HPN-ICF-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
50

hpnicfTunnelIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfTable' 
The (conceptual) table containing information on configured tunnels.
hpnicfTunnelIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1
An entry (conceptual row) containing the information on a
particular configured tunnel.
Indexes
Column Syntax OID
hpnicfTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
HpnicfTunnelTyper/w
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
35tunnelModeReserve
36tunnelModeIPv4Gre
37tunnelModeIPv6Gre
38tunnelModeIPv4IPv4
39tunnelModeIPv4IPv6Config
40tunnelModeIPv4IPv6Auto
41tunnelModeIPv4IPv66to4
42tunnelModeIPv4IPv6Isatap
43tunnelModeIPv6IPv4
44tunnelModeIPv6IPv6
45tunnelModeIPv4UdpDVPN
46tunnelModeIPv4GreDVPN
47tunnelModeIPv6UdpDVPN
48tunnelModeIPv6GreDVPN
49tunnelModeCrLsp
50tunnelModeMax
51tunnelModeIPv4UdpVxlan
52tunnelModeIPv6UdpVxlan
53tunnelModeIPv4NVGRE
54tunnelModeIPv6NVGRE
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.3
hpnicfTunnelIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.4
hpnicfTunnelIfSecurity
The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
informati…
Enumeration
Enumerated Values:
1none
2ipsec
3other
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.5
hpnicfTunnelIfTOS
The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicates that the bits are copied from the
payload's header. …
Integer32
Constraints:
range: -2-63
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.6
hpnicfTunnelIfFlowLabel
The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
hpnicfTunnelIfAddressType indicates the tunnel is not over
IPv6. A value of -1 indicates that a traffic
conditioner is inv…
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
Type Constraints:
range: -1..1048575
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.7
hpnicfTunnelIfAddressType
The type of address in the corresponding
hpnicfTunnelIfLocalInetAddress and hpnicfTunnelIfRemoteInetAddress
objects.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.8
hpnicfTunnelIfLocalInetAddress
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by hpni…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.9
hpnicfTunnelIfRemoteInetAddress
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the val…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.10
hpnicfTunnelIfEncapsLimit
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.11

hpnicfTunnelInetConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelInetConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigTable' 
The (conceptual) table containing information on
configured tunnels.  This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value.  It can also be used for row creation.  Note
that every row in the hpnicfTunnelIfTable with a fixed
destination address should have a corresponding row in
the hpnicfTunnelInetConfigTable, regardless of whether it
was created via SNMP.
hpnicfTunnelInetConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1
An entry (conceptual row) containing the information
on a particular configured tunnel.
Indexes
Column Syntax OID
hpnicfTunnelInetConfigSlot
Slot number. hpnicfTunnelInetConfigSlot, hpnicfTunnelInetConfigSubSlot
and hpnicfTunnelInetConfigTunnNum describe a tunnel interface.
For Example, interface tunnel 0/0/25 would be configured as:
hpnicfTunnelInetConfigS…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.1
hpnicfTunnelInetConfigSubSlot
Sub slot number. As described in hpnicfTunnelInetConfigSlot's description.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.2
hpnicfTunnelInetConfigTunnNum
Tunnel number. As described in hpnicfTunnelInetConfigSlot's description.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.3
hpnicfTunnelInetConfigIfIndex
If the value of hpnicfTunnelInetConfigStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that t…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.6
hpnicfTunnelInetConfigStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.7

hpnicfTunnelEviTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelEviTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviTable' 
The (conceptual) table containing information on configured EVI-Tunnel.
hpnicfTunnelEviEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1
An entry (conceptual row) containing the information on a
particular configured EVI-Tunnel.
Indexes
Column Syntax OID
hpnicfTunnelEviTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.1
hpnicfTunnelEviIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.2
hpnicfTunnelEviStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.3
hpnicfTunnelEviAddressType
The type of address in the corresponding
hpnicfTunnelEviLocalAddr objects.
Can not be modified after creation.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.4
hpnicfTunnelEviLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). The type of this object is given by
hpnicfTunnelEviAddressType.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.5
hpnicfTunnelEviNetworkID
The method used to assign a network ID to an EVI-Tunnel interface.
Assign the same network ID to the EVI-Tunnel interfaces of
all edge devices in an EVI network. A value of 0 indicates that
no network ID is assigned to…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.6
hpnicfTunnelEviKeepaliveInterval
The method used to assign the keepalive interval.
Integer32r/w
Constraints:
range: 1-32767
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.7
hpnicfTunnelEviKeepaliveTimes
The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.8

hpnicfTunnelEviLinkTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelEviLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkTable' 
The (conceptual) table containing information on configured EVI-Link.
hpnicfTunnelEviLinkEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1
An entry (conceptual row) containing the information on a
particular configured EVI-Link.
Indexes
Column Syntax OID
hpnicfTunnelEviLinkNum
EVI-Link number.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.1
hpnicfTunnelEviLinkIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.2
hpnicfTunnelEviLinkAddressType
The type of address in the corresponding
hpnicfTunnelEviLinkRemoteAddr objects.
Can not be modified after creation.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.3
hpnicfTunnelEviLinkRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.4

hpnicfTunnelGreTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelGreTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreTable' 
The (conceptual) table containing information on configured Gre-Tunnel.
hpnicfTunnelGreEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1
An entry (conceptual row) containing the information on a
particular configured Gre-Tunnel.
Indexes
Column Syntax OID
hpnicfTunnelGreTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.1
hpnicfTunnelGreTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.2
hpnicfTunnelGreAddressType
The type of address in the corresponding
hpnicfTunnelGreLocalAddr and hpnicfTunnelGreRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.3
hpnicfTunnelGreLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.4
hpnicfTunnelGreRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.5
hpnicfTunnelGreKeepaliveEnabled
This MIB object specifies whether or not keepalive is used.
A value of true indicates that keepalive SHOULD be used.
When keepalive is not be used, the value of
hpnicfTunnelGreKeepaliveInterval and hpnicfTunnelGreKeepal…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.6
hpnicfTunnelGreKeepaliveInterval
The method used to assign the keepalive interval.
The value is zero when keepalive is not used.
The valid value is from 1 to 32767, when keepalive is used.
Integer32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.7
hpnicfTunnelGreKeepaliveTimes
The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
The value is zero when keepalive is not used.
The valid value is from 1 to 255, when keepalive is used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.8
hpnicfTunnelGreSlbgGroupNum
The method used to assign the service-loopback-group.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.9
hpnicfTunnelGreTunnStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.10

hpnicfTunnelVxlanIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelVxlanIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfTable' 
The (conceptual) table containing information on configured Vxlan-Tunnel.
hpnicfTunnelVxlanIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1
An entry (conceptual row) containing the information on a
particular configured Vxlan-Tunnel.
Indexes
Column Syntax OID
hpnicfTunnelVxlanIfTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.1
hpnicfTunnelVxlanTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.2
hpnicfTunnelVxlanIfAddressType
The type of address in the corresponding
hpnicfTunnelVxlanIfLocalAddr and hpnicfTunnelVxlanIfRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.3
hpnicfTunnelVxlanIfLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.4
hpnicfTunnelVxlanIfRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.5
hpnicfTunnelVxlanIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.6

hpnicfTunnelTotalNumTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelTotalNumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelTotalNumTable' 
Total number of a particular method tunnel.
hpnicfTunnelTotalNumEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1
Total number of a particular method tunnel.
Indexes
Column Syntax OID
hpnicfTunnelEncapsMethod
The encapsulation method used by the tunnel.
HpnicfTunnelType
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
35tunnelModeReserve
36tunnelModeIPv4Gre
37tunnelModeIPv6Gre
38tunnelModeIPv4IPv4
39tunnelModeIPv4IPv6Config
40tunnelModeIPv4IPv6Auto
41tunnelModeIPv4IPv66to4
42tunnelModeIPv4IPv6Isatap
43tunnelModeIPv6IPv4
44tunnelModeIPv6IPv6
45tunnelModeIPv4UdpDVPN
46tunnelModeIPv4GreDVPN
47tunnelModeIPv6UdpDVPN
48tunnelModeIPv6GreDVPN
49tunnelModeCrLsp
50tunnelModeMax
51tunnelModeIPv4UdpVxlan
52tunnelModeIPv6UdpVxlan
53tunnelModeIPv4NVGRE
54tunnelModeIPv6NVGRE
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1.1
hpnicfTunnelTotalNum
Total number of a particular method tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1.2

hpnicfTunnelNvgreIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfTunnelNvgreIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-TUNNEL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfTable' 
The (conceptual) table containing information on configured Nvgre-Tunnel.
hpnicfTunnelNvgreIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1
An entry (conceptual row) containing the information on a
particular configured Nvgre-Tunnel.
Indexes
Column Syntax OID
hpnicfTunnelNvgreIfTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.1
hpnicfTunnelNvgreTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.2
hpnicfTunnelNvgreIfAddressType
The type of address in the corresponding
hpnicfTunnelNvgreIfLocalAddr and hpnicfTunnelNvgreIfRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.3
hpnicfTunnelNvgreIfLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.4
hpnicfTunnelNvgreIfRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.5
hpnicfTunnelNvgreIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.6