HPE-SPAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

rlSpanDestinationTable

table
.1.3.6.1.4.1.11.2.219.2 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlSpanDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-SPAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-SPAN-MIB::rlSpanDestinationTable' 
The table holds information for SPAN destination per session id.
rlSpanDestinationEntry row .1.3.6.1.4.1.11.2.219.2.1
Entry in the rlSpanDestinationTable.
Indexes
Column Syntax OID
rlSpanDestinationSessionId
SPAN session ID. This variable is the key for SPAN destination table.
Uniquely identifies the SPAN destination.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.219.2.1.1
rlSpanDestinationIfIndex
Interface Index. This variable identifies the destination ifIndex
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.219.2.1.2
rlSpanDestinationIsReflector
This variable indicates whether the current session is SPAN or RSPAN
start or final session.
SpanDestinationReflectorTyper/w
Type Values:
1span
2rspan-start
3rspan-final
 .1.3.6.1.4.1.11.2.219.2.1.3
rlSpanDestinationPortType
This variable indicates whether the destination port acts as network
port or analyzer only port.
SpanDestinationPortTyper/w
Type Values:
1monitor-only
2network
 .1.3.6.1.4.1.11.2.219.2.1.4
rlSpanDestinationRemoteVlanId
This variable indicated the remote vlan id for RSPAN case.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.219.2.1.5
rlSpanDestinationRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.219.2.1.6

rlSpanSourceTable

table
.1.3.6.1.4.1.11.2.219.3 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlSpanSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-SPAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-SPAN-MIB::rlSpanSourceTable' 
The table holds information for SPAN Source ports per session id.
rlSpanSourceEntry row .1.3.6.1.4.1.11.2.219.3.1
Entry in the rlSpanSourceTable.
Indexes
Column Syntax OID
rlSpanSourceSessionId
SPAN session ID. This variable is the key for SPAN source table.
Identifies the SPAN source.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.219.3.1.1
rlSpanSourceType
This variable indicates the SPAN source type.
SpanSourceType
Type Values:
1port
2vlan
3flow
4remote-vlan
 .1.3.6.1.4.1.11.2.219.3.1.2
rlSpanSourceIndex
This variable indicates the ifIndex of the SPAN source port
or the flow Id of the class map (for flow span source type).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.219.3.1.3
rlSpanSourceDirection
This variable indicates the source direction for monitoring.
SpanSourceDirectionr/w
Type Values:
1rx
2tx
3both
 .1.3.6.1.4.1.11.2.219.3.1.4
rlSpanSourceRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.219.3.1.5