.14
hwEntFxsPortKcType
Indicates the KC type.
Options:
1. type16kc(1)
2. type12kc(2)
Default: type16kc(1)
Enumerationr/w
Enumerated Values:
1type16kc
2type12kc
 .1.3.6.1.4.1.2011.5.25.252.1.1.15
hwEntFxsPortVoltage
Indicates the valid voltage value of KC.
0: 0.45 Vrms
1: 0.775 Vrms
2: 1.0 Vrms
3: 1.5 Vrms
4: 2.0 Vrms
5: 2.5 Vrms
6: 3.0 Vrms
7: 3.5 Vrms
8: 4.0 Vrms
9: 4.5 Vrms
…
Integer32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.2011.5.25.252.1.1.16
hwEntFxsPortActualSendGain
Indicates the actual send gain of the fxs port.
0: 5 dB
1: 4.5 dB
2: 4 dB
3: 3.5 dB
4: 3 dB
5: 2.5 dB
6: 2 dB
7: 1.5 dB
8: 1 dB
9: 0.5 dB
10: 0 dB
11: -0.5 dB
12: -1 dB
1…
Integer32
Constraints:
range: 255-255
range: 0-22
 .1.3.6.1.4.1.2011.5.25.252.1.1.17
hwEntFxsPortActualRecvGain
Indicates the actual receive gain of the fxs port.
0: 0 dB
1: -0.5 dB
2: -1 dB
3: -1.5 dB
4: -2 dB
5: -2.5 dB
6: -3 dB
7: -3.5 dB
8: -4 dB
9: -4.5 dB
10: …
Integer32
Constraints:
range: 255-255
range: 0-24
 .1.3.6.1.4.1.2011.5.25.252.1.1.18

hwEntFxsPortOperTable

table
.1.3.6.1.4.1.2011.5.25.252.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntFxsPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntFxsPortOperTable' 
Indicates the operation table (management, maintenance, and status query) of the fxs ports.
hwEntFxsPortOperEntry row .1.3.6.1.4.1.2011.5.25.252.2.1
Indicates the operation entry (management, maintenance, and status query) of the fxs ports.
Indexes
Column Syntax OID
hwEntFxsPortOperIndex
Indicates the FxsPortOper index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.2.1.1
hwEntFxsPortSrvState
Indicates state of the fxs port.
Options:
normal(1)
fault(2)
deactive(3)
powerdeny(4)
Enumeration
Enumerated Values:
1normal
2fault
3deactive
4powerdeny
 .1.3.6.1.4.1.2011.5.25.252.2.1.2
hwEntFxsPortAdminState
Indicates admin state of the fxs port.
Options:
noLoopNoTest(1)
noLoopTest(2)
localLoopNoTest(3)
localLoopTest(4)
remoteLoopNoTest(5)
remoteLoopTest(6)
Enumeration
Enumerated Values:
1noLoopNoTest
2noLoopTest
3localLoopNoTest
4localLoopTest
5remoteLoopNoTest
6remoteLoopTest
 .1.3.6.1.4.1.2011.5.25.252.2.1.3
hwEntFxsPortLineState
Indicates line state of the fxs port.
Options:
normal(1)
onEarth(2)
unknown(3)
Enumeration
Enumerated Values:
1normal
2onEarth
3unknown
 .1.3.6.1.4.1.2011.5.25.252.2.1.4
hwEntFxsPortAdminOper
Indicates operation type the fxs port.
Options:
remoteLoop(1)
localLoop(2)
cancelLoop(3)
Enumerationr/w
Enumerated Values:
1remoteLoop
2localLoop
3cancelLoop
 .1.3.6.1.4.1.2011.5.25.252.2.1.5

hwEntBraPortConfigTable

table
.1.3.6.1.4.1.2011.5.25.252.3 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntBraPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntBraPortConfigTable' 
Indicates the attribute configuration table of the bra port.
hwEntBraPortConfigEntry row .1.3.6.1.4.1.2011.5.25.252.3.1
Indicates the attribute configuration entry of the bra port.
Indexes
Column Syntax OID
hwEntBraPortIndex
Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.3.1.1
hwEntBraPortRemotePower
Indicates whether to support remote power supply.
Options:
enable(1) -Supported
disable(2) -Not supported
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.3.1.2
hwEntBraPortAutoDeactive
Indicates whether to support automatic deactivation.
Options:
enable(1) -Supported
disable(2) -Not supported
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.3.1.3
hwEntBraPortAutoDeactiveDelay
Indicates the automatic deactivation delay of the bra port.
Default: 30
Unit: second.
Integer32r/w
Constraints:
range: 10-360
 .1.3.6.1.4.1.2011.5.25.252.3.1.4
hwEntBraPortWorkMode
Indicates the bra port working mode.
p2mp(1) -Point to multi-point
p2p(2) -Point to point
Default: p2mp(1)
Enumerationr/w
Enumerated Values:
1p2mp
2p2p
 .1.3.6.1.4.1.2011.5.25.252.3.1.5
hwEntBraPortL1ActiveMode
Indicates layer 1 active mode of the bra port.
Options:
stable(1)
unstable(2)
Default: unstable(2).
Enumerationr/w
Enumerated Values:
1stable
2unstable
 .1.3.6.1.4.1.2011.5.25.252.3.1.6
hwEntBraPortUniAlarmReport
Indicates whether to support user network interface fault alarm.
enable(1) -Supported
disable(2) -Not supported
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.3.1.7
hwEntBraPortL2Monitor
Indicates whether to support layer 2 error statistic.
enable(1) -Supported
disable(2) -Not supported
Default: enable(1)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.3.1.8

hwEntBraPortOperTable

table
.1.3.6.1.4.1.2011.5.25.252.4 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntBraPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntBraPortOperTable' 
Indicates the operation table (management, maintenance, and status query) of the bra ports.
hwEntBraPortOperEntry row .1.3.6.1.4.1.2011.5.25.252.4.1
Indicates the operation entry (management, maintenance, and status query) of the bra ports.
Indexes
Column Syntax OID
hwEntBraPortOperIndex
Indicates the BrPortOper index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.4.1.1
hwEntBraPortSrvState
Indicates state of the bra port.
Options:
normal(1)
fault(2)
deactive(3)
powerdeny(4)
Enumeration
Enumerated Values:
1normal
2fault
3deactive
4powerdeny
 .1.3.6.1.4.1.2011.5.25.252.4.1.2
hwEntBraPortAdminState
Indicates admin state of the bra port.
Options:
noLoopNoTest(1)
noLoopTest(2)
localLoopNoTest(3)
localLoopTest(4)
remoteLoopNoTest(5)
remoteLoopTest(6)
Enumeration
Enumerated Values:
1noLoopNoTest
2noLoopTest
3localLoopNoTest
4localLoopTest
5remoteLoopNoTest
6remoteLoopTest
 .1.3.6.1.4.1.2011.5.25.252.4.1.3
hwEntBraPortAlarmState
Indicates the alarm state of the bra port, from left to right, each bit represents one alarm state.
0 means no alarm present,1 means the alarm present.
bit0: LT overload
bit1: S port fault(EI2)
bit2: U port fault(LOS/RS…
Bits
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
 .1.3.6.1.4.1.2011.5.25.252.4.1.4
hwEntBraPortAdminOper
Indicates operation type the bra port.
Options:
remoteLoop(1)
localLoop(2)
cancelLoop(3)
Enumerationr/w
Enumerated Values:
1remoteLoop
2localLoop
3cancelLoop
 .1.3.6.1.4.1.2011.5.25.252.4.1.5

hwEntVe1PortConfigTable

table
.1.3.6.1.4.1.2011.5.25.252.5 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntVe1PortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortConfigTable' 
Indicates the attribute configuration table of the ve1 ports.
hwEntVe1PortConfigEntry row .1.3.6.1.4.1.2011.5.25.252.5.1
Indicates the attribute configuration entry of the ve1 ports.
Indexes
Column Syntax OID
hwEntVe1PortIndex
Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.5.1.1
hwEntVe1PortFrameCheckMode
Indicates the CRC4 frame check mode of the ve1 port.
Options:
enable(1)
disable(2)
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.5.1.2
hwEntVe1PortImpedance
Indicates impedance of the ve1 port.
Options:
ohm75(1)
ohm120(2)
Default: ohm75(1)
Enumerationr/w
Enumerated Values:
1ohm75
2ohm120
 .1.3.6.1.4.1.2011.5.25.252.5.1.3
hwEntVe1PortSignalType
Indicates signal type of the ve1 port.
Options:
ccs(1)
cas(2)
Default: ccs(1)
Enumerationr/w
Enumerated Values:
1ccs
2cas
 .1.3.6.1.4.1.2011.5.25.252.5.1.4
hwEntVe1PortAccessMode
Indicates physical layer digital section access mode of the ve1 port.
Options:
digitalAccess(1)
directAccess(2)
Default:digitalAccess(1)
Enumerationr/w
Enumerated Values:
1digitalAccess
2directAccess
 .1.3.6.1.4.1.2011.5.25.252.5.1.5
hwEntVe1PortL2Monitor
Indicates whether to support layer 2 error statistic of the ve1 port.
enable(1)
disable(2)
Default: enable(1).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.252.5.1.6
hwEntVe1PortErrAlarmSwitch
Indicates ve1 error alarm switches, from left to right, each bit respresent a switch.
0 means disable, 1 means enable.
bit0: report pcm line fault alarm.
bit1: when error rate reached ULF(Unconditional Line Failure…
Bitsr/w
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
5bit5
 .1.3.6.1.4.1.2011.5.25.252.5.1.7

hwEntVe1PortOperTable

table
.1.3.6.1.4.1.2011.5.25.252.6 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntVe1PortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortOperTable' 
Indicates the operation table (management, maintenance, and status query) of the ve1 ports.
hwEntVe1PortOperEntry row .1.3.6.1.4.1.2011.5.25.252.6.1
Indicates the operation entry (management, maintenance, and status query) of the ve1 ports.
Indexes
Column Syntax OID
hwEntVe1PortOperIndex
Indicates the Ve1PortOper index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.6.1.1
hwEntVe1PortSrvState
Indicates state of the ve1 port.
Options:
normal(1)
fault(2)
lineAbnormal(3)
powerdeny(4)
Enumeration
Enumerated Values:
1normal
2fault
3lineAbnormal
4powerdeny
 .1.3.6.1.4.1.2011.5.25.252.6.1.2
hwEntVe1PortAdminState
Indicates admin state of the ve1 port.
Options:
noLoopNoTest(1)
noLoopTest(2)
localLoopNoTest(3)
localLoopTest(4)
remoteLoopNoTest(5)
remoteLoopTest(6)
Enumeration
Enumerated Values:
1noLoopNoTest
2noLoopTest
3localLoopNoTest
4localLoopTest
5remoteLoopNoTest
6remoteLoopTest
 .1.3.6.1.4.1.2011.5.25.252.6.1.3
hwEntVe1PortWarningState
Indicates the alarm status of the ve1 line.
0 means no alarm present, 1 means the alarm present.
bit0: LOS alarm
bit1: AIS alarm
bit2: LFA alarm
bit3: LMFA alarm
bit4: RRA alarm
bit5: CRCER alar…
Bits
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
5bit5
6bit6
7bit7
8bit8
9bit9
10bit10
11bit11
12bit12
13bit13
14bit14
15bit15
 .1.3.6.1.4.1.2011.5.25.252.6.1.4
hwEntVe1PortAdminOper
Indicates operation type of the ve1 port.
Options:
remoteLoop(1)
localLoop(2)
cancelLoop(3)
Enumerationr/w
Enumerated Values:
1remoteLoop
2localLoop
3cancelLoop
 .1.3.6.1.4.1.2011.5.25.252.6.1.5

hwEntVe1PortL1AlarmThresholdTable

table
.1.3.6.1.4.1.2011.5.25.252.7 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntVe1PortL1AlarmThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortL1AlarmThresholdTable' 
degrade alarm threshold config table of ve1 port.
hwEntVe1PortL1AlarmThresholdEntry row .1.3.6.1.4.1.2011.5.25.252.7.1
degrade alarm threshold config entry of ve1 port.
Indexes
Column Syntax OID
hwEntVe1PortL1AlarmThresholdIndex
Indicates the Ve1PortOper index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.7.1.1
hwEntVe1PortDmAlarmThreshold
Indicates the degrade minute alarm threshold.
Default: 8
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.25.252.7.1.2
hwEntVe1PortEsAlarmThreshold
Indicates the error second alarm threshold.
Default: 432
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.2011.5.25.252.7.1.3
hwEntVe1PortCsesAlarmThreshold
Indicates the sequential severe error second alarm threshold.
Default: 4
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.25.252.7.1.4

hwEntFxoPortConfigTable

table
.1.3.6.1.4.1.2011.5.25.252.8 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntFxoPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntFxoPortConfigTable' 
Indicates the attribute configuration table of fxo ports.
hwEntFxoPortConfigEntry row .1.3.6.1.4.1.2011.5.25.252.8.1
Indicates the attribute configuration entry of fxo ports.
Indexes
Column Syntax OID
hwEntFxoPortIndex
Indicates the slot/subcard/port index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.8.1.1
hwEntFxoPortSendGain
Indicates send gain of the fxo port.
0: 13.5dB, 1: 13.0dB, 2: 12.5dB
3: 12.0dB, 4: 11.5dB, 5: 11.0dB
6: 10.5dB, 7: 10.0dB, 8: 9.5dB
9: 9.0dB, 10: 8.5dB, 11: 8.0dB
12: 7.5dB, 13: 7.…
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.25.252.8.1.2
hwEntFxoPortRecvGain
Indicates receive gain of the fxo port.
0: 13.5dB, 1: 13.0dB, 2: 12.5dB
3: 12.0dB, 4: 11.5dB, 5: 11.0dB
6: 10.5dB, 7: 10.0dB, 8: 9.5dB
9: 9.0dB, 10: 8.5dB, 11: 8.0dB
12: 7.5dB, 13: …
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.25.252.8.1.3
hwEntFxoPortDcImpedance
Indicates DC impedance of the fxo port.
0: 50
1: 800
Default: 0
Unit: Om
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.252.8.1.4
hwEntFxoPortAcImpedance
Indicates AC impedance of the fxo port.
0: 600
1: 900
2: 270 + (750 || 150 nF) and 275 + (780 || 150 nF)
3: 220 + (820 || 120 nF) and 220 + (820 || 115 nF)
4: 370 + (620 || 310 nF)
5: 320 + (1050 || 230 nF)
6: 3…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.25.252.8.1.5
hwEntFxoPortRingMinDuration
Indicates the min of the ring duration time.
0: 100ms
1: 150ms
2: 200ms
3: 256ms
4: 384ms
5: 512ms
6: 640ms
7: 1024ms
Default: 2
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.25.252.8.1.6
hwEntFxoPortRingMaxInterval
Indicates the max of the ring interval time.
0: not use, 1: 128ms, 2: 256ms, 3: 284ms
4: 512ms, 5: 640ms, 6: 768ms, 7: 896ms
8: 1024ms, 9: 1152ms, 10: 1280ms, 11: 1408ms
12: 1536ms, 13: …
Integer32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.252.8.1.7
hwEntFxoPortRingFrequency
Indicates the ring frequency.
0: 16Hz
1: 25Hz
2: 50Hz
Default: 1
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.5.25.252.8.1.8
hwEntFxoPortRingAcAmplitude
Indicates the ring of the AC amplitude.
0: 74V
1: 65V
2: 50V
Default: 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.5.25.252.8.1.9
hwEntFxoPortRingOffset
Indicates the ring offset.
0-100: -50V ~ 50V
Default: 70
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.252.8.1.10
hwEntFxoPortFeedMaxVoltage
Indicates the max feed voltage.
Default: -20
Unit:V
Integer32r/w
Constraints:
range: -100-0
 .1.3.6.1.4.1.2011.5.25.252.8.1.11
hwEntFxoPortFeedMinVoltage
Indicates the min feed voltage.
Default: -80
Unit:V
Integer32r/w
Constraints:
range: -100-0
 .1.3.6.1.4.1.2011.5.25.252.8.1.12
hwEntFxoPortFeedMaxCurrent
Indicates the max feed current.
0: 25mA
1: 30mA
2: 35mA
3: 40mA
Default: 2
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.2011.5.25.252.8.1.13
hwEntFxoPortFeedMinCurrent
Indicates the min of the PTP feed current.
0: 16mA
1: 17mA
2: 18mA
3: 19mA
4: 20mA
Default: 0
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.2011.5.25.252.8.1.14

hwEntFxoPortOperTable

table
.1.3.6.1.4.1.2011.5.25.252.9 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntFxoPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-PORT-MIB::hwEntFxoPortOperTable' 
Indicates the operation table (management, maintenance, and status query) of the fxo ports.
hwEntFxoPortOperEntry row .1.3.6.1.4.1.2011.5.25.252.9.1
Indicates the operation entry (management, maintenance, and status query) of the fxo ports.
Indexes
Column Syntax OID
hwEntFxoPortOperIndex
Indicates the FxsPortOper index.
bits 31-24 (8 bits): reserved
bits 23-16 (8 bits): slot index
bits 15-8 (8 bits): subcard index
bits 7-0 (8 bits): port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.252.9.1.1
hwEntFxoPortSrvState
Indicates state of the fxo port.
Options:
normal(1)
fault(2)
deactive(3)
powredeny(4)
Enumeration
Enumerated Values:
1normal
2fault
3deactive
4powredeny
 .1.3.6.1.4.1.2011.5.25.252.9.1.2
hwEntFxoPortAdminState
Indicates the fxo port Admin state.
Options:
noLoopNoTest(1)
noLoopTest(2)
localLoopNoTest(3)
localLoopTest(4)
remoteLoopNoTest(5)
remoteLoopTest(6)
Enumeration
Enumerated Values:
1noLoopNoTest
2noLoopTest
3localLoopNoTest
4localLoopTest
5remoteLoopNoTest
6remoteLoopTest
 .1.3.6.1.4.1.2011.5.25.252.9.1.3
hwEntFxoPortLineState
Indicates line state of the fxo port.
Options:
normal(1)
fault(2)
unknown(3)
Enumeration
Enumerated Values:
1normal
2fault
3unknown
 .1.3.6.1.4.1.2011.5.25.252.9.1.4
hwEntFxoPortAdminOper
Indicates the operate type.
Options:
remoteLoop(1)
localLoop(2)
cancelLoop(3)
Enumerationr/w
Enumerated Values:
1remoteLoop
2localLoop
3cancelLoop
 .1.3.6.1.4.1.2011.5.25.252.9.1.5