HP-SWITCH-FIPS-MIB Table View

This table is used to configure the list of FC-MAP values.
These FC-MAPS will be used to program ACLs that ensure
no MAC Address used for non-FCoE traffic shall have the
prefix(first 3 bytes) equal to any of the FC-MAP
value.

hpSwitchFipsFcMapEntry row .1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1

An entry in the table specifying the FC-MAP.

Indexes

hpSwitchFipsFcMapIndex

Column	Syntax	OID
hpSwitchFipsFcMapIndex The index of the Fiber Channel MAC Address prefix table.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1.1
hpSwitchFipsFcMap This object configures the FC MAP value associated with the FIP snooping bridge	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1.2

This table is used to configure the list of FCF MAC
addresses to which ENodes will perform FIP FLOGI and
FIP NPIV FDISC operations. This table will be indexed
by the VLAN ID. Appropriate ACL entries will be programmed
to allow FCoE traffic to these MACs.

hpSwitchFipsFcfMacAddressEntry row .1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1

An entry in the table specifying the FCF MAC connected to
the Virtual Fabric (VF) interface.

Indexes

hpSwitchFipsVirtualFabricInterfaceIndex hpSwitchFipsFcfMacAddress

Column	Syntax	OID
hpSwitchFipsVirtualFabricInterfaceIndex Interface index of the VF port connected to FCF	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.1
hpSwitchFipsFcfMacAddress This object configures the MAC address of the Fibre Channel Forwarder(FCF) attached to the VF port accepting Fabric logins. This MAC Address will be used as the DA MAC by Enodes requesting FLOGI or NPIV FDISC.Configurin…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.2
hpSwitchFipsFcoeVlanId The FCoE VLAN ID advertised by FCF	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.3
hpSwitchFipsFcfFcMap The Fiber Channel MAC address prefix used by the FCF to assign fabric provided MAC addresses(FPMA).	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.4
hpSwitchFipsFcfEnodeLoginCount This objects represents the number of Enodes that have logged into this FCF.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.5
hpSwitchFipsFcfNameId The World Wide Node Name of the fabric port as advertised by the FCF.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.6
hpSwitchFipsFabricName The Fabric name identifier of Fabric as advertised by FCF.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.7
hpSwitchFipsFcfMacTableRowStatus Row Status of the FCF MAC Address table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.8

This table stores the currently active FLOGI or NPIV FDISC
sessions. This table is meant for reporting only.

hpSwitchFipsSessionEntry row .1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1

An entry in the table specifying the details pertaing to a
session.

Indexes

hpSwitchFipsSessEnodeInterfaceIndex hpSwitchFipsSessEnodeFPMAMacAddress

Column	Syntax	OID
hpSwitchFipsSessEnodeInterfaceIndex The object specifies the interface index connected to the Enode initiator.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.1
hpSwitchFipsSessEnodeFPMAMacAddress The Fabric provided MAC Address of the Enode. This MAC is assigned by FCF as a result of succcessful FLOGI or NPIV FDISC and is used as the SA MAC for FCoE traffic originating from Enode.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.2
hpSwitchFipsSessEnodeMacAddress This object represents the server provided MAC address of the Enode. This MAC is used as the SA MAC in FIP frames originating from Enode.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.3
hpSwitchFipsSessEnodeNportId This object represents the N_Port ID of the Enode. It is assigned by the FCF after a successful FLOGI or NPIV FDISC. It is equivalent to FC ID in native Fibre channel. This ID is used in the S_ID or D_ID fields of the e…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.4
hpSwitchFipsSessEnodeNportIdType This object represents the method by which N_Port obtained the FC ID from FCF.	Enumeration Enumerated Values: 1 flogi 2 npivfdisc	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.5
hpSwitchFipsSessFcfMacAddress This object represents the MAC Address of the Fibre Channel Forwarder to which the session is established.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.6
hpSwitchFipsSessFcMap This object represents the FC MAP.	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.7
hpSwitchFipsSessVlanId The VLAN ID on which FCoE traffic is being pumped.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.8
hpSwitchFipsSessFcfNameId The Name Identifier advertised by the FCF with which this session is established.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.9

A table for per session FIPs statistics.

hpSwitchFipsSessStatsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1

An Entry in the session statistics table.

Indexes

hpSwitchFipsStatsSessEnodeIfIndex hpSwitchFipsStatsSessFPMAMacAddress

Column	Syntax	OID
hpSwitchFipsStatsSessEnodeIfIndex Interface index of the Enode.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.1
hpSwitchFipsStatsSessFPMAMacAddress FPMA Mac address being used for this session.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.2
hpSwitchFipsStatsSessFcfMacAddress FCF Mac address being used for this session.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.3
hpSwitchFipsStatsSessFcoePermitPkts Counter indicating the number of FCoE frames permitted for this session.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.4