HP-ICF-SRCIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
5

hpicfSrcIpAddrPolicyTable

table
.1.3.6.1.4.1.11.2.14.11.1.13.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfSrcIpAddrPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-SRCIP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-SRCIP-MIB::hpicfSrcIpAddrPolicyTable' 
A table of entries used to configure the policy for
selecting source IP address for different application
protocols while transmitting the protocol specific IP
packets. When the entry is configured the outgoing IP
packets generated by the corresponding application
protocol will have the source IP address field modified
based on the configured policy option.
hpicfSrcIpAddrPolicyEntry row .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1
An entry in the 'hpicfSrcIpAddrPolicyTable' containing
information about a source IP address selection policy.
Indexes
Column Syntax OID
hpicfSrcIpAddressType
Type of IP address. The only values expected are ipv4
or ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.1
hpicfSrcIpProtocolIndex
The application protocol index value which uniquely
identifies a row in the 'hpicfSrcIpAddrPolicyTable'.
Enumeration
Enumerated Values:
1tacacs
2radius
3syslog
4telnet
5tftp
6sntp
7sflow
8tunnelednodeserver
9radsec
10central
 .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.2
hpicfSrcIpAddrPolicy
The policy for selecting the source IP address.
outgoingInterface - the IP address of outgoing
interface should be used as
the source. This is the
defa…
Enumerationr/w
Enumerated Values:
1outgoingInterface
2configuredIpAddr
3configuredInterface
 .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.3
hpicfSrcIpAddrIfIndex
Index of IP interface whose IP address should be used
as source IP while sending application protocol packets.
On multi-netted interface the lexicographically lowest
IP address will be used. This object should be used …
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.4
hpicfSrcIpAddress
Administratively assigned IP address that should be used
as source while sending application protocol packets.
This object should be used in conjunction with the
'hpicfSrcIpAddrPolicy' MIB object.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5