HP-ICF-VIRTUAL-NETWORK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

hpicfVirtualNetworkTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.107.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfVirtualNetworkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-VIRTUAL-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-VIRTUAL-NETWORK-MIB::hpicfVirtualNetworkTable' 
Table containing information about virtual networks.
hpicfVirtualNetworkEntry row .1.3.6.1.4.1.11.2.14.11.5.1.107.1.2.1
An entry containing the information about a virtual network
and the associated VLAN.
Indexes
Column Syntax OID
hpicfVirtualNetworkID
This is a unique 24-bit segment ID referred to as a VXLAN
Network Identifier (VNI). It is included as a part of the VXLAN
encapsulation.
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.11.2.14.11.5.1.107.1.2.1.1
hpicfVirtualNetworkName
This object refers to the virtual network name. If the name is
not configured for a virtual network, the system will generate
a default name for the virtual network.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.107.1.2.1.2
hpicfVirtualNetworkVLANID
This object refers to the VLAN ID mapped to this virtual
network. A VLAN associated with a virtual network is known as
an overlay VLAN. Only one VLAN can be associated with a virtual
network and that VLAN should be an …
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.11.2.14.11.5.1.107.1.2.1.3
hpicfVirtualNetworkRowStatus
The status of a row for a virtual network entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.107.1.2.1.4

hpicfVXLANTunnelIfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfVXLANTunnelIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-VIRTUAL-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-VIRTUAL-NETWORK-MIB::hpicfVXLANTunnelIfTable' 
Table containing additional information about VXLAN tunnels
hpicfVXLANTunnelIfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1
An entry containing additional information about a VXLAN tunnel.
Indexes
No indexes recorded
Column Syntax OID
hpicfVXLANTunnelIfDownReason
This object provides the information about the operational
status of a tunnel.
A value of none (0) indicates that the operational status is up.
A value of ifAdminDown(1) indicates that the interface is
administrative…
Enumeration
Enumerated Values:
0none
1ifAdminDown
2tepNotReachable
3resourceUnavailable
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.1
hpicfVXLANTunnelIfNextHopIpType
This object provides the address type for resolved next hop IP
address to reach the tunnel end point.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.2
hpicfVXLANTunnelIfNextHopIp
This object provides the resolved next hop IPv4 address to
reach the tunnel end point. A NULL address indicates that the
next hop IPv4 address is not resolved.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.3
hpicfVXLANTunnelIfNextHopInterface
This object provides next hop interface to reach the tunnel
end point. An empty string indicates that the next hop interface
is not resolved
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.4
hpicfVXLANTunnelIfNextHopPortName
This object provides the resolved port name to reach the tunnel
end point. An empty string indicates that the next hop port
name is not resolved.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.5
hpicfVXLANTunnelStatsRxPackets
This object provides the number of packets received on a tunnel
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.6
hpicfVXLANTunnelStatsTxPackets
This object provides the number of packets transmitted on a
tunnel interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.7
hpicfVXLANTunnelStatsClear
This object clears tunnel interface statistics when set
to TRUE. A GET request for this object always returns
FALSE.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.107.2.1.1.1.1.9