HP-SN-IP-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
35

snAgAclTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2 · 1 row entry · 29 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snAgAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-ACL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-ACL-MIB::snAgAclTable' 
Table of Access Control List
snAgAclEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1
An entry in the IP access control list table.
Indexes
Column Syntax OID
snAgAclIndex
The access control list item number for an entry.
This is a unique number that identifies different
Access list entries combined with the access list
name and access list number. This one has to be
unique even though t…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.1
snAgAclNumber
The access control list number for an entry.
The standard access list is in the range <1..99>.
The extended access list is in the range <100-199>.
AclNumberr/w
Type Constraints:
range: 1..199
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.2
snAgAclName
ACL name for an entry.
DisplayStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.3
snAgAclAction
Action to take if the ip packet matches
with this access control list.
Actionr/w
Type Values:
0deny
1permit
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.4
snAgAclProtocol
Transport protocol. 0 means any protocol.
IpProtocolr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.5
snAgAclSourceIp
Source IP address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.6
snAgAclSourceMask
Source IP subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7
snAgAclSourceOperator
Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number
Operatorr/w
Type Values:
0eq
1neq
2lt
3gt
4range
7undefined
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.8
snAgAclSourceOperand1
For now this only refers to transport
protocol port number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.9
snAgAclSourceOperand2
For now this only refers to transport
protocol port number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.10
snAgAclDestinationIp
Destination IP address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.11
snAgAclDestinationMask
Destination IP subnet mask.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.12
snAgAclDestinationOperator
Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number
Operatorr/w
Type Values:
0eq
1neq
2lt
3gt
4range
7undefined
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.13
snAgAclDestinationOperand1
For now this only refers to transport
protocol port number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.14
snAgAclDestinationOperand2
For now this only refers to transport
protocol port number. 0 means NA
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.15
snAgAclPrecedence
This refers to IP precedence value in the range <0-7>
critical(5),
flash(3),
flash-override(4),
immediate(2),
internet(6),
network(7),
priority(1),
routine(0)
PrecedenceValuer/w
Type Values:
0routine
1priority
2immediate
3flash
4flashoverride
5critical
6internet
7network
8undefined
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.16
snAgAclTos
This refers to the IP type of service value in range
<0-15> which is the sum of numeric vlaues of the
following options -
match packets with maximum reliability TOS (2)
match packets with maximum throughput TOS (4)
mat…
TosValuer/w
Type Values:
0normal
1minMonetaryCost
2maxReliability
3tosValue3
4maxThroughput
5tosValue5
6tosValue6
7tosValue7
8minDelay
9tosValue9
10tosValue10
11tosValue11
12tosValue12
13tosValue13
14tosValue14
15tosValue15
16undefined
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.17
snAgAclEstablished
Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol.
RtrStatusr/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.18
snAgAclLogOption
Log flag
TruthValr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.19
snAgAclStandardFlag
Return whether the ACL is standard or extended, 1 for standard ACL
TruthValr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.20
snAgAclRowStatus
To create or delete a access list
entry.
SnRowStatusr/w
Type Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.21
snAgAclFlowCounter
Approximate count of flows matching individual ACL entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.22
snAgAclPacketCounter
Accurate count of packets matching individual ACL entry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.23
snAgAclComments
Remark description of individual ACL entry.
DisplayStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.24
snAgAclIpPriority
QoS priority option for IP ACL entry.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.25
snAgAclPriorityForce
Force packet outgoing priority. Not defined(4)
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.26
snAgAclPriorityMapping
Map incoming packet priority. Not defined(8)
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.27
snAgAclDscpMarking
Mark packets with given DSCP value. Not defined(64)
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.28
snAgAclDscpMapping
Map incoming DSCP value. Not defined(64)
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.29

snAgAclBindToPortTable

table
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk snAgAclBindToPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-IP-ACL-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-IP-ACL-MIB::snAgAclBindToPortTable' 
Table of ACL binding to port for router
snAgAclBindToPortEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1
An entry in the ACL-binding-to-port table.
Indexes
Column Syntax OID
snAgAclPortNum
Binding-to port num, either physical port or virtual interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.1
snAgAclPortBindDirection
ACL port direction, inbound or outbound
Direction
Type Values:
0inbound
1outbound
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.2
snAgAclNum
Defined ACL number
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.3
snAgAclNameString
Defined ACL name
DisplayStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.4
snAgBindPortListInVirtualInterface
Port list for binding virtual interface
OctetStringr/w .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.5
snAgAclPortRowStatus
To create or delete a ACL port entry.
SnRowStatusr/w
Type Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.6