HUAWEI-CBQOS-MIB Table View

This table describes the traffic classification configuration table. Classes are classified into system-defined classes and user-defined classes. System-defined classes cannot be created, modified, or deleted.

hwCBQoSClassifierCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1

hwCBQoSClassifierCfgInfoEntry .

Indexes

hwCBQoSClassifierIndex

Column	Syntax	OID
hwCBQoSClassifierIndex This object indicates the traffic classification index. The value ranges from 0 to 65535.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.1
hwCBQoSClassifierName This object indicates the name of the traffic classifier. The value of this object is a string of 1 to 127 visible ASCII characters. This object has no default value. No space can exist between characters in the string.…	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.2
hwCBQoSClassifierRuleCount The value of this object identifies the number of the matching rules for the traffic classifier. The value ranges from 0 to 16. This object has no default value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.3
hwCBQoSClassifierOperator The value of this object identifies the relationship between matching rules. The value of this object can be AND(1) or OR(2). The default value is OR(2).	Enumerationr/w Enumerated Values: 1 and 2 or	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.4
hwCBQoSClassifierLayer Configuration layer of traffic classifier. Only hardware QoS support it. -1(unavailable) is returned only when getting value from software QoS. -1(unavailable) can't be set.	Enumerationr/w Enumerated Values: -1 unavailable 1 l2 2 l3 3 both	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.5
hwCBQoSClassifierRowStatus This object indicates the row status. The value can be one of the following: Active (1), CreateAndGo (4), and Destroy (6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.1.2.1.6

A table of Match Rule configuration information.

hwCBQoSMatchRuleCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1

Match Rule Configuration Information Entry.

Indexes

hwCBQoSClassifierIndex hwCBQoSMatchRuleIndex hwCBQoSMatchVlanBeginId

Column	Syntax	OID
hwCBQoSMatchRuleIndex The value of this object identifies the rule index. The value ranges from 0 to 15. This object has no default value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.1
hwCBQoSMatchRuleIfNot The value of this object identifies the if-match rule is a Match or NotMatch statement. The value of this object can be match(1) or match-not(2).	Enumerationr/w Enumerated Values: 1 match 2 notMatch	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.2
hwCBQoSMatchRuleType The value of this object identifies the rule type. The value of this object can be any of the following: any(1) ipv4-acl(2) rtp-port(3) protocol(4) ip-prec(5) dscp(6) vlan-8021p(7) mpls-exp(8) source-mac(9) destination…	MatchRuleTyper/w Type Values: 1 typeAny 2 typeAcl 3 typeRtpPort 4 typeProtocol 5 typeIpPrec 6 typeDscp 7 typeVlan8021p 8 typeMplsExp 9 typeSourceMac 10 typeDestinationMac 11 typeClassifier 12 typeInboundInterface 13 typeMacGroup 16 typeMatchDe 17 typeMatchClp 25 typeOutboundInterface	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.3
hwCBQoSMatchRuleStringValue This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported types are Source-MAC(9) and Destination-MAC(10), the value of this object …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.4
hwCBQoSMatchRuleIntValue1 This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. Wh…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5
hwCBQoSMatchRuleIntValue2 This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSC…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.6
hwCBQoSMatchRuleRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.7
hwCBQoSMatchMacMask Value of Match Rule. Source-MAC(9): SIZE (0..6) HHHHHH for example: ffff00 means the match rule is 'if-match source-mac XX-XX-XX ff-ff-00' Destination-MAC(10): SIZE (0..6) HHHHHH for example: ffff00 means the match rul…	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.8
hwCBQoSMatchVlanBeginId Start vlan ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.9
hwCBQoSMatchVlanEndId End vlan ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.10
hwCBQoSMatchInnerSrcIp Inner source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.11
hwCBQoSMatchInnerSrcIpMask Mask length of inner source IP address, ranges from 0 to 32.	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.12
hwCBQoSMatchInnerDstIp Inner destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.13
hwCBQoSMatchInnerDstIpMask Mask length of inner destination IP address, ranges from 0 to 32.	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.14
hwCBQoSMatchInnerSrcPort Inner source port, ranges from 0 to 65535. The invalid value is 65536.	Unsigned32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.15
hwCBQoSMatchInnerDstPort Inner destination port, ranges from 0 to 65535. The invalid value is 65536.	Unsigned32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.16
hwCBQoSMatchInnerProtocol Inner IP protocol, ranges from 0 to 255. The invalid value is 65536.	Unsigned32r/w Constraints: range: 0-255 range: 65536-65536	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.17
hwCBQoSMatchVxlanVni Vxlan VNI, ranges from 1 to 16777215. The invalid value is 0.	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.18

This table is used to configure the traffic behavior, to be specific, specify the action for the traffic that matches a traffic classification rule.

hwCBQoSBehaviorCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.2.1

Traffic Behavior Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSBehaviorIndex This object indicates the traffic behavior index. The value ranges from 0 to 65535. There is no default value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.2.1.1
hwCBQoSBehaviorName This object indicates the name of a traffic classifier. The value is a string of 1-127 ASCII characters that can be displayed. Default value: Note: The character string cannot contain spaces. Spaces at the beginning or …	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.2.2.1.2
hwCBQoSBehaviorRowStatus This object indicates the row status of a traffic behavior. The value can be Active (1), CreateAndGo (4), or Destroy (6). There is no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.2.1.3

This table is used to configure traffic policing. The traffic rate is limited according to the configuration in this table to protect different customers' rights and provide fair and reliable services.

hwCBQoSCarCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1

CAR Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSCarCir This object indicates the CIR. The value is an integer ranging from 0 to 4294967295, in kbit/s. There is no default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.1
hwCBQoSCarCbs This object indicates the CBS value. The value ranges from 0 to 4294967295. There is no default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.2
hwCBQoSCarEbs Excess Burst Size. Unit: byte. 0..19375000 Only software QoS support this node. -1 is returned only when getting value from hardware QoS. -1 can't be set.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.3
hwCBQoSCarPir This object indicates the PIR. The value is an integer ranging from 0 to 4294967295, in kbit/s. There is no default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.4
hwCBQoSCarPbs This object indicates the PBS. The value is an integer ranging from 0 to 4294967295, in bytes. There is no default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.5
hwCBQoSCarGreenAction This object indicates the action taken when the CIR is not reached. The value can be one of the following: Pass (1), discard (2), remark IP Precedence (3), remark DSCP (4), remark Mpls Exp (5), remark (6), and remark 80…	CarActionr/w Type Values: 1 pass 2 discard 3 remarkIpPrec 4 remarkDscp 5 remarkMplsExp 6 remark	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.6
hwCBQoSCarGreenRemarkValue This object indicates the re-marked internal priority of packets when the CIR is not reached. The value ranges from 0 to 83. When service-class is specified for CAR,the high bit represents service-class,the range is 1~8…	Integer32r/w Constraints: range: -1-83	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.7
hwCBQoSCarYellowAction This object indicates the re-marked internal priority of packets when the CIR is not reached. The value ranges from 0 to 83.	CarActionr/w Type Values: 1 pass 2 discard 3 remarkIpPrec 4 remarkDscp 5 remarkMplsExp 6 remark	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.8
hwCBQoSCarYellowRemarkValue This object indicates the re-marked internal priority of packets when the CIR is exceeded but the PIR is not exceeded. The value ranges from 0 to 83. When service-class is specified for CAR,the high bit represents servi…	Integer32r/w Constraints: range: -1-83	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.9
hwCBQoSCarRedAction This object indicates the traffic behavior when the rate exceeds the PIR.	CarActionr/w Type Values: 1 pass 2 discard 3 remarkIpPrec 4 remarkDscp 5 remarkMplsExp 6 remark	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.10
hwCBQoSCarRedRemarkValue The value is to remark When red action is remarking. For remarking DSCP, the range is 0~83; the high bit represents service-class,the range is 1~8 (1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7) the low bit represents …	Integer32r/w Constraints: range: -1-83	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.11
hwCBQoSCarRowStatus This object indicates the row status of the flow CAR. The value can be one of the following: active, createAndGo, and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.12
hwCBQosCarAggregation aggregationCar(1): aggregation car; noneAggregationCar(2) : none aggregation car.	Enumerationr/w Enumerated Values: 1 aggregationCar 2 noneAggregationCar	.1.3.6.1.4.1.2011.5.25.32.1.1.2.3.1.13

A table of GTS feature configuration information.

hwCBQoSGtsCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1

GTS Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSGtsCir Committed Information Rate. Unit: kbytes	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.1
hwCBQoSGtsCbs Committed Burst Size. Unit: bit default: max(cir*1/2,15000)	Integer32r/w Constraints: range: 15000-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.2
hwCBQoSGtsEbs Excess Burst Size. Unit: bit	Integer32r/w Constraints: range: 0-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.3
hwCBQoSGtsQueueLength The length of GTS buffer.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.4
hwCBQoSGtsRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.5
hwCBQoSGtsPir Peak information rate.	Integer32r/w Constraints: range: 0-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.4.1.6

This table is used to configure flow-based re-marking. With traffic classification, different priorities are marked for different flows to provide differentiated services.

hwCBQoSRemarkCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.5.1

Remarking Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex hwCBQoSRemarkType

Column	Syntax	OID
hwCBQoSRemarkType The value of this object identifies the re-mark type. The value can be any of the following: IP-Prec(1) DSCP(2) MPLS-EXP(3) VLAN-8021p(4) ATM-CLP(5) FR-DE(6) QoS-Local-ID(7) IPV6-DSCP(8) Local-Prec(9) destination-mac(10…	RemarkType Type Values: 1 typeIpPrec 2 typeDscp 3 typeMplsExp 4 typeVlan8021p 5 typeAtmClp 6 typeFrDe	.1.3.6.1.4.1.2011.5.25.32.1.1.2.5.1.1
hwCBQoSRemarkValue This object indicates the re-mark value. When hwCBQoSRemarkType is set to ip-prec (1), mpls-exp (3), or vlan-8021p (4), the value ranges from 0 to 7. When hwCBQoSRemarkType is DSCP (2) or ipv6-dscp (8), the value ranges…	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.5.25.32.1.1.2.5.1.2
hwCBQoSRemarkStringValue Destination-MAC(10): SIZE (0..6) HHHHHH for example: 010102020303 means the remark action is 'remark destination-mac 0101-0202-0303'; Vlan-Protocol(12):SIZE(3..4) HEX<600-FFFF>	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.32.1.1.2.5.1.3
hwCBQoSRemarkRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.5.1.4

A table of queueing feature configuration information.

hwCBQoSQueueCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1

Queue Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSQueueType Queueing Type: EF: (1) AF: (2) WFQ: (3) LLQ: (4)	CBQueueTyper/w	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.1
hwCBQoSQueueDropType The drop type of queue. Only valid for AF and WFQ queue. -1 is returned only when getting value about EF queue. -1 can't be set.	Enumerationr/w Enumerated Values: -1 unavailable 1 tailDrop 2 wred	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.2
hwCBQoSQueueLength The length of QueueLength. Only valid for tailDrop type of AF and WFQ queue. -1 is returned only when getting value about EF queue or wred type of AF and WFQ queue. -1 can't be set.	Integer32r/w Constraints: range: -1--1 range: 1-1024	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.3
hwCBQoSQueueBandwidthUnit Bandwidth Unit: Absolute, Unit Kbps (1) Percent, Unit % (2) Only valid for EF and AF queue. -1 is returned only when getting value about WFQ queue. -1 can't be set.	QueueBandwidthUnitr/w Type Values: -1 unitUnavailable 1 unitAbsolute 2 unitPercent 3 unitRemainPercent	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.4
hwCBQoSQueueBandwidthValue Bandwidth value: Absolute value: 8~1000000. Unit: Kbps Percent value: 1~100. Only valid for EF and AF queue. -1 is returned only when getting value about WFQ queue. -1 can't be set.	Integer32r/w Constraints: range: -1--1 range: 1-1000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.5
hwCBQoSQueueCbs Committed Burst Size. Unit: byte. Only valid for EF queue. -1 is returned only when getting value about AF or WFQ queue. -1 can't be set.	Integer32r/w Constraints: range: -1--1 range: 32-2000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.6
hwCBQoSQueueQueueNumber Max number of hashed queues (a power of 2). Only valid for WFQ. -1 is returned only when getting value about AF or EF queue. -1 can't be set.	Enumerationr/w Enumerated Values: -1 unavailable 1 a1 8 a8 16 a16 32 a32 64 a64 128 a128 256 a256 512 a512 1024 a1024 2048 a2048 4096 a4096	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.7
hwCBQoSQueueRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.8
hwCBQoSQueueCbsRatio Committed Burst Size Ratio. Unit: byte. CBS = CBS_Ratio * Bandwidth(k bps) Only valid for EF queue. -1 is returned only when getting value about AF or WFQ queue. -1 can't be set.	Integer32r/w Constraints: range: -1--1 range: 25-500	.1.3.6.1.4.1.2011.5.25.32.1.1.2.6.1.9

A table of WRED configuration information.

hwCBQoSWredCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.7.1

WRED Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSWredType IP-Prec Based (1) DSCP Based (2)	WredTyper/w Type Values: 1 typeIpPrecbased 2 typeDscpbased	.1.3.6.1.4.1.2011.5.25.32.1.1.2.7.1.1
hwCBQoSWredWeightConst Specify weight for calculating mean queue depth.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.32.1.1.2.7.1.2
hwCBQoSWredDropProfileIndex The index of wred class entry. -1 is returned when no drop profile is used. -1 can not be set.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.7.1.3
hwCBQoSWredCfgRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.7.1.4

A table of WRED configuration information.

hwCBQoSWredClassCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.8.1

WRED Class Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex hwCBQoSWredClassValue

Column	Syntax	OID
hwCBQoSWredClassValue The class value. For IP precedence based WRED, the class is IP precedence, and range is 0~7. For DSCP based WRED, the class is DSCP, and range is 0~63.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2011.5.25.32.1.1.2.8.1.1
hwCBQoSWredClassLowLimit The low limit of queue depth.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.25.32.1.1.2.8.1.2
hwCBQoSWredClassHighLimit The high limit of queue depth.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.25.32.1.1.2.8.1.3
hwCBQoSWredClassDiscardProb The discard probability denominator.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.5.25.32.1.1.2.8.1.4

A table of Nat configuration information.

hwCBQoSNatCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.10.1

Nat Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSNatAddressGroup address group's name	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.10.1.1
hwCBQoSNatNoPat 1: no pat 2: pat	Enumerationr/w Enumerated Values: 1 nopat 2 pat	.1.3.6.1.4.1.2011.5.25.32.1.1.2.10.1.2
hwCBQoSNatServiceClass The service class. DEFVAL: 2	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.2011.5.25.32.1.1.2.10.1.3
hwCBQoSNatRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.10.1.4

A table of Firewall configuration information.

hwCBQoSFirewallCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.11.1

Firewall Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSFirewallAction The value of this object identifies the firewall action. The value can be permit(1) or deny(2). The default value is permit(1).	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2011.5.25.32.1.1.2.11.1.1
hwCBQoSFirewallRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.11.1.2

A table of Sampling configuration information.

hwCBQoSSamplingCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.12.1

Sampling Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSIfSamplingType This object indicates the sampling type. The value can be any of the following: Fix-packets(1) Fix-time(2) Random-packets(3) Random-time(4) This object has no default value.	SamplingTyper/w	.1.3.6.1.4.1.2011.5.25.32.1.1.2.12.1.1
hwCBQoSSamplingNum This object indicates the sampling parameter. The value can be any of the following: Fix-packets (1-65535) Fix-time (5-30000ms) Random-packets (1-65535) Random-time (3/6/12/24/48/96/192/383.5/767/1534/3068/6136ms) This …	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.32.1.1.2.12.1.2
hwCBQoSSamplingRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.12.1.3

A table of Line Rate configuration information.

hwCBQoSLrCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1

LR Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSLrUnit CIR Unit: Absolute, Unit bps (1) Percent, Unit % (2)	LrCirUnitr/w Type Values: 1 absoluteUnitBps 2 percentUnit	.1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1.1
hwCBQoSLrCir Committed Information Rate. Absolute value: 8000..155000000. Unit: bps Percent value: 1~100.	Integer32r/w Constraints: range: 1-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1.2
hwCBQoSLrCbs Committed Burst Size. When CIR is absolute value, CBS value: 15000..155000000, default value: max(cir*1/2,15000), Unit: bit; When CIR is percent value, CBS value: 50..2000, default value: 500, Unit: ms.	Integer32r/w Constraints: range: 50-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1.3
hwCBQoSLrEbs Excess Burst Size. When CIR is absolute value, EBS value: 0..155000000, Unit: bit; When CIR is percent value, EBS value: 0..2000, Unit: ms.	Integer32r/w Constraints: range: 0-155000000	.1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1.4
hwCBQoSLrRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.13.1.5

A table of Hierachical Policy configuration information.

hwCBQoSNestPolicyCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.14.1

Hierachical Policy Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSNestPolicyName Name of hierachical traffic policy.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.2.14.1.1
hwCBQoSNestPolicyRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.14.1.2

A table of Redirect configuration information.

hwCBQoSRedirectCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1

Redirect Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex hwCBQoSRedirectType

Column	Syntax	OID
hwCBQoSRedirectType The value of this object identifies the traffic redirection type. The value can be ip-nexthop(2), ipv6-nexthop(5), or lsppath(6). This object has no default value.	RedirectType	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.1
hwCBQoSRedirectIpAddress This object indicates the destination address of the redirected traffic. The value of this object can be any valid IP address.This object has no default value.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.2
hwCBQoSRedirectIfIndex The value of this object identifies the outbound interface of the redirected traffic. This object has no value range, and the default value is 0.The outbound interface cannot be an interface of the Main Processing Unit …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.3
hwCBQoSRedirectVlanId The value of this object identifies the VLAN ID of the outbound interface of the redirected traffic.	Integer32r/w Constraints: range: -1-0 range: 2-4094	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.4
hwCBQoSRedirectCtrlType The value of this object identifies the traffic redirection control type.	RedirectCtrlTyper/w	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.5
hwCBQoSRedirectRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.6
hwCBQoSRedirectLSPDstIpAddress This object indicates the next hop of an LSP. The value of this object can be any valid IP address. This object has no default value.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.7
hwCBQoSRedirectLSPSecondary The value of this object identifies whether a primary or a standby LSP is used. The value can be mainLSPPath(1) or backupLSPPath(2). The default value is mainLSPPath(1).	Enumerationr/w Enumerated Values: -1 notConfigLSP 1 mainLSPPath 2 backupLSPPath	.1.3.6.1.4.1.2011.5.25.32.1.1.2.15.1.8

A table of Mirror configuration information.

hwCBQoSMirrorCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.16.1

Mirror Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSMirrorObserveIndex The mirror observe port number	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.32.1.1.2.16.1.1
hwCBQoSMirrorRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.16.1.2

A table of Urpf configuration information.

hwCBQoSUrpfCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.17.1

Urpf Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSUrpfCtrlType The value of this object identifies URPF control type. The value can be strict(1) or loose(2). This object has no default value.	UrpfCtrlTyper/w Type Values: 1 strict 2 loose	.1.3.6.1.4.1.2011.5.25.32.1.1.2.17.1.1
hwCBQoSUrpfAllowDefault The value of this object identifies whether URPF flags the default route. The value can be 0 or 1. 0: indicates that the default route is not allowed. 1: indicates that the default route is allowed. The default value is…	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.25.32.1.1.2.17.1.2
hwCBQoSUrpfRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.17.1.3

A table of Count configuration information.

hwCBQoSCountCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.18.1

Count Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSCountAction The Count action	Enumerationr/w Enumerated Values: 1 count	.1.3.6.1.4.1.2011.5.25.32.1.1.2.18.1.1
hwCBQoSCountRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.18.1.2

A table of Drop configuration information.

hwCBQoSHighDropCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.19.1

Drop Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSHighDropPrecedence The Drop Precedence	Enumerationr/w Enumerated Values: 1 high	.1.3.6.1.4.1.2011.5.25.32.1.1.2.19.1.1
hwCBQoSHighDropRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.19.1.2

A table of configuring load balance method.

hwCBQoSLoadBalanceCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.20.1

Load Balance Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSLoadBalanceType The value of this object identifies the type of the algorithm for load balancing. The value can be flow(1) or packet(2). The default value is flow(1).	Enumerationr/w Enumerated Values: 1 flow 2 packet	.1.3.6.1.4.1.2011.5.25.32.1.1.2.20.1.1
hwCBQoSLoadBalanceRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.20.1.2

A table of Egress GTS feature configuration information.

hwCBQoSEgressGtsCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.21.1

Egress GTS feature configuration information Entry.

Indexes

hwCBQoSBehaviorIndex hwCBQoSEgressGtsIfIndex

Column	Syntax	OID
hwCBQoSEgressGtsIfIndex Interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.21.1.1
hwCBQoSEgressGtsCir Committed Information Rate. Unit: kbps	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.21.1.2
hwCBQoSEgressGtsPir Peak information rate. Unit: kbps	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.21.1.3
hwCBQoSEgressGtsRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.21.1.4

This table is used to record service class configurations.

hwCBQoSServiceClassCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.22.1

ServiceClass feature configuration information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSServiceClassQueueId This object indicates the queue ID.	CosTyper/w Type Values: 1 be 2 af1 3 af2 4 af3 5 af4 6 ef 7 cs6 8 cs7	.1.3.6.1.4.1.2011.5.25.32.1.1.2.22.1.1
hwCBQoSServiceClassColor This object indicates the priority color of a flow queue.	Enumerationr/w Enumerated Values: 1 green 2 yellow 3 red	.1.3.6.1.4.1.2011.5.25.32.1.1.2.22.1.2
hwCBQoSServiceClassRowStatus This object indicates the priority row status of a flow queue. You can perform one of the following actions: active, createAndGo, and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.22.1.3
hwCBQoSServiceClassNoremarkflag QOS service class no remark flag.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.22.1.4

A table of Redirect MultiNHP configuration information.

hwCBQoSRedirectMULCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1

Redirect MultiNHP Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSRedirectMULIpAddress1 Indicates the first available next-hop IP address.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.1
hwCBQoSRedirectMULIfIndex1 Indicates the first available next-hop outbound interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.2
hwCBQoSRedirectMULIpAddress2 Indicates the second available next-hop IP address.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.3
hwCBQoSRedirectMULIfIndex2 Indicates the second available next-hop outbound interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.4
hwCBQoSRedirectMULIpAddress3 Indicates the third available next-hop IP address.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.5
hwCBQoSRedirectMULIfIndex3 Indicates the third available next-hop outbound interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.6
hwCBQoSRedirectMULIpAddress4 Indicates the fourth available next-hop IP address.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.7
hwCBQoSRedirectMULIfIndex4 Indicates the fourth available next-hop outbound interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.8
hwCBQoSRedirectMULCtrlType Indicates the redirection type.	RedirectCtrlTyper/w	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.9
hwCBQoSRedirectMULRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.23.1.10

Description.

hwCBQoSRandomDiscardCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.24.1

Description.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSRandomPercent Description.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.2011.5.25.32.1.1.2.24.1.1
hwCBQoSRandomDiscardRowStatus Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.24.1.50

Description.

hwCBQoSDenyPacketLengthCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1

Description.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSDenyPacketLengthOptype Description.	Enumerationr/w Enumerated Values: 1 range 2 eq 3 gt 4 lt	.1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1.1
hwCBQoSDenyPacketLengthMin Description.	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1.2
hwCBQoSDenyPacketLengthMax Description.	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1.3
hwCBQoSDenyPacketLength Description.	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1.4
hwCBQoSDenyPacketLengthRowStatus Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.25.1.50

Description.

hwCBQoSDAAStatisticsCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.26.1

Description.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSDAAStatisticsSummary Description.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.32.1.1.2.26.1.1
hwCBQoSDAAStatisticsRowStatus Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.26.1.50

Description.

hwCBQoSDAATariffLevelCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.27.1

Description.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSDAATariffLevelValue Description.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.2011.5.25.32.1.1.2.27.1.1
hwCBQoSDAATariffLevelRowStatus Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.27.1.50

A table of Remark Ip-Df configuration information.

hwCBQoSRemarkIpDfCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.28.1

Remark Ip-Df Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSRemarkIpDf 0: remark ip-df 0 1: remark ip-df 1	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.25.32.1.1.2.28.1.1
hwCBQoSRemarkIpDfRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.28.1.2

A table of drop profile configuration information.

hwCBQoSDropProfileCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.29.1

Drop Profile Configuration Information Entry.

Indexes

hwCBQoSDropProfileIndex

Column	Syntax	OID
hwCBQoSDropProfileIndex The value of this object identifies the index of the drop profile. The value ranges from 1 to 31. This object has no default value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.29.1.1
hwCBQoSDropProfileName This object indicates the name of the drop profile. The value of this object is a string of 1 to 31 visible ASCII characters, with no default value. Space cannot exist between the characters in the string. The initial s…	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.29.1.2
hwCBQoSDropProfileType 0: based on IP-precedence 1: based on dscp The default value is 0	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.25.32.1.1.2.29.1.3
hwCBQoSDropProfileRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.29.1.4

A table of drop profile class configuration information.

hwCBQoSDropProfileClassCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.30.1

Drop Profile Class Configuration Information Entry.

Indexes

hwCBQoSDropProfileIndex hwCBQoSDropProfileClassValue

Column	Syntax	OID
hwCBQoSDropProfileClassValue The value of this object identifies the value of WRED based on the class. IP precedence based WRED: the value ranges from 0 to 31. DSCP (DiffServ code points) based WRED: the value ranges from 0 to 63 This object has n…	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2011.5.25.32.1.1.2.30.1.1
hwCBQoSDropProfileLowLimit This object indicates the low limit for the WRED, the percent of the current queue length. The range of the value is 0 to 100. The default value is 30.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.32.1.1.2.30.1.2
hwCBQoSDropProfileHighLimit This object indicates the high limit for the WRED, the percent of the current queue length. The range of the value is 0 to 100. The default value is 100.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.32.1.1.2.30.1.3
hwCBQoSDropProfileDiscardProb This object indicates the discard probility for the WRED. The range of the value is 0 to 100. The default value is 10.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.32.1.1.2.30.1.4

A table of redirect vsi configuration information.

hwCBQoSRedirectVsiEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.31.1

Drop Profile Class Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSRedirectVsiName the vsi name of data flow redirected to.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.32.1.1.2.31.1.1
hwCBQoSRedirectVsiRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.31.1.2

A table of mqc Suppression configuration information.

hwCBQoSSuppressionCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1

Mqc Suppression Configuration Information Entry.

Indexes

hwCBQoSBehaviorIndex

Column	Syntax	OID
hwCBQoSSuppressionType This object indicates the suppression type.	Enumeration Enumerated Values: 1 broadcast 2 multicast 3 unkonwnunicast	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.1
hwCBQoSSuppressionCir The value of this object identifies the Committed Information Rate (CIR). The value ranges from 100 to 1000000, in kbit/s, with no default value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.2
hwCBQoSSuppressionCbs The value of this object identifies the Committed Burst Size (CBS). The value ranges from 10000 to 33554432 bytes. The default value is 10000 bytes.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.3
hwCBQoSSuppressionGreenAction The value of this object identifies the action adopted when CIR is not reached. pass (1), discard (2), The default value is pass (1).	CarActionr/w Type Values: 1 pass 2 discard 3 remarkIpPrec 4 remarkDscp 5 remarkMplsExp 6 remark	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.4
hwCBQoSSuppressionGreenRemarkValue The value is to remark When green action is remarking. the range is 11~81; the high bit represents service-class,the range is 1~8 (1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7) the low bit represents color,the range…	Integer32r/w Constraints: range: -1--1 range: 11-81	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.5
hwCBQoSSuppressionRedAction The value of this object identifies the action performed when CIR is exceeded. pass (1), discard (2), The default value is pass (1).	CarActionr/w Type Values: 1 pass 2 discard 3 remarkIpPrec 4 remarkDscp 5 remarkMplsExp 6 remark	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.6
hwCBQoSSuppressionRedRemarkValue The value is to remark When red action is remarking. For remarking DSCP, the range is 11~81; the high bit represents service-class,the range is 1~8 (1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7) the low bit represents…	Integer32r/w Constraints: range: -1--1 range: 11-81	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.7
hwCBQoSSuppressionRowStatus This object indicates the row status. The value of this object can be Active(1), CreateAndGo(4), or Destroy(6). This object has no default value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.2.32.1.8

A table of mirr full alarm information.

hwCBQosMirrorResourceAlarmEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.2.33.1

mirr full alarm Information Entry.

Indexes

hwCBQoSMirrorSlotId hwCBQoSMirrorServiceType hwCBQoSMirrorDirection

Column	Syntax	OID
hwCBQoSMirrorSlotId The information of the chassis.	OctetString	.1.3.6.1.4.1.2011.5.25.32.1.1.2.33.1.1
hwCBQoSMirrorServiceType Service Type.	OctetString	.1.3.6.1.4.1.2011.5.25.32.1.1.2.33.1.2
hwCBQoSMirrorDirection inbound or outbound.	OctetString	.1.3.6.1.4.1.2011.5.25.32.1.1.2.33.1.3

This table describes the basic information about QoS policies..

hwCBQoSPolicyCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1

Traffic Policy Configuration Information Entry.

Indexes

hwCBQoSPolicyIndex

Column	Syntax	OID
hwCBQoSPolicyIndex The value of this object identifies the policy index. The value ranges from 1 to 1024. This object has no default value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.1
hwCBQoSPolicyName This object indicates the policy name. The value of this object is a string of 1 to 127 visible ASCII characters. This object has no default value. Space cannot exist between the characters in the string. The initial sp…	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.2
hwCBQoSPolicyClassCount This object indicates the number of classes associated with the policy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.3
hwCBQoSPolicyConfigMode This object indicates the configuration mode associated with the policy.	Enumerationr/w Enumerated Values: -1 unavailable 1 config 2 auto	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.4
hwCBQoSPolicyRowStatus This object indicates the row status. The value can be one of the following: Active (1), CreateAndGo (4), and Destroy (6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.5
hwCBQoSPolicyShareFlag This object indicates whether the policy is shared. The value can be one of the following: multiple (1) and shared policy single (2). The default value is multiple (1).	Enumerationr/w Enumerated Values: 1 multiple 2 single	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.6
hwCBQoSPolicyStatisticsFlag This object indicates the flag deciding whether the policy statistics are enabled. The value of this object can be either of the following: enabled(1) disabled(2) The default value is disabled (2).	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.32.1.1.3.2.1.7

A table of QoS Policy classifier-behavior configuration information.

hwCBQoSPolicyClassCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1

This table describes the association between the traffic class and traffic behavior in a QoS policy.

Indexes

hwCBQoSPolicyIndex hwCBQoSPolicyClassIndex

Column	Syntax	OID
hwCBQoSPolicyClassIndex This object indicates the classifier index. The value ranges from 0 to 255.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.1
hwCBQoSPolicyClassClassifierIndex The value of the object identifies the index of the classifier applied by a policy. The value ranges from 0 to 4095. This object has no default value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.2
hwCBQoSPolicyClassClassifierName This object indicates the policy class name in a QoS policy. The value of this object is a string of 1 to 127 visible ASCII characters. This object has no default value. Space cannot exist between the characters in the …	OctetString Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.3
hwCBQoSPolicyClassBehaviorIndex This object indicates the behavior index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.4
hwCBQoSPolicyClassBehaviorName This object indicates the behavior name. The value is a string of 1-127 ASCII characters that can be displayed. Default value: Note: The character string cannot contain spaces. The first and last spaces are ignored.	OctetString Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.5
hwCBQoSPolicyClassPrecedence This object indicates the priority of a traffic classifier.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.6
hwCBQoSPolicyClassRowStatus This object indicates the row status. The value can be one of the following: Active (1), CreateAndGo (4), and Destroy (6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.3.3.1.7

Policy Share Mode feature configuration information.

hwCBQoSPolicyShareModeCfgInfoEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.3.4.1

Policy Share Mode feature configuration information Entry.

Indexes

hwCBQoSPolicyIndex

Column	Syntax	OID
hwCBQoSPolicyShareModeFlag The flag that the share Mode of a policy is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.32.1.1.3.4.1.1
hwCBQoSPolicyShareModeRowStatus RowStatus. Three actions are used: active, createAndGo, destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.3.4.1.2

This table describes the attributes of an interface on which a QoS policy is applied.

hwCBQoSIfApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1

Policy applied on interface Configuration Information Entry.

Indexes

hwCBQoSIfApplyPolicyIfIndex hwCBQoSIfApplyPolicyDirection

Column	Syntax	OID
hwCBQoSIfApplyPolicyIfIndex This object indicates the index of the interface to which the policy is applied. Value range: Default value: Note: The value cannot be the index of an interface on a main control board or a Layer 2 interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.1
hwCBQoSIfApplyPolicyDirection The value of this object identifies the direction in which a policy is applied. The value can be inbound(1) or outbound(2). This object has no default value.	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.2
hwCBQoSIfApplyPolicyName This object indicates the policy name. The value of this object is a string of 1 to 127 visible ASCII characters. This object has no default value. Space cannot exist between the characters in the string. The initial sp…	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.3
hwCBQoSIfApplyPolicyRowStatus This object indicates the row status. The value can be one of the following: Active (1), CreateAndGo (4), and Destroy (6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.4
hwCBQoSIfApplyPolicyLinkLayer This object indicates the forwarding layer at which the policy takes effect.	Enumerationr/w Enumerated Values: 1 linklayer 2 alllayer 3 iplayer 4 mplslayer	.1.3.6.1.4.1.2011.5.25.32.1.1.4.1.1.5

A table of QoS policy instance.

hwCBQoSAtmPvcApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1

Policy applied on ATM PVC Configuration Information Entry.

Indexes

hwCBQoSAtmPvcApplyPolicyIfIndex hwCBQoSAtmPvcApplyPolicyVPI hwCBQoSAtmPvcApplyPolicyVCI hwCBQoSAtmPvcApplyPolicyDirection

Column	Syntax	OID
hwCBQoSAtmPvcApplyPolicyIfIndex ATM Interface Index, equal to ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.1
hwCBQoSAtmPvcApplyPolicyVPI VPI value of ATM Interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.2
hwCBQoSAtmPvcApplyPolicyVCI VCI value of ATM Interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.3
hwCBQoSAtmPvcApplyPolicyDirection Policy direction: inbound (1) outbound (2)	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.4
hwCBQoSAtmPvcApplyPolicyName Name of Traffic Policy.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.5
hwCBQoSAtmPvcApplyPolicyRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.4.2.1.6

This table is used to display information about traffic policies applied to VLAN packets.

hwCBQoSIfVlanApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1

Policy applied on Ethernet Vlan Configuration Information Entry.

Indexes

hwCBQoSIfVlanApplyPolicyIfIndex hwCBQoSIfVlanApplyPolicyDirection hwCBQoSIfVlanApplyPolicyVlanid1 hwCBQoSIfVlanApplyPolicyVlanid2

Column	Syntax	OID
hwCBQoSIfVlanApplyPolicyIfIndex This object indicates the policy index of a Layer 2 interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.1
hwCBQoSIfVlanApplyPolicyDirection Indicates the direction to which the policy is applied.	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.2
hwCBQoSIfVlanApplyPolicyVlanid1 This object indicates the start VLAN ID of a policy on a Layer 2 interface..	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.3
hwCBQoSIfVlanApplyPolicyVlanid2 Start VLAN ID or CE VID of a traffic policy on a Layer 2 interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.4
hwCBQoSIfVlanApplyPolicyCeVidEnd This object indicates the CE VID of a policy on a Layer 2 interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.5
hwCBQoSIfVlanApplyPolicyName Indicates the policy name.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.6
hwCBQoSIfVlanApplyPolicyRowStatus This object indicates the status of the policy row on a Layer 2 interface. The value can be one of the following: active, createAndGo, and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.7
hwCBQoSIfVlanApplyPolicyLinkLayer Indicates the link layer. The value range is: link-layer(1),all-layer(2),ip-layer(3),mpls-layer(4).	Enumerationr/w Enumerated Values: 1 linklayer 2 alllayer 3 iplayer 4 mplslayer	.1.3.6.1.4.1.2011.5.25.32.1.1.4.3.1.8

A table of QoS policy instance.

hwCBQoSFrClassApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.4.1

Policy applied on fr class Configuration Information Entry.

Indexes

hwCBQoSFrClassApplyPolicyFrClassName hwCBQoSFrClassApplyPolicyDirection

Column	Syntax	OID
hwCBQoSFrClassApplyPolicyFrClassName The name of fr class.	OctetString Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.4.1.1
hwCBQoSFrClassApplyPolicyDirection Policy direction: inbound (1) outbound (2)	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.4.1.2
hwCBQoSFrClassApplyPolicyName Name of Traffic Policy.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.4.1.3
hwCBQoSFrClassApplyPolicyRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.4.4.1.4

A table of QoS policy instance.

hwCBQoSFrPvcApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.5.1

Policy applied on FR PVC Configuration Information Entry.

Indexes

hwCBQoSFrPvcApplyPolicyIfIndex hwCBQoSFrPvcApplyPolicyDlciNum hwCBQoSFrPvcApplyPolicyDirection

Column	Syntax	OID
hwCBQoSFrPvcApplyPolicyIfIndex Fr Interface Index, equal to ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.5.1.1
hwCBQoSFrPvcApplyPolicyDlciNum Fr DLCI number.	Integer32 Constraints: range: 16-1007	.1.3.6.1.4.1.2011.5.25.32.1.1.4.5.1.2
hwCBQoSFrPvcApplyPolicyDirection Policy direction: inbound (1) outbound (2)	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.5.1.3
hwCBQoSFrPvcApplyPolicyName Name of Traffic Policy.	OctetString Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.5.1.4

A table of QoS policy instance.

hwCBQoSVsiApplyPolicyEntry row .1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1

Policy applied on VSI Configuration Information Entry.

Indexes

hwCBQoSVsiApplyPolicyVsiIndex hwCBQoSVsiApplyPolicyDirection

Column	Syntax	OID
hwCBQoSVsiApplyPolicyVsiIndex VSI Interface Index, equal to ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1.1
hwCBQoSVsiName Vlan of Ethernet Interface.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1.2
hwCBQoSVsiApplyPolicyDirection Policy direction: inbound (1) outbound (2)	DirectionType Type Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1.3
hwCBQoSVsiApplyPolicyName Name of Traffic Policy.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1.4
hwCBQoSVsiApplyPolicyRowStatus RowStatus. Three actions are used: active, createAndGo, destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.32.1.1.4.6.1.5