HPE-UDP Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

rsUdpRelayTable

table
.1.3.6.1.4.1.11.2.42.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rsUdpRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-UDP' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-UDP::rsUdpRelayTable' 
This table contains the udp relay configuration per port.
rsUdpRelayEntry row .1.3.6.1.4.1.11.2.42.1.1
The row definition for this table.
Indexes
Column Syntax OID
rsUdpRelayDstPort
The UDP port number in the UDP message header.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.42.1.1.1
rsUdpRelaySrcIpInf
The source interface IP that receives UDP message.
255.255.255.255 from all IP interface.
0.0.0.0 - 0.255.255.255 and 127.0.0.0 - 127.255.255.255
not relevant addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.42.1.1.2
rsUdpRelayDstIpAddr
The destination IP address the UDP message will be forward.
0.0.0.0 does not forward, 255.255.255.255 broadcasts to all
addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.42.1.1.3
rsUdpRelayStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.42.1.1.4
rsUdpRelayUserInfo
The information used for implementation purposes
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.42.1.1.5

rlUdpSessionTable

table
.1.3.6.1.4.1.11.2.42.3 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlUdpSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-UDP' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-UDP::rlUdpSessionTable' 
This table contains the udp sessions information
rlUdpSessionEntry row .1.3.6.1.4.1.11.2.42.3.1
The row definition for this table.
Indexes
Column Syntax OID
rlUdpSessionLocalAddrType
The type of the rlUdpSessionLocalAddress address
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.42.3.1.1
rlUdpSessionLocalAddr
The UDP port session number.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.42.3.1.2
rlUdpSessionLocalPort
The UDP port local IP address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.42.3.1.3
rlUdpSessionAppInst
The instance ID for the application on the port (for future use).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.42.3.1.4
rlUdpSessionAppName
The name of the application that created the session.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.11.2.42.3.1.5