HPN-ICF-LswVLAN-MIB Table View

hpnicfdot1qVlanMcastUnknownProtos

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.5

Whether to broadcast the unknown packets.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.6

hpnicfExistInterface

Whether there is virtual interface.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.7

hpnicfVlanInterfaceIndex

Whether vlan interface is configured on vlan. If vlan interface is
configured, the value of the node is vlan id, else the value is 0.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.8

hpnicfdot1qVlanMacLearn

MAC address learning identity. (common vlan/Sub-vlan)

hpnicfdot1qVlanCreationTime

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.9

hpnicfdot1qVlanStatus

Status of the VLAN.

Enumeration

Enumerated Values:

1	other
2	static
3	dynamic

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.10

The sysUPTime when the VLAN is created.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.11

hpnicfdot1qVlanPriority

Priority of the VLAN.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.12

hpnicfdot1qVlanRowStatus

Operation status.

hpnicfdot1qVlanBroadcastSuppression

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.13

Whether broadcast suppression of vlan be supported pro rata.
The vlaue of 100 indicates no broadcast suppression. If the
function is not supported, this object cannot be written,
and 100 will be returned when reading

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.14

hpnicfdot1qVlanBcastSuppressionPPS

If the broadcast can be controlled with pps(packet per second)type,
the value of 0 indicates no suppression. This node is conflicted
with hpnicfdot1qVlanBroadcastSuppression. If the mode is set,
hpnicfdot1qVlanBroadcast…

Integer32r/w

Constraints:
range: 0-148800

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.15

hpnicfdot1qVlanMulticast

Multicast vlan. The default value is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.16

hpnicfdot1qVlanTaggedPorts

Tagged port list of the VLAN.

HPN-ICF-LswINF-MIBPortList

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.17

hpnicfdot1qVlanUntaggedPorts

Untagged port list of the VLAN.

HPN-ICF-LswINF-MIBPortList

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.18

hpnicfdot1qVlanPortIndexs

PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.

OctetStringr/w

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.19

hpnicfVlanInterfaceTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfVlanInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceTable'

Virtual interface configuration table

hpnicfVlanInterfaceEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1

Entries of virtual interface configuration table

Indexes

hpnicfVlanInterfaceID

Column Syntax OID

hpnicfVlanInterfaceID

Index of the vlan interface table.

hpnicfdot1qVlanIpAddressMask

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.1

hpnicfdot1qVlanID

VLAN-ID

HpnicfVlanIndex

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.2

hpnicfdot1qVlanIpAddress

IP address of interface.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.3

IP address mask of interface.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.4

hpnicfVlanInterfaceAdminStatus

Status of VLAN virtual interfaces.

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.5

hpnicfVlanInterfaceFrameType

Frame type accepted by VLAN virtual interfaces.

Enumeration

Enumerated Values:

1	ethernet-ii
2	ethernet-snap
3	ethernet-8022
4	ethernet-8023

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.6

hpnicfInterfaceRowStatus

Operation status.

hpnicfVlanInterfaceIpMethod

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.7

Vlan interface ip address acquiring method which is manual, dhcp or bootp.

Enumerationr/w

Enumerated Values:

1	assigned-ip
2	dhcp-ip
3	bootp-ip

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.8

hpnicfVlanInterfaceIfIndex

IfIndex of VLAN interface.

hpnicfifIsolatePrimaryVlanID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.9

hpnicfifIsolateMappingTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfifIsolateMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfifIsolateMappingTable'

Secondary vlan lists of Isolate-VLANs.

hpnicfifIsolateMappingEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1

Secondary vlan lists of Isolate-VLANs.

Indexes

Column	Syntax	OID
hpnicfifIsolatePrimaryVlanID Primary VLAN-ID.	HpnicfVlanIndex Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.1`
hpnicfifIsolateSecondaryVlanlistLow Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.2`
hpnicfifIsolateSecondaryVlanlistHigh Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.3`

hpnicfVlanInterfaceAddrTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5 · 1 row entry · 5 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfVlanInterfaceAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceAddrTable'

VLAN interface IP address configuration table

hpnicfVlanInterfaceAddrEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1

Entries of VLAN interface IP address configuration table

Indexes

hpnicfVlanInterfaceIpIfIndex hpnicfVlanInterfaceIpAddr

Column Syntax OID

hpnicfVlanInterfaceIpIfIndex

Index of VLAN interfaces.

hpnicfVlanInterfaceIpAddr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.1

IP address of VLAN interface.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.2

hpnicfVlanInterfaceIpMask

IP address mask of VLAN interface. When destory single IP address,
you must set it correct to relative IP address.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.3

hpnicfVlanInterfaceIpType

IP address type.

Enumerationr/w

Enumerated Values:

1	primary
2	sub
3	cluster
4	vrrp

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.4

hpnicfVlanInterfaceIpRowStatus

Operation status. active(1) will only be set when taking GET or
GET NEXT operation. createAndGo(4) and destory(6) is valid when
taking SET operation.

hpnicfdot1qVlanBatchOperIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.5

hpnicfDot1qVlanBatchMIBTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfDot1qVlanBatchMIBTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfDot1qVlanBatchMIBTable'

VLAN batch configuration table.
In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should
be set to 1.
For example, if creating a row is for creating VLANs 2 to 4, the value
of the objects should be set as follows:
hpnicfdot1qVlanBatchStartIndex 2,
hpnicfdot1qVlanBatchEndIndex 4,
hpnicfdot1qVlanBatchSetOperate create(1),
hpnicfdot1qVlanBatchRowStatus createAndGo(4).
          
In the case of VLAN batch deletion, hpnicfdot1qVlanBatchSetOperate should
be set to 2.
For example, if creating a row is for deleting VLANs 10 to 20, the value
of the objects should be set as follows:
hpnicfdot1qVlanBatchStartIndex 10,
hpnicfdot1qVlanBatchEndIndex 20,
hpnicfdot1qVlanBatchSetOperate delete(2),
hpnicfdot1qVlanBatchRowStatus createAndGo(4).
          
When the action of batch VLANs deleting or creating is done, one row
will be existent until it is deleted manually or ages out, but the VLANs
of it won't disappear with the deletion of the row.

hpnicfDot1qVlanBatchMIBEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1

VLAN batch configuration entry.

Indexes

Column Syntax OID

hpnicfdot1qVlanBatchOperIndex

The consequence of operation.

hpnicfdot1qVlanBatchStartIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.1

The value of start VLAN-ID.

HpnicfVlanIndexr/w

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.2

hpnicfdot1qVlanBatchEndIndex

The value of end VLAN-ID.

HpnicfVlanIndexr/w

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.3

hpnicfdot1qVlanBatchOperStatus

The status of operation.

Enumeration

Enumerated Values:

1	opInprogress
2	opfailure
3	opsuccess
4	opsuccesspartial

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.4

hpnicfdot1qVlanBatchRowStatus

The row status of HpnicfDot1qVlanBatchMIBEntry.

hpnicfdot1qVlanBatchSetOperate

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.5

VLAN batch creation or deletion.

Enumerationr/w

Enumerated Values:

1	create
2	delete

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.6

hpnicfifSuperVlanMappingTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfifSuperVlanMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfifSuperVlanMappingTable'

Sub VLAN lists of super-VLANs.

hpnicfifSuperVlanMappingEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1

Sub VLAN lists of super-VLANs.

Indexes

hpnicfifSuperVlanID

Column	Syntax	OID
hpnicfifSuperVlanID Super VLAN ID.	HpnicfVlanIndex Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.1`
hpnicfifSubVlanlistLow Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.2`
hpnicfifSubVlanlistHigh Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3`

hpnicfPrivateVlanMappingTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8 · 1 row entry · 3 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfPrivateVlanMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfPrivateVlanMappingTable'

Secondary vlan lists of Primary-VLANs.

hpnicfPrivateVlanMappingEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1

Secondary vlan lists of Primary-VLANs.

Indexes

hpnicfPrimaryVlanID

Column	Syntax	OID
hpnicfPrimaryVlanID Primary VLAN-ID.	HpnicfVlanIndex Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.1`
hpnicfSecondaryVlanlistLow Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represen…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.2`
hpnicfSecondaryVlanlistHigh Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bi…	OctetStringr/w Constraints: `range: 0-256`	`.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3`

hpnicfvLANMibSwitchCountTable

table

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15 · 1 row entry · 6 columns

Open in standard view

Uses the hp variant from /opt/observium/mibs/hp.

Command help

Walk hpnicfvLANMibSwitchCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswVLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswVLAN-MIB::hpnicfvLANMibSwitchCountTable'

A table containing the information various statistics of switch.

hpnicfvLANMibSwitchCountEntry row .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1

A table containing the information various statistics of switch.

Indexes

No indexes recorded

Column Syntax OID

hpnicfVLANMibSwitchGMRPRXPkt

Number of GMRP frames received.

hpnicfVLANMibSwitchGVRPRXPkt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.1

Number of GVRP frames received.

hpnicfVLANMibSwitchGMRPTXPkt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.2

Number of GMRP frames transmitted.

hpnicfVLANMibSwitchGVRPTXPkt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.3

Number of GVRP frames transmitted.

hpnicfVLANMibSwitchDiscardedPkt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.4

Number of discarded frames.