HPN-ICF-MPLS-BGP-VPN-MIB Table View

This table specifies per-interface MPLS capability
and associated information.

hpnicfmplsVpnInterfaceConfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1

An entry in this table is created by an LSR for
every interface capable of supporting MPLS/BGP VPN.
Each entry in this table is meant to correspond to
an entry in the Interfaces Table.

Indexes

hpnicfmplsVpnVrfName hpnicfmplsVpnInterfaceConfIndex

Column	Syntax	OID
hpnicfmplsVpnInterfaceConfIndex This is a unique index for an entry in the hpnicfmplsVpnInterfaceConfTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.1
hpnicfmplsVpnInterfaceLabelEdgeType Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set.	Enumeration Enumerated Values: 1 providerEdge 2 customerEdge	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.2
hpnicfmplsVpnInterfaceVpnClassification Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.	Enumeration Enumerated Values: 1 carrierOfCarrier 2 enterprise 3 interProvider	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.3
hpnicfmplsVpnInterfaceIpAddress The IP address of this interface.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.4
hpnicfmplsVpnInterfaceIpAddressMask The IP address mask of this interface.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.5
hpnicfmplsVpnInterfaceConfRowStatus The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will ha…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.6

This table specifies per-interface MPLS/BGP VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces. Note that
multiple interfaces can belong to the same VRF
instance. The collection of all VRF instances
comprises an actual VPN.

hpnicfmplsVpnVrfConfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface.

Indexes

hpnicfmplsVpnVrfName

Column	Syntax	OID
hpnicfmplsVpnVrfName The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.	HpnicfMplsVpnId Type Constraints: range: 0..31	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.1
hpnicfmplsVpnVrfRouteDistinguisher The route distinguisher for this VRF.	HpnicfMplsVpnRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.2
hpnicfmplsVpnVrfNetPrefixType Denotes the type network prefix in use for the PE-CE connections.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf 4 isis 5 bgp 6 static	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.3
hpnicfmplsVpnVrfNetPrefix Denotes the network prefix for the PE-CE connections.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.4
hpnicfmplsVpnVrfIpRouteRedistributeConn Denotes the redistribution of directly connected networks into the VRF BGP table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.5
hpnicfmplsVpnVrfIpRouteRedistributeStatic Denotes the redistribution of static routes into the VRF BGP table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.6
hpnicfmplsVpnVrfIpRouteRedistributeRip Denotes the redistribution of rip routes into the VRF BGP table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.7
hpnicfmplsVpnVrfConfHighRouteThreshold Denotes high-level water marker for the number of routes which this VRF may hold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.8
hpnicfmplsVpnVrfConfIsWarnOnly Denotes the action when the amount of VPN's routes exceed the hpnicfmplsVpnVrfConfHighRouteThreshold.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.9
hpnicfmplsVpnVrfConfMaxRoutes Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hpnicfmplsVrfMaxPossibleRoutes unless it is set to 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.10
hpnicfmplsVpnVrfConfRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.11

This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN.

hpnicfmplsVpnVrfRouteTargetEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1

An entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS/BGP VPN instance. The indexing provides an
ordering per-VRF instance.

Indexes

hpnicfmplsVpnVrfName hpnicfmplsVpnVrfRouteTarget hpnicfmplsVpnVrfRouteTargetType

Column	Syntax	OID
hpnicfmplsVpnVrfRouteTarget The route target distribution policy.	HpnicfMplsVpnRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.1
hpnicfmplsVpnVrfRouteTargetType The route target export distribution type.	Enumeration Enumerated Values: 1 import 2 export	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.2
hpnicfmplsVpnVrfRouteTargetRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.3

This table specifies per-interface MPLS/BGP neighbor
addresses for both PEs and CEs.

hpnicfmplsVpnVrfBgpNbrAddrEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1

An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface.

Indexes

hpnicfmplsVpnVrfName hpnicfmplsVpnVrfBgpNbrAddr

Column	Syntax	OID
hpnicfmplsVpnVrfBgpNbrAddr Denotes the BGP neighbor address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.1
hpnicfmplsVpnVrfBgpNbrRole Denotes the role played by this BGP neighbor with respect to this VRF.	Enumerationr/w Enumerated Values: 1 ce 2 pe	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.2
hpnicfmplsVpnVrfBgpNbrType Denotes the address family of the PE address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.3
hpnicfmplsVpnVrfBgpNbrAsNumber The Automonous System that the BGP's neighbour in.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.4
hpnicfmplsVpnVrfBgpNbrAdminStatus The action set by SNMP client.	Enumerationr/w Enumerated Values: 1 mplsVpnVrfBgpNbrSetUp 2 mplsVpnVrfBgpNbrSetDown	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.5
hpnicfmplsVpnVrfBgpNbrRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.6

This table specifies per-interface MPLS/BGP VPN VRF Table
routing information. Entries in this table define VRF routing
entries associated with the specified MPLS/VPN interfaces. Note
that this table contains both BGP and IGP routes, as both may
appear in the same VRF.

hpnicfmplsVpnVrfRouteEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1

An entry in this table is created by an LSR for every route
present configured (either dynamically or statically) within
the context of a specific VRF capable of supporting MPLS/BGP
VPN. The indexing provides an orderin…

Indexes

hpnicfmplsVpnVrfName hpnicfmplsVpnVrfRouteDest hpnicfmplsVpnVrfRouteMask hpnicfmplsVpnVrfRouteNextHop

Column	Syntax	OID
hpnicfmplsVpnVrfRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.1
hpnicfmplsVpnVrfRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the hpnicfmplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an ag…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.2
hpnicfmplsVpnVrfRouteNextHop On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.3
hpnicfmplsVpnVrfRouteIfIndex The ifIndex value that identifies the local interface through which the next hop of this route should be reached.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.4
hpnicfmplsVpnVrfRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumerationr/w Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.5
hpnicfmplsVpnVrfRouteRowStatus Row status for this table. It is used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.6