HUAWEI-CESOP-TDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
112
.1.3.6.1.4.1.2011.5.108.1.1 · 1 row entry · 6 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopPortCfgTable'
This table is used for setting CESoP port configuration.
The index of this table is ifIndex.
hwCesopPortCfgEntry row .1.3.6.1.4.1.2011.5.108.1.1.1
This table is used for setting CESoP port configuration.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
Line coding mode of CESoP port.
Options:
1. e1HDB3(1) -the line coding mode of CESoP port is e1HDB3
2. e1AMI(2) -the line coding mode of CESoP port is e1AMI
3. t1B8SZ(3) -the line coding mode of CESoP port is t1B8SZ
Enumerationr/w
Enumerated Values:
1e1HDB3
2e1AMI
3t1B8SZ
.1.3.6.1.4.1.2011.5.108.1.1.1.1
Loopback mode of CESoP port.
Options:
1. e1NoLoop(1) -the loopback mode of CESoP port is e1NoLoop
2. e1LocalLoop(2) -the loopback mode of CESoP port is e1LocalLoop
3. e1RemoteLoop(3) -the loopback mode of …
Enumerationr/w
Enumerated Values:
1e1NoLoop
2e1LocalLoop
3e1RemoteLoop
7e1PayloadLoop
.1.3.6.1.4.1.2011.5.108.1.1.1.2
Clock source mode of CESoP port.
Options:
1. syetem(1) -system clock
2. line(2) -line clock
3. net(5) -net clock
4. net1(6) -net clock 1
5. net2(7) -net clock 2
6. net3(8) -net clock 3…
Enumerationr/w
Enumerated Values:
-1invalid
1syetem
2line
5net
6net1
7net2
8net3
.1.3.6.1.4.1.2011.5.108.1.1.1.3
Line status of CESoP port.
Options:
1. dsx1Normal(1) -the line alarm status of CESoP port is normal
2. dsx1Fault(2) -the line alarm status of CESoP port is fault
Enumeration
Enumerated Values:
1dsx1Normal
2dsx1Fault
.1.3.6.1.4.1.2011.5.108.1.1.1.4
Status of RTP switch.
Options:
1. enable(1) -status of RTP switch to enable
2. disable(2) -status of RTP switch to disable
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
.1.3.6.1.4.1.2011.5.108.1.1.1.5
Frame mode of CESoP port.
Options:
1. t1SF(1) -the frame mode of CESoP port is SF
2. t1ESF(2) -the frame mode of CESoP port is ESF
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1t1SF
2t1ESF
.1.3.6.1.4.1.2011.5.108.1.1.1.6
.1.3.6.1.4.1.2011.5.108.1.2 · 1 row entry · 3 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopPortPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopPortPerfTable'
The performance statistics of the CESoP port.
The index of this table is ifIndex.
hwCesopPortPerfEntry row .1.3.6.1.4.1.2011.5.108.1.2.1
The performance statistics of the CESoP port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
The number of error seconds.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2011.5.108.1.2.1.1
The number of serious error seconds.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2011.5.108.1.2.1.2
The number of unavailable seconds.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2011.5.108.1.2.1.3
.1.3.6.1.4.1.2011.5.108.1.3 · 1 row entry · 7 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopBoardCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopBoardCfgTable'
This table is used for setting CESoP board configuration.
The indexes of this table are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex.
hwCesopBoardCfgEntry row .1.3.6.1.4.1.2011.5.108.1.3.1
This table is used for setting CESoP board configuration.
The indexes of this entry are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex.
Column Syntax OID
Frame ID of the CESoP board.
Only the value 0 is supported.
Integer32
Constraints:
range: 0-0
.1.3.6.1.4.1.2011.5.108.1.3.1.1
Slot ID of the CESoP board.
Integer32
Constraints:
range: 0-22
.1.3.6.1.4.1.2011.5.108.1.3.1.2
ZL chip ID of the CESoP board.
Only the value 0 is supported.
Integer32
Constraints:
range: 0-0
.1.3.6.1.4.1.2011.5.108.1.3.1.3
Ip address of the CESoP board.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.108.1.3.1.4
Mac address of the CESoP board.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.108.1.3.1.5
The present operation status of the row.
Options:
1. active(1) -the status of the row is active
2. notInService(2) -the status of the row is notInService
3. notReady(3) -the status of the row is notRe…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.108.1.3.1.6
Recovery clock source of the CESoP board.
Integer32r/w
Constraints:
range: 0-125
.1.3.6.1.4.1.2011.5.108.1.3.1.7
.1.3.6.1.4.1.2011.5.108.1.4 · 1 row entry · 24 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopConnectCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopConnectCfgTable'
This table is used for setting CESoP link configuration.
The index of this table is hwCesopConnectIndex.
hwCesopConnectCfgEntry row .1.3.6.1.4.1.2011.5.108.1.4.1
This table is used for setting CESoP link configuration.
The index of this entry is hwCesopConnectIndex.
Column Syntax OID
CESoP link connection id.
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.2011.5.108.1.4.1.1
The index of CESoP interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.108.1.4.1.2
The remote MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.108.1.4.1.3
The remote CESoP port IP.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.108.1.4.1.4
The remote UDP label.
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.2011.5.108.1.4.1.5
The local UDP label.
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.2011.5.108.1.4.1.6
The VlanID.
Integer32r/w
Constraints:
range: 1-4093
.1.3.6.1.4.1.2011.5.108.1.4.1.7
The present operation status of the row.
Options:
1. active(1) -the status of the row is active
2. notInService(2) -the status of the row is notInService
3. notReady(3) -the status of the row is no…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.108.1.4.1.8
The RTP switch of CESoP link.
Options:
1. disable(1) -the RTP switch of CESoP link is disable
2. enable(2) -the RTP switch of CESoP link is enable
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.2011.5.108.1.4.1.9
The jitterBuffer size of CESoP link.
Integer32r/w
Constraints:
range: 500-32000
.1.3.6.1.4.1.2011.5.108.1.4.1.10
The length of CESoP packets payload.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ... |
| IPv4/IPv6 and UDP headers …
Integer32r/w
Constraints:
range: 32-768
.1.3.6.1.4.1.2011.5.108.1.4.1.11
The TDM LoadTime of CESoP link, it must be a multiple of 125. If the entered value is not a multiple of 125,
the system rounds it down to the nearest multiple of 125. The value of this field must be equal to or lower
th…
Integer32r/w
Constraints:
range: 125-5000
.1.3.6.1.4.1.2011.5.108.1.4.1.12
The Priority of CESoP link
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.2011.5.108.1.4.1.13
TDM-VCL ID
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.2011.5.108.1.4.1.14
The LSP label of received packet.
Integer32r/w
Constraints:
range: 8192-8447
range: -1--1
.1.3.6.1.4.1.2011.5.108.1.4.1.15
The PW label of received packet.
Integer32r/w
Constraints:
range: 8448-8703
range: -1--1
.1.3.6.1.4.1.2011.5.108.1.4.1.16
The LSP label of transmitted packet.
Integer32r/w
Constraints:
range: 16-1048575
range: -1--1
.1.3.6.1.4.1.2011.5.108.1.4.1.17
The PW label of transmitted packet.
Integer32r/w
Constraints:
range: 16-1048575
range: -1--1
.1.3.6.1.4.1.2011.5.108.1.4.1.18
The gateway IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.108.1.4.1.19
The recieve SSRC ID in RTP header.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.108.1.4.1.20
The transmit SSRC ID in RTP header.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.108.1.4.1.21
The payload type in RTP header.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.108.1.4.1.22
The sn start number in RTP header.
Integer32r/w
Constraints:
range: 0-1
.1.3.6.1.4.1.2011.5.108.1.4.1.23
The remote MAC address resolving status.
Options:
1. static(1) -the remote MAC address is configured by user.
2. resolving(2) -the remote MAC address has not beed resolved.
3. resolved(3) -the remote MAC address has…
Enumeration
Enumerated Values:
1static
2resolving
3resolved
4aged
.1.3.6.1.4.1.2011.5.108.1.4.1.24
.1.3.6.1.4.1.2011.5.108.1.5 · 1 row entry · 43 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopGlobalPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopGlobalPerfTable'
The table of CESoP global performance statistics.
The indexes of this table are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex.
hwCesopGlobalPerfEntry row .1.3.6.1.4.1.2011.5.108.1.5.1
The table of CESoP global performance statistics.
The indexes of this entry are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex.
Column Syntax OID
Frame ID of the statistics CESoP board.
Only the value 0 is supported.
Integer32
Constraints:
range: 0-0
.1.3.6.1.4.1.2011.5.108.1.5.1.1
Slot ID of the statistics CESoP board.
Integer32
Constraints:
range: 0-22
.1.3.6.1.4.1.2011.5.108.1.5.1.2
The high byte of the match protocol packets counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.3
The low byte of the match protocol packets counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.4
The number of mismatch protocol packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.5
The number of mismatch classify rules packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.6
The number of verification failure packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.7
The number of IP check sum failure packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.8
The number of UDP check sum failure packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.9
The number of dropped events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.10
The number of received bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.11
The number of received frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.12
The number of received broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.13
The number of received multicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.14
The number of received CRC errors packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.15
The number of received undersized frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.16
The number of received oversized frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.17
The number of received fragments.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.18
The number of received jabber frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.19
The number of received conflict frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.20
The number of received 64-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.21
The number of received 65~127-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.22
The number of received 128~255-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.23
The number of received 256~511-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.24
The number of received 512~1023-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.25
The number of received 1024~1518-byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.26
The number of received bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.27
The number of received unicast packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.28
The number of received multicast and broadcast packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.29
The number of received discarded packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.30
The number of received errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.31
The number of received unknown protocol packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.32
The number of transmitted bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.33
The number of transmitted unicast packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.34
The number of transmitted multicast and broadcast packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.35
The number of transmitted discarded packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.36
The number of transmitted errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.37
The length of transmitted packets queues.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.5.1.38
The number of destination MAC error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.39
The number of destination IP error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.40
The number of destination UDP port error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.41
The number of transmitted packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.108.1.5.1.42
Clear statistics information of the CESoP board.
Options:
1. clear(1) -clear statistics information of the CESoP board
Enumerationr/w
Enumerated Values:
1clear
.1.3.6.1.4.1.2011.5.108.1.5.1.43
.1.3.6.1.4.1.2011.5.108.1.6 · 1 row entry · 29 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesopConnectPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CESOP-TDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CESOP-TDM-MIB::hwCesopConnectPerfTable'
The table of CESoP connection performance statistics.
The index of this table is hwCesopPerfConnectPwID.
hwCesopConnectPerfEntry row .1.3.6.1.4.1.2011.5.108.1.6.1
The table of CESoP connection performance statistics.
The index of this entry is hwCesopPerfConnectPwID.
Column Syntax OID
The CESoP link ID of performance statistics.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.2011.5.108.1.6.1.1
Early packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.2
Late packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.3
Underrun packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.4
Lost packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.5
Current queue length of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.6
Average queue length of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.7
Maximum queue length of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.8
Minimum queue length of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.9
Received packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.10
Transmitted packets number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.11
Transmitted bytes number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.12
L bit status changed number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.13
L bit set number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.14
R bit status changed number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.15
L bit set number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.16
JitterBuffer overflow number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.17
JitterBuffer overflow reset number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.18
JitterBuffer underflow number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.19
JitterBuffer underflow reset number of the CESoP link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.20
Clear statistics information of the CESoP link.
Options:
1. clear(1) -clear statistics information of the CESoP link
2. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1clear
.1.3.6.1.4.1.2011.5.108.1.6.1.21
Statistics of the packets received on an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.22
Statistics of the packets transmitted from an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.23
Statistics of the SN-error packets received on an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.24
Statistics of the VLAN ID-error packets received on an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.25
Statistics of the packets that are dropped due to queue overflow of an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.26
Statistics of the packets that are dropped due to queue underflow of an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.27
Statistics of the error packets received on an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.28
Statistics of the SSRC-error packets received on an E1 channel.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.108.1.6.1.29