HPICF-IPSLA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
10
Rows
10
Columns
190
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaTable'
This table specifies IP SLA test parameters as SLA entries.
hpicfIpSlaEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1
An entry on this table specifies the destination IP address/
Hostname, Source address, Source Interface ID & Row status
corresponding to each SLA test.
Indexes
Column Syntax OID
This is an identifier for the IP SLA.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.1
SLA Probe Type. IcmpEcho is similar to ping protocol and
the destination should be enabled with responder
functionality for udpEcho, udpJitter, udpJitterVoIP and
tcpConnect. For DHCP and DNS, destination device should b…
Enumerationr/w
Enumerated Values:
1icmpEcho
2udpEcho
3udpJitter
4udpJitterVoIP
5tcpConnect
6dhcp
7dns
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.2
Enable or disable the IP Service Level Agreement (SLA) probe.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.3
SLA source address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.4
SLA source address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.5
SLA source port to be used for SLA probes that use a
transport layer such as udpEcho, udpJitter, udpJitterVoIP
and tcpConnect. The allowed range is from 1024 to 65535.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.6
SLA source interface.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.7
SLA destination address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.8
SLA destination address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.9
Port on target device which responds back to the probe.
This is used for SLA probes that use a transport layer
such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect
SLA types. The allowed range is from 1024 to 65535.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.10
SLA row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.11
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaAttrTable'
This table specifies IP SLA test parameters as SLA
entries.
hpicfIpSlaAttrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1
An entry on this table specifies the attributes of SLA
test such as scheduling parameters, TOS, payload size,
history bucket size and inter packet interval,
corresponding to each SLA test.
Indexes
Column Syntax OID
Timestamp to denote when to start this SLA probe.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.1
Timestamp to denote when to end this SLA probe.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.2
Frequency in seconds. This value is used to send probes.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.3
Number of times this test will be repeated.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.4
Type of service value to be set for the probe packet.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.5
Number of history records to be maintained for SLA test.
Size can vary from 1 to 50.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.6
Size of the packet payload to be sent out for each probe.
It can be set from 0 to 1440 for udpEcho, icmpEcho and
from 68 to 8100 for udpJitter.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.7
Number of packets to be sent out for a single probe for
jitter SLA type.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.8
Inter packet interval in milli seconds. Which is to be
used for packets that are sent out for a single probe for
jitter SLA type.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.9
SLA attribute row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.10
Codec-type for the VoIP SLA test.
Enumerationr/w
Enumerated Values:
1g711a
2g711u
3g729a
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.11
Advantage factor to calculate the MOS and ICPIF values
for VoIP SLA type.
Unsigned32r/w
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.12
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaThrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaThrTable'
This table specifies IP SLA threshold-action parameters as
entries. When one of the monitored parameters of an SLA
test goes beyond the configured thresholds, notifications
are generated either as traps or syslog messages.
hpicfIpSlaThrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1
An entry on this table specifies the Metric type, upper
and lower limit of thresholds, threshold type and action
to be taken.
Column Syntax OID
SLA metric type to be monitored. The rtt type is the
round trip time of the probe packet. The jitter type is
the inter-packet delay variance. The srcTodstTime type is
the one-way trip time from source to destination. Th…
Enumeration
Enumerated Values:
1rtt
2jitter
3srcTodstTime
4dstTosrcTime
5mos
6icpif
7packetLoss
8testCompletion
9sdJitterPos
10dsJitterPos
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.1
Acceptable upper-limit of threshold value for SLA. This
value is not applicable when hpicfIpSlaThrMetricType
is set to packetLoss and testCompletion.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.2
Acceptable lower-limit of threshold value for SLA. This
value is not applicable when hpicfIpSlaThrMetricType
is set to packetLoss and testCompletion.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.3
Configure threshold type to trigger action. When a trap/log
has to be generated each time the threshold is breached,
immediate threshold type can be used. The Consecutive threshold
type generates traps/logs when the thr…
Enumerationr/w
Enumerated Values:
1immediate
2consecutive
3aggregated
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.4
The value for the number of consecutive times the upper or lower
limit of the threshold is violated. For example, this can be
configured to trigger a trap/log when the RTT is more than the
upper limit, x number of times…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.5
The number of probe packets used to calculate Round Trip Time
for jitter test.
Enumerationr/w
Enumerated Values:
0none
1trap
2log
3trapAndLog
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.6
Threshold table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.7
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaRespTable'
This table specifies IP SLA responder parameters as entries.
hpicfIpSlaRespEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1
An entry on this table specifies the local IP address,
port number and row status corresponding to each SLA
responder config.
Column Syntax OID
The SLA responder type. The udpEcho and tcpConnect objects
are for UDP and TCP packets, respectively. The udpJitter
and udpJitterVoIP values calculate one-way delay, therefore
a timestamp has to be embedded while replyi…
Enumeration
Enumerated Values:
1udpEcho
2udpJitter
3udpJitterVoIP
4tcpConnect
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.1
SLA responder IP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.2
The local IP address to which the responder is bound.
This is one of the indexes for the hpicfIpSlaRespTable.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.3
L4 port number on hpicfIpSlaRespAddress where the responder
listens for probe packets from SLA source. This is one of
the indexes for the hpicfIpSlaRespTable. The allowed range
is from 1024 to 65535.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.4
SLA responder row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.5
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5 · 1 row entry · 39 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaMsgTable'
This table specifies the IP SLA result parameters as entries.
hpicfIpSlaMsgEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1
An entry on this table specifies the probe received time,
probe error counters and threshold hit counter.
Indexes
Column Syntax OID
Last probe received time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.1
Last clear record done time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.2
Number of successful probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.3
Internal error count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.4
Number of probes failed due to local interface failure.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.5
Resolution timed out.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.6
Number of DNS format errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.7
Number of server failed errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.8
Number of domain does not exist errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.9
Number of function not implemented errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.10
Number of server refused errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.11
Number of name does not exist errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.12
Number of RRset that should not exist errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.13
Number of server not in the zone errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.14
Number of name not in the zone errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.15
Number of DHCP failed resolutions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.16
Number of DHCP offer not received errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.17
Number of NACKs received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.18
Number of round-trip time hits to threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.19
IP SLA current running status.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.20
Next scheduled time of IP SLA probe.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.21
The average positive jitter value of packets moving from
source to destination that cross the threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.22
The average positive jitter value of packets moving from
destination to source that cross the threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.23
The average time taken by packets moving from
destination to source that cross the threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.24
The average time taken by packets moving from
source to destination that cross the threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.25
Average value of the ICPIF of packets that cross
the threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.26
Average value of the MOS of packets that cross the threshold.
The Value of this object is 100 times of the actual value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.27
Number of errors due to name server being unreachable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.28
Number of DHCP release errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.29
Number of packet loss for each probe.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.30
Number of probes failed due to destination not
being reachable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.31
Number of probes skipped due to DNS resolution delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.32
Number of times DNS resolution failed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.33
Number of errors due to no route to target.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.34
Number of errors due to no host connectivity.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.35
Number of successful connections.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.36
Number of probes dropped due to resource unavailability.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.37
Number of errors due to no response from target.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.38
Number of probes received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.39
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6 · 1 row entry · 49 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaHistTable'
This table specifies the history of IP SLA result.
hpicfIpSlaHistEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1
An entry on this table specifies the minimum, maximum
and the average time taken from source to destination
and vice versa.
Indexes
Column Syntax OID
The minimum probe round-trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.1
The maximum probe round-trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.2
The average probe round-trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.3
The total probe round-trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.4
The sum of the squares of round-trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.5
The number of RTTs that are successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.6
Probe ID number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.7
Last success probe time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.8
The packet loss value during the jitter test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.9
Number of packets sent to responder.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.10
Number of packets received from responder.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.11
The minimal positive jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.12
The maximum positive jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.13
Number of times the source to destination jitter
has a positive value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.14
The sum of positive jitter values recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.15
The average positive jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.16
The sum of square of positive jitter values recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.17
The minimal positive jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.18
The maximum positive jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.19
The positive jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.20
The sum of positive jitter values recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.21
The average positive jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.22
The sum of square of positive jitter values recorded
from destination-to-source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.23
The minimal negative jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.24
The maximum negative jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.25
The number of negative jitter values recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.26
The sum of negative jitter values recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.27
The average negative jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.28
The sum of square of negative jitter values recorded
from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.29
The minimal negative jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.30
The maximum negative jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.31
The number of negative jitter values recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.32
The negative jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.33
The average negative jitter value recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.34
The negative jitter value recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.35
The minimum delay recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.36
The maximum delay recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.37
The sum of all delays recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.38
The number of delays from source to destination that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.39
The sum of squares of all delays recorded from
source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.40
The minimum delay recorded from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.41
The maximum delay recorded from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.42
The number of delays from destination to source that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.43
The sum of all delays recorded from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.44
The sum of squares of all delays recorded from
destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.45
The Calculated Planning Impairment Factor (ICPIF) value
for the type-specified test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.46
The Mean Opinion Score (MOS) value for the type-specified test.
The Value of this object is 100 times of the actual value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.47
The average one-way time from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.48
The average one-way time from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.49
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaHistSummTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaHistSummTable'
This table specifies the history summary of IP SLA result.
hpicfIpSlaHistSummEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1
An entry on this table specifies the minimum, maximum
and the average time taken from source to destination
and vice versa.
Column Syntax OID
This is an index for history summary. Its value can vary
from 1 to 50.
Integer32
Constraints:
range: 1-50
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.1
Time at which the type-specified test was executed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.2
The status of the IP SLA test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.3
The round-trip time for a successfully measured test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.4
Resolved IP address.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.5
Error description.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.6
Source to destination delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.7
Destination to source delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.8
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8 · 1 row entry · 49 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaHistAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaHistAggrTable'
This table specifies the aggregate value of IP SLA result.
The average value is calculating on last 25 probes.
Or the calculation will do on the number of probes
if the probe count is less than 25
hpicfIpSlaHistAggrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1
An entry on this table specifies aggregate value of minimum,
maximum and the average time taken from source to destination
and vice versa.
Indexes
Column Syntax OID
The minimum round-trip time for the last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.1
The maximum round-trip time for the last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.2
The number of RTTs that are successfully measured for
last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.3
The average round-trip time of last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.4
The total round-trip time of last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.5
The average of the sum of squares of RTTs for
the last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.6
First probe start time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.7
Probe failure reason.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.8
The percentage of packet loss in last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.9
The total number of packets sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.10
The total number of packets received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.11
The minimum positive jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.12
The maximum positive jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.13
The number of times source to destination jitter value
became positive.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.14
The average of the sum of positive jitter value from
source to destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.15
The average of the positive jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.16
The aggregate of square sum of positive jitter value
from source to destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.17
The minimum positive jitter value from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.18
The maximum positive jitter value from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.19
The number of times destination to source
jitter was positive.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.20
The sum of positive jitter value from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.21
The sum of average positive jitter values from
destination to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.22
The aggregate of square sum of positive jitter value
from destination to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.23
The minimum negative jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.24
The maximum negative jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.25
The number of times jitter value from source to
destination became negative.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.26
The sum of negative jitter value from source to
destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.27
The average of the negative jitter value from source
to destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.28
The aggregate of square sum of negative jitter value
from source to destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.29
The minimum negative jitter value from destination to
source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.30
The maximum negative jitter value from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.31
The number of times jitter value from destination
to source became negative.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.32
The sum of negative jitter value from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.33
The average of the negative jitter value from
destination to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.34
The aggregate of square sum of negative jitter value
from destination to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.35
The minimum one-way time from source to destination
for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.36
The maximum one-way time from source to destination
for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.37
The sum of one-way time from source to destination
for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.38
The number of times source to destination delay occurred
for the last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.39
The sum of squares of one-way delay from source
to destination for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.40
The minimum one-way delay from destination to source
for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.41
The maximum one-way delay from destination to source
for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.42
The number of times destination to source delay occurred
for the last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.43
The sum of one-way delay from destination to source for
last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.44
The sum of squares of one-way delay from destination
to source for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.45
The minimum ICPIF value for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.46
The maximum ICPIF value for last 25 probes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.47
The minimum MOS value for last 25 probes.
The Value of this object is 100 times of the actual value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.48
The maximum MOS value for last 25 probes.
The Value of this object is 100 times of the actual value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.49
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.9 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaRespResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaRespResultTable'
This table specifies the IP SLA responder result parameters as
entries.
hpicfIpSlaRespResultEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1
An entry on this table specifies responder status and
number of packets received and responded.
Column Syntax OID
The status of the responder.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.1
The number of packets received by the responder.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.2
The number of packets sent by the responder.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.3
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfIpSlaJitterRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPICF-IPSLA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPICF-IPSLA-MIB::hpicfIpSlaJitterRespTable'
This table specifies IP SLA jitter responder parameters
as entries.
hpicfIpSlaJitterRespEntry row .1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1
An entry on this table specifies the local IP address,
port number and row status corresponding to each SLA
responder config.
Column Syntax OID
The SLA jitter responder type. The udpJitter and
udpJitterVoIP values calculate one-way delay, therefore
a timestamp has to be embedded while replying back.
This is one of the indexes for hpicfIpSlaJitterRespTable.
Enumeration
Enumerated Values:
2udpJitter
3udpJitterVoIP
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.1
SLA jitter responder IP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.2
The local IP address to which the responder is bound.
This is one of the indexes for hpicfIpSlaJitterRespTable.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.3
L4 port number on hpicfIpSlaJitterRespAddress where the
responder listens for probe packets from SLA source.
This is one of the indexes for hpicfIpSlaJitterRespTable.
The allowed range is 1024 to 65535.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.4
SLA jitter responder source IP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.5
The source IP address to which the responder is responding.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.6
SLA jitter responder row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.7