HPN-ICF-HPEOC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
17

hpnicfHPEOCCltVlanManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfHPEOCCltVlanManTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-HPEOC-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltVlanManTable' 
This table implements the management of CLT(Coax Line Terminal)
VLAN.
hpnicfHPEOCCltVlanManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1
The entry of the table hpnicfHPEOCCltVlanManTable.
Indexes
Column Syntax OID
hpnicfHPEOCCltEthPortType
Control CLT ethernet ports' type,
normal : port which used for normal translation,
debug : port which used for debug.
Enumerationr/w
Enumerated Values:
1normal
2debug
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1

hpnicfHPEOCCltSysManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfHPEOCCltSysManTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-HPEOC-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltSysManTable' 
This table implements the management of CLT(Coax Line Terminal).
hpnicfHPEOCCltSysManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1
The entry of the table hpnicfHPEOCCltSysManTable.
Indexes
Column Syntax OID
hpnicfHPEOCCltDescr
Set the description of CLT.
OctetStringr/w
Constraints:
range: 0-126
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1
hpnicfHPEOCCltFwVersion
EOC firmware version. If the object length is
zero, it means the version is unknown.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2
hpnicfHPEOCCltLinkState
The cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the …
Enumeration
Enumerated Values:
1physicaldown
2linkdown
3linkup
4loopback
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3

hpnicfHPEOCCnuSysManTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfHPEOCCnuSysManTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-HPEOC-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuSysManTable' 
This table implements the management of CNUs.
hpnicfHPEOCCnuSysManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1
The entry of the table hpnicfHPEOCCnuSysManTable.
Indexes
Column Syntax OID
hpnicfHPEOCCnuBcastControl
Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1
hpnicfHPEOCCnuAnonymStatus
Anonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2
hpnicfHPEOCCnuMacLimit
Configure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address e…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3

hpnicfHPEOCCableInfoTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfHPEOCCableInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-HPEOC-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-HPEOC-MIB::hpnicfHPEOCCableInfoTable' 
This table defines the primary parameters of the
cable information.
hpnicfHPEOCCableInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1
The entry of the table hpnicfHPEOCCableInfoTable.
Indexes
Column Syntax OID
hpnicfHPEOCFECErrors
The cable port's FEC bits errors ratio. FEC means the
payload Forward Error Correction. It's a technology of
controlling errors. Packets in transmission is checked by
the receiver, if error occurs, the receiver will …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1
hpnicfHPEOCAvgBitsPerCarrier
The cable port's average bits per carrier.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2
hpnicfHPEOCAvgSNRPerCarrier
The cable port's signal noise ratio(SNR) bits per carrier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3
hpnicfHPEOCAvgInPBCRCErrors
The input PB CRC errors on average.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4
hpnicfHPEOCInTotalPkts
The total number of packets(including bad packets)
received on this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5
hpnicfHPEOCAvgOutPower
The cable port's power sent on average, the unit is db.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6
hpnicfHPEOCAvgOutPBCRCErrors
The cable port's physical block(PB) cyclic redundancy
check(CRC) errors sent on average.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7
hpnicfHPEOCOutTotalPkts
The total count of the packets(including bad packets)
sent on this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8

hpnicfHPEOCBitPerSymbolTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfHPEOCBitPerSymbolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-HPEOC-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-HPEOC-MIB::hpnicfHPEOCBitPerSymbolTable' 
This table defines the bits per symbol parameters of the
cable line.
hpnicfHPEOCBitPerSymbolEntry row .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1
The entry of the table hpnicfHPEOCBitPerSymbolTable.
Indexes
Column Syntax OID
hpnicfHPEOCBitPerSymbolIndex
The index of the hpnicfHPEOCBitPerSymbolTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1
hpnicfHPEOCBitPerSymbol
hpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed
frequency. Each 4 bits stand for one value, all the values
picking-up will make up a cable bit map.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2