HP-ICF-SYSLOG-MIB Table View

A table containing the configuration parameters
pertaining to the hpicfSyslog applications serviced by an
SNMP agent.

hpicfSyslogControlEntry row .1.3.6.1.4.1.11.2.14.14.1.1.1.1

The configuration parameters pertaining to a Syslog
application.

Indexes

hpicfSyslogControlIndex

Column	Syntax	OID
hpicfSyslogControlIndex The Index that uniquely identifies the Syslog application in the hpicfSyslogControlTable. The value of the index for a Syslog application may not be the same across system reboots. Users and applications will need to …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.1
hpicfSyslogControlDescr A user definable description of the Syslog application. This description could be used by Syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the co…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.2
hpicfSyslogControlBindAddrType The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.3
hpicfSyslogControlBindAddr The specific address the Syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.4
hpicfSyslogControlRowStatus This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.5
hpicfSyslogControlBindAddrIsOobm This object indicates the specific address to which Syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.6
hpicfSyslogControlSmmLog This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the Sys…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.7
hpicfSyslogControlTransportProtocol The transport protocol used for the connection to the Syslog server associated with this row. The default value is UDP.	Enumerationr/w Enumerated Values: 1 udp 2 tcp 3 tls	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.8
hpicfSyslogControlDestinationPort The socket port used by the transport protocol to connect to the Syslog server associated with this row. The default Syslog port for UDP is 514, for TCP is 1470, and for TLS is 6514.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.9
hpicfSyslogControlFilterName The filter Name connected to the Syslog server.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.14.1.1.1.1.10

A table containing the Syslog severity statistics counter value.

hpicfSyslogSeverityCounterInfoEntry row .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1

The configuration parameters pertaining to a Syslog severity
statistics.

Indexes

hpicfSyslogSeverityTypeIndex

Column	Syntax	OID
hpicfSyslogSeverityTypeIndex The Index that uniquely identifies the Syslog severity type.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1
hpicfSyslogSeverityType The severity type for all the Syslog messages.	HpicfSyslogSeverity Type Values: 0 major 1 alert 2 critical 3 error 4 warning 5 notice 6 info 7 debug	.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2
hpicfSyslogSeverityCounter Number of messages transmitted per severity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3

A table containing the Syslog facility statistics counter values.

hpicfSyslogFacilityCounterInfoEntry row .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1

The configuration parameters pertaining to a Syslog facility
statistics.

Indexes

hpicfSyslogfacilityCounterIndex

Column	Syntax	OID
hpicfSyslogfacilityCounterIndex The Index that uniquely identifies the Syslog facility.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1
hpicfSyslogfacilityType The facility type for all the Syslog messages.	HpicfSyslogFacility Type Values: 0 kern 1 user 2 mail 3 daemon 4 auth 5 syslog 6 lpr 7 news 8 uucp 9 sys9 10 sys10 11 sys11 12 sys12 13 sys13 14 sys14 15 cron 16 local0 17 local1 18 local2 19 local3 20 local4 21 local5 22 local6 23 local7	.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2
hpicfSyslogfacilityCounter Number of Syslog messages transmitted per facilty.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3

A table containing the statistical information
pertaining to each Syslog server indexed by 
hpicfSyslogControlIndex.

hpicfSyslogServerStatisticsEntry row .1.3.6.1.4.1.11.2.14.14.1.1.6.1

The configuration parameters pertaining to a Syslog
application.

Indexes

hpicfSyslogControlIndex

Column	Syntax	OID
hpicfSyslogServerLogSent Number of Syslog messages sent by the Syslog sender.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.1
hpicfSyslogServerLogRecv Number of Syslog messages received by the Syslog Server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.2
hpicfSyslogServerLogRelay The number of messages processed by the Syslog relay.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.3
hpicfSyslogServerSendError Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.4
hpicfSyslogServerLogResend Number of Syslog messages re-transmitted successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.5
hpicfSyslogServerResendError Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitting the buffered Syslog messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.6
hpicfSyslogServerLogBuffered Current number of buffered Syslog messages that are ready to be transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.6.1.7

A table of entries containing configuration information
for transmitting alerts in Syslog messages.

hpicfSyslogAlertsEntry row .1.3.6.1.4.1.11.2.14.14.1.1.7.1.1

An entry in the 'hpicfSyslogAlertsTable'.

Indexes

hpicfSyslogAlertIndex

Column	Syntax	OID
hpicfSyslogAlertIndex The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch's running configuration.	Enumeration Enumerated Values: 1 runningCfgChg	.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1
hpicfSyslogAlertAdminStatus Indicates whether the Syslog application is permitted to generate given type of alerts in transmitted Syslog messages. Default is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2
hpicfSyslogAlertTransmitInterval Specifies the transmission interval in seconds for sending alerts in Syslog messages. Only one Syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit …	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3