HP-ICF-SYSLOG-MIB

        The MIB module for configuring and
monitoring Syslog applications.
        
The HP Syslog application sends Syslog messages.
    
Source file
HP-ICF-SYSLOG-MIB
Last revised
Identity
hpicfSyslogMIB
Base OID
1.3.6.1.4.1.11.2.14.14.1
Imported Objects
HP-ICF-OID hpicfSyslog
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-SYSLOG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-SYSLOG-MIB::hpicfSyslogMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-SYSLOG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-SYSLOG-MIB::hpicfSyslogMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (76)
.1.3.6.1.4.1.11.2.14.14.1
.1.3.6.1.4.1.11.2.14.14.1.0
.1.3.6.1.4.1.11.2.14.14.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.10
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.4
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.5
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.6
Enumeration
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.7
Enumeration
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.8
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.9
.1.3.6.1.4.1.11.2.14.14.1.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.2.1
.1.3.6.1.4.1.11.2.14.14.1.1.2.2
.1.3.6.1.4.1.11.2.14.14.1.1.2.3
.1.3.6.1.4.1.11.2.14.14.1.1.2.4
.1.3.6.1.4.1.11.2.14.14.1.1.2.5
.1.3.6.1.4.1.11.2.14.14.1.1.2.6
.1.3.6.1.4.1.11.2.14.14.1.1.2.7
Enumeration
.1.3.6.1.4.1.11.2.14.14.1.1.2.8
.1.3.6.1.4.1.11.2.14.14.1.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.3.1
.1.3.6.1.4.1.11.2.14.14.1.1.3.2
.1.3.6.1.4.1.11.2.14.14.1.1.3.3
.1.3.6.1.4.1.11.2.14.14.1.1.3.4
.1.3.6.1.4.1.11.2.14.14.1.1.3.5
OctetString
.1.3.6.1.4.1.11.2.14.14.1.1.3.6
.1.3.6.1.4.1.11.2.14.14.1.1.4
.1.3.6.1.4.1.11.2.14.14.1.1.4.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.4
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.5
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.6
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.7
.1.3.6.1.4.1.11.2.14.14.1.1.4.2
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.4.3
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.5
.1.3.6.1.4.1.11.2.14.14.1.1.5.1
.1.3.6.1.4.1.11.2.14.14.1.1.5.2
.1.3.6.1.4.1.11.2.14.14.1.1.5.3
.1.3.6.1.4.1.11.2.14.14.1.1.6
.1.3.6.1.4.1.11.2.14.14.1.1.6.1
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.1
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.4
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.5
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.6
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.7
.1.3.6.1.4.1.11.2.14.14.1.1.7
.1.3.6.1.4.1.11.2.14.14.1.1.7.1
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1
Enumeration
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3
.1.3.6.1.4.1.11.2.14.14.1.1.8
.1.3.6.1.4.1.11.2.14.14.1.1.8.1
.1.3.6.1.4.1.11.2.14.14.1.3
.1.3.6.1.4.1.11.2.14.14.1.3.1
.1.3.6.1.4.1.11.2.14.14.1.3.2
Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
Enumeration
kern(0)
user(1)
mail(2)
daemon(3)
auth(4)
syslog(5)
lpr(6)
news(7)
uucp(8)
sys9(9)
sys10(10)
sys11(11)
sys12(12)
sys13(13)
sys14(14)
cron(15)
local0(16)
local1(17)
local2(18)
local3(19)
local4(20)
local5(21)
local6(22)
local7(23)
Enumeration
ip-address(1)
hostname(2)
none(3)
Enumeration
major(0)
alert(1)
critical(2)
error(3)
warning(4)
notice(5)
info(6)
debug(7)
Enumeration
all-pass(0)
vlan(1)
ip(2)
igmp(3)
ipx(4)
stp(5)
system(6)
chassis(7)
console(8)
ports(9)
dhcp(10)
download(11)
tcp(12)
telnet(13)
timep(14)
tftp(15)
xmodem(16)
update(17)
mgr(18)
bridge(19)
snmp(20)
addrmgr(21)
agp(22)
fault(23)
ldbal(24)
garp(25)
gvrp(26)
cos(27)
lacp(28)
dhcpr(29)
stack(30)
dma(31)
sntp(32)
ieee8021x(33)
cdp(34)
auth(35)
tacacs(36)
radius(37)
ssh(38)
netinet(39)
ospf(40)
xrrp(41)
ssl(42)
ipaddrmgr(43)
macauth(44)
kms(45)
pim(46)
maclock(47)
acl(48)
udpf(49)
inst-mon(50)
udld(51)
hpesp(52)
lldp(53)
connfilt(54)
ratelim(55)
idm(56)
iplock(57)
dhcp-snoop(58)
vrrp(59)
usb(60)
licensing(61)
loop-protect(62)
sflow(63)
arp-protect(64)
dhcpv6c(65)
mtm(66)
mld(67)
dca(68)
qinq(69)
autorun(70)
ffi(71)
wsm(72)
dipld(73)
hpsm(74)
srcip(75)
policy(76)
oobm(77)
trmode(78)
ospf3(79)
dhcpv6r(80)
bgp(81)
ufd(82)
fips(83)
dt(84)
dcbx(85)
sftp(86)
stacking(87)
rfs(88)
testmode(89)
crypto(90)
slp(91)
ra-guard(92)
ecm(93)
hpespip(94)
mobility-agent(95)
securemode(96)
mSatProxy(97)
eSatProxy(98)
hpespcm(99)
openflow(100)
smart-link(101)
insysprog(102)
dhcp-server(103)
job(104)
dsnoopv6(105)
dipldv6(106)
servicetunnel(107)
tr069(108)
http(109)
vxlantunnel(110)
bpdu(111)
byod-redirect(112)
dldp(113)
macsec(114)
acct(115)
tls(116)
ripng(117)
arpthrottle(120)
ndsnoop(122)
ntp(123)
ipsla(124)
psDetect(125)
mdns(126)
mvrp(127)
rip(128)
bfd(129)
lldpmad(130)
captive-portal(131)
profile-manager(132)
vsf(133)
tunneledNode(134)
amp-server(135)
activate(136)
central(137)
ztpIpsec(138)
greTunnel(139)
userTnode(140)
vlanMad(141)
cfgRestore(143)
devOnboard(144)
httpProxy(145)
dfp(146)
authOrder(147)
caDownload(148)
estc(149)
Conformance Groups (20)
A collection of objects providing message related
statistics.
.1.3.6.1.4.1.11.2.14.14.1.3.1.1
A collection of objects representing the run time
parameters for the Syslog applications.
.1.3.6.1.4.1.11.2.14.14.1.3.1.2
A collection of objects representing the priority
groupings of hpicfSyslog messages.
.1.3.6.1.4.1.11.2.14.14.1.3.1.3
A collection of notifications about the operational
state of a Syslog application.
.1.3.6.1.4.1.11.2.14.14.1.3.1.5
A collection of objects representing the run time
parameters for the OOBM aware Syslog applications.
.1.3.6.1.4.1.11.2.14.14.1.3.1.6
A collection of objects representing the general statistics
counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.7
A collection of objects representing the severity statistics
counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.8
A collection of objects representing the facility statistics
counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.9
A collection of objects representing the log message for the
standby module.
.1.3.6.1.4.1.11.2.14.14.1.3.1.10
A collection of objects representing the log message information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.11
A collection of objects representing the run time
parameters for the transport applications.
.1.3.6.1.4.1.11.2.14.14.1.3.1.12
A collection of objects representing the server specific
statistics counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.13
A collection of object for Syslog priority.
.1.3.6.1.4.1.11.2.14.14.1.3.1.14
A collection of objects representing Syslog alerts information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.15
An object for syslog origin ID.
.1.3.6.1.4.1.11.2.14.14.1.3.1.16
A collection of objects representing the log message information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.17
A collection of objects for local command logging.
.1.3.6.1.4.1.11.2.14.14.1.3.1.18
A collection of objects representing the log message information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.19
Objects representing the filter name.
.1.3.6.1.4.1.11.2.14.14.1.3.1.20
Object representing the prefix string.
.1.3.6.1.4.1.11.2.14.14.1.3.1.23
Compliance Statements (18)

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.1
The compliance statement for SNMP entities which
implement the SYSLOG-MIB with support for writable
objects and notifications. Such an implementation can
be both monitored and configured via SNMP. It can
also send notifications about change in the
operational status of the Syslog application.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.2
The compliance statement for SNMP entities which
implement the SYSLOG-MIB with support for writable
objects. Such an implementation can
be both monitored and configured via SNMP.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.4
The compliance statement for SNMP entities which
implement the hpicfSyslog MIB without support
for read-write (i.e. in read-only mode). It can
also send notifications about change in the
operational status of the Syslog application.
Required groups
Object refinements
ObjectAccessSyntaxDescription
hpicfSyslogControlDescr readonly
Write access is not required.
hpicfSyslogControlBindAddrType readonly
Write access is not required.
hpicfSyslogControlBindAddr readonly
Write access is not required.
hpicfSyslogControlRowStatus readonly
Write access is not required.

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.5
The compliance statement for SNMP entities which
implement the hpicfSyslog MIB without support
for read-write (i.e. in read-only mode).
Required groups
Object refinements
ObjectAccessSyntaxDescription
hpicfSyslogControlDescr readonly
Write access is not required.
hpicfSyslogControlBindAddrType readonly
Write access is not required.
hpicfSyslogControlBindAddr readonly
Write access is not required.
hpicfSyslogControlRowStatus readonly
Write access is not required.
hpicfSyslogPriorityDescr readonly
Write access is not required.

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.7
The compliance statement for SNMP entities
which implement the SYSLOG-MIB and support
only notifications about change in the
operational status of a Syslog application.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.8
The compliance statement for Syslog server configuration
with support for OOBM.
Required groups
optional hpicfSyslogControlGroupOobm This group is optional if there is no OOBM port
on device.

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.9
The compliance statement for SNMP entities
which implement the Syslog statistics.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.10
The compliance statement for Syslog
log messages for standby module.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.11
The compliance statement for Syslog
transport .
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.12
The compliance statement for Syslog
priority .
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.13
The compliance statement for syslog
server statistics .
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.14
The compliance statement for Syslog alerts.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.15
The compliance statement for syslog
origin id.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.16
The compliance statement for Syslog
log messages for standby module.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.17
The compliance statement for Syslog
command logging .
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.18
The compliance statement for Syslog
log messages for standby module.
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.19
The compliance statement for Syslog
Filter Name .
Required groups

OID .1.3.6.1.4.1.11.2.14.14.1.3.2.22
The compliance statement for Syslog
Prefix String.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.11.2.14.14.1.0.1
This notification is sent when any of the objects
listed are accessed. For example, when the first server
address is entered, the application
starts [hpicfSyslogOperationsStatus is ''started'' ]. When
the last server address is removed, the Syslog application
stops [hpicfSyslogOperationsStatus is ''stopped''].
The value of hpicfSyslogOperationsStatus will be the
new status of the Syslog application after the change.
Another example, when a server address is added, a
notification is sent indicating the index used to store
the row information, as well as the address type,
the address itself, the description if given , and the
row status.