HPN-ICF-VSAN-MIB Table View

A table contains all the VSANs configured on the device.  It can
be used to manage and monitor the VSANs on local device.

hpnicfVsanEntry row .1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1

An entry that contains information about a VSAN in the hpnicfVsanTable.

Indexes

hpnicfVsanIndex

Column	Syntax	OID
hpnicfVsanIndex The identifier of the VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcVsanIndex Type Constraints: range: 1..4095	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.1
hpnicfVsanCoreSwitchName The Core Switch_Name of the VSAN, which is indicated by the switch's WWN(World Wide Name).	OctetString Constraints: range: 8-8 range: 16-16	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.2
hpnicfVsanRowStatus RowStatus. Now only three states are supported: createAndGo, active, and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.3

A table contains domain management related configurations
and information of VSANs.
An entry in this table is created when corresponding VSAN
is created, as well as deleted when the VSAN is deleted.

hpnicfVsanDmEntry row .1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1

An entry of domain management related configurations
and information of a specified VSAN.

Indexes

hpnicfVsanIndex

Column	Syntax	OID
hpnicfVsanDmDomainConfigureEnable To enable or disable the fabric configuration function in this VSAN. true: enabled, the fabric will be built dynamically. false: disabled, the fabric should be built statically by manual configurations.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.1
hpnicfVsanDmFabricNameConfigured Specifies the fabric name in this VSAN, and will use a zero-length octet string as default value if not configured. The fabric name specified here takes effect only if the value of hpnicfVsanDmDomainConfigureEnable is '…	HPN-ICF-FC-TC-MIBHpnicfFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.2
hpnicfVsanDmPriorityConfigured Specifies the priority of a switch in this VSAN, which is used during principal switch selection to cause one Switch to be favored over another.	HPN-ICF-FC-TC-MIBHpnicfFcDomainPriorityr/w Type Constraints: range: 1..254	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.3
hpnicfVsanDmAllowedDomainIdList Specifies the list of domain IDs that are allowed in the VSAN, and the configuration has different meanings in different scenarios: 1. Principal switch: Can only assign domains IDs within the allowed d…	HPN-ICF-FC-TC-MIBHpnicfFcDomainIdListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.4
hpnicfVsanDmDomainIdConfigured Used to configure or cancel a domain ID for a switch in this VSAN. When this value is not zero, the domain ID type should be specified together via hpnicfVsanDmDomainIdTypeConfigured, or the default value…	HPN-ICF-FC-TC-MIBHpnicfFcDomainIdOrZeror/w Type Constraints: range: 0..239	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.5
hpnicfVsanDmDomainIdTypeConfigured Specifies the type of configured domain ID, which can be static type or preferred type.	Enumerationr/w Enumerated Values: 1 static 2 preferred	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.6
hpnicfVsanDmAutoReconfigureEnable Used to specify whether a disruptive reconfiguration will be automatically performed when the domain ID lists overlaps in fabric merging. The fabric reconfiguration function takes effect only when the val…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.7
hpnicfVsanDmDomainRestart Used to manually trigger a disruptive or non-disruptive reconfiguration of the fabric.	Enumerationr/w Enumerated Values: 1 noOperation 2 nonDisruptive 3 disruptive	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.8
hpnicfVsanDmState Indicates the managing state of the domain in this VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcDmState Type Values: 1 disabledWithNoDomain 2 disabledWithDomainCfg 3 stableWithNoEports 4 stableWithDomainCfg 5 stableWithNoDomain 6 principalSwitchInSelect 7 domainIdRequesting 8 buildFabricPhase 9 reconfigureFabricPhase 10 unknown	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.9
hpnicfVsanDmDomainIdAssigned Indicates the Domain ID of the local switch in this VSAN or zero if no Domain ID has been assigned.	HPN-ICF-FC-TC-MIBHpnicfFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.10
hpnicfVsanDmPrincipalSwitchWWN Indicates the WWN of the principal switch in this VSAN, or zero-length string if the identity of the principal switch is unknown.	HPN-ICF-FC-TC-MIBHpnicfFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.11
hpnicfVsanDmLocalSwitchWWN Indicates the WWN of the local switch in this VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.12
hpnicfVsanDmPrincipalSwRunPriority Indicates the running priority of the principal switch in this VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcDomainPriority Type Constraints: range: 1..254	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.13
hpnicfVsanDmLocalSwRunPriority Indicates the running priority of the local switch in this VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcDomainPriority Type Constraints: range: 1..254	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.14
hpnicfVsanDmPrincipalSwSlctCnt The times that local switch has participated in principal switch selection in this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.15
hpnicfVsanDmLocalPrincipalSwSlctCnt The times that local switch was elected as principal switch in this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.16
hpnicfVsanDmBFCnt The times that local switch has participated in a BF(Build Fabric) process in this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.17
hpnicfVsanDmRCFCnt The times that local switch has participated in a RCF (Reconfigure Fabric) process in this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.18

A table contains the FC(Fibre Channel) related interface
configurations about domain management of a VSAN.

hpnicfVsanDmIfConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1

An entry used for managing the FC related interface
configurations about domain management of a VSAN.
An entry can be created when any object in this table is
set to non-default value, and be deleted when the objects
in…

Indexes

IF-MIBifIndex hpnicfVsanIndex

Column	Syntax	OID
hpnicfVsanDmIfConfigRcfReject Used to specify whether the RCF(Reconfigure Fabric) requests received in this VSAN should be rejected. - true: the received RCF will be rejected. - false: the received RCF will be accepted.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1.1

A table specifies the information of the switch
about all the Domain IDs which have been assigned
in each of the VSANs.

hpnicfVsanDmDatabaseEntry row .1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1

An object in the hpnicfVsanDmDatabaseTable contains one
Domain ID and the corresponding WWN of the switch in
one VSAN.

Indexes

hpnicfVsanIndex hpnicfVsanDmDatabaseDomainId

Column	Syntax	OID
hpnicfVsanDmDatabaseDomainId The Domain ID which has been assigned.	HPN-ICF-FC-TC-MIBHpnicfFcDomainId Type Constraints: range: 1..239	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.1
hpnicfVsanDmDatabaseSwitchWWN The WWN of the switch to which the corresponding Domain ID has been assigned in the particular VSAN.	HPN-ICF-FC-TC-MIBHpnicfFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.2

A table specifies the information of an interface
in each of the VSANs.

hpnicfVsanDmIfInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1

A conceptual row in the hpnicfVsanDmIfInfoTable indicates the
role information of the interface in the particular VSAN.

Indexes

IF-MIBifIndex hpnicfVsanIndex

Column	Syntax	OID
hpnicfVsanDmIfInfoRole The role of the interface in the VSAN. The value specifications are listed as follows: nonPrincipal - The state of the interface is not principal interface in the VSAN. pri…	Enumeration Enumerated Values: 1 nonPrincipal 2 principalUpstream 3 principalDownstream 4 isolated 5 unknown	.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1.1