HPN-ICF-EPON-MIB Table View

This table defines system related parameters.

hpnicfEponSysManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1

The entry of the table hpnicfEponSysManTable.

Indexes

hpnicfEponSlotIndex

Column	Syntax	OID
hpnicfEponSlotIndex Slot Index, the index of hpnicfEponSysManTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1
hpnicfEponModeSwitch cmode - epon standard mode. hmode - private mode.	Enumerationr/w Enumerated Values: 1 cmode 2 hmode	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2
hpnicfEponAutomaticMode Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable aut…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3
hpnicfEponOamDiscoveryTimeout Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4
hpnicfEponEncryptionNoReplyTimeOut Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5
hpnicfEponEncryptionUpdateTime Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6
hpnicfEponAutoBindStatus enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7

EPON auto update ONU application configuration.

hpnicfEponAutoUpdateEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1

The entry of the table hpnicfEponAutoUpdateTable.

Indexes

hpnicfEponSlotIndex

Column	Syntax	OID
hpnicfEponAutoUpdateFileName The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1
hpnicfEponAutoUpdateSchedStatus The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2
hpnicfEponAutoUpdateSchedTime The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges fr…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3
hpnicfEponAutoUpdateSchedType The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.	Enumerationr/w Enumerated Values: 1 daily 2 weekly 3 comingdate	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4
hpnicfEponAutoUpdateRealTimeStatus The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5

Next OUI index table.

hpnicfEponOuiIndexNextEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1

The entry of the table hpnicfEponOuiIndexNextTable.

Indexes

hpnicfEponSlotIndex

Column	Syntax	OID
hpnicfEponOuiIndexNext This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1

List of OUI and OAM supported by OLT.

hpnicfEponOuiEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1

The entry of the table hpnicfEponOuiTable.

Indexes

hpnicfEponSlotIndex hpnicfEponOuiIndex

Column	Syntax	OID
hpnicfEponOuiIndex The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1
hpnicfEponOuiValue OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2
hpnicfEponOamVersion Version of OAM protocol defined by the organization denoted by OUI.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3
hpnicfEponOuiRowStatus The status of this table entry. Only active, createAndGo and the destory are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4

Multicast control global configuration.

hpnicfEponMulticastControlEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1

The entry of the table hpnicfEponMulticastControlTable.

Indexes

hpnicfEponMulticastVlanId

Column	Syntax	OID
hpnicfEponMulticastVlanId The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1
hpnicfEponMulticastAddressList The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2
hpnicfEponMulticastStatus The status of this table entry. Only active, createAndGo and the destory are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3

This table defines several OLT system parameters:
(1)laser on time
(2)laser off time
(3)whether multiple copy broadcast
(4)whether discard packet
(5)self test
(6)self test result

hpnicfOltSysManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1

The entry of the table hpnicfOltSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOltLaserOnTime The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1
hpnicfOltLaserOffTime The laser off time of the ONUs during the discovery process, measured in TQ.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2
hpnicfOltMultiCopyBrdCast true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP cont…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3
hpnicfOltEnableDiscardPacket Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4
hpnicfOltSelfTest selftest(1): Test OLT to check whether it's OK.	Enumerationr/w Enumerated Values: 1 selftest	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5
hpnicfOltSelfTestResult The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.	Enumeration Enumerated Values: 1 other 2 ok 3 fail	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6
hpnicfOltMaxRtt Set the max Round Trip Time of this OLT.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7

Primary status of the specified OLT.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified OLT
(hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion,
hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion)
(2)Several physical capabilities of an OLT device.
(hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime)
(3)The operation(activation) status of an OLT.
(hpnicfOltMacAddress, hpnicfOltWorkMode)

hpnicfOltInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1

The entry of the table hpnicfOltInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOltFirmMajorVersion OLT firmware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1
hpnicfOltFirmMinorVersion OLT firmware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2
hpnicfOltHardMajorVersion OLT hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3
hpnicfOltHardMinorVersion OLT hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4
hpnicfOltAgcLockTime PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5
hpnicfOltAgcCdrTime PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6
hpnicfOltMacAddress OLT MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7
hpnicfOltWorkMode The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.	Enumeration Enumerated Values: 1 other 2 open 3 reset 4 closed	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8
hpnicfOltOpticalPowerTx The optical power transmitted by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9
hpnicfOltOpticalPowerRx The burst optical power received by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10

This table defines the primary parameters of the
Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.

hpnicfOltDbaManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1

The entry of the table hpnicfOltDbaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOltDbaEnabledType Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorith…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1
hpnicfOltDbaDiscoveryLength Discovery length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2
hpnicfOltDbaDiscovryFrequency How often should the OLT send discovery frames to the ONUs, measured in grant cycles.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3
hpnicfOltDbaCycleLength The grant cycle length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4
hpnicfOltDbaVersion DBA version of the OLT.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5
hpnicfOltDbaUpdate Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6
hpnicfOltDbaUpdateResult The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist…	Enumeration Enumerated Values: 1 other 2 ok 3 fail 4 fileNotExist 5 notSetFilename	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7

The table defines the alarm threshold of OLT.

hpnicfOltPortAlarmThresholdEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1

The entry of the table hpnicfOltPortAlarmThresholdTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOltPortAlarmBerEnabled Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1
hpnicfOltPortAlarmBerDirect Traffic direction to monitor for BER alarm.	Enumerationr/w Enumerated Values: 1 berUplink 2 berDownlink 3 berAll	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2
hpnicfOltPortAlarmBerThreshold BER threshold exceed which the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3
hpnicfOltPortAlarmFerEnabled Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4
hpnicfOltPortAlarmFerDirect Traffic direction to monitor for FER alarm.	Enumerationr/w Enumerated Values: 1 ferUplink 2 ferDownlink 3 ferAll	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5
hpnicfOltPortAlarmFerThreshold Frame error rate exceed threshold then the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6
hpnicfOltPortAlarmLlidMismatchEnabled Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7
hpnicfOltPortAlarmLlidMismatchThreshold The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8
hpnicfOltPortAlarmRemoteStableEnabled Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9
hpnicfOltPortAlarmLocalStableEnabled Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10
hpnicfOltPortAlarmRegistrationEnabled Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11
hpnicfOltPortAlarmOamDisconnectionEnabled Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12
hpnicfOltPortAlarmEncryptionKeyEnabled Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13
hpnicfOltPortAlarmVendorSpecificEnabled Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14
hpnicfOltPortAlarmRegExcessEnabled Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15
hpnicfOltPortAlarmDFEEnabled Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16

This table is used for getting silent ONU information of OLT.

hpnicfOnuSilentEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1

The entry of the table hpnicfOnuSilentTable.

Indexes

IF-MIBifIndex hpnicfOnuSilentMacAddr

Column	Syntax	OID
hpnicfOnuSilentMacAddr The MAC address of silent ONUs in OLT.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1
hpnicfOnuSilentTime The aging time of a silent ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2

The table containing configurations to manage ONU interface(s)
based on OLT interface.

hpnicfOltUsingOnuEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1

The entry of the table hpnicfOltUsingOnuTable.

Indexes

IF-MIBifIndex hpnicfOltUsingOnuNum

Column	Syntax	OID
hpnicfOltUsingOnuNum The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1
hpnicfOltUsingOnuIfIndex The ifIndex of the ONU interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2
hpnicfOltUsingOnuRowStatus This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3

This table implements the following functions for ONUs:
1. Encrypting all downstream/upstream and
downstream directions traffic destined to and
originated from a specific LLID
(ONU in current implementation).
2. Restart a process of ONU authentication, using
the OLT (IEEE 802.1x) authenticator.

hpnicfOnuSysManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1

The entry of the table hpnicfOnuSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuEncryptMan Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. I…	Enumerationr/w Enumerated Values: 1 off 2 downlink 3 updownlink	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1
hpnicfOnuReAuthorize Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remai…	Enumerationr/w Enumerated Values: 1 reAuthorize	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2
hpnicfOnuMulticastFilterStatus true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3
hpnicfOnuDbaReportQueueSetNumber The number of queue sets reported in MPCP report frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4
hpnicfOnuRemoteFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error co…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5
hpnicfOnuPortBerStatus enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6
hpnicfOnuReset Reboot ONU.	Enumerationr/w Enumerated Values: 1 reset	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7
hpnicfOnuMulticastControlMode igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.	Enumerationr/w Enumerated Values: 1 igmpsnooping 2 multicastcontrol	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8
hpnicfOnuAccessVlan The VLAN ID assigned to untagged frames received on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9
hpnicfOnuEncryptKey The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10
hpnicfOnuUniUpDownTrapStatus true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11
hpnicfOnuFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12
hpnicfOnuMcastCtrlHostAgingTime The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13
hpnicfOnuMulticastFastLeaveEnable true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14
hpnicfOnuPortIsolateEnable true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15

LLID link test applying to the ONU only including delay
measurement option.  The command tests a link to a single
LLID over a period of time or once, using a variable
number of measurement frames.  The length of the measurement
frames is also parameterized.  The test uses a loopback
mode of the ONU to return each measurement frame,
loopback activation is done using randomly patterned
OAM Protocol Data Unit(PDU) frames.

hpnicfOnuLinkTestEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1

The entry of hpnicfOnuLinkTestEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuLinkTestFrameNum Exact number of measurement frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1
hpnicfOnuLinkTestFrameSize Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is dis…	Integer32r/w Constraints: range: 60-1514	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2
hpnicfOnuLinkTestDelay true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measu…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3
hpnicfOnuLinkTestVlanTag true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4
hpnicfOnuLinkTestVlanPriority VLAN priority: 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5
hpnicfOnuLinkTestVlanTagID VLAN ID: 1-4094.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6
hpnicfOnuLinkTestResultSentFrameNum The total number of frames sent during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7
hpnicfOnuLinkTestResultRetFrameNum The total number of frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8
hpnicfOnuLinkTestResultRetErrFrameNum The total number of error frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9
hpnicfOnuLinkTestResultMinDelay The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDel…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10
hpnicfOnuLinkTestResultMeanDelay The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDel…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11
hpnicfOnuLinkTestResultMaxDelay The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDel…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12

Set bandwidth policy parameters(restrictions)for a LLID
(only for the ONU).  Default policies are set to disable.
Policy parameters will be erased upon LLID network disconnection.

hpnicfOnuBandWidthEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1

The entry of table hpnicfOnuBandWidthTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuDownStreamBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1
hpnicfOnuDownStreamMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2
hpnicfOnuDownStreamMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3
hpnicfOnuDownStreamHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4
hpnicfOnuDownStreamShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5
hpnicfOnuP2PBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6
hpnicfOnuP2PMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7
hpnicfOnuP2PMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8
hpnicfOnuP2PHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9
hpnicfOnuP2PShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10

Two types of DBA algorithm are supported in the ONU.
The internal SLA based algorithm is always activated.
This table defines the primary parameter about the
internal SLA algorithm.

hpnicfOnuSlaManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1

The entry of table hpnicfOnuSlaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuSlaMaxBandWidth Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1
hpnicfOnuSlaMinBandWidth Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2
hpnicfOnuSlaBandWidthStepVal Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3
hpnicfOnuSlaDelay low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.	Enumerationr/w Enumerated Values: 1 low 2 high	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4
hpnicfOnuSlaFixedBandWidth Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5
hpnicfOnuSlaPriorityClass Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6
hpnicfOnuSlaFixedPacketSize Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7

Primary status of the specified ONU.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified ONU
(hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion,
hpnicfOnuUniMacType)
(2)Several physical capabilities of the ONU.
(hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime,
hpnicfOnuGrantFifoDep.)
(3)The operation(activation) status of the ONU.
(hpnicfOnuWorkMode)

hpnicfOnuInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1

The entry of the hpnicfOnuInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuHardMajorVersion ONU hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1
hpnicfOnuHardMinorVersion ONU hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2
hpnicfOnuSoftwareVersion ONU software version.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3
hpnicfOnuUniMacType ONU User Network Interface(UNI) port MAC type.	Enumeration Enumerated Values: 1 other 2 mii 3 gmii 4 tbi	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4
hpnicfOnuLaserOnTime The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5
hpnicfOnuLaserOffTime The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6
hpnicfOnuGrantFifoDep Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.	Integer32 Constraints: range: 1-255 range: 2147483647-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7
hpnicfOnuWorkMode The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registe…	Enumeration Enumerated Values: 1 other 2 on 3 pending 4 off	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8
hpnicfOnuPCBVersion ONU PCB version.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9
hpnicfOnuRtt The signal round-trip-time(RTT) received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10
hpnicfOnuEEPROMVersion ONU EEPROM version.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11
hpnicfOnuRegType ONU registered type.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12
hpnicfOnuHostType ONU host type.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13
hpnicfOnuDistance The distance between OLT and ONU, measured in meter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14
hpnicfOnuLlid The link layer identifier, which uniquely identifies the ONU of a specific OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15
hpnicfOnuVendorId ONU vendor ID.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16
hpnicfOnuFirmwareVersion ONU firmware version.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17
hpnicfOnuOpticalPowerReceivedByOlt The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18

This table used for getting MAC address information of ONU.

hpnicfOnuMacAddrInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1

The entry of the hpnicfEponOnuMacAddrInfoTable.

Indexes

IF-MIBifIndex hpnicfOnuMacIndex

Column	Syntax	OID
hpnicfOnuMacIndex The index of ONUs in one OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1
hpnicfOnuMacAddrFlag The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT…	Enumeration Enumerated Values: 1 bound 2 registered 3 run 4 regIncorrect	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2
hpnicfOnuMacAddress The MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3

This table implements the following functions for ONUs:
Bind MAC of ONU.

hpnicfOnuBindMacAddrEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1

The entry of the table hpnicfOnuBindMacAddrTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuBindMacAddress Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and c…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1
hpnicfOnuBindType Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2

This table implements the following functions for ONUs:
1. Update the ONU firmware.
2. Result of update ONU firmware.

hpnicfOnuFirmwareUpdateEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1

The entry of the table hpnicfOnuFirmwareUpdateTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuUpdate update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1
hpnicfOnuUpdateResult The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file doe…	Enumeration Enumerated Values: 1 updating 2 ok 3 fail 4 fileNotExist 5 notSetFilename 6 fileNotMatchONU 7 timeout 8 otherError	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2
hpnicfOnuUpdateFileName The filename of the ONU firmware to be updated. Note that the filename must contain the file path.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3

This table is used for getting ONU bind type in current version.

hpnicfEponOnuTypeManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1

The entry of the hpnicfEponOnuTypeManTable.

Indexes

hpnicfEponOnuTypeIndex

Column	Syntax	OID
hpnicfEponOnuTypeIndex The ONU type index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1
hpnicfEponOnuTypeDescr The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2

This table implements the following functions:
(1)Manage packet priority trust mode.
(2)Manage packet queue-scheduler mode.

hpnicfOnuPacketManEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1

The entry of the hpnicfOnuPacketManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuPriorityTrust The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.	Enumerationr/w Enumerated Values: 1 dscp 2 ipprecedence 3 cos	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1
hpnicfOnuQueueScheduler The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.	Enumerationr/w Enumerated Values: 1 spq 2 wfq	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2

This table implements the following functions:
(1)Manage STP status.
(2)Manage IGMP-snooping.
(3)Manage DHCP-snooping.

hpnicfOnuProtocolEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1

The entry of hpnicfOnuProtocolTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuStpStatus true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1
hpnicfOnuIgmpSnoopingStatus true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2
hpnicfOnuDhcpsnoopingOption82 true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3
hpnicfOnuDhcpsnooping true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4
hpnicfOnuPppoe true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5
hpnicfOnuIgmpSnoopingHostAgingT Set the host aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6
hpnicfOnuIgmpSnoopingMaxRespT Set the max response time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7
hpnicfOnuIgmpSnoopingRouterAgingT Set the router aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8
hpnicfOnuIgmpSnoopingAggReportS true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9
hpnicfOnuIgmpSnoopingAggLeaveS true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10

This table implements the following functions:
(1)Manage 802.1x account.
(2)Manage 802.1x password.
ONU will be authorized to send and receive frames when the
account and the password are all right, otherwise this ONU
will be unavailable.

hpnicfOnuDot1xEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1

The entry of the hpnicfOnuDot1xTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuDot1xAccount ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword.	OctetStringr/w	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1
hpnicfOnuDot1xPassword ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount.	OctetStringr/w	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2

This table contains specific information of priority queue.

hpnicfOnuPriorityQueueEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1

The entry of hpnicfOnuPriorityQueueTable.

Indexes

IF-MIBifIndex hpnicfOnuQueueDirection hpnicfOnuQueueId

Column	Syntax	OID
hpnicfOnuQueueDirection The direction of priority queue.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1
hpnicfOnuQueueId The queue ID of priority queue.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2
hpnicfOnuQueueSize The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed b…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3

This table contains statistics of ONU port.

hpnicfOnuCountEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1

The entry of hpnicfOnuCountTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuInCRCErrPkts The total number of frames received with bad CRC checksum.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1
hpnicfOnuOutDroppedFrames The total number of frames dropped because of buffer failure.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2

This table contains specific bandwidth information of ONU priority queue.

hpnicfOnuQueueBandwidthEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1

The entry of hpnicfOnuQueueBandwidthTable.

Indexes

IF-MIBifIndex hpnicfOnuQueueDirection hpnicfOnuQueueId

Column	Syntax	OID
hpnicfOnuQueueMaxBandwidth The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1
hpnicfOnuQueueMaxBurstsize The maximum burst size of specific ONU priority queue, measured in 64Bytes.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2
hpnicfOnuQueuePolicyStatus true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3

ONU IP address table.

hpnicfOnuIpAddressEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1

The entry of hpnicfOnuIpAddressTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuIpAddress The IP address assigned to the ONU.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1
hpnicfOnuIpAddressMask The mask of IP address denoted by hpnicfOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2
hpnicfOnuIpAddressGateway The gateway of IP address denoted by hpnicfOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3
hpnicfOnuDhcpallocate true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4
hpnicfOnuManageVID The management VLAN of ONU denoted by hpnicfOnuManageVID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5
hpnicfOnuManageVlanIntfS The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6

ONU vendor specific information of ONU.

hpnicfOnuChipSetInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1

The entry of hpnicfOnuChipSetInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuChipSetVendorId Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1
hpnicfOnuChipSetModel Chip model, numbering(range from 0 to 0xFF) by the chip vendor.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2
hpnicfOnuChipSetRevision Chip revision.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3
hpnicfOnuChipSetDesignDate Chip design date.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4

Capability of ONU.

hpnicfOnuCapabilityEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1

The entry of the table hpnicfOnuCapabilityTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuServiceSupported Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supp…	Bits Enumerated Values: 0 geinterfacesupport 1 feinterfacesupport 2 voipservicesupport 3 tdmservicesupport	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1
hpnicfOnuGEPortNumber The current gigabit ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2
hpnicfOnuFEPortNumber the current fast ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3
hpnicfOnuPOTSPortNumber The current POTS ports number supported by the ONU	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4
hpnicfOnuE1PortsNumber The current E1 ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5
hpnicfOnuUpstreamQueueNumber The number of upstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6
hpnicfOnuMaxUpstreamQueuePerPort The number of maximum upstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7
hpnicfOnuDownstreamQueueNumber The number of downstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8
hpnicfOnuMaxDownstreamQueuePerPort The number of maximum downstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9
hpnicfOnuBatteryBackup true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10
hpnicfOnuIgspFastLeaveSupported true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11
hpnicfOnuMCtrlFastLeaveSupported true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12

This table defines the information of DBA(dynamic bandwidth allocation)
report threshold contained in the MPCP report frames.

hpnicfOnuDbaReportEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1

The entry of the table hpnicfOnuDbaReportTable.

Indexes

IF-MIBifIndex hpnicfOnuDbaReportQueueId

Column	Syntax	OID
hpnicfOnuDbaReportQueueId The DBA report queue ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1
hpnicfOnuDbaReportThreshold The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2
hpnicfOnuDbaReportStatus enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3

Table of map of the COS to local-precedence.

hpnicfOnuCosToLocalPrecedenceEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1

Configuration information of map of the COS to local precedence.

Indexes

IF-MIBifIndex hpnicfOnuCosToLocalPrecedenceCosIndex

Column	Syntax	OID
hpnicfOnuCosToLocalPrecedenceCosIndex Index of the map, obtains from packet cos value.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1
hpnicfOnuCosToLocalPrecedenceValue Value of local precedence.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2

Table of ONU STP ports.

hpnicfEponOnuStpPortEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1

Configuration information of ONU STP ports.

Indexes

IF-MIBifIndex hpnicfEponStpPortIndex

Column	Syntax	OID
hpnicfEponStpPortIndex The index of the STP ports.	Integer32 Constraints: range: 0-144	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1
hpnicfEponStpPortDescr The description of the STP ports.	OctetString	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2
hpnicfEponStpPortState The current state of the port (i.e. disabled, discarding, learning and forwarding).	Enumeration Enumerated Values: 1 disabled 2 discarding 3 learning 4 forwarding	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3

This table is used for getting ONU physical information.

hpnicfOnuPhysicalEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1

The entry of the hpnicfOnuPhysicalTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfOnuBridgeMac The bridge MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1
hpnicfOnuFirstPonMac The MAC address of ONU first PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2
hpnicfOnuFirstPonRegState The register state of ONU first PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3
hpnicfOnuSecondPonMac The MAC address of ONU second PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4
hpnicfOnuSecondPonRegState The register state of ONU second PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5

This table is used for getting ONU SMLK information.

hpnicfOnuSmlkEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1

The entry of the hpnicfOnuSmlkTable.

Indexes

IF-MIBifIndex hpnicfOnuSmlkGroupID

Column	Syntax	OID
hpnicfOnuSmlkGroupID The SMLK group ID of ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1
hpnicfOnuSmlkFirstPonRole The role of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2
hpnicfOnuSmlkFirstPonStatus The transmitting status of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3
hpnicfOnuSmlkSecondPonRole The role of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4
hpnicfOnuSmlkSecondPonStatus The transmitting status of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5

Property table.

hpnicfOnuRS485PropertiesEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1

The entry of property table.

Indexes

IF-MIBifIndex hpnicfOnuRS485SerialIndex

Column	Syntax	OID
hpnicfOnuRS485SerialIndex The index of serial port.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1
hpnicfOnuRS485BaudRate The port baud rate.	Enumerationr/w Enumerated Values: 1 baudRate300 2 baudRate600 3 baudRate1200 4 baudRate2400 5 baudRate4800 6 baudRate9600 7 baudRate19200 8 baudRate38400 9 baudRate57600 10 baudRate115200	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2
hpnicfOnuRS485DataBits The port number of data bits in a character.	bitEnumerationr/w Enumerated Values: 1 five 2 six 3 seven 4 eight	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3
hpnicfOnuRS485Parity The port sense of a character parity bit.	Enumerationr/w Enumerated Values: 1 none 2 odd 3 even 4 mark 5 space	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4
hpnicfOnuRS485StopBits The port number of stop bits.	bitEnumerationr/w Enumerated Values: 1 one 2 two 3 oneAndHalf	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5
hpnicfOnuRS485FlowControl The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.	Enumerationr/w Enumerated Values: 1 none 2 hardware 3 xonOrxoff	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6
hpnicfOnuRS485TXOctets The number of output octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7
hpnicfOnuRS485RXOctets The number of input octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8
hpnicfOnuRS485TXErrOctets The number of output error octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9
hpnicfOnuRS485RXErrOctets The number of input error octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10
hpnicfOnuRS485ResetStatistics Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.	Enumerationr/w Enumerated Values: 1 counting 2 clear	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11

Session summary table.

hpnicfOnuRS485SessionSummaryEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1

The entry of session summary table.

Indexes

IF-MIBifIndex hpnicfOnuRS485SerialIndex

Column	Syntax	OID
hpnicfOnuRS485SessionMaxNum The max session number of every serial port which can be supported.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1
hpnicfOnuRS485SessionNextIndex The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2

RS485 raw session table.  Data received from RS485 will be sent
to the destination by raw sockets.

hpnicfOnuRS485SessionEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1

The entry of session table.

Indexes

IF-MIBifIndex hpnicfOnuRS485SerialIndex hpnicfOnuRS485SessionIndex

Column	Syntax	OID
hpnicfOnuRS485SessionIndex Raw session index.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1
hpnicfOnuRS485SessionType The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.	Enumerationr/w Enumerated Values: 1 udp 2 tcpClient 3 tcpServer	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2
hpnicfOnuRS485SessionAddType This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3
hpnicfOnuRS485SessionRemoteIP The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4
hpnicfOnuRS485SessionRemotePort The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5
hpnicfOnuRS485SessionLocalPort Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6
hpnicfOnuRS485SessionRowStatus The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7

Error information table.  When failed to create a session,
error information can be got from this table.

hpnicfOnuRS485SessionErrInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1

The entry of error information table.

Indexes

IF-MIBifIndex hpnicfOnuRS485SerialIndex hpnicfOnuRS485SessionIndex

Column	Syntax	OID
hpnicfOnuRS485SessionErrInfo Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1

This table is used for batch operation by slot.

hpnicfEponBatchOperationBySlotEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1

The entry of the hpnicfEponBatchOperationBySlotTable.

Indexes

hpnicfEponBatchOperationBySlotIndex

Column	Syntax	OID
hpnicfEponBatchOperationBySlotIndex The EPON board index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1
hpnicfEponBatchOperationBySlotType The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmwa…	Enumerationr/w Enumerated Values: 1 resetUnknown 9 updateDba 10 updateONU	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2
hpnicfEponBatchOperationBySlot Execute batch operation.	Enumerationr/w Enumerated Values: 1 batOpBySlot	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3
hpnicfEponBatchOperationBySlotResult The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because th…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4