will be triggered if a Domain ID is not
assigned or configured, then the E_ports may be isolated
in the VSAN. The conditions are listed as follows:
1. If the switch has enabled the fabric configuration and
a request for a configured static Domain ID is rejected
or no other Domain ID is assigned, the E_ports will be
isolated in the particular VSAN.
2. If the switch does not enable the fabric configuration
and a Domain ID is not configured, all of its E_ports
will be isolated in the particular VSAN.
The notification contains the WWN of the Switch and
the index of the VSAN in which the event occurred.
hpnicfVsanDmNewPrincipalSwitchNotify
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.2
h becomes the new Principal Switch in a VSAN, this
notification is sent immediately after the election.
The notification contains the WWN of the new Principal Switch
and the index of the VSAN in which the transition occurred.
hpnicfVsanDmFabricChangeNotify
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.3
will be triggered if a switch sends or receives a
Build Fabric (BF) or a Reconfigure Fabric (RCF) message in a
VSAN.
The conditions a switch can receive or send a BF or a RCF are
listed as follows:
1. Two isolated fabrics in a VSAN merge into one fabric. If
the Domain ID lists do not overlap, the sent or received
message is BF, other cases, it is RCF.
2. If an upstream principal link which connects to principal
switch and other switches become disconnected, the sent or
received message is BF.
3. A BF or RCF process is triggered manually by configuration.
The notification contains the index of the VSAN in which a BF
or a RCF was sent or received.
hpnicfVsanDmDomainIdChangeNotify
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.4
will be triggered if the Domain ID of the local switch
changed in a VSAN.