HUAWEI-DSLAM-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
99

hwAclNumGroupTable

table
.1.3.6.1.4.1.2011.5.1.1.2 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclNumGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclNumGroupTable' 
Describes the configured ACL rule groups in the system and basic information about each group, 
such as the number of rules, steps, and ACL rule descriptions. 
The index of this table is hwAclNumGroupAclNum.
hwAclNumGroupEntry row .1.3.6.1.4.1.2011.5.1.1.2.1
Describes the configured ACL rule groups in the system and basic information about each group,
such as the number of rules, steps, and ACL rule descriptions.
The index of this entry is hwAclNumGroupAclNum.
Indexes
Column Syntax OID
hwAclNumGroupAclNum
Uniquely identifies an ACL rule group.
Range: 2000-5999, -1

The ACL rule groups with indexes ranging from 2000 to 2999 are basic ACL rule groups.
When hwAclBasicRuleTable is used to create basic ACL rul…
Integer32
Constraints:
range: 2000-5999
range: -1--1
 .1.3.6.1.4.1.2011.5.1.1.2.1.1
hwAclNumGroupMatchOrder
Indicates the priority order of an ACL rule group.
Options:
1. config(1) -the priority order of an ACL rule group is configuration order
2. auto(2) -the priority order of an ACL rule group is auto
Currently, this le…
Enumeration
Enumerated Values:
1config
2auto
 .1.3.6.1.4.1.2011.5.1.1.2.1.2
hwAclNumGroupSubitemNum
Indicates the number of ACL rules in an ACL rule group. This leaf is read-only.
The value increases by one when an ACL rule is added to the ACL rule group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.1.1.2.1.3
hwAclNumGroupStep
Indicates the step of adding ACL rules to an ACL rule group.
Range: 1-20
When an ACL rule is added and its ID is not specified, the ID of the ACL rule is: step+last ACL rule ID.
If a user does not enter a value for hwA…
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.2011.5.1.1.2.1.4
hwAclNumGroupDescription
Indicates the description of an ACL rule group. It is used for users to identify different ACL rule groups.
Up to 127 characters are supported. If hwAclNumGroupDescription is not set, the description is null by default.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.1.1.2.1.5
hwAclNumGroupCountClear
Used for clearing the software statistics of an ACL rule group.
Options:
1. cleared(1) -clear the software statistics of an ACL rule group
2. nouse(2) -indicates no operation
To clear the software statist…
Enumerationr/w
Enumerated Values:
1cleared
2nouse
 .1.3.6.1.4.1.2011.5.1.1.2.1.6
hwAclNumGroupRowStatus
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an ACL rule group
3. destroy(6) -delete an ACL rule group
It is used for …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.2.1.7
hwAclNumGroupAclType
indicates the type of the ACL group.
Options:
1. basicAcl(2) -Indicates that the type of the ACL group is basic.
2. advAcl(3) -Indicates that the type of the ACL group is advanced.
3. linkAcl(4) -Indicates that th…
Enumerationr/w
Enumerated Values:
2basicAcl
3advAcl
4linkAcl
5userAcl
 .1.3.6.1.4.1.2011.5.1.1.2.1.8
hwAclNumGroupAclNumAllocMethod
indicates the method of allocating the ACL group index automatically.
When this leaf is queried, the value is fixed to minFreeId(1).
Options:
1. minFreeId(1) -means to allocate the ACL group index from the minimal fre…
Enumerationr/w
Enumerated Values:
1minFreeId
2maxFreeId
 .1.3.6.1.4.1.2011.5.1.1.2.1.9

hwAclBasicRuleTable

table
.1.3.6.1.4.1.2011.5.1.1.4 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclBasicRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclBasicRuleTable' 
Describes the details about a basic ACL rule in a basic ACL rule group, 
including the source IP address, mask, and other attributes of the rule. 
          
The indexes of this table are hwAclBasicAclNum and hwAclBasicSubitem. 
hwAclBasicAclNum is the ID of a basic ACL rule group. Make sure that the ID is already created in hwAclNumGroupTable.
hwAclBasicSubitem is the ID of a basic ACL rule in the basic ACL rule group.
hwAclBasicRuleEntry row .1.3.6.1.4.1.2011.5.1.1.4.1
Describes the details about a basic ACL rule in a basic ACL rule group,
including the source IP address, mask, and other attributes of the rule.

The indexes of this entry are hwAclBasicAclNum and hwAclBas…
Indexes
Column Syntax OID
hwAclBasicAclNum
Uniquely identifies a basic ACL rule group.
Range: 2000-2999
Make sure that the ID of the ACL rule group is already created in hwAclNumGroupTable.
Integer32
Constraints:
range: 2000-2999
 .1.3.6.1.4.1.2011.5.1.1.4.1.1
hwAclBasicSubitem
Describes the ID of a basic ACL rule in the basic ACL rule group, uniquely identifying a basic ACL rule.
Range: 0-4294967295

In the create operation, if the value is 4294967295, the ID of a basic ACL rul…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.4.1.2
hwAclBasicAct
Describes the action of an ACL rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packets that meet the conditions are discarded
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2011.5.1.1.4.1.3
hwAclBasicSrcIp
Describes the source IP address or network segment of data frames that needs to match a basic ACL rule.
You can set or not set it. If you do not set it, any source IP address matches the basic ACL rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.4.1.4
hwAclBasicSrcWild
Describes the mask of the source IP address or network segment of data frames that needs to match a basic ACL rule.

To match the basic ACL rule with a subnet, use this parameter.
The value of this param…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.4.1.5
hwAclBasicTimeRangeIndex
Describes the time range index of a basic ACL rule.
It is used when the effective time of a basic ACL rule needs to be configured.
By default, the value is 0, which indicates invalid time.
The index depends on hwTrng…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.4.1.6
hwAclBasicFragments
Describes whether a basic ACL rule is effective on only non-tail fragment packets.
Options:
1. true(1) -indicates that a basic ACL rule is effective on only non-tail fragment packets
2. false(2) …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.4.1.7
hwAclBasicLog
Describes whether to record the log of a basic ACL rule.
Options:
1. true(1) -records the log of a basic ACL rule
2. false(2) -does not record the log of a basic ACL rule
Currently, the log record function is not suppo…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.4.1.8
hwAclBasicEnable
Describes whether a basic ACL rule is valid.
Options:
1. true(1) -a basic ACL rule is valid
2. false(2) -a basic ACL rule is invalid
If the basic ACL rule is associated with a time range parameter through hwAclBasicTi…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.4.1.9
hwAclBasicCount
Describes the statistics of packets that match the basic ACL rule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.1.1.4.1.10
hwAclBasicCountClear
Clears the statistics of packets that match the basic ACL rule.
Options:
1. cleared(1) -clear the statistics of packets that match the basic ACL rules
2. nouse(2) -indicates no operation
To clear the statistics of pac…
Enumerationr/w
Enumerated Values:
1cleared
2nouse
 .1.3.6.1.4.1.2011.5.1.1.4.1.11
hwAclBasicRowStatus
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create a basic ACL rule
3. destroy(6) -delete a basic ACL rule and clear the packe…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.4.1.12
hwAclBasicPriority
Describes the priority of a basic ACL rule.
Range: 0-9
Default: 0

The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the highest priority prevails.
…
Integer32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.2011.5.1.1.4.1.13

hwAclAdvancedRuleTable

table
.1.3.6.1.4.1.2011.5.1.1.5 · 1 row entry · 28 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclAdvancedRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclAdvancedRuleTable' 
Describes the details about an advanced ACL rule in an advanced ACL rule group.
          
The indexes of this table are hwAclAdvancedAclNum and hwAclAdvancedSubitem. 
hwAclAdvancedAclNum is the ID of an advanced ACL rule group. Make sure that the ID is already created in hwAclNumGroupTable. 
hwAclAdvancedSubitem is the ID of an advanced ACL rule in the advance ACL rule group.
hwAclAdvancedRuleEntry row .1.3.6.1.4.1.2011.5.1.1.5.1
Describes the details about an advanced ACL rule in an advanced ACL rule group.

The indexes of this entry are hwAclAdvancedAclNum and hwAclAdvancedSubitem.
hwAclAdvancedAclNum is the ID of an advanced ACL …
Indexes
Column Syntax OID
hwAclAdvancedAclNum
Uniquely identifies an advanced ACL rule group.
Range: 3000-3999
Make sure that the ID of the ACL rule group is already created in hwAclNumGroupTable.
Integer32
Constraints:
range: 3000-3999
 .1.3.6.1.4.1.2011.5.1.1.5.1.1
hwAclAdvancedSubitem
Describes the ID of an advanced ACL rule in an advanced ACL rule group, uniquely identifying an advanced ACL rule.
Range: 0-4294967295

In the create operation, if the value is 4294967295, the ID of an ad…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.5.1.2
hwAclAdvancedAct
Describes the action of an advanced ACL rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass
2. deny(2) -indicates that the data packets that meet the conditions are discarded
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2011.5.1.1.5.1.3
hwAclAdvancedProtocol
Describes the protocol of IP packets that matches an advanced ACL rule.
Range: 0-255
Default: 0

If the value is not specified for an advanced ACL rule, the invalid value 0 is obtained in the query operati…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.1.1.5.1.4
hwAclAdvancedSrcIp
Describes the source IP address or network segment of data frames that needs to match an advanced ACL rule.
You can set or not set it. If you do not set it, any source IP address matches the basic ACL rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.5.1.5
hwAclAdvancedSrcWild
Describes the mask of the source IP address or network segment of data frames that needs to match an advanced ACL rule.

To match an advanced ACL rule with a subnet, use this parameter.
The value of this…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.5.1.6
hwAclAdvancedSrcOp
Describes the operation types of comparing packet source ports when the type of hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-5
Options:
1. invalid(0) -indicates an invalid field.
2. lt(1) -indicates '<'
3.…
Enumerationr/w
Enumerated Values:
0invalid
1lt
2eq
3gt
4neq
5range
 .1.3.6.1.4.1.2011.5.1.1.5.1.7
hwAclAdvancedSrcPort1
Describes the operation value of port 1 in the comparison operation types of the source port in hwAclAdvancedSrcOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-65535, 65536

For ex…
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.5.1.1.5.1.8
hwAclAdvancedSrcPort2
Describes the operation value of port 2 in the comparison operation types of the source port in hwAclAdvancedSrcOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-65535, 65536

The operation va…
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.5.1.1.5.1.9
hwAclAdvancedDestIp
Describes the destination IP address or network segment of data frames that an advanced ACL rule needs to match.
You can set or not set it. If you do not set it, any destination IP address matches the advanced ACL rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.5.1.10
hwAclAdvancedDestWild
Describes the mask of the destination IP address or network segment of data frames that an advanced ACL rule needs to match.

To match an advanced ACL rule with a subnet, use this parameter.
The value of…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.1.1.5.1.11
hwAclAdvancedDestOp
Describes the operation type of comparing protocol destination ports when hwAclAdvancedProtocol is set to TCP or UDP.
Ranges: 0-5
Options:
1. invalid(0) -indicates an invalid field
2. lt(1) -indicates '<'
3. eq(2)…
Enumerationr/w
Enumerated Values:
0invalid
1lt
2eq
3gt
4neq
5range
 .1.3.6.1.4.1.2011.5.1.1.5.1.12
hwAclAdvancedDestPort1
Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclAdvancedDestOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-65535, 65536

For exampl…
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.5.1.1.5.1.13
hwAclAdvancedDestPort2
Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclAdvancedDestOp
when hwAclAdvancedProtocol is set to TCP or UDP.
Range: 0-65535, 65536

The operat…
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.5.1.1.5.1.14
hwAclAdvancedPrecedence
Describes the priority field of data frames that an advanced ACL rule needs to match.
If the value is not specified for an advanced ACL rule, the invalid value 255 is obtained in the query operation.

Th…
Enumerationr/w
Enumerated Values:
0routine
1priority
2immediate
3flash
4flashOverride
5critical
6internet
7network
255invalid
 .1.3.6.1.4.1.2011.5.1.1.5.1.15
hwAclAdvancedTos
Describes the type of service (ToS) field of data frames that an advanced ACL rule needs to match.
Range: 0-15, 255

If the value is not specified for an advanced ACL rule, the invalid value 255 is obtain…
Integer32r/w
Constraints:
range: 0-15
range: 255-255
 .1.3.6.1.4.1.2011.5.1.1.5.1.16
hwAclAdvancedDscp
Describes the differentiated services code point (DSCP) value of data frames that an advanced ACL rule needs to match.
Range: 0-63, 255

If the value is not specified for an advanced ACL rule, the invali…
Integer32r/w
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.2011.5.1.1.5.1.17
hwAclAdvancedEstablish
Describes whether to match the first SYN packet for TCP connection establishment when hwAclAdvancedProtocol is set to TCP.
When filter the packets for TCP connection establishment, use this parameter.
Options:
1. true(…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.5.1.18
hwAclAdvancedTimeRangeIndex
Describes the time range index of an advanced ACL rule.
It is used when the effective time of an advanced ACL rule needs to be configured.

By default, the value is 0, which indicates invalid time. The i…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.5.1.19
hwAclAdvancedIcmpType
Describes the ICMP type when packets are filtered by ICMP type and when hwAclAdvancedProtocol is set to ICMP.
Range: 0-255, 256

If the value is not specified for an advanced ACL rule, the invalid value 25…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.5.1.20
hwAclAdvancedIcmpCode
Describes ICMP codes that the ICMP packets are filtered both by ICMP type and ICMP code when hwAclAdvancedProtocol is set to ICMP.
Range: 0-255, 256
If the value is not specified for an advanced ACL rule, the invalid v…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.5.1.21
hwAclAdvancedFragments
Describes whether an advanced ACL rule is effective on only non-tail fragment packets.
Options:
1. true(1) -indicates that an advanced ACL rule is effective on only non-tail fragment packets
2. false(2) -indicates that…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.5.1.22
hwAclAdvancedLog
Describes whether to record the log flag byte of an advanced ACL rule.
Options:
1. true(1) -records the log flag byte of an advanced ACL rule
2. false(2) -does not recording the log flag byte of an advanced ACL rule
C…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.5.1.23
hwAclAdvancedEnable
Describes whether an advanced ACL rule is valid.
Options:
1. true(1) -indicates that an advanced ACL rule is valid
2. false(2) -indicates that an advanced ACL rule is invalid

If the advanced ACL rule is…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.5.1.24
hwAclAdvancedCount
Describes the statistics of packets that match the advanced ACL rule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.1.1.5.1.25
hwAclAdvancedCountClear
Clears the statistics of packets that match the advanced ACL rule.
Options:
1. cleared(1) -clear the statistics of packets that match the advanced ACL rule
2. nouse(2) -indicates no operation
To clear the statistics o…
Enumerationr/w
Enumerated Values:
1cleared
2nouse
 .1.3.6.1.4.1.2011.5.1.1.5.1.26
hwAclAdvancedRowStatus
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an advanced ACL rule
3. destroy(6) -delete an advanced ACL rule and clear t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.5.1.27
hwAclAdvancedPriority
Describes the priority of advanced ACL rules.
Range: 0-9
Default: 0

The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the highest priority prevails.
…
Integer32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.2011.5.1.1.5.1.28

hwAclLinkTable

table
.1.3.6.1.4.1.2011.5.1.1.7 · 1 row entry · 23 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclLinkTable' 
Describes the details about an L2 ACL rule in an L2 ACL rule group, including the MAC address and VLAN. 
          
The indexes of this table are hwAclLinkAclNum and hwAclLinkSubitem. 
hwAclLinkAclNum is the ID of an L2 ACL rule group. Make sure that the ID is already created in hwAclNumGroupTable. 
hwAclLinkSubitem is the ID of an L2 ACL rule in an L2 ACL rule group.
hwAclLinkEntry row .1.3.6.1.4.1.2011.5.1.1.7.1
Describes the details about an L2 ACL rule in an L2 ACL rule group, including the MAC address and VLAN.

The indexes of this entry are hwAclLinkAclNum and hwAclLinkSubitem.
hwAclLinkAclNum is the ID of an …
Indexes
Column Syntax OID
hwAclLinkAclNum
Uniquely identifies an L2 ACL rule group.
Range: 4000-4999
Make sure that the ID of the L2 ACL rule group is already created in hwAclNumGroupTable.
Integer32
Constraints:
range: 4000-4999
 .1.3.6.1.4.1.2011.5.1.1.7.1.1
hwAclLinkSubitem
Describes the ID of an L2 ACL rule, uniquely identifying an L2 ACL rule in an L2 ACL rule group.
Range: 0-4294967295

In the create operation, if the value is 4294967295, the ID of an L2 ACL rule is gener…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.7.1.2
hwAclLinkAct
Describes the value of an L2 ACL rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass.
When you need to configure an L2 ACL rule for data packets that meet
…
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2011.5.1.1.7.1.3
hwAclLinkProtocol
Describes the protocol types of Ethernet packets that the L2 ACL rules need to match.
Range:1-65536

If the value of an L2 ACL rule is not specified, the invalid value 65536 is obtained in the query operat…
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.2011.5.1.1.7.1.4
hwAclLinkFormatType
Describes the types of packets that the L2 ACL rules need to match.
Options:
1. invalid(0) -in the query operation, invalid(0) is always returned.
2. ethernetII(1) -indicates the type of packets that the L2…
Enumeration
Enumerated Values:
0invalid
1ethernetII
2snap
3ieee802Dot3And2
4ieee802Dot4
 .1.3.6.1.4.1.2011.5.1.1.7.1.5
hwAclLinkVlanTag
Describes whether a VLAN tag is carried in the packets that the L2 ACL rules need to match.
Options:
1. invalid(0) -in the query operation, invalid(0) is always returned.
2. tagged(1) -indicates the VLAN tag is carr…
Enumeration
Enumerated Values:
0invalid
1tagged
2untagged
 .1.3.6.1.4.1.2011.5.1.1.7.1.6
hwAclLinkVlanPri
Describes the 802.1p priority of data frames that an L2 ACL rule needs to match.
Options:
1. bestEffort(0) -indicates best-effort priority
2. background(1) -indicates background priority
3. spare(2) …
Enumerationr/w
Enumerated Values:
0bestEffort
1background
2spare
3excellentEffort
4controlledLoad
5video
6voice
7networkManagement
255invalid
 .1.3.6.1.4.1.2011.5.1.1.7.1.7
hwAclLinkSrcVlanId
Describes the VLAN ID of data frames that an L2 ACL rule needs to match.
Range: 0-4093
If the value of an L2 ACL rule is not specified, the invalid value 0 is obtained in the query operation.
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.2011.5.1.1.7.1.8
hwAclLinkSrcMac
Describes the source MAC address of data frames that an L2 ACL rule needs to match.
Default: 0x00 0x00 0x00 0x00 0x00 0x00
It is a 6-byte hexadecimal string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.1.1.7.1.9
hwAclLinkSrcMacWild
Describes the source MAC address wildcard of data frames that an L2 ACL rule needs to match. It is the inverse mask of the source MAC address.
Default: 0xff 0xff 0xff 0xff 0xff 0xff

It together with hwAc…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.1.1.7.1.10
hwAclLinkSrcIfIndex
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.7.1.11
hwAclLinkSrcAny
Describes whether an L2 ACL rule matches a source MAC address.
Options:
1. true(1) -indicates that the source MAC address of data frames can be any address
2. false(2) -indicates that the source MAC address of data f…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.7.1.12
hwAclLinkDestVlanId
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Integer32
Constraints:
range: 0-4093
 .1.3.6.1.4.1.2011.5.1.1.7.1.13
hwAclLinkDestMac
Describes the inner VLAN ID of the packets that an L2 ACL rule needs to match.
Default: 0x00 0x00 0x00 0x00 0x00 0x00
It is a 6-byte hexadecimal string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.1.1.7.1.14
hwAclLinkDestMacWild
Describes the destination MAC address wildcard of data frames that an L2 ACL rule needs to match.
It is the inverse mask of the destination MAC address.
Default: 0xff 0xff 0xff 0xff 0xff 0xff

It together…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.1.1.7.1.15
hwAclLinkDestIfIndex
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.7.1.16
hwAclLinkDestAny
Describes whether an L2 ACL rule matches a destination MAC address.
Options:
1. true(1) -indicates that the destination MAC address of data frames can be any address
2. false(2) -indicates that the destination MAC ad…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.7.1.17
hwAclLinkTimeRangeIndex
Describes the time range index of an L2 ACL rule. It is used when the effective time of an L2 ACL rule needs to be configured.

By default, the value is 0, which indicates an invalid index. The index depe…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.7.1.18
hwAclLinkEnable
Describes whether an L2 ACL rule is valid.
Options:
1. true(1) -indicates validity
2. false(2) -indicates invalidity

If the L2 ACL rule is associated with a time range parameter through hwAclLinkTi…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.7.1.19
hwAclLinkRowStatus
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create an L2 ACL rule
3. destroy(6) -delete an L2 ACL rule

It is …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.7.1.20
hwAclLinkPriority
Describes the priority of L2 ACL rules.
Range: 0-9
Default: 0

The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the highest priority prevails.
…
Integer32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.2011.5.1.1.7.1.21
hwAclLinkInnerVlanPri
Describes the 802.1p priority in the inner VLAN of the packet that an L2 ACL rules needs to match.
Range: 0-7, 255
The priority ascends with the value.
Options:
1. bestEffort(0) -indicates best-effort priority
2.…
Enumerationr/w
Enumerated Values:
0bestEffort
1background
2spare
3excellentEffort
4controlledLoad
5video
6voice
7networkManagement
255invalid
 .1.3.6.1.4.1.2011.5.1.1.7.1.22
hwAclLinkSrcInnerVlanId
The source inner VLAN ID of the packet.
Value range: 0-4093
0 indicates the hwAclLinkSrcVlanId is invalid.
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.2011.5.1.1.7.1.23

hwAclUserTable

table
.1.3.6.1.4.1.2011.5.1.1.8 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclUserTable' 
Describes the details about a user-defined ACL rule in a user-defined ACL rule group, 
including the matched character string and mask. The two fields are a binary character string of 80 bytes each. 
          
The index of this table is a combination of hwAclUserAclNum and hwAclUserSubitem. 
hwAclUserAclNum is the ID of a user-defined ACL rule group. Make sure that the ID is already created in hwAclNumGroupTable. 
hwAclUserSubitem is the ID of a user-defined ACL rule.
hwAclUserEntry row .1.3.6.1.4.1.2011.5.1.1.8.1
Describes the details about a user-defined ACL rule in a user-defined ACL rule group,
including the matched character string and mask. The two fields are a binary character string of 80 bytes each.

The in…
Indexes
Column Syntax OID
hwAclUserAclNum
Uniquely identifies a user-defined ACL rule group.
Range: 5000-5999
Make sure that the ID of a user-defined ACL rule group is already created in hwAclNumGroupTable.
Integer32
Constraints:
range: 5000-5999
 .1.3.6.1.4.1.2011.5.1.1.8.1.1
hwAclUserSubitem
Describes the ID of a user-defined ACL rule, uniquely identifying a user-defined ACL rule in a user-defined ACL rule group.
Range: 0-4294967295

In the create operation, if the value is 4294967295, the ID…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.8.1.2
hwAclUserAct
Describes the value of a user-defined ACL rule.
Options:
1. permit(1) -indicates that the data packets that meet the conditions can pass.
When you need to configure a user-defined ACL rule…
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2011.5.1.1.8.1.3
hwAclUserFormatType
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Options:
1. invalid(0) -invalid value
2. ethernetII(1) -ethernetII
3. snap(2) -smart not…
Enumeration
Enumerated Values:
0invalid
1ethernetII
2snap
3ieee802Dot2And3
4ieee802Dot4
 .1.3.6.1.4.1.2011.5.1.1.8.1.4
hwAclUserVlanTag
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Options:
1. invalid(0) -invalid value
2. tagged(1) -tagged packet
3. untagged(2) -untagged packet
Enumeration
Enumerated Values:
0invalid
1tagged
2untagged
 .1.3.6.1.4.1.2011.5.1.1.8.1.5
hwAclUserRuleStr
Describes the character string of a user-defined ACL rule. It is used to match the first bytes of packets.
The character string must be hexadecimal and bytes.
For example:
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 …
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.1.1.8.1.6
hwAclUserRuleMask
Describes the mask of the user-defined ACL rule. It is a positive mask.

When it is 1, it indicates that matching is required.
The device determines the field value of a packet that needs to match based …
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.1.1.8.1.7
hwAclUserRowOffset
This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity.
Integer32
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.5.1.1.8.1.8
hwAclUserTimeRangeIndex
Describes the time range index of a user-defined ACL rule.
It is used when the effective time of a user-defined ACL rule needs to be configured.

By default, the value is 0, which indicates invalid time.…
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.1.1.8.1.9
hwAclUserEnable
Describes whether a user-defined ACL rule is valid.
Options:
1. true(1) -indicates the user-defined ACL rule is valid
2. false(2) -indicates the user-defined ACL rule is invalid

If the user-defined…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.8.1.10
hwAclUserRowStatus
Indicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create a user-defined ACL rule
3. destroy(6) -delete a user-defined ACL rule
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.8.1.11
hwAclUserFrameType
Describes the type of a VLAN tag in the packet that matches the user-defined ACL rule.
Options:
1. ipoe(0) -indicates that IP packets carrying no VLAN tags and
IP packets that carrying one VLAN tag a…
Enumerationr/w
Enumerated Values:
0ipoe
1nonIpoe
2ipv6oe
 .1.3.6.1.4.1.2011.5.1.1.8.1.12
hwAclUserPriority
Describes the priority of user-defined ACL rules.
Range: 0-9
Default: 0

The priority ascends with the value.
When multiple rules are matched at the same time, the rule with the highest priority prevails.…
Integer32r/w
Constraints:
range: 0-9
 .1.3.6.1.4.1.2011.5.1.1.8.1.13

hwAclActiveTable

table
.1.3.6.1.4.1.2011.5.1.1.9 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAclActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DSLAM-ACL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DSLAM-ACL-MIB::hwAclActiveTable' 
Describes the relationships between an ACL rule and a port or a slot. 
You can deliver an ACL rule to a port or a slot and make it take effect on the port or a slot through hwAclActiveTable. 
In addition, You can query the relationships between an ACL rule and a port or a slot. 
          
The indexes of this table are hwAclActiveAclIndex, hwAclActiveIfIndex, and hwAclActiveDirection, 
indicating the ACL index, the port index or the slot index, and direction respectively. 
          
Make sure that an ACL rule to be delivered through hwAclActiveTable is already created in hwAclBasicRuleTable, 
hwAclAdvancedRuleTable, hwAclLinkTable or hwAclUserTable.
hwAclActiveEntry row .1.3.6.1.4.1.2011.5.1.1.9.1
Describes the relationships between an ACL rule and a port or a slot.
You can deliver an ACL rule to a port or a slot and make it take effect on the port or a slot through hwAclActiveTable.
In addition, You can query …
Indexes
Column Syntax OID
hwAclActiveAclIndex
The delivery entry index of an ACL rule is a delivery record entry index used by software, which is meaningless to users.
The index of is used in hwAclActiveTable to search the delivery entries fast.
In the create ope…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.1.1.9.1.1
hwAclActiveIfIndex
Indicates the port index or the slot index when the device delivers an ACL rule to a specified port or a specified slot.
The index uniquely identifies a port or a slot. The value and algorithm are the same as those of …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.1.1.9.1.2
hwAclActiveDirection
Indicates the direction where an ACL rule takes effect when the device delivers an ACL rule to a specified port or a specified slot.
Options:
1. invalid(0) -indicates an invalid parameter
2. inbound(1) -ind…
Enumeration
Enumerated Values:
0invalid
1inbound
2outbound
3tocpu-inbound
 .1.3.6.1.4.1.2011.5.1.1.9.1.3
hwAclActiveUserAclNum
Describes the user-defined ACL rule group that are used when a user-defined ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the user-defined ACL ru…
Integer32r/w
Constraints:
range: 0-0
range: 5000-5999
 .1.3.6.1.4.1.2011.5.1.1.9.1.4
hwAclActiveUserAclSubitem
Describes the user-defined ACL rule that is used when a user-defined ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the user-defined ACL rule.
Th…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.9.1.5
hwAclActiveIpAclNum
Describes the basic or advanced ACL rule group that are used when an ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the ACL rule.
Range: 0, 2000-3…
Integer32r/w
Constraints:
range: 0-0
range: 2000-3999
 .1.3.6.1.4.1.2011.5.1.1.9.1.6
hwAclActiveIpAclSubitem
Describes the basic or advanced ACL rule that is used when an ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the ACL rule. This leaf must be used …
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.9.1.7
hwAclActiveLinkAclNum
Describes the L2 ACL rule group that are used when an L2 ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the L2 ACL rule.
Range: 0, 4000-4999
…
Integer32r/w
Constraints:
range: 0-0
range: 4000-4999
 .1.3.6.1.4.1.2011.5.1.1.9.1.8
hwAclActiveLinkAclSubitem
Describes the L2 ACL rule that is used when an L2 ACL rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the L2 ACL rule.
This leaf must be used together…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.9.1.9
hwAclActiveRuntime
Describes whether the ACL rule delivered to a specified port or a specified slot takes effect.
Options:
1. true(1) -indicates that the ACL rule delivered to a specified port or a specified slot is effective
2. fa…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.1.1.9.1.10
hwAclActiveRowStatus
Indicates the row status. It is used for delivering an ACL rule to a specified port or a specified slot and deleting the delivered ACL rule in a port or a slot.
Options:
1. active(1) -when this leaf is queried, th…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.1.1.9.1.11
hwAclActiveIpv6AclNum
Describes the basic or advanced ACLv6 rule group that are used when an ACLv6 rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the ACLv6 rule.
Range: 0, …
Integer32r/w
Constraints:
range: 0-0
range: 2000-3999
 .1.3.6.1.4.1.2011.5.1.1.9.1.12
hwAclActiveIpv6AclSubitem
Describes the basic or advanced ACLv6 rule that is used when an ACLv6 rule is delivered to a specified port or a specified slot
and the inbound or outbound packets are filtered based on the ACLv6 rule. This leaf must be…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.1.1.9.1.13