HP-SWITCH-IMAGE-MIB
This MIB describes information like build
date, image version, build number, image size
for the images in the flash(non-volatile
memory). This mib will also give similar
details for running software version.
- Source file
HP-SWITCH-IMAGE-MIB- Last revised
- Identity
hpSwitchImage- Base OID
1.3.6.1.4.1.11.2.14.11.5.1.59
Imported Objects
| HP-ICF-OID | hpSwitch |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-SWITCH-IMAGE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-SWITCH-IMAGE-MIB::hpSwitchImage'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SWITCH-IMAGE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SWITCH-IMAGE-MIB::hpSwitchImage'
Objects (25)
Showing 25 of 25 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.11.2.14.11.5.1.59 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.1 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.1 |
|
|
BytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.2 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.2 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.7 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.9 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.59.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- HP-ICF-OIDhp
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- HP-SWITCH-IMAGE-MIBhpselected
Conformance Groups (3)
|
hpSwitchFlashImageSize hpSwitchFlashImageBuildDate hpSwitchFlashImageVersion hpSwitchBootRomVersion hpSwitchDefaultBoot
A mandatory group which is required to
give the details like image size, image build date, image version, default boot image for the images in the flash. This also gives version of monitor rom console. |
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.1
|
|
|
hpSwitchMgmtModuleStatus hpSwitchMgmtModuleDirectory hpSwitchMgmtModuleDate hpSwitchMgmtModuleVersion hpSwitchMgmtModuleBootImage
A mandatory group which is required to
give the details like status, boot directory-path, image build date, image version and boot-image of the running software version for the management modules. |
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.2
|
|
|
hpSwitchMgmtModuleBuildNumber hpSwitchFlashImageBuildNumber hpSwitchMgmtModuleBuildOptions hpSwitchMgmtModuleWatchDog
This optional group is accessible only
in debug build. |
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.3
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.2.1The compliance statement is for
hpSwitchFlashImagesGroup,
hpSwitchMgmtModuleGroup and
hpSwitchBuildGroup.
hpSwitchFlashImagesGroup,
hpSwitchMgmtModuleGroup and
hpSwitchBuildGroup.
Required groups
| mandatory | hpSwitchFlashImagesGroup | |
| mandatory | hpSwitchMgmtModuleGroup | |
| optional | hpSwitchBuildGroup |
hpSwitchBuildGroup is an optional group which is accessible only in debug build. |