HPN-ICF-IP-ADDRESS-MIB Table View

The table of address information is relevant to this
entity's IPv4 addresses for setting. The address information
that can be read and set in this table is a subset of the
address information that can be read in hpnicfIpAddrReadTable
and ipAddrTable in IP-MIB. This table is used to configure IPv4
addresses of an interface identified by hpnicfIpAddrSetIfIndex.
When users create or delete an entry in this table, the agent also
increases or reduces a corresponding entry in the
hpnicfIpAddrReadTable and ipAddrTable in IP-MIB.
When an interface which has been assigned IPv6 address is deleted,
the agent also deletes the entry corresponding to the interface
in this table and hpnicfIpAddrReadTable.
All IPv4 addresses in this table will also show in ipAddrTable in
IP-MIB.

hpnicfIpAddrSetEntry row .1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1

Define the IPv4 address information.

Indexes

hpnicfIpAddrSetIfIndex hpnicfIpAddrSetAddrType hpnicfIpAddrSetAddr

Column	Syntax	OID
hpnicfIpAddrSetIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.1
hpnicfIpAddrSetAddrType The IP address type to which this entry's address information pertains. The value must be ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.2
hpnicfIpAddrSetAddr The IPv4 address to which this entry's address information pertains.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.3
hpnicfIpAddrSetMask The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.4
hpnicfIpAddrSetSourceType Indicate the type of source of the IPv4 address.	Enumerationr/w Enumerated Values: 1 assignedIp	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.5
hpnicfIpAddrSetCatalog Indicate the category of the IPv4 address.	Enumerationr/w Enumerated Values: 1 primary 2 sub	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.6
hpnicfIpAddrSetRowStatus This object is used to create a new row or delete an existing row in this table, only support active, createAndGo and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.7

The table of address information is relevant to this
entity's IP addresses for reading. This is the extension
of the ipAddrTable in IP-MIB.
All IPv4 addresses in this table will also show in ipAddrTable
in IP-MIB.

hpnicfIpAddrReadEntry row .1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1

Define the IPv4 address information.

Indexes

hpnicfIpAddrReadIfIndex hpnicfIpAddrReadAddrType hpnicfIpAddrReadAddr

Column	Syntax	OID
hpnicfIpAddrReadIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.1
hpnicfIpAddrReadAddrType The IP address type to which this entry's address information pertains. The value must be ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.2
hpnicfIpAddrReadAddr The IPv4 address to which this entry's address information pertains.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.3
hpnicfIpAddrReadMask The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.4
hpnicfIpAddrReadSourceType Indicate the type of source of the IPv4 address.	Enumeration Enumerated Values: 1 assignedIp 2 cluster 3 dhcp 4 bootp 5 negotiate 6 unnumbered 7 vrrp	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.5
hpnicfIpAddrReadCatalog Indicate the category of the IPv4 address.	Enumeration Enumerated Values: 1 primary 2 sub 3 cluster 4 vrrp	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.6

This table is used to configure primary IPv4 address of an
interface identified by ifIndex.

hpnicfIpv4AddrEntry row .1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1

Define the IPv4 address information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfIpv4AddrAddr The IPv4 address to which this entry's address information pertains.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.1
hpnicfIpv4AddrMask The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.2
hpnicfIpv4AddrRowStatus This object is used to create a new row or delete an existing row in this table, only support active, notInService, createAndGo and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.3