Standard view Table view

HPVCMODULE-MIB

        This MIB module describes module specific MIB objects present in each of the
Virtual Connect Ethernet (VC-Enet) Modules. These objects represent 
information about individual VC-Enet modules irrespective of its VC domain
role.
vcModuleMIB 1.3.6.1.4.1.11.5.7.5.2.3
Imported Objects
IF-MIB ifIndex ifInErrors ifOutErrors InterfaceIndex
RFC1155-SMI enterprises
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero
SNMPv2-TC RowPointer TEXTUAL-CONVENTION TruthValue
TRANSPORT-ADDRESS-MIB TransportAddress TransportAddressType
Type Definitions (5)
VcEnclosureRole Enumeration
unknown(1)
primary(2)
secondary(3)
VcModulePortBpduLoopStatus Enumeration
ok(1)
loop-detected(2)
VcModulePortProtectionStatus Enumeration
ok(1)
pause-flood-detected(2)
in-pause-condition(3)
VcModuleRole Enumeration
unintegrated(1)
primaryProtected(2)
primaryUnprotected(3)
standby(4)
other(5)
VcModuleType Enumeration
vcModuleEnet(1)
vcModuleFC(2)
vcModuleOther(3)
Objects (28)
hp .1.3.6.1.4.1.11
hpSysMgt .1.3.6.1.4.1.11.5
hpEmbeddedServerMgt .1.3.6.1.4.1.11.5.7
hpModuleMgmtProc .1.3.6.1.4.1.11.5.7.5
virtualConnect .1.3.6.1.4.1.11.5.7.5.2
vcModuleMIB .1.3.6.1.4.1.11.5.7.5.2.3
vcModuleMIBObjects .1.3.6.1.4.1.11.5.7.5.2.3.1
vcModuleObjects .1.3.6.1.4.1.11.5.7.5.2.3.1.1
vcModuleDomainName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.11.5.7.5.2.3.1.1.1
vcModuleRole VcModuleRole .1.3.6.1.4.1.11.5.7.5.2.3.1.1.2
vcModuleDomainPrimaryAddressType TRANSPORT-ADDRESS-MIBTransportAddressType .1.3.6.1.4.1.11.5.7.5.2.3.1.1.3
vcModuleDomainPrimaryAddress TRANSPORT-ADDRESS-MIBTransportAddress .1.3.6.1.4.1.11.5.7.5.2.3.1.1.4
vcModuleEnclosureRole VcEnclosureRole .1.3.6.1.4.1.11.5.7.5.2.3.1.1.5
vcModulePortTable .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6
vcModulePortEntry vcModulePort .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6.1
vcModulePort Integer32 .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6.1.1
vcModulePortIfIndex IF-MIBInterfaceIndex .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6.1.2
vcModulePortBpduLoopStatus VcModulePortBpduLoopStatus .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6.1.3
vcModulePortProtectionStatus VcModulePortProtectionStatus .1.3.6.1.4.1.11.5.7.5.2.3.1.1.6.1.4
vcModuleDomainPrimaryAddressIpv6 TRANSPORT-ADDRESS-MIBTransportAddress .1.3.6.1.4.1.11.5.7.5.2.3.1.1.7
vcSwitchMemParityErrorCount SNMPv2-SMICounter32 .1.3.6.1.4.1.11.5.7.5.2.3.1.1.8
vcSwitchMemParityErrorNonCorrectableCount SNMPv2-SMICounter32 .1.3.6.1.4.1.11.5.7.5.2.3.1.1.9
vcModuleMIBNotificationPrefix .1.3.6.1.4.1.11.5.7.5.2.3.2
vcModuleMIBNotifications .1.3.6.1.4.1.11.5.7.5.2.3.2.0
vcModuleMIBNotificationObjects .1.3.6.1.4.1.11.5.7.5.2.3.2.1
vcModuleMIBConformance .1.3.6.1.4.1.11.5.7.5.2.3.3
vcModuleMIBCompliances .1.3.6.1.4.1.11.5.7.5.2.3.3.1
vcModuleMIBGroups .1.3.6.1.4.1.11.5.7.5.2.3.3.2
Notifications / Traps (15)
NameOIDDescription
vcModuleDomainRoleChange
vcModuleRole
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.1 
The VCM role of the VC module has changed.
vcModPortInputUtilizationUp
IF-MIBifIndex
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.11 
The port input utilization rate has exceeded high threshold.
          
The input line utilization on a port has exceeded its threshold
for longer than the threshold averaging period. The ifIndex
is the index of the affected port in ifTable.
vcModPortInputUtilizationDown
IF-MIBifIndex
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.12 
The port input utilization rate has dropped below low watermark.
          
The input line utilization on a port has dropped below its low 
watermark for longer than the threshold averaging period. The ifIndex
is the index of the affected port in ifTable.
vcModPortOutputUtilizationUp
IF-MIBifIndex
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.13 
The port output utilization rate has exceeded high threshold.
          
The output line utilization on a port has exceeded its high watermark
for longer than the threshold averaging period. The ifIndex
is the index of the affected port in ifTable.
vcModPortOutputUtilizationDown
IF-MIBifIndex
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.14 
The port output utilization rate has dropped below low watermark.
          
The output line utilization on a port has dropped below its low watermark
for longer than the threshold averaging period. The ifIndex
is the index of the affected port in ifTable.
vcModPortInputErrorsUp
IF-MIBifIndex IF-MIBifInErrors
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.15 
The input error count on a port has exceeded high watermark.
          
The input error count on a port has exceeded its high watermark for
longer than the error averaging period. The port is identified by
ifIndex in ifTable.
vcModPortInputErrorsDown
IF-MIBifIndex IF-MIBifInErrors
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.16 
The input error count on a port has dropped below low watermark.
          
The input error count on a port has dropped below its low watermark for
longer than the error averaging period. The port is identified by
ifIndex in ifTable.
vcModPortOutputErrorsUp
IF-MIBifIndex IF-MIBifOutErrors
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.17 
The output error count on a port has exceeded its high watermark.
          
The output error count on a port has exceeded its high watermark for
longer than the error averaging period. The port is identified by
ifIndex in ifTable.
vcModPortOutputErrorsDown
IF-MIBifIndex IF-MIBifOutErrors
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.18 
The output error count on a port has dropped below its low watermark.
          
The output error count on a port has dropped below its low watermark for
longer than the error averaging period. The port is identified by
ifIndex in ifTable.
vcModPortBpduLoopDetected
IF-MIBifIndex vcModulePort vcModulePortBpduLoopStatus
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.19 
A BPDU loop condition is detected on this port.
          
If the port is configured for loop protection, the port is 
disabled to protect against network loops. The port remains disabled
until administrative action is taken.
vcSwitchMemParityErrorEvent
vcSwitchMemParityErrorCount
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.2 
The switch hardware has detected a parity error. The parity error
is automatically corrected.
vcModPortBpduLoopCleared
IF-MIBifIndex vcModulePort vcModulePortBpduLoopStatus
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.20 
A previous BPDU loop condition is cleared.
          
This trap is only sent when the agent detects transition from 'loop
detected' state to 'ok' state on a given port.
vcModPortProtectionConditionDetected
IF-MIBifIndex vcModulePort vcModulePortProtectionStatus
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.21 
A port protection condition is detected on this port.
          
If the new port protection status is a value other than ok,
the port may be disabled to protect the VC module from further
 service degradation.
vcModPortProtectionConditionCleared
IF-MIBifIndex vcModulePort vcModulePortProtectionStatus
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.22 
Port is recovered from port protection condition.
          
The port is recovered from port protection condition to normal
operational state.
vcSwitchMemParityErrorNonCorrectableEvent
vcSwitchMemParityErrorNonCorrectableCount cpqHoFwVerLocation
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.3 
The switch hardware has detected a parity/ECC error. The parity/ecc error
is non Correctable. cpqHoFwVerLocation identifies the Rack, Enclosurename
 and Bay number where the parity/ecc error occured. cpqHoFwVerLocation is
 represented in <RackName>:<EnclosureName>:<Bay Number> format