HP-SN-IP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
39
Rows
39
Columns
258

snRtIpStaticRouteTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpStaticRouteTable'
IP static/default route table.
snRtIpStaticRouteEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1
An entry in the IP static route table.
Column Syntax OID
The table index for a static route entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1
Destination IP address.
0.0.0.0 for default route.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2
Subnet mask associated with
the destination IP address.
0.0.0.0 for default route mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3
IP address of next hop router that
is located on one of the directly
attached IP subnet.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4
The metrics to next hop router.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5
To create or delete a static route
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6
Administration distance.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7

snRtIpFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpFilterTable'
IP filter table.
snRtIpFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1
An entry in the IP filter table.
Column Syntax OID
The table index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1
Action to take if the ip packet match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
2qosEnabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2
Transport protocol. 0 means don't care
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3
Source IP address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4
Source IP subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5
Destination IP address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6
Destination IP subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7
Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number
Enumerationr/w
Enumerated Values:
1greater
2equal
3less
4notEqual
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8
For now this only refers to transport
protocol port number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9
To create or delete a filter
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10
Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11
The router L4 Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7)
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12

snRtIpRarpTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRarpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRarpTable'
IP RARP table.
snRtIpRarpEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1
An entry in the IP Rarp table.
Indexes
Column Syntax OID
The table index for a Rarp entry.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1
snRtIpRarpMacmandatory
The Mac address for a Rarp entry.
OctetStringr/w
Constraints:
range: 6-6
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2
snRtIpRarpIpmandatory
The IP address for a Rarp entry.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3
To create or delete a Rarp
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4

snRtStaticArpTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtStaticArpTable'
IP static arp table.
snRtStaticArpEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1
An entry in the IP static arp table.
Column Syntax OID
The table index for a static arp entry.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1
The IP address for a static arp entry.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2
The Mac address for a static arp entry.
OctetStringr/w
Constraints:
range: 6-6
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3
The port index for a static arp entry.
PortIndexr/w
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4
To create or delete a Static Arp
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5

snRtIpPortAddrTable

table obsolete
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortAddrTable'
IP port address table.
snRtIpPortAddrEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1
An entry in the IP Port Address table.
Column Syntax OID
The port index for port address entry.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1
The port IP address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2
The port IP address subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3
The port IP address type.
Enumerationr/w
Enumerated Values:
1primary
2secondary
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4
To create or delete a port address
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5

snRtIpPortAccessTable

table obsolete
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortAccessTable'
IP port access table.
snRtIpPortAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1
An entry in the IP Port access table.
Column Syntax OID
The port index for port access entry.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1
The incoming or outgoing check
for port access.
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2
1st octet correspond to 1st filter
number and so on.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3
To create or delete a port access
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4

snRtIpPortConfigTable

table obsolete
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortConfigTable'
IP port Config table.
snRtIpPortConfigEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1
An entry in the IP Port Config table.
Column Syntax OID
The port index for port config entry.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1
The maximun transfer unit.
Integer32r/w
Constraints:
range: 576-4470
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2
Data link encapsulation to be used
on the IP frame transmitted on the
port.
Enumerationr/w
Enumerated Values:
1ethernet
2snap
3hdlc
4ppp
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3
The metric.
Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4
Enable/Disable directed broadcast forwarding on the port.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5

snRtUdpBcastFwdPortTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtUdpBcastFwdPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtUdpBcastFwdPortTable'
This table contains a list of UDP port numbers
for which forwarding UDP broadcast is enabled.
snRtUdpBcastFwdPortEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1
An entry of the UDP broadcast forwarding
port table.
Column Syntax OID
The table index for a UDP broadcast forwarding
port entry.
Integer32
Constraints:
range: 1-20
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1
UDP port number for which UDP broadcast forwarding
is enabled.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2
To create or delete a UDP broadcast forwarding
port entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3

snRtUdpHelperTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtUdpHelperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtUdpHelperTable'
UDP helper table.
snRtUdpHelperEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1
An entry of the UDP helper table.
Column Syntax OID
The port index for a UDP helper entry.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1
The table index for a UDP helper entry.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2
The UDP helper address. This is the address that
UDP packets will be forwarded. It can be a helper
address or a subnet broadcast address. But it
cannot be 255.255.255.255 or 0.0.0.0.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3
To create or delete a UDP helper entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4

snRtIpTraceRouteResultTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpTraceRouteResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpTraceRouteResultTable'
Trace route result table.
snRtIpTraceRouteResultEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1
An entry of the trace route result table.
Column Syntax OID
The table index for a trace route result entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1
The router or the target address of which forms
part of the route to reach the destination address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2
The round trip time between the first probe packet
transmitted and the reponse ICMP packet received.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3
The round trip time between the second probe packet
transmitted and the reponse ICMP packet received.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4

snRtIpFwdCacheTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpFwdCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpFwdCacheTable'
IP forwarding cache table.
snRtIpFwdCacheEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1
An entry in the IP forwarding cache table.
Column Syntax OID
The table index for a ip forwarding cache table entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1
The IP address of a station.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2
The Mac address of an IP station.
OctetString
Constraints:
range: 6-6
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3
The next hop router IP address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4
The outgoing port of which packets will forward to.
Return port value of zero to indicate no outgoing port
associated to this entry. Non-zero value has the
following meanings:
The bit 0 to bit 7: port number.
The bit 8 …
Integer32
Constraints:
range: 0-3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5
The 'dynamic' or 'permanent' type for a ip forwarding
cache table entry.
Enumeration
Enumerated Values:
1dynamic
2permanent
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6
The action to take.
Enumeration
Enumerated Values:
1other
2forward
3forUs
4waitForArp
5complexFilter
6icmpDeny
7dropPacket
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7
Check for fragmentation.
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8
Apply SNAP encapsulation.
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9
The VLAN ID for a ip forwarding cache table entry.
Return VLAN ID value of zero to indicate no VLAN
associated to this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10

snIpAsPathAccessListTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpAsPathAccessListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snIpAsPathAccessListTable'
Ip As-Path Access List table.
snIpAsPathAccessListEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1
An entry in the Ip As-Path Access List table.
Column Syntax OID
The table index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.1
The table sequence index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.2
Action to take if the bgp address match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.3
Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet.
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.4
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.5

snIpCommunityListTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpCommunityListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snIpCommunityListTable'
Ip Community List table.
snIpCommunityListEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1
An entry in the Ip Community List table.
Column Syntax OID
The table index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.1
The table sequence index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.2
Action to take if the bgp address match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.3
A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.4
Disabled/Enabled the Internet Community.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.5
Do not advertise this route to any peer (internal or external).
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.6
Do not advertise this route to an EBGP peer.
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.7
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.8
Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system.
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.9

snIpPrefixListTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpPrefixListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snIpPrefixListTable'
Ip Prefix List table.
snIpPrefixListEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1
An entry in the Ip As-Path Access List table.
Column Syntax OID
An octet string of the ip prefix list name, each character of the name
is represented by one octet.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.1
The table sequence index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.2
An octet string of the ip prefix list description, each character of the name
is represented by one octet.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.3
Action to take if the ip prefix match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.4
Prefix IP address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.5
Prefix IP mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.6
Greater than value.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.7
Less than value.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.8
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.9
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpAsPathAccessListStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snIpAsPathAccessListStringTable'
Ip As-Path Access List table, string version.
snIpAsPathAccessListStringEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1
An entry in the Ip As-Path Access List table.
Column Syntax OID
The table index for a filter entry, string version.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.1
The table sequence index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.2
Action to take if the bgp address match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.3
Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet.
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.4
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.5
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snIpCommunityListStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snIpCommunityListStringTable'
Ip Community ListString table, string version.
snIpCommunityListStringEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1
An entry in the Ip Community ListString table.
Column Syntax OID
The table index for a filter entry.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.1
The table sequence index for a filter entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.2
Action to take if the bgp address match
with this filter.
Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.3
A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.4
Disabled/Enabled the Internet Community.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.5
Do not advertise this route to any peer (internal or external).
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.6
Do not advertise this route to an EBGP peer.
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.7
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.8
Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system.
Enumerationr/w
Enumerated Values:
0false
1true
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.9

snRtIpPortIfAddrTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortIfAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortIfAddrTable'
IP port If address table.
snRtIpPortIfAddrEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1
An entry in the IP Port Address table.
Column Syntax OID
The InterfaceIndex for port address entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.1
The port IP address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.2
The port IP address subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.3
The port IP address type.
Enumerationr/w
Enumerated Values:
1primary
2secondary
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.4
To create or delete a port address
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.5

snRtIpPortIfAccessTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortIfAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortIfAccessTable'
IP port If access table.
snRtIpPortIfAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1
An entry in the IP Port access table.
Column Syntax OID
The InterfaceIndex for port access entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.1
The incoming or outgoing check
for port access.
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.2
1st octet correspond to 1st filter
number and so on.
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.3
To create or delete a port access
entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.4

snRtIpPortIfConfigTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpPortIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpPortIfConfigTable'
IP port If Config table.
snRtIpPortIfConfigEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1
An entry in the IP Port Config table.
Column Syntax OID
The If index for port config entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.1
The maximun transfer unit.
Integer32r/w
Constraints:
range: 576-4470
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.2
Data link encapsulation to be used
on the IP frame transmitted on the
port.
Enumerationr/w
Enumerated Values:
1ethernet
2snap
3hdlc
4ppp
5other
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.3
The metric.
Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.4
Enable/Disable directed broadcast forwarding on the port.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.5

snRtIpRipPortConfigTable

table obsolete
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipPortConfigTable'
IP Rip port Config table.
snRtIpRipPortConfigEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1
An entry in the IP Rip Port Config table.
Column Syntax OID
The port index for ip rip port config entry.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1
The ip rip version on this port.
Enumerationr/w
Enumerated Values:
0disabled
1v1Only
2v2Only
3v1CompatibleV2
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2
Enable/disable poison reverse.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3
Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4

snRtIpRipRedisTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipRedisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipRedisTable'
IP Rip Redistribution table.
snRtIpRipRedisEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1
An entry in the IP Rip Redistribution table.
Column Syntax OID
The table index for a IP Rip Redistribution entry.
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1
The action to take when match this
IP Rip Redistribution entry.
Actionr/w
Type Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2
The protocol to be distributed. other(1) cannot be
used for SNMP-SET.
Enumerationr/w
Enumerated Values:
1other
2all
3static
4ospf
5bgp
6isis
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3
The ip address of the ip route to be distributed.
0.0.0.0 - all routes
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4
The ip subnet mask of the ip route to be distributed.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5
The metric of the route to be matched
to determine the redistribution.
0 - any metric value
Metricr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6
The new metric of the route to be advertised.
0 - use the default metric.
Integer32r/w
Constraints:
range: 0-15
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7
To create or delete a Redistribution entry.
RowStsr/w
Type Values:
1other
2valid
3delete
4create
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8

snRtIpRipRouteFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipRouteFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipRouteFilterTable'
ip rip route filter table.
snRtIpRipRouteFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1
An entry of the ip rip route filter table.
Column Syntax OID
The filter ID to identify a filter entry.
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1
Action to take if the ip rip packet matched
with this filter.
Actionr/w
Type Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2
Route IP address to compare with any route IP addresses
in a ip rip packet. IP address 0.0.0.0 always compare
equals to any route IP addresses in any ip rip packets.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3
Subnet mask to apply to the route IP address in a ip rip
packet, the result is compared to snRtIpRipRouteFilterIpAddr.
If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask
value is ignored.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5

snRtIpRipNbrFilterTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipNbrFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipNbrFilterTable'
ip rip neighbor filter table.
snRtIpRipNbrFilterEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1
An entry of the ip rip neighbor filter table.
Column Syntax OID
The filter ID to identify a filter entry.
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1
Action to take if the ip rip packet source IP
address compares equal to the source IP address
in this filter.
Actionr/w
Type Values:
0deny
1permit
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2
Source IP address to compare with the source IP
address in a ip rip packet. IP address 0.0.0.0
always compares equal to any source IP addresses
in any ip rip packets.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4

snRtIpRipPortAccessTable

table obsolete
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipPortAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipPortAccessTable'
ip interface rip access table.
snRtIpRipPortAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1
An entry of the ip interface rip access table.
Column Syntax OID
The ip interface to which the rip filter applies.
PortIndex
Type Constraints:
range: 1..3900
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1
The access direction of incoming packet filter
or outgoing packet filter.
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2
An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4

snRtIpRipPortIfConfigTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipPortIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipPortIfConfigTable'
IP Rip port If Config table.
snRtIpRipPortIfConfigEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1
An entry in the IP Rip Port If Config table.
Column Syntax OID
The If index for ip rip port config entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.1
The ip rip version on this port.
Enumerationr/w
Enumerated Values:
0disabled
1v1Only
2v2Only
3v1CompatibleV2
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.2
Enable/disable poison reverse.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.3
Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.4

snRtIpRipPortIfAccessTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snRtIpRipPortIfAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snRtIpRipPortIfAccessTable'
ip interface rip access table.
snRtIpRipPortIfAccessEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1
An entry of the ip interface rip access table.
Column Syntax OID
The ip interface to which the rip filter applies.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.1
The access direction of incoming packet filter
or outgoing packet filter.
Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.2
An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.3
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.4

snDvmrpVInterfaceTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snDvmrpVInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snDvmrpVInterfaceTable'
The (conceptual) table listing the router's DVMRP virtual
interfaces. snDvmrpEnable must be 'enabled' before this
table is read or writen.
snDvmrpVInterfaceEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1
An entry (conceptual row) in the snDvmrpVInterfaceTable.
This row augments ipMRouteInterfaceEntry in the IP
Multicast MIB, where the threshold object resides.
Column Syntax OID
The ifIndex value of this DVMRP virtual interface.
Integer32
Constraints:
range: 1-48
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1
The type of this DVMRP virtual interface, whether it uses
a tunnel, a physical interface for which we are a querier,
or a physical interface for which we are not a querier.
For write operation, this object can only ac…
Enumerationr/w
Enumerated Values:
1tunnel
2querier
3subnet
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2
The current operational state of this DVMRP virtual
interface.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3
The IP address of the local end of this DVMRP virtual
interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4
The IP address of the remote end of this DVMRP virtual
interface. For a tunnel, this is the IP address of the
neighboring router. For a subnet, this is the subnet
address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5
The subnet mask for a directly connected subnet. For
a tunnel, this should be 0.0.0.0.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6
The distance metric for this DVMRP virtual interface which
is used to calculate distance vectors.
Integer32r/w
Constraints:
range: 1-31
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7
This is the minimum time-to-live value to forward the packets
out of this virtual interface.
Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8
Enable or disable the advertising of this local route.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9
Enable or disable the encapsulation of the DVMRP control
packets when using IPINIP encapsulation.
RtrStatusr/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting r…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11

snDvmrpNeighborTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snDvmrpNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snDvmrpNeighborTable'
The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving Neighbor Probe
messages. snDvmrpEnable must be 'enabled' before this
table is read.
snDvmrpNeighborEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1
An entry (conceptual row) in the snDvmrpNeighborTable.
Column Syntax OID
The table entry index.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1
The value of VifIndex for the virtual interface used to
reach this DVMRP neighbor.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2
The IP address of the DVMRP neighbor for which this entry
contains information.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3
The time since this DVMRP neighbor (last) became a neighbor
of the local router.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4
The minimum time remaining before this DVMRP neighbor will
be aged out.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5
The neighboring router's generation identifier.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6
The neighboring router's major DVMRP version number.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7
The neighboring router's minor DVMRP version number.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8
This object describes the neighboring router's
capabilities. The following shows the position
of each bit:

bit position meaning
----------- ------
3 mtrace bit
2 generationID b…
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9

snDvmrpRouteTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snDvmrpRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snDvmrpRouteTable'
The routing table used by DVMRP in place of the unicast
routing table. snDvmrpEnable must be 'enabled' before this
table is read.
snDvmrpRouteEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1
An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of the unicast routing
information.
Column Syntax OID
The table entry index.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1
The network address which when combined with the
corresponding value of snDvmrpRouteSourceMask identifies the
sources for which this entry contains multicast routing
information.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2
The network mask which when combined with the corresponding
value of snDvmrpRouteSource identifies the sources for which
this entry contains multicast routing information.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3
The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources are received.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4
The value of snDvmrpVInterfaceVifIndex for the virtual
interface on which IP datagrams sent by these sources are
received.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5
The distance in hops to the source subnet.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6
The minimum amount of time remaining before this entry will
be aged out.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7

snDvmrpRouteNextHopTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snDvmrpRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snDvmrpRouteNextHopTable'
The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams. snDvmrpEnable must be 'enabled' before this
table is read.
snDvmrpRouteNextHopEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1
An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed.
Column Syntax OID
The network address which when combined with the
corresponding value of snDvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies
a next hop on an outgoing interface.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1
The network mask which when combined with the corresponding
value of snDvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2
The snDvmrpVInterfaceVifIndex value of the virtual interface
for the outgoing interface for this next hop.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3
Type is leaf if no neighbors exist on the outgoing virtual
interface. Otherwise, type is branch.
Enumeration
Enumerated Values:
1leaf
2branch
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4

snDvmrpVIfStatTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17 · 1 row entry · 20 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snDvmrpVIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snDvmrpVIfStatTable'
The (conceptual) table listing the router's DVMRP virtual interface
statistical counters. snDvmrpEnable must be 'enabled' before this
table is read.
snDvmrpVIfStatEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1
An entry (conceptual row) in the snDvmrpVIfStatTable.
Column Syntax OID
The ifIndex value of this DVMRP virtual interface.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1
The number of packets that have arrived on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2
The number of packets that have been sent on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3
The number of octets that have arrived on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4
The number of octets that have been sent on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5
The number of probe packets that have arrived
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6
The number of probe packets that have been sent
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7
The number of probe packets that have been discarded
by the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8
The number of route update packets that have arrived
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9
The number of route update packets that have been sent
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10
The number of route update packets that have been
discarded by the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11
The number of graft packets that have arrived
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12
The number of graft packets that have been sent
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13
The number of graft packets that have been discarded
by the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14
The number of graft acknowledge packets that have arrived
on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15
The number of graft acknowledge packets that have been
sent on the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16
The number of graft acknowledge packets that have been
discarded by the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17
The number of prune packets that have arrived on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18
The number of prune packets that have been sent on the DVMRP
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19
The number of prune packets that have been discarded
by the DVMRP virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20

snFsrpIfTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snFsrpIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snFsrpIfTable'
The FSRP Interface Table describes the interfaces from
the viewpoint of FSRP.
snFsrpIfEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1
The FSRP Interface Entry describes one interface from
the viewpoint of FSRP.
Column Syntax OID
snFsrpIfPortmandatory
The physical router port of this FSRP interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1
The IP Address of the physical router port of this
interface.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2
The IP Address of the Virtual Router for the interface.
The Virtual Router IP address need to be configured on
the interface before Redundant Router Function can operate
on the interface. This address has to be same o…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3
The IP Address of the Other Router on this ip subnet
that operates FSRP and to whom the Keep Alive message
need to be sent by this router. This object must be
configured for FSRP to work correctly
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4
The higher the number the higher the priority is.
This parameter decides which router should becomes
the Active Router for the interface. A Router with
higher priority selected to becomes the Active Router.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5
This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface w…
PortMaskr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting r…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7
snFsrpIfStatemandatory
This object specifies the FSRP Router's interface state as:
init(0)...initialization state.
negotiating(1)...negotiating state.
standby(2)...standby state.
active(3)...active state.
Enumeration
Enumerated Values:
0init
1negotiating
2standby
3active
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8
The heart-beat is from 1 to 120 seconds.
Integer32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9
The hold time of the Fsrp router is from 3 to 255 seconds.
Integer32r/w
Constraints:
range: 3-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10
This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface w…
OctetStringr/w
Constraints:
range: 32-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11
This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default va…
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.12

snPimVInterfaceTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimVInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimVInterfaceTable'
The (conceptual) table listing the router's PIM virtual
interfaces. snPimEnable must be 'enabled' before this
table is read or writen.
snPimVInterfaceEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1
An entry (conceptual row) in the snPimVInterfaceTable.
Column Syntax OID
The ifIndex value of this PIM virtual interface.
Integer32
Constraints:
range: 1-48
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1
The type of PIM virtual interface, whether it uses
a tunnel or a physical interface.
Enumerationr/w
Enumerated Values:
1tunnel
2subnet
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2
The IP address of the local end of this PIM virtual
interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3
The network mask for the IP address of the PIM
virtual interface. For a tunnel, this should be
0.0.0.0.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4
The IP address of the remote end of this PIM virtual
interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5
The Designated Router on this PIM virtual interface.
For point-to-point interfaces, this object has the
value 0.0.0.0.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6
This is the minimum time-to-live value to forward the packets
out of this interface.
Integer32r/w
Constraints:
range: 1-31
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting r…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8
The configured mode of this PIM interface.
Enumerationr/w
Enumerated Values:
1dense
2sparse
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.9

snPimNeighborTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimNeighborTable'
The (conceptual) table listing the router's PIM
neighbors. snPimEnable must be 'enabled' before this
table is read.
snPimNeighborEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1
An entry (conceptual row) in the snPimNeighborTable.
Column Syntax OID
The table entry index.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1
The value of VifIndex for the virtual interface used to
reach this PIM neighbor.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2
The IP address of the PIM neighbor for which this entry
contains information.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3
The time since this PIM neighbor (last) became a neighbor
of the local router.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4
The minimum time remaining before this PIM neighbor will
be aged out.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5

snPimVIfStatTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9 · 1 row entry · 19 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimVIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimVIfStatTable'
The (conceptual) table listing the router's PIM virtual
interface statistical counters. snPimEnable must be
'enabled' before this table is read.
snPimVIfStatEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1
An entry (conceptual row) in the snPimVIfStatTable.
Column Syntax OID
The ifIndex value of this PIM virtual interface.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1
The number of join packets that have arrived
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2
The number of join packets that have been sent
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3
The number of join packets that have been discarded
by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4
The number of prune packets that have arrived on the PIM
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5
The number of prune packets that have been sent on the PIM
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6
The number of prune packets that have been discarded
by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7
The number of assert packets that have arrived
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8
The number of assert packets that have been sent
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9
The number of assert packets that have been
discarded by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10
The number of hello packets that have arrived on the PIM
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11
The number of hello packets that have been sent on the PIM
virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12
The number of hello packets that have been discarded
by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13
The number of graft packets that have arrived
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14
The number of graft packets that have been sent
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15
The number of graft packets that have been discarded
by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16
The number of graft acknowledge packets that have arrived
on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17
The number of graft acknowledge packets that have been
sent on the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18
The number of graft acknowledge packets that have been
discarded by the PIM virtual interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19

snPimCandidateBSRTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimCandidateBSRTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimCandidateBSRTable'
Candidate Bootstrap Router information.
snPimCandidateBSREntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1
An entry (conceptual row) in the snPimCandidateBSRTable.
Column Syntax OID
The IP address of the PIM interface.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.1
The (unicast) address of the Candidate BSR.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.2
The hash mask value for this router as a candidate
bootstrap router.
Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.3
The preference value for this router as a candidate
bootstrap router.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.4

snPimRPSetTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimRPSetTable'
The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.
 snPimEnable must be 'enabled' before this
table is read or writen.
snPimRPSetEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1
An entry (conceptual row) in the snPimRPSetTable.
Column Syntax OID
The IP multicast group address which, when combined with
snPimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.1
The multicast group address mask which, when combined with
snPimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.2
The IP address of the Candidate-RP.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.3
The holdtime, in seconds, of a Candidate-RP. If the
local router is not the BSR, this value is 0.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.4

snPimCandidateRPTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snPimCandidateRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snPimCandidateRPTable'
The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
 snPimEnable must be 'enabled' before this
table is read or writen.
snPimCandidateRPEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1
An entry (conceptual row) in the snPimCandidateRPTable.
Column Syntax OID
The IP multicast group address which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.1
The multicast group address mask which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.2
The (unicast) address of the interface which will be
advertised as a Candidate-RP.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.3
The status of this row, by which new entries may be
created, or old entries deleted from this table.
This object is used to create and delete row in the
table and control if they are used. The values that
can be wri…
Enumerationr/w
Enumerated Values:
0noSuch
1other
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.4

snLoopbackIntfConfigTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snLoopbackIntfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-MIB::snLoopbackIntfConfigTable'
Loopback Interface Config table.
snLoopbackIntfConfigEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1
An entry in the Loopback Interface Config table.
Column Syntax OID
The port index for Loopback Interface config entry.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1
The Loopback Interface mode.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row…
Enumerationr/w
Enumerated Values:
1invalid
2valid
3delete
4create
5modify
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3