HP-SN-IPX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
62

snIpxCacheTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxCacheTable' 
IPX Cache table.
snIpxCacheEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1
An entry in the IPX Cache table.
Indexes
Column Syntax OID
snIpxCacheIndexmandatory
The table index for a IPX Cache entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1
snIpxCacheNetNummandatory
Cache Network number.
NetNumber
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2
snIpxCacheNodemandatory
Cache Node Number.
PhysAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3
snIpxCacheOutFiltermandatory
Cache Outbound Filter is ether disabled(0) or enabled(1).
RtrStatus
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4
snIpxCacheEncapmandatory
The IPX encapsulation frame type.
Enumeration
Enumerated Values:
1ethernetII
2ethernet8022
3ethernet8023
4ethernetSnap
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5
snIpxCachePortmandatory
IPX Router Port number.
PortIndex
Type Constraints:
range: 1..3900
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6

snIpxRouteTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxRouteTable' 
IPX route table.
snIpxRouteEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1
An entry in the IPX route table.
Indexes
Column Syntax OID
snIpxRouteIndexmandatory
The table index for a IPX route entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1
snIpxDestNetNummandatory
Destination Network number.
NetNumber
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2
snIpxFwdRouterNodemandatory
Forward Router Node Number.
PhysAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3
snIpxDestHopCntsmandatory
Number of hops to reach the
destination.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4
snIpxRouteMetricmandatory
The metrics to next hop router.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5
snIpxDestPortmandatory
The destination port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6

snIpxServerTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxServerTable' 
IPX Server table.
snIpxServerEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1
An entry in the IPX Server table.
Indexes
Column Syntax OID
snIpxServerIndexmandatory
The table index for a IPX Server entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1
snIpxServerTypemandatory
IPX Server Type.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2
snIpxServerNetNummandatory
Server Network number.
NetNumber
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3
snIpxServerNodemandatory
Server Node Number.
PhysAddress .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4
snIpxServerSocketmandatory
Server Socket Number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5
snIpxServerHopCntsmandatory
Number of intervening networks to reach the
server.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6
snIpxServerNamemandatory
IPX Server Name.
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7

snIpxFwdFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxFwdFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxFwdFilterTable' 
IPX Forward Filter table.
snIpxFwdFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1
An entry in the IPX Forward Filter table.
Indexes
Column Syntax OID
snIpxFwdFilterIdxmandatory
The filter ID for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1
snIpxFwdFilterActionmandatory
Action to take if the ipx packet match
with this filter.
Actionr/w
Type Values:
0deny
1permit
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2
snIpxFwdFilterSocketmandatory
IPX Forward Filter Socket Number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3
snIpxFwdFilterSrcNetmandatory
Source Network Number.
NetNumberr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4
snIpxFwdFilterSrcNodemandatory
Source Node Number.
PhysAddressr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5
snIpxFwdFilterDestNetmandatory
Destination Network Number.
NetNumberr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6
snIpxFwdFilterDestNodemandatory
Destination Node Number.
PhysAddressr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7
snIpxFwdFilterRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8

snIpxRipFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxRipFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxRipFilterTable' 
IPX RIP Filter table.
snIpxRipFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1
An entry in the IPX RIP Filter table.
Indexes
Column Syntax OID
snIpxRipFilterIdmandatory
The filter ID for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1
snIpxRipFilterActionmandatory
Action to take if the ipx packet match
with this filter.
Actionr/w
Type Values:
0deny
1permit
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2
snIpxRipFilterNetmandatory
IPX RIP Filter Network number.
NetNumberr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3
snIpxRipFilterMaskmandatory
IPX RIP Filter Network/Subnet Mask.
NetNumberr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4
snIpxRipFilterRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5

snIpxSapFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxSapFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxSapFilterTable' 
IPX SAP Filter table.
snIpxSapFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1
An entry in the IPX SAP Filter table.
Indexes
Column Syntax OID
snIpxSapFilterIdmandatory
The filter ID for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1
snIpxSapFilterActionmandatory
Action to take if the ipx packet match
with this filter.
Actionr/w
Type Values:
0deny
1permit
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2
snIpxSapFilterTypemandatory
IPX SAP Filter type to be matched.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3
snIpxSapFilterNamemandatory
IPX SAP Filter Name.
OctetStringr/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4
snIpxSapFilterRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5

snIpxIfFwdAccessTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxIfFwdAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxIfFwdAccessTable' 
IPX IF Forward Access table.
snIpxIfFwdAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1
An entry in the IPX Forward Access table.
Indexes
Column Syntax OID
snIpxIfFwdAccessPortmandatory
The IPX interface to which the Forward Filter applies.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1
snIpxIfFwdAccessDirmandatory
The access direction of incoming packet filter
or outgoing packet filter.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2
snIpxIfFwdAccessFilterListmandatory
An IPX IF Forward Filter List.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3
snIpxIfFwdAccessRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4

snIpxIfRipAccessTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxIfRipAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxIfRipAccessTable' 
IPX IF RIP Access table.
snIpxIfRipAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1
An entry in the IPX Forward Access table.
Indexes
Column Syntax OID
snIpxIfRipAccessPortmandatory
The IPX interface to which the RIP Filter applies.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1
snIpxIfRipAccessDirmandatory
The access direction of incoming packet filter
or outgoing packet filter.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2
snIpxIfRipAccessFilterListmandatory
An IPX IF RIP Access Filter List.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3
snIpxIfRipAccessRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4

snIpxIfSapAccessTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxIfSapAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxIfSapAccessTable' 
IPX IF RIP Access table.
snIpxIfSapAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1
An entry in the IPX Forward Access table.
Indexes
Column Syntax OID
snIpxIfSapAccessPortmandatory
The IPX interface to which the SAP Filter applies.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1
snIpxIfSapAccessDirmandatory
The access direction of incoming packet filter
or outgoing packet filter.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2
snIpxIfSapAccessFilterListmandatory
An IPX IF SAP Access Filter List.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3
snIpxIfSapAccessRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4

snIpxPortAddrTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxPortAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxPortAddrTable' 
IPX port address table.
snIpxPortAddrEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1
An entry in the IPX Port Address table.
Indexes
Column Syntax OID
snIpxPortAddrPortmandatory
The port index for port address entry.
PortIndex
Type Constraints:
range: 1..3900
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1
snIpxPortAddrEncapmandatory
The IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned.
Enumeration
Enumerated Values:
1ethernet8022
2ethernet8023
3ethernetII
4ethernetSnap
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2
snIpxPortAddrNetNummandatory
An unique Network number for the IPX interface port.
NetNumberr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3
snIpxPortAddrRowStatusmandatory
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4
snIpxPortAddrNetBiosFilterModemandatory
Enabled/Disabled NetBios Filter Mode status per Port Address entry.
RtrStatusr/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5

snIpxPortCountersTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpxPortCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IPX-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IPX-MIB::snIpxPortCountersTable' 
IPX port Counters table.
snIpxPortCountersEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1
An entry in the IPX Port Counters table.
Indexes
Column Syntax OID
snIpxPortCountersPortmandatory
The port index for port Counters entry.
PortIndex
Type Constraints:
range: 1..3900
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1
snIpxPortCountersRcvPktsCntmandatory
IPX incoming packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2
snIpxPortCountersTxPktsCntmandatory
IPX Outgoing packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3
snIpxPortCountersFwdPktsCntmandatory
IPX forwarding packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4
snIpxPortCountersRcvDropPktsCntmandatory
IPX receiving drop packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5
snIpxPortCountersTxDropPktsCntmandatory
IPX transmitting drop packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6
snIpxPortCountersRcvFiltPktsCntmandatory
IPX receiving filter packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7
snIpxPortCountersTxFiltPktsCntmandatory
IPX transmitting filter packets counter for the interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8