HPN-ICF-PPP-OVER-SONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
28

hpnicfPosParamTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1 · 1 row entry · 28 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfPosParamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-PPP-OVER-SONET-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosParamTable' 
The pos parameter table.
hpnicfPosParamTableEntry row .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1
The entry of pos table.
Indexes
Column Syntax OID
hpnicfPosCRC
The length of CRC
Enumerationr/w
Enumerated Values:
1crc32
2crc16
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.1
hpnicfPosMTU
Maximum Transfer Unit (MTU) of POS interface
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.2
hpnicfPosScramble
Scrambling is used to avoid continuous 0 or 1 in signals. This
object is to decide whether to scramble or not
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.3
hpnicfPosClockSource
The value indicates the source of clock signal. System indicates
that clock signals are from device itself and line for clock signals
from remote
Enumerationr/w
Enumerated Values:
1system
2line
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.4
hpnicfPosSdhFlagJ0
The section trace byte. This node is used when the frame type is sdh.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.5
hpnicfPosSdhFlagJ1
The path trace byte. This node is used when the frame type is sdh.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.6
hpnicfPosSonetFlagJ0
The section trace byte. This node is used when the frame type is sonet.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.7
hpnicfPosSonetFlagJ1
The path trace byte. This node is used when the frame type is sonet.
OctetStringr/w
Constraints:
range: 0-62
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.8
hpnicfPosFlagC2
The parameter for the channel signal value of C2 byte
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.9
hpnicfPosFrameType
The frame type that encapsulates the packet. Default frame type is
sdh(Synchronous Digital Hierarchy) It also can be configured using
sonet type(Synchronous Optical Network).
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.10
hpnicfPosBindVlanId
The vlan that this pos port binds. The vlan can not include any other
port, otherwise error will be returned. If the vlan has a virtual
interface, the status of virtual interface will be up or down according
to the link…
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.11
hpnicfPosEncapsulation
The type of encapsulation
Enumerationr/w
Enumerated Values:
1ppp
2hdlc
3fr
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.12
hpnicfPoskeepaliveTimeout
The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two
members of a link should have same keeplive. The default 0 prohibits
detecting status of link.
Integer32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13
hpnicfPosBERthresholdSF
The bit-error rate threshold for Signal Fault. SF threshold should
be greater than SD threshold.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.14
hpnicfPosBERthresholdSD
The bit-error rate threshold for Signal Degrade. SD threshold should
be less than SF threshold.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.15
hpnicfPosB1Error
Counter for SBIPE(Section Bit Interleave Parity Error)
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.16
hpnicfPosB2Error
Counter for LBIPE(Line Bit Interleave Parity Error)
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.17
hpnicfPosB3Error
Counter for PBIPE(Path Bit Interleave Parity Error)
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.18
hpnicfPosM1Error
How many times does LREI(Line Remote Error Indication) occur
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.19
hpnicfPosG1Error
How many times does PREI(Path Remote Error Indication) occur
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.20
hpnicfPosFlagJ0Type
The frame type that encapsulates the flag J0. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.21
hpnicfPosFlagJ1Type
The frame type that encapsulates the flag J1. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.22
hpnicfPosB1TCAThreshold
Threshold for B1 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.23
hpnicfPosB2TCAThreshold
Threshold for B2 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.24
hpnicfPosB3TCAThreshold
Threshold for B3 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.25
hpnicfPosB1TCAEnable
Enable traps of B1 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.26
hpnicfPosB2TCAEnable
Enable traps of B2 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.27
hpnicfPosB3TCAEnable
Enable traps of B3 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.28