HPR-IP-MIB

        The MIB module for HPR over IP.  This module contains two
groups:
        
 -  the HPR over IP Monitoring Group provides a count of the UDP
    packets sent by a link station for each APPN traffic type.
        
 -  the HPR over IP Configuration Group provides for reading and
    setting the mappings between APPN traffic types and TOS
    Precedence settings in the IP header.  These mappings are
        
    configured at the APPN port level, and are inherited by the
    APPN connection networks and link stations associated with an
    APPN port.  A port-level mapping can, however, be overridden
    for a particular connection network or link station.
    
Source file
HPR-IP-MIB
Last revised
Identity
hprIp
Base OID
1.3.6.1.2.1.34.6.1.5
Imported Objects
APPN-MIB SnaControlPointName
HPR-MIB hprCompliances hprGroups hprObjects
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HPR-IP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HPR-IP-MIB::hprIp'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPR-IP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPR-IP-MIB::hprIp'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (23)
.1.3.6.1.2.1.34.6.1.5
.1.3.6.1.2.1.34.6.1.5.1
.1.3.6.1.2.1.34.6.1.5.1.1
OctetString
.1.3.6.1.2.1.34.6.1.5.1.1.1
.1.3.6.1.2.1.34.6.1.5.1.1.2
.1.3.6.1.2.1.34.6.1.5.1.1.3
.1.3.6.1.2.1.34.6.1.5.2
.1.3.6.1.2.1.34.6.1.5.2.1
OctetString
.1.3.6.1.2.1.34.6.1.5.2.1.1
.1.3.6.1.2.1.34.6.1.5.2.1.2
.1.3.6.1.2.1.34.6.1.5.2.1.3
.1.3.6.1.2.1.34.6.1.5.3
.1.3.6.1.2.1.34.6.1.5.3.1
OctetString
.1.3.6.1.2.1.34.6.1.5.3.1.1
.1.3.6.1.2.1.34.6.1.5.3.1.2
.1.3.6.1.2.1.34.6.1.5.3.1.3
.1.3.6.1.2.1.34.6.1.5.3.1.4
.1.3.6.1.2.1.34.6.1.5.4
.1.3.6.1.2.1.34.6.1.5.4.1
.1.3.6.1.2.1.34.6.1.5.4.1.1
.1.3.6.1.2.1.34.6.1.5.4.1.2
.1.3.6.1.2.1.34.6.1.5.4.1.3
.1.3.6.1.2.1.34.6.1.5.4.1.4
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNA-NAU-MIBrfc
  6. APPN-MIBrfc
  7. HPR-MIBrfc
  8. HPR-IP-MIBrfcselected
Type Definitions (2)
OctetString range: 3
Enumeration
low(1)
medium(2)
high(3)
network(4)
llcAndFnRoutedNlp(5)
Conformance Groups (2)
An object for counting outgoing HPR/IP traffic for each APPN
traffic type.
.1.3.6.1.2.1.34.6.2.2.5
A collection of HPR/IP objects representing the mappings
between APPN traffic types and TOS Precedence bits at the APPN
port, APPN link station, and APPN connection network levels.
.1.3.6.1.2.1.34.6.2.2.6
Compliance Statements (1)

OID .1.3.6.1.2.1.34.6.2.1.2
Compliance statement for the HPR over IP MIB module.
Required groups
optional hprIpMonitoringGroup The hprIpMonitoringGroup is mandatory for APPN implementations
supporting HPR over IP.
optional hprIpConfigurationGroup The hprIpConfigurationGroup is mandatory for APPN
implementations supporting HPR over IP. It may, however,
be implemented as a collection of read-only objects.
Object refinements
ObjectAccessSyntaxDescription
hprIpAppnPortTOSPrecedence readonly
Write access is not required.
hprIpLsTOSPrecedence readonly
Write access is not required.
hprIpLsRowStatus readonly
Write access is not required.
hprIpCnTOSPrecedence readonly
Write access is not required.
hprIpCnRowStatus readonly
Write access is not required.